! Started logfile: /image_prod/ug002_uva//J2219+2613_S_dfm.log on Thu Mar  5 05:37:23 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2219+2613_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2219+2613_S_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.857037 visibilities/baseline/integration-bin.
! Found source: J2219+2613
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6942 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2219+2613_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009682Jy  sigma=8.739677
! Fit after  self-cal, rms=0.874133Jy  sigma=7.569254
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.851 mas, bmaj=6.29 mas, bpa=-10.24 degrees
! Estimated noise=1.47897 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0982997 Jy
! Component: 100  -  total flux cleaned = 0.121346 Jy
! Total flux subtracted in 100 components = 0.121346 Jy
! Clean residual min=-0.005043 max=0.008779 Jy/beam
! Clean residual mean=-0.000009 rms=0.001276 Jy/beam
! Combined flux in latest and established models = 0.121346 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.121346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063663Jy  sigma=0.450845
! Fit after  self-cal, rms=0.063648Jy  sigma=0.450766
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00936566 Jy
! Component: 100  -  total flux cleaned = 0.0129563 Jy
! Total flux subtracted in 100 components = 0.0129563 Jy
! Clean residual min=-0.003936 max=0.006618 Jy/beam
! Clean residual mean=-0.000004 rms=0.001070 Jy/beam
! Combined flux in latest and established models = 0.134302 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 17 components and 0.134302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062347Jy  sigma=0.437804
! Fit after  self-cal, rms=0.062319Jy  sigma=0.437591
! Inverting map 
! Added new window around map position (0, -10.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00636932 Jy
! Component: 100  -  total flux cleaned = 0.00769092 Jy
! Total flux subtracted in 100 components = 0.00769092 Jy
! Clean residual min=-0.003852 max=0.004321 Jy/beam
! Clean residual mean=-0.000003 rms=0.000944 Jy/beam
! Combined flux in latest and established models = 0.141993 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 26 components and 0.141993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061855Jy  sigma=0.431144
! Fit after  self-cal, rms=0.061770Jy  sigma=0.430501
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.39 mas, bmaj=6.983 mas, bpa=-10.7 degrees
! Estimated noise=1.02128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240783 Jy
! Component: 100  -  total flux cleaned = 0.00292642 Jy
! Component: 150  -  total flux cleaned = 0.00303042 Jy
! Component: 200  -  total flux cleaned = 0.00307404 Jy
! Total flux subtracted in 200 components = 0.00307404 Jy
! Clean residual min=-0.003102 max=0.002831 Jy/beam
! Clean residual mean=-0.000005 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.145067 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 45 components and 0.145067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061659Jy  sigma=0.428679
! Fit after  self-cal, rms=0.061643Jy  sigma=0.428512
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.39 x 6.983 at -10.7 degrees (North through East)
! Clean map  min=-0.0029796  max=0.12592 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.97     KP        0.99     
!   LA        1.03     MK        0.97     NL        1.01     OV        1.04     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.97     KP        0.99     
!   LA        1.03     MK        0.98     NL        1.08     OV        1.04     
!   PT        0.99     SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.99     KP        0.99     
!   LA        1.00     MK        0.96     NL        1.19     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.061643Jy  sigma=0.428512
! Fit after  self-cal, rms=0.062118Jy  sigma=0.423961
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.352 mas, bmaj=6.945 mas, bpa=-10.58 degrees
! Estimated noise=1.02294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0007948 Jy
! Component: 100  -  total flux cleaned = 0.000937403 Jy
! Component: 150  -  total flux cleaned = 0.000966884 Jy
! Component: 200  -  total flux cleaned = 0.000940694 Jy
! Total flux subtracted in 200 components = 0.000940694 Jy
! Clean residual min=-0.002819 max=0.002730 Jy/beam
! Clean residual mean=-0.000007 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.146008 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 56 components and 0.146008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062046Jy  sigma=0.423779
! Fit after  self-cal, rms=0.062050Jy  sigma=0.423721
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062050Jy  sigma=0.423721
! Fit after  self-cal, rms=0.058355Jy  sigma=0.416248
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.344 mas, bmaj=6.929 mas, bpa=-10.5 degrees
! Estimated noise=1.02518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00061336 Jy
! Component: 100  -  total flux cleaned = 0.00063666 Jy
! Component: 150  -  total flux cleaned = 0.000677308 Jy
! Component: 200  -  total flux cleaned = 0.000730549 Jy
! Total flux subtracted in 200 components = 0.000730549 Jy
! Clean residual min=-0.001847 max=0.002072 Jy/beam
! Clean residual mean=-0.000007 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.146738 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 71 components and 0.146738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058329Jy  sigma=0.416120
! Fit after  self-cal, rms=0.058327Jy  sigma=0.416051
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-99.5, -19.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016182 Jy
! Component: 100  -  total flux cleaned = 0.0016239 Jy
! Component: 150  -  total flux cleaned = 0.00162472 Jy
! Component: 200  -  total flux cleaned = 0.00159897 Jy
! Total flux subtracted in 200 components = 0.00159897 Jy
! Clean residual min=-0.001784 max=0.001677 Jy/beam
! Clean residual mean=-0.000005 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.148337 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 91 components and 0.148337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058263Jy  sigma=0.415556
! Fit after  self-cal, rms=0.058263Jy  sigma=0.415517
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058263Jy  sigma=0.415517
! Fit after  self-cal, rms=0.057481Jy  sigma=0.414959
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.342 mas, bmaj=6.908 mas, bpa=-10.46 degrees
! Estimated noise=1.0236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000402779 Jy
! Component: 100  -  total flux cleaned = 0.000697993 Jy
! Component: 150  -  total flux cleaned = 0.000783195 Jy
! Component: 200  -  total flux cleaned = 0.00082092 Jy
! Total flux subtracted in 200 components = 0.00082092 Jy
! Clean residual min=-0.001817 max=0.001654 Jy/beam
! Clean residual mean=-0.000005 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.149158 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 105 components and 0.149158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057459Jy  sigma=0.414819
! Fit after  self-cal, rms=0.057455Jy  sigma=0.414805
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000100648 Jy
! Component: 100  -  total flux cleaned = 0.000100575 Jy
! Component: 150  -  total flux cleaned = 0.000118279 Jy
! Component: 200  -  total flux cleaned = 0.000150297 Jy
! Total flux subtracted in 200 components = 0.000150297 Jy
! Clean residual min=-0.001792 max=0.001672 Jy/beam
! Clean residual mean=-0.000005 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.149309 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 117 components and 0.149309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057443Jy  sigma=0.414733
! Fit after  self-cal, rms=0.057445Jy  sigma=0.414729
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057445Jy  sigma=0.414729
! Fit after  self-cal, rms=0.057419Jy  sigma=0.414712
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.672 mas, bmaj=9.993 mas, bpa=-13.79 degrees
! Estimated noise=1.25491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.02794e-05 Jy
! Component: 100  -  total flux cleaned = 0.000141373 Jy
! Component: 150  -  total flux cleaned = 0.00021071 Jy
! Component: 200  -  total flux cleaned = 0.00027168 Jy
! Total flux subtracted in 200 components = 0.00027168 Jy
! Clean residual min=-0.001942 max=0.001973 Jy/beam
! Clean residual mean=-0.000011 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.14958 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 131 components and 0.14958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057416Jy  sigma=0.414690
! Fit after  self-cal, rms=0.057417Jy  sigma=0.414684
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.2866e-05 Jy
! Component: 100  -  total flux cleaned = 8.38925e-05 Jy
! Component: 150  -  total flux cleaned = 7.41027e-05 Jy
! Component: 200  -  total flux cleaned = 6.472e-05 Jy
! Total flux subtracted in 200 components = 6.472e-05 Jy
! Clean residual min=-0.001932 max=0.001944 Jy/beam
! Clean residual mean=-0.000012 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.149645 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 139 components and 0.149645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057416Jy  sigma=0.414686
! Fit after  self-cal, rms=0.057418Jy  sigma=0.414684
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.342 mas, bmaj=6.896 mas, bpa=-10.44 degrees
! Estimated noise=1.02402 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.342 x 6.896 at -10.44 degrees (North through East)
! Clean map  min=-0.0018009  max=0.12633 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.812 mas, bmaj=6.233 mas, bpa=-10.1 degrees
! Estimated noise=1.47569 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0979834 Jy
! Component: 100  -  total flux cleaned = 0.121794 Jy
! Component: 150  -  total flux cleaned = 0.132752 Jy
! Component: 200  -  total flux cleaned = 0.139016 Jy
! Total flux subtracted in 200 components = 0.139016 Jy
! Clean residual min=-0.002902 max=0.003524 Jy/beam
! Clean residual mean=-0.000007 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.139016 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.139016 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.342 mas, bmaj=6.896 mas, bpa=-10.44 degrees
! Estimated noise=1.02402 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00425181 Jy
! Component: 100  -  total flux cleaned = 0.00686937 Jy
! Component: 150  -  total flux cleaned = 0.00863796 Jy
! Component: 200  -  total flux cleaned = 0.00958956 Jy
! Total flux subtracted in 200 components = 0.00958956 Jy
! Clean residual min=-0.001861 max=0.001726 Jy/beam
! Clean residual mean=-0.000005 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.148606 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 47 components and 0.148606 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.672 mas, bmaj=9.993 mas, bpa=-13.79 degrees
! Estimated noise=1.25491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000762865 Jy
! Component: 100  -  total flux cleaned = 0.000831121 Jy
! Component: 150  -  total flux cleaned = 0.000938487 Jy
! Component: 200  -  total flux cleaned = 0.00102648 Jy
! Total flux subtracted in 200 components = 0.00102648 Jy
! Clean residual min=-0.002083 max=0.002031 Jy/beam
! Clean residual mean=-0.000011 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.149632 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.73657e-05 Jy
! Component: 100  -  total flux cleaned = 0.000106449 Jy
! Component: 150  -  total flux cleaned = 0.000107016 Jy
! Component: 200  -  total flux cleaned = 0.000120624 Jy
! Total flux subtracted in 200 components = 0.000120624 Jy
! Clean residual min=-0.002033 max=0.001991 Jy/beam
! Clean residual mean=-0.000011 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.149753 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 93 components and 0.149753 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.342 mas, bmaj=6.896 mas, bpa=-10.44 degrees
! Estimated noise=1.02402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000257783 Jy
! Component: 100  -  total flux cleaned = 0.000286882 Jy
! Component: 150  -  total flux cleaned = 0.000313918 Jy
! Component: 200  -  total flux cleaned = 0.000339355 Jy
! Total flux subtracted in 200 components = 0.000339355 Jy
! Clean residual min=-0.001920 max=0.001585 Jy/beam
! Clean residual mean=-0.000005 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.150092 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 108 components and 0.150092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057447Jy  sigma=0.414993
! Fit after  self-cal, rms=0.057443Jy  sigma=0.414945
wmodel J2219+2613_S_map.mod
! Writing 108 model components to file: J2219+2613_S_map.mod
wobs   J2219+2613_S_uvs.fits
! Writing UV FITS file: J2219+2613_S_uvs.fits
wwins  J2219+2613_S_map.win
! wwins: Wrote 3 windows to J2219+2613_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000576428 Jy
! Component: 100  -  total flux cleaned = -0.000518067 Jy
! Component: 150  -  total flux cleaned = -0.000545003 Jy
! Component: 200  -  total flux cleaned = -0.000384278 Jy
! Component: 250  -  total flux cleaned = -0.000280619 Jy
! Component: 300  -  total flux cleaned = -8.00826e-05 Jy
! Component: 350  -  total flux cleaned = 4.14036e-05 Jy
! Component: 400  -  total flux cleaned = 8.88069e-05 Jy
! Component: 450  -  total flux cleaned = 0.000181323 Jy
! Component: 500  -  total flux cleaned = 0.000294304 Jy
! Component: 550  -  total flux cleaned = 0.000382246 Jy
! Component: 600  -  total flux cleaned = 0.000359975 Jy
! Component: 650  -  total flux cleaned = 0.000338975 Jy
! Component: 700  -  total flux cleaned = 0.000297174 Jy
! Component: 750  -  total flux cleaned = 0.000276578 Jy
! Component: 800  -  total flux cleaned = 0.000195342 Jy
! Component: 850  -  total flux cleaned = 9.58484e-05 Jy
! Component: 900  -  total flux cleaned = 3.72716e-05 Jy
! Component: 950  -  total flux cleaned = -2.03081e-05 Jy
! Component: 1000  -  total flux cleaned = -1.99724e-05 Jy
! Component: 1050  -  total flux cleaned = -2.01023e-05 Jy
! Component: 1100  -  total flux cleaned = -9.3054e-05 Jy
! Component: 1150  -  total flux cleaned = -5.6669e-05 Jy
! Component: 1200  -  total flux cleaned = -7.40654e-05 Jy
! Component: 1250  -  total flux cleaned = -5.63526e-05 Jy
! Component: 1300  -  total flux cleaned = -9.12204e-05 Jy
! Component: 1350  -  total flux cleaned = -5.68621e-05 Jy
! Component: 1400  -  total flux cleaned = -7.35719e-05 Jy
! Component: 1450  -  total flux cleaned = -8.99825e-05 Jy
! Component: 1500  -  total flux cleaned = -2.40059e-05 Jy
! Component: 1550  -  total flux cleaned = -2.42726e-05 Jy
! Component: 1600  -  total flux cleaned = -2.42612e-05 Jy
! Component: 1650  -  total flux cleaned = -3.98134e-05 Jy
! Component: 1700  -  total flux cleaned = 2.29423e-05 Jy
! Component: 1750  -  total flux cleaned = 7.41709e-06 Jy
! Component: 1800  -  total flux cleaned = 5.33745e-05 Jy
! Component: 1850  -  total flux cleaned = 5.34903e-05 Jy
! Component: 1900  -  total flux cleaned = 8.34976e-05 Jy
! Component: 1950  -  total flux cleaned = 6.87674e-05 Jy
! Component: 2000  -  total flux cleaned = 0.000113002 Jy
! Component: 2050  -  total flux cleaned = 9.84361e-05 Jy
! Component: 2100  -  total flux cleaned = 0.000141762 Jy
! Component: 2150  -  total flux cleaned = 0.000156052 Jy
! Component: 2200  -  total flux cleaned = 0.000155969 Jy
! Component: 2250  -  total flux cleaned = 0.000128054 Jy
! Component: 2300  -  total flux cleaned = 0.000183674 Jy
! Component: 2350  -  total flux cleaned = 0.000114713 Jy
! Component: 2400  -  total flux cleaned = 0.000169111 Jy
! Component: 2450  -  total flux cleaned = 0.000115109 Jy
! Component: 2500  -  total flux cleaned = 0.000128505 Jy
! Component: 2550  -  total flux cleaned = 0.000101844 Jy
! Component: 2600  -  total flux cleaned = 6.25716e-05 Jy
! Component: 2650  -  total flux cleaned = 4.96173e-05 Jy
! Component: 2700  -  total flux cleaned = 7.571e-05 Jy
! Component: 2750  -  total flux cleaned = 5.01578e-05 Jy
! Component: 2800  -  total flux cleaned = 3.7492e-05 Jy
! Component: 2850  -  total flux cleaned = 2.51285e-05 Jy
! Component: 2900  -  total flux cleaned = 2.51551e-05 Jy
! Component: 2950  -  total flux cleaned = 1.28049e-05 Jy
! Component: 3000  -  total flux cleaned = 4.95758e-05 Jy
! Component: 3050  -  total flux cleaned = 3.72088e-05 Jy
! Component: 3100  -  total flux cleaned = 2.49252e-05 Jy
! Component: 3150  -  total flux cleaned = -1.10593e-05 Jy
! Component: 3200  -  total flux cleaned = 9.84864e-07 Jy
! Component: 3250  -  total flux cleaned = -2.26792e-05 Jy
! Component: 3300  -  total flux cleaned = 4.78285e-05 Jy
! Component: 3350  -  total flux cleaned = 2.46313e-05 Jy
! Component: 3400  -  total flux cleaned = 1.30683e-05 Jy
! Component: 3450  -  total flux cleaned = 3.60956e-05 Jy
! Component: 3500  -  total flux cleaned = 3.60937e-05 Jy
! Component: 3550  -  total flux cleaned = 2.47564e-05 Jy
! Component: 3600  -  total flux cleaned = 2.47603e-05 Jy
! Component: 3650  -  total flux cleaned = 4.70344e-05 Jy
! Component: 3700  -  total flux cleaned = 0.000102518 Jy
! Component: 3750  -  total flux cleaned = 8.03542e-05 Jy
! Component: 3800  -  total flux cleaned = 9.12344e-05 Jy
! Component: 3850  -  total flux cleaned = 5.85977e-05 Jy
! Component: 3900  -  total flux cleaned = 6.94096e-05 Jy
! Component: 3950  -  total flux cleaned = 9.09243e-05 Jy
! Component: 4000  -  total flux cleaned = 9.09771e-05 Jy
! Component: 4050  -  total flux cleaned = 6.97176e-05 Jy
! Total flux subtracted in 4096 components = 9.09015e-05 Jy
! Clean residual min=-0.000587 max=0.000589 Jy/beam
! Clean residual mean=-0.000002 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.150183 Jy
keep
! Adding 317 model components to the UV plane model.
! The established model now contains 425 components and 0.150183 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2219+2613_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.342 x 6.896 at -10.44 degrees (North through East)
! Clean map  min=-0.0013137  max=0.12607 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2219+2613_S_map.fits
wmodel /image_prod/ug002_uva//J2219+2613_S_map.mod
! Writing 425 model components to file: /image_prod/ug002_uva//J2219+2613_S_map.mod
wobs   /image_prod/ug002_uva//J2219+2613_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2219+2613_S_uvs.fits
wwins  /image_prod/ug002_uva//J2219+2613_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2219+2613_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.126075 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000197147 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.46912 0.46912 0.938239 1.87648 3.75296 7.50591 15.0118 30.0237 60.0473
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.126 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  639.495 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2219+2613_S_dfm.log closed on Thu Mar  5 05:37:27 2020