! Started logfile: /image_prod/ug002_uva//J2219+1806_S_dfm.log on Thu Mar  5 05:36:51 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2219+1806_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2219+1806_S_uva.fits
! AN table 1: 112 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.838542 visibilities/baseline/integration-bin.
! Found source: J2219+1806
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 10143 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2219+1806_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.036613Jy  sigma=8.671297
! Fit after  self-cal, rms=0.772269Jy  sigma=6.541571
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.964 mas, bmaj=10.44 mas, bpa=-20.13 degrees
! Estimated noise=1.38353 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.17605 Jy
! Component: 100  -  total flux cleaned = 0.21444 Jy
! Total flux subtracted in 100 components = 0.21444 Jy
! Clean residual min=-0.007244 max=0.010709 Jy/beam
! Clean residual mean=-0.000007 rms=0.002212 Jy/beam
! Combined flux in latest and established models = 0.21444 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.21444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076660Jy  sigma=0.513107
! Fit after  self-cal, rms=0.076654Jy  sigma=0.513083
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.461 mas, bmaj=11.21 mas, bpa=-19.14 degrees
! Estimated noise=0.868083 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00995341 Jy
! Component: 100  -  total flux cleaned = 0.0113551 Jy
! Component: 150  -  total flux cleaned = 0.0108367 Jy
! Component: 200  -  total flux cleaned = 0.0102153 Jy
! Total flux subtracted in 200 components = 0.0102153 Jy
! Clean residual min=-0.006258 max=0.006977 Jy/beam
! Clean residual mean=-0.000001 rms=0.001717 Jy/beam
! Combined flux in latest and established models = 0.224655 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.224655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074710Jy  sigma=0.504391
! Fit after  self-cal, rms=0.074704Jy  sigma=0.504353
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.461 x 11.21 at -19.14 degrees (North through East)
! Clean map  min=-0.00603  max=0.22708 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.99     
!   LA        1.05     MK        1.02     NL        1.03     OV        1.01     
!   PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.96     KP        1.00     
!   LA        1.04     MK        1.02     NL        0.97     OV        0.90     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.94     KP        0.99     
!   LA        1.06     MK        1.02     NL        1.15     OV        1.00     
!   PT        1.01     
! 
! 
! Fit before self-cal, rms=0.074704Jy  sigma=0.504353
! Fit after  self-cal, rms=0.072701Jy  sigma=0.490318
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.467 mas, bmaj=11.14 mas, bpa=-19.09 degrees
! Estimated noise=0.871948 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206041 Jy
! Component: 100  -  total flux cleaned = 0.0026236 Jy
! Component: 150  -  total flux cleaned = 0.00289543 Jy
! Component: 200  -  total flux cleaned = 0.00304503 Jy
! Total flux subtracted in 200 components = 0.00304503 Jy
! Clean residual min=-0.006585 max=0.006068 Jy/beam
! Clean residual mean=-0.000011 rms=0.001620 Jy/beam
! Combined flux in latest and established models = 0.2277 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 43 components and 0.2277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072516Jy  sigma=0.490285
! Fit after  self-cal, rms=0.072529Jy  sigma=0.490233
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072529Jy  sigma=0.490233
! Fit after  self-cal, rms=0.059709Jy  sigma=0.439881
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=11.12 mas, bpa=-19.04 degrees
! Estimated noise=0.872294 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000903155 Jy
! Component: 100  -  total flux cleaned = 0.00139541 Jy
! Component: 150  -  total flux cleaned = 0.00150627 Jy
! Component: 200  -  total flux cleaned = 0.00160204 Jy
! Total flux subtracted in 200 components = 0.00160204 Jy
! Clean residual min=-0.001635 max=0.001550 Jy/beam
! Clean residual mean=0.000000 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.229303 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.229303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059692Jy  sigma=0.439753
! Fit after  self-cal, rms=0.059708Jy  sigma=0.439575
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.3838e-05 Jy
! Component: 100  -  total flux cleaned = 5.68922e-05 Jy
! Component: 150  -  total flux cleaned = 5.6987e-05 Jy
! Component: 200  -  total flux cleaned = 6.7562e-05 Jy
! Total flux subtracted in 200 components = 6.7562e-05 Jy
! Clean residual min=-0.001650 max=0.001527 Jy/beam
! Clean residual mean=0.000000 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.22937 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 66 components and 0.22937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059703Jy  sigma=0.439540
! Fit after  self-cal, rms=0.059702Jy  sigma=0.439536
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059702Jy  sigma=0.439536
! Fit after  self-cal, rms=0.059262Jy  sigma=0.438393
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.465 mas, bmaj=11.13 mas, bpa=-19.03 degrees
! Estimated noise=0.871479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000436417 Jy
! Component: 100  -  total flux cleaned = 0.000526292 Jy
! Component: 150  -  total flux cleaned = 0.000569883 Jy
! Component: 200  -  total flux cleaned = 0.000594013 Jy
! Total flux subtracted in 200 components = 0.000594013 Jy
! Clean residual min=-0.001463 max=0.001293 Jy/beam
! Clean residual mean=-0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.229964 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 78 components and 0.229964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059253Jy  sigma=0.438308
! Fit after  self-cal, rms=0.059249Jy  sigma=0.438302
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.78942e-05 Jy
! Component: 100  -  total flux cleaned = 1.86022e-05 Jy
! Component: 150  -  total flux cleaned = 1.88174e-05 Jy
! Component: 200  -  total flux cleaned = 1.08417e-05 Jy
! Total flux subtracted in 200 components = 1.08417e-05 Jy
! Clean residual min=-0.001457 max=0.001311 Jy/beam
! Clean residual mean=-0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.229975 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.229975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059246Jy  sigma=0.438282
! Fit after  self-cal, rms=0.059246Jy  sigma=0.438281
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059246Jy  sigma=0.438281
! Fit after  self-cal, rms=0.059224Jy  sigma=0.438253
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.439 mas, bmaj=11.77 mas, bpa=-16.47 degrees
! Estimated noise=1.03803 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.73837e-05 Jy
! Component: 100  -  total flux cleaned = -4.25426e-05 Jy
! Component: 150  -  total flux cleaned = -5.45623e-05 Jy
! Component: 200  -  total flux cleaned = -5.94663e-05 Jy
! Total flux subtracted in 200 components = -5.94663e-05 Jy
! Clean residual min=-0.001568 max=0.001493 Jy/beam
! Clean residual mean=-0.000002 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.229915 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 96 components and 0.229915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059226Jy  sigma=0.438243
! Fit after  self-cal, rms=0.059224Jy  sigma=0.438241
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.85138e-07 Jy
! Component: 100  -  total flux cleaned = -8.97148e-06 Jy
! Component: 150  -  total flux cleaned = -2.18753e-05 Jy
! Component: 200  -  total flux cleaned = -2.96644e-05 Jy
! Total flux subtracted in 200 components = -2.96644e-05 Jy
! Clean residual min=-0.001550 max=0.001492 Jy/beam
! Clean residual mean=-0.000002 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.229886 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 110 components and 0.229886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059225Jy  sigma=0.438244
! Fit after  self-cal, rms=0.059225Jy  sigma=0.438243
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.463 mas, bmaj=11.13 mas, bpa=-19.01 degrees
! Estimated noise=0.871359 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.463 x 11.13 at -19.01 degrees (North through East)
! Clean map  min=-0.0014934  max=0.22763 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.965 mas, bmaj=10.34 mas, bpa=-20.06 degrees
! Estimated noise=1.39183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.177099 Jy
! Component: 100  -  total flux cleaned = 0.215718 Jy
! Component: 150  -  total flux cleaned = 0.224259 Jy
! Component: 200  -  total flux cleaned = 0.227023 Jy
! Total flux subtracted in 200 components = 0.227023 Jy
! Clean residual min=-0.002505 max=0.002766 Jy/beam
! Clean residual mean=-0.000002 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.227023 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.227023 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.463 mas, bmaj=11.13 mas, bpa=-19.01 degrees
! Estimated noise=0.871359 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238151 Jy
! Component: 100  -  total flux cleaned = 0.0026638 Jy
! Component: 150  -  total flux cleaned = 0.00293686 Jy
! Component: 200  -  total flux cleaned = 0.00304619 Jy
! Total flux subtracted in 200 components = 0.00304619 Jy
! Clean residual min=-0.001556 max=0.001355 Jy/beam
! Clean residual mean=-0.000001 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.230069 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 38 components and 0.230069 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.439 mas, bmaj=11.77 mas, bpa=-16.47 degrees
! Estimated noise=1.03803 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000328677 Jy
! Component: 100  -  total flux cleaned = 0.000330274 Jy
! Component: 150  -  total flux cleaned = 0.000302244 Jy
! Component: 200  -  total flux cleaned = 0.000290286 Jy
! Total flux subtracted in 200 components = 0.000290286 Jy
! Clean residual min=-0.001638 max=0.001474 Jy/beam
! Clean residual mean=-0.000002 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.230359 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.05059e-05 Jy
! Component: 100  -  total flux cleaned = -4.87916e-05 Jy
! Component: 150  -  total flux cleaned = -8.28086e-05 Jy
! Component: 200  -  total flux cleaned = -0.000106071 Jy
! Total flux subtracted in 200 components = -0.000106071 Jy
! Clean residual min=-0.001603 max=0.001472 Jy/beam
! Clean residual mean=-0.000002 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.230253 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 59 components and 0.230253 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.463 mas, bmaj=11.13 mas, bpa=-19.01 degrees
! Estimated noise=0.871359 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000216377 Jy
! Component: 100  -  total flux cleaned = 0.00024168 Jy
! Component: 150  -  total flux cleaned = 0.000218234 Jy
! Component: 200  -  total flux cleaned = 0.000207616 Jy
! Total flux subtracted in 200 components = 0.000207616 Jy
! Clean residual min=-0.001492 max=0.001327 Jy/beam
! Clean residual mean=-0.000001 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.230461 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 74 components and 0.230461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059221Jy  sigma=0.438234
! Fit after  self-cal, rms=0.059222Jy  sigma=0.438231
wmodel J2219+1806_S_map.mod
! Writing 74 model components to file: J2219+1806_S_map.mod
wobs   J2219+1806_S_uvs.fits
! Writing UV FITS file: J2219+1806_S_uvs.fits
wwins  J2219+1806_S_map.win
! wwins: Wrote 1 windows to J2219+1806_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000407065 Jy
! Component: 100  -  total flux cleaned = -0.000664425 Jy
! Component: 150  -  total flux cleaned = -0.000730852 Jy
! Component: 200  -  total flux cleaned = -0.000730098 Jy
! Component: 250  -  total flux cleaned = -0.000828677 Jy
! Component: 300  -  total flux cleaned = -0.000790531 Jy
! Component: 350  -  total flux cleaned = -0.0007723 Jy
! Component: 400  -  total flux cleaned = -0.000790411 Jy
! Component: 450  -  total flux cleaned = -0.000789956 Jy
! Component: 500  -  total flux cleaned = -0.000755836 Jy
! Component: 550  -  total flux cleaned = -0.00080658 Jy
! Component: 600  -  total flux cleaned = -0.00082278 Jy
! Component: 650  -  total flux cleaned = -0.000838852 Jy
! Component: 700  -  total flux cleaned = -0.000902281 Jy
! Component: 750  -  total flux cleaned = -0.000948601 Jy
! Component: 800  -  total flux cleaned = -0.000979191 Jy
! Component: 850  -  total flux cleaned = -0.00100923 Jy
! Component: 900  -  total flux cleaned = -0.00103881 Jy
! Component: 950  -  total flux cleaned = -0.00106779 Jy
! Component: 1000  -  total flux cleaned = -0.00106817 Jy
! Component: 1050  -  total flux cleaned = -0.00111027 Jy
! Component: 1100  -  total flux cleaned = -0.00116541 Jy
! Component: 1150  -  total flux cleaned = -0.00121969 Jy
! Component: 1200  -  total flux cleaned = -0.00135262 Jy
! Component: 1250  -  total flux cleaned = -0.00136578 Jy
! Component: 1300  -  total flux cleaned = -0.00146934 Jy
! Component: 1350  -  total flux cleaned = -0.0015587 Jy
! Component: 1400  -  total flux cleaned = -0.00162174 Jy
! Component: 1450  -  total flux cleaned = -0.00167142 Jy
! Component: 1500  -  total flux cleaned = -0.00175752 Jy
! Component: 1550  -  total flux cleaned = -0.00181817 Jy
! Component: 1600  -  total flux cleaned = -0.00181847 Jy
! Component: 1650  -  total flux cleaned = -0.00188995 Jy
! Component: 1700  -  total flux cleaned = -0.00194885 Jy
! Component: 1750  -  total flux cleaned = -0.00200706 Jy
! Component: 1800  -  total flux cleaned = -0.00206451 Jy
! Component: 1850  -  total flux cleaned = -0.00208742 Jy
! Component: 1900  -  total flux cleaned = -0.00212119 Jy
! Component: 1950  -  total flux cleaned = -0.00215469 Jy
! Component: 2000  -  total flux cleaned = -0.00216571 Jy
! Component: 2050  -  total flux cleaned = -0.00223111 Jy
! Component: 2100  -  total flux cleaned = -0.00227429 Jy
! Component: 2150  -  total flux cleaned = -0.0023063 Jy
! Component: 2200  -  total flux cleaned = -0.00236969 Jy
! Component: 2250  -  total flux cleaned = -0.00240118 Jy
! Component: 2300  -  total flux cleaned = -0.00248425 Jy
! Component: 2350  -  total flux cleaned = -0.00249457 Jy
! Component: 2400  -  total flux cleaned = -0.00258615 Jy
! Component: 2450  -  total flux cleaned = -0.00259618 Jy
! Component: 2500  -  total flux cleaned = -0.00265618 Jy
! Component: 2550  -  total flux cleaned = -0.0027158 Jy
! Component: 2600  -  total flux cleaned = -0.00274524 Jy
! Component: 2650  -  total flux cleaned = -0.00280378 Jy
! Component: 2700  -  total flux cleaned = -0.00287142 Jy
! Component: 2750  -  total flux cleaned = -0.00290983 Jy
! Component: 2800  -  total flux cleaned = -0.00298605 Jy
! Component: 2850  -  total flux cleaned = -0.00304274 Jy
! Component: 2900  -  total flux cleaned = -0.00309894 Jy
! Component: 2950  -  total flux cleaned = -0.00317333 Jy
! Component: 3000  -  total flux cleaned = -0.00325642 Jy
! Component: 3050  -  total flux cleaned = -0.00332965 Jy
! Component: 3100  -  total flux cleaned = -0.00339325 Jy
! Component: 3150  -  total flux cleaned = -0.00343834 Jy
! Component: 3200  -  total flux cleaned = -0.00351004 Jy
! Component: 3250  -  total flux cleaned = -0.00360773 Jy
! Component: 3300  -  total flux cleaned = -0.0036607 Jy
! Component: 3350  -  total flux cleaned = -0.00372199 Jy
! Component: 3400  -  total flux cleaned = -0.00380021 Jy
! Component: 3450  -  total flux cleaned = -0.0038519 Jy
! Component: 3500  -  total flux cleaned = -0.00390328 Jy
! Component: 3550  -  total flux cleaned = -0.00397993 Jy
! Component: 3600  -  total flux cleaned = -0.00406442 Jy
! Component: 3650  -  total flux cleaned = -0.0041064 Jy
! Component: 3700  -  total flux cleaned = -0.00418141 Jy
! Component: 3750  -  total flux cleaned = -0.00422279 Jy
! Component: 3800  -  total flux cleaned = -0.00428857 Jy
! Component: 3850  -  total flux cleaned = -0.0043621 Jy
! Component: 3900  -  total flux cleaned = -0.00443517 Jy
! Component: 3950  -  total flux cleaned = -0.00449968 Jy
! Component: 4000  -  total flux cleaned = -0.00458795 Jy
! Component: 4050  -  total flux cleaned = -0.00468348 Jy
! Total flux subtracted in 4096 components = -0.00470721 Jy
! Clean residual min=-0.000450 max=0.000451 Jy/beam
! Clean residual mean=-0.000000 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.225753 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 380 components and 0.225753 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2219+1806_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.463 x 11.13 at -19.01 degrees (North through East)
! Clean map  min=-0.0013684  max=0.2277 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2219+1806_S_map.fits
wmodel /image_prod/ug002_uva//J2219+1806_S_map.mod
! Writing 380 model components to file: /image_prod/ug002_uva//J2219+1806_S_map.mod
wobs   /image_prod/ug002_uva//J2219+1806_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2219+1806_S_uvs.fits
wwins  /image_prod/ug002_uva//J2219+1806_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J2219+1806_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.227696 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000148114 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.195148 0.195148 0.390295 0.78059 1.56118 3.12236 6.24472 12.4894 24.9789 49.9578 99.9155
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.227 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1537.3 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2219+1806_S_dfm.log closed on Thu Mar  5 05:36:54 2020