! Started logfile: /image_prod/ug002_uva//J2219+2120_S_dfm.log on Thu Mar  5 05:37:02 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2219+2120_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2219+2120_S_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.856296 visibilities/baseline/integration-bin.
! Found source: J2219+2120
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6936 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2219+2120_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006407Jy  sigma=8.826462
! Fit after  self-cal, rms=0.939902Jy  sigma=8.261090
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.757 mas, bmaj=6.551 mas, bpa=-10.86 degrees
! Estimated noise=1.35098 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0472601 Jy
! Component: 100  -  total flux cleaned = 0.0578305 Jy
! Total flux subtracted in 100 components = 0.0578305 Jy
! Clean residual min=-0.003661 max=0.003876 Jy/beam
! Clean residual mean=0.000021 rms=0.000895 Jy/beam
! Combined flux in latest and established models = 0.0578305 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0578305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063663Jy  sigma=0.444565
! Fit after  self-cal, rms=0.063078Jy  sigma=0.439337
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.388 mas, bmaj=7.198 mas, bpa=-9.524 degrees
! Estimated noise=1.01291 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00309647 Jy
! Component: 100  -  total flux cleaned = 0.00318423 Jy
! Component: 150  -  total flux cleaned = 0.0031251 Jy
! Component: 200  -  total flux cleaned = 0.00296835 Jy
! Total flux subtracted in 200 components = 0.00296835 Jy
! Clean residual min=-0.002839 max=0.003355 Jy/beam
! Clean residual mean=0.000034 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.0607988 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 15 components and 0.0607988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062727Jy  sigma=0.437483
! Fit after  self-cal, rms=0.062702Jy  sigma=0.437451
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.388 x 7.198 at -9.524 degrees (North through East)
! Clean map  min=-0.0027885  max=0.060897 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.95     KP        1.00     
!   LA        1.06     MK        1.01     NL        0.94     OV        1.06     
!   PT        1.09     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.97     HN        0.94     KP        1.01     
!   LA        1.05     MK        1.02     NL        0.94     OV        0.97     
!   PT        1.09     SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.02     KP        0.97     
!   LA        0.93     MK        0.99     NL        1.03     OV        1.12     
!   PT        1.16     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.062702Jy  sigma=0.437451
! Fit after  self-cal, rms=0.059930Jy  sigma=0.435205
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.364 mas, bmaj=7.071 mas, bpa=-8.956 degrees
! Estimated noise=1.00602 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015698 Jy
! Component: 100  -  total flux cleaned = 0.00161068 Jy
! Component: 150  -  total flux cleaned = 0.0015538 Jy
! Component: 200  -  total flux cleaned = 0.0014795 Jy
! Total flux subtracted in 200 components = 0.0014795 Jy
! Clean residual min=-0.002713 max=0.003009 Jy/beam
! Clean residual mean=0.000033 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.0622783 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.0622783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059858Jy  sigma=0.434808
! Fit after  self-cal, rms=0.059830Jy  sigma=0.434689
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059830Jy  sigma=0.434689
! Fit after  self-cal, rms=0.058521Jy  sigma=0.424871
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.351 mas, bmaj=7.065 mas, bpa=-8.649 degrees
! Estimated noise=1.00964 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000656241 Jy
! Component: 100  -  total flux cleaned = 0.000776717 Jy
! Component: 150  -  total flux cleaned = 0.000864283 Jy
! Component: 200  -  total flux cleaned = 0.000942666 Jy
! Total flux subtracted in 200 components = 0.000942666 Jy
! Clean residual min=-0.001686 max=0.001943 Jy/beam
! Clean residual mean=0.000006 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.063221 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 35 components and 0.063221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058511Jy  sigma=0.424769
! Fit after  self-cal, rms=0.058636Jy  sigma=0.424326
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-34, -100.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000613372 Jy
! Component: 100  -  total flux cleaned = 0.000570118 Jy
! Component: 150  -  total flux cleaned = 0.000383912 Jy
! Component: 200  -  total flux cleaned = 0.000264307 Jy
! Total flux subtracted in 200 components = 0.000264307 Jy
! Clean residual min=-0.001626 max=0.001731 Jy/beam
! Clean residual mean=0.000008 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0634853 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 53 components and 0.0634853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058550Jy  sigma=0.423636
! Fit after  self-cal, rms=0.058555Jy  sigma=0.423579
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058555Jy  sigma=0.423579
! Fit after  self-cal, rms=0.059599Jy  sigma=0.423399
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.347 mas, bmaj=7.051 mas, bpa=-8.577 degrees
! Estimated noise=1.00739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.59788e-05 Jy
! Component: 100  -  total flux cleaned = 1.55554e-05 Jy
! Component: 150  -  total flux cleaned = -3.47828e-05 Jy
! Component: 200  -  total flux cleaned = -5.86983e-05 Jy
! Total flux subtracted in 200 components = -5.86983e-05 Jy
! Clean residual min=-0.001519 max=0.001794 Jy/beam
! Clean residual mean=0.000003 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.0634266 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 60 components and 0.0634266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059572Jy  sigma=0.423213
! Fit after  self-cal, rms=0.059594Jy  sigma=0.423194
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (54.5, -118.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754744 Jy
! Component: 100  -  total flux cleaned = 0.000575639 Jy
! Component: 150  -  total flux cleaned = 0.000577228 Jy
! Component: 200  -  total flux cleaned = 0.000551921 Jy
! Total flux subtracted in 200 components = 0.000551921 Jy
! Clean residual min=-0.001426 max=0.001433 Jy/beam
! Clean residual mean=0.000003 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.0639785 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 76 components and 0.0639785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059540Jy  sigma=0.422730
! Fit after  self-cal, rms=0.059544Jy  sigma=0.422689
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059544Jy  sigma=0.422689
! Fit after  self-cal, rms=0.059493Jy  sigma=0.422658
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.512 mas, bmaj=10.15 mas, bpa=-10.05 degrees
! Estimated noise=1.2493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.65243e-05 Jy
! Component: 100  -  total flux cleaned = 0.000285473 Jy
! Component: 150  -  total flux cleaned = 0.000434349 Jy
! Component: 200  -  total flux cleaned = 0.000515013 Jy
! Total flux subtracted in 200 components = 0.000515013 Jy
! Clean residual min=-0.001615 max=0.001428 Jy/beam
! Clean residual mean=0.000006 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.0644936 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 96 components and 0.0644935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059477Jy  sigma=0.422567
! Fit after  self-cal, rms=0.059476Jy  sigma=0.422554
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137596 Jy
! Component: 100  -  total flux cleaned = 0.000227024 Jy
! Component: 150  -  total flux cleaned = 0.000254016 Jy
! Component: 200  -  total flux cleaned = 0.000266329 Jy
! Total flux subtracted in 200 components = 0.000266329 Jy
! Clean residual min=-0.001629 max=0.001427 Jy/beam
! Clean residual mean=0.000006 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.0647599 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 102 components and 0.0647599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059467Jy  sigma=0.422517
! Fit after  self-cal, rms=0.059469Jy  sigma=0.422515
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.348 mas, bmaj=7.034 mas, bpa=-8.431 degrees
! Estimated noise=1.0062 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.348 x 7.034 at -8.431 degrees (North through East)
! Clean map  min=-0.0015131  max=0.060607 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.741 mas, bmaj=6.423 mas, bpa=-9.798 degrees
! Estimated noise=1.3349 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0470867 Jy
! Component: 100  -  total flux cleaned = 0.0575766 Jy
! Component: 150  -  total flux cleaned = 0.0616579 Jy
! Component: 200  -  total flux cleaned = 0.0637845 Jy
! Total flux subtracted in 200 components = 0.0637845 Jy
! Clean residual min=-0.002418 max=0.002452 Jy/beam
! Clean residual mean=0.000002 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.0637845 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0637845 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.348 mas, bmaj=7.034 mas, bpa=-8.431 degrees
! Estimated noise=1.0062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000888077 Jy
! Component: 100  -  total flux cleaned = 0.00132384 Jy
! Component: 150  -  total flux cleaned = 0.00158533 Jy
! Component: 200  -  total flux cleaned = 0.00167701 Jy
! Total flux subtracted in 200 components = 0.00167701 Jy
! Clean residual min=-0.001682 max=0.001522 Jy/beam
! Clean residual mean=0.000004 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.0654615 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 47 components and 0.0654615 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.512 mas, bmaj=10.15 mas, bpa=-10.05 degrees
! Estimated noise=1.2493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000434458 Jy
! Component: 100  -  total flux cleaned = -0.000406403 Jy
! Component: 150  -  total flux cleaned = -0.000299205 Jy
! Component: 200  -  total flux cleaned = -0.000227945 Jy
! Total flux subtracted in 200 components = -0.000227945 Jy
! Clean residual min=-0.001684 max=0.001481 Jy/beam
! Clean residual mean=0.000007 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.0652336 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.08602e-05 Jy
! Component: 100  -  total flux cleaned = 5.91284e-05 Jy
! Component: 150  -  total flux cleaned = 4.17967e-05 Jy
! Component: 200  -  total flux cleaned = 5.80986e-05 Jy
! Total flux subtracted in 200 components = 5.80986e-05 Jy
! Clean residual min=-0.001683 max=0.001434 Jy/beam
! Clean residual mean=0.000006 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.0652917 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 76 components and 0.0652917 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.348 mas, bmaj=7.034 mas, bpa=-8.431 degrees
! Estimated noise=1.0062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.90803e-05 Jy
! Component: 100  -  total flux cleaned = 3.0205e-05 Jy
! Component: 150  -  total flux cleaned = -2.4284e-05 Jy
! Component: 200  -  total flux cleaned = -9.99549e-05 Jy
! Total flux subtracted in 200 components = -9.99549e-05 Jy
! Clean residual min=-0.001527 max=0.001434 Jy/beam
! Clean residual mean=0.000003 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.0651917 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 91 components and 0.0651917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059496Jy  sigma=0.422774
! Fit after  self-cal, rms=0.059505Jy  sigma=0.422747
wmodel J2219+2120_S_map.mod
! Writing 91 model components to file: J2219+2120_S_map.mod
wobs   J2219+2120_S_uvs.fits
! Writing UV FITS file: J2219+2120_S_uvs.fits
wwins  J2219+2120_S_map.win
! wwins: Wrote 3 windows to J2219+2120_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.14835e-05 Jy
! Component: 100  -  total flux cleaned = 0.000109301 Jy
! Component: 150  -  total flux cleaned = 0.000183355 Jy
! Component: 200  -  total flux cleaned = 0.000159171 Jy
! Component: 250  -  total flux cleaned = 0.000206287 Jy
! Component: 300  -  total flux cleaned = 0.000297195 Jy
! Component: 350  -  total flux cleaned = 0.000319418 Jy
! Component: 400  -  total flux cleaned = 0.000341189 Jy
! Component: 450  -  total flux cleaned = 0.000320082 Jy
! Component: 500  -  total flux cleaned = 0.000299117 Jy
! Component: 550  -  total flux cleaned = 0.000258295 Jy
! Component: 600  -  total flux cleaned = 0.000157747 Jy
! Component: 650  -  total flux cleaned = 7.88729e-05 Jy
! Component: 700  -  total flux cleaned = 1.40827e-06 Jy
! Component: 750  -  total flux cleaned = -5.5717e-05 Jy
! Component: 800  -  total flux cleaned = -9.33706e-05 Jy
! Component: 850  -  total flux cleaned = -0.000186397 Jy
! Component: 900  -  total flux cleaned = -0.000223143 Jy
! Component: 950  -  total flux cleaned = -0.000367989 Jy
! Component: 1000  -  total flux cleaned = -0.000331841 Jy
! Component: 1050  -  total flux cleaned = -0.000384974 Jy
! Component: 1100  -  total flux cleaned = -0.000454889 Jy
! Component: 1150  -  total flux cleaned = -0.000472066 Jy
! Component: 1200  -  total flux cleaned = -0.000523081 Jy
! Component: 1250  -  total flux cleaned = -0.000573487 Jy
! Component: 1300  -  total flux cleaned = -0.000623304 Jy
! Component: 1350  -  total flux cleaned = -0.00060675 Jy
! Component: 1400  -  total flux cleaned = -0.000655668 Jy
! Component: 1450  -  total flux cleaned = -0.000671734 Jy
! Component: 1500  -  total flux cleaned = -0.000719334 Jy
! Component: 1550  -  total flux cleaned = -0.000672047 Jy
! Component: 1600  -  total flux cleaned = -0.000687767 Jy
! Component: 1650  -  total flux cleaned = -0.000703378 Jy
! Component: 1700  -  total flux cleaned = -0.000734057 Jy
! Component: 1750  -  total flux cleaned = -0.00074932 Jy
! Component: 1800  -  total flux cleaned = -0.000734474 Jy
! Component: 1850  -  total flux cleaned = -0.000734223 Jy
! Component: 1900  -  total flux cleaned = -0.000705004 Jy
! Component: 1950  -  total flux cleaned = -0.000690585 Jy
! Component: 2000  -  total flux cleaned = -0.000733792 Jy
! Component: 2050  -  total flux cleaned = -0.000733929 Jy
! Component: 2100  -  total flux cleaned = -0.000762132 Jy
! Component: 2150  -  total flux cleaned = -0.000818046 Jy
! Component: 2200  -  total flux cleaned = -0.000790426 Jy
! Component: 2250  -  total flux cleaned = -0.000803947 Jy
! Component: 2300  -  total flux cleaned = -0.000871919 Jy
! Component: 2350  -  total flux cleaned = -0.00083131 Jy
! Component: 2400  -  total flux cleaned = -0.0008312 Jy
! Component: 2450  -  total flux cleaned = -0.000884165 Jy
! Component: 2500  -  total flux cleaned = -0.000870969 Jy
! Component: 2550  -  total flux cleaned = -0.000884154 Jy
! Component: 2600  -  total flux cleaned = -0.000923001 Jy
! Component: 2650  -  total flux cleaned = -0.00088451 Jy
! Component: 2700  -  total flux cleaned = -0.000884487 Jy
! Component: 2750  -  total flux cleaned = -0.000859082 Jy
! Component: 2800  -  total flux cleaned = -0.000871566 Jy
! Component: 2850  -  total flux cleaned = -0.000821685 Jy
! Component: 2900  -  total flux cleaned = -0.000846503 Jy
! Component: 2950  -  total flux cleaned = -0.000785216 Jy
! Component: 3000  -  total flux cleaned = -0.000760857 Jy
! Component: 3050  -  total flux cleaned = -0.000748846 Jy
! Component: 3100  -  total flux cleaned = -0.000712779 Jy
! Component: 3150  -  total flux cleaned = -0.000689164 Jy
! Component: 3200  -  total flux cleaned = -0.000665588 Jy
! Component: 3250  -  total flux cleaned = -0.000642101 Jy
! Component: 3300  -  total flux cleaned = -0.000630392 Jy
! Component: 3350  -  total flux cleaned = -0.00060726 Jy
! Component: 3400  -  total flux cleaned = -0.000572643 Jy
! Component: 3450  -  total flux cleaned = -0.000572592 Jy
! Component: 3500  -  total flux cleaned = -0.000572452 Jy
! Component: 3550  -  total flux cleaned = -0.000538629 Jy
! Component: 3600  -  total flux cleaned = -0.000549816 Jy
! Component: 3650  -  total flux cleaned = -0.000560817 Jy
! Component: 3700  -  total flux cleaned = -0.000505662 Jy
! Component: 3750  -  total flux cleaned = -0.000483826 Jy
! Component: 3800  -  total flux cleaned = -0.000527456 Jy
! Component: 3850  -  total flux cleaned = -0.000505764 Jy
! Component: 3900  -  total flux cleaned = -0.000473605 Jy
! Component: 3950  -  total flux cleaned = -0.000462882 Jy
! Component: 4000  -  total flux cleaned = -0.000452224 Jy
! Component: 4050  -  total flux cleaned = -0.000452251 Jy
! Total flux subtracted in 4096 components = -0.000431245 Jy
! Clean residual min=-0.000601 max=0.000551 Jy/beam
! Clean residual mean=0.000002 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.0647605 Jy
keep
! Adding 281 model components to the UV plane model.
! The established model now contains 372 components and 0.0647605 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2219+2120_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.348 x 7.034 at -8.431 degrees (North through East)
! Clean map  min=-0.0014768  max=0.060187 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2219+2120_S_map.fits
wmodel /image_prod/ug002_uva//J2219+2120_S_map.mod
! Writing 372 model components to file: /image_prod/ug002_uva//J2219+2120_S_map.mod
wobs   /image_prod/ug002_uva//J2219+2120_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2219+2120_S_uvs.fits
wwins  /image_prod/ug002_uva//J2219+2120_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2219+2120_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0601872 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000189815 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.946122 0.946122 1.89224 3.78449 7.56897 15.1379 30.2759 60.5518
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.06 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  317.083 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2219+2120_S_dfm.log closed on Thu Mar  5 05:37:05 2020