! Started logfile: /image_prod/ug002_uva//J2218-0335_X_dfm.log on Thu Mar 5 05:36:44 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2218-0335_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2218-0335_X_uva.fits ! AN table 1: 90 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.976049 visibilities/baseline/integration-bin. ! Found source: J2218-0335 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 47436 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2218-0335_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.586459Jy sigma=8.001513 ! Fit after self-cal, rms=0.490932Jy sigma=2.407703 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6586 mas, bmaj=1.635 mas, bpa=-2.034 degrees ! Estimated noise=1.13207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.78737 Jy ! Component: 100 - total flux cleaned = 1.01293 Jy ! Total flux subtracted in 100 components = 1.01293 Jy ! Clean residual min=-0.093016 max=0.226039 Jy/beam ! Clean residual mean=0.000026 rms=0.015048 Jy/beam ! Combined flux in latest and established models = 1.01293 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 1.01293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.474550Jy sigma=2.229579 ! Fit after self-cal, rms=0.474288Jy sigma=2.223192 ! Inverting map ! Added new window around map position (-0.8, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209701 Jy ! Component: 100 - total flux cleaned = 0.321172 Jy ! Total flux subtracted in 100 components = 0.321172 Jy ! Clean residual min=-0.089800 max=0.141189 Jy/beam ! Clean residual mean=0.000014 rms=0.009533 Jy/beam ! Combined flux in latest and established models = 1.33411 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 1.33411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.299836Jy sigma=1.428100 ! Fit after self-cal, rms=0.285001Jy sigma=1.329980 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0998538 Jy ! Component: 100 - total flux cleaned = 0.158405 Jy ! Total flux subtracted in 100 components = 0.158405 Jy ! Clean residual min=-0.057979 max=0.087224 Jy/beam ! Clean residual mean=0.000008 rms=0.006504 Jy/beam ! Combined flux in latest and established models = 1.49251 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 1.49251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.209340Jy sigma=0.999660 ! Fit after self-cal, rms=0.203048Jy sigma=0.956579 ! Inverting map ! Added new window around map position (0.8, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.06621 Jy ! Component: 100 - total flux cleaned = 0.0882765 Jy ! Total flux subtracted in 100 components = 0.0882765 Jy ! Clean residual min=-0.027947 max=0.033673 Jy/beam ! Clean residual mean=0.000004 rms=0.004613 Jy/beam ! Combined flux in latest and established models = 1.58079 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 1.58079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.164249Jy sigma=0.769668 ! Fit after self-cal, rms=0.163750Jy sigma=0.767729 ! Inverting map ! Added new window around map position (-1.6, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304992 Jy ! Component: 100 - total flux cleaned = 0.0431539 Jy ! Total flux subtracted in 100 components = 0.0431539 Jy ! Clean residual min=-0.022685 max=0.027005 Jy/beam ! Clean residual mean=0.000002 rms=0.004062 Jy/beam ! Combined flux in latest and established models = 1.62394 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 1.62394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147761Jy sigma=0.697024 ! Fit after self-cal, rms=0.147192Jy sigma=0.694429 ! Inverting map ! Added new window around map position (-1.8, -8.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244384 Jy ! Component: 100 - total flux cleaned = 0.0361023 Jy ! Total flux subtracted in 100 components = 0.0361023 Jy ! Clean residual min=-0.020248 max=0.023237 Jy/beam ! Clean residual mean=0.000002 rms=0.003730 Jy/beam ! Combined flux in latest and established models = 1.66004 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 1.66004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137524Jy sigma=0.653942 ! Fit after self-cal, rms=0.137380Jy sigma=0.652375 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8098 mas, bmaj=1.904 mas, bpa=-1.857 degrees ! Estimated noise=0.626956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346092 Jy ! Component: 100 - total flux cleaned = 0.056963 Jy ! Component: 150 - total flux cleaned = 0.0677584 Jy ! Component: 200 - total flux cleaned = 0.0773415 Jy ! Total flux subtracted in 200 components = 0.0773415 Jy ! Clean residual min=-0.021070 max=0.024645 Jy/beam ! Clean residual mean=0.000008 rms=0.004744 Jy/beam ! Combined flux in latest and established models = 1.73738 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 63 components and 1.73738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121682Jy sigma=0.598339 ! Fit after self-cal, rms=0.121379Jy sigma=0.595868 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8098 x 1.904 at -1.857 degrees (North through East) ! Clean map min=-0.019661 max=1.0324 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.03 KP 1.04 ! LA 1.02 MK 1.03 NL 1.09 OV 0.91 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.02 KP 1.04 ! LA 1.01 MK 1.02 NL 1.10 OV 0.92 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 1.05 ! LA 1.02 MK 1.03 NL 1.10 OV 0.92 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.02 KP 1.02 ! LA 1.03 MK 1.00 NL 1.10 OV 0.92 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.01 KP 1.03 ! LA 1.02 MK 1.00 NL 1.09 OV 0.92 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.03 ! LA 1.02 MK 1.01 NL 1.09 OV 0.84 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.00 KP 1.01 ! LA 1.01 MK 1.00 NL 1.08 OV 0.92 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 1.04 ! LA 1.01 MK 1.01 NL 1.07 OV 0.89 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.98 KP 1.02 ! LA 1.00 MK 1.00 NL 1.10 OV 0.91 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 0.99 KP 1.00 ! LA 1.01 MK 1.00 NL 1.08 OV 0.92 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.98 KP 1.03 ! LA 1.00 MK 0.99 NL 1.07 OV 0.92 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.97 KP 1.03 ! LA 1.02 MK 1.00 NL 1.08 OV 0.92 ! PT 0.90 SC 1.02 ! ! ! Fit before self-cal, rms=0.121379Jy sigma=0.595868 ! Fit after self-cal, rms=0.075925Jy sigma=0.415146 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8128 mas, bmaj=1.915 mas, bpa=-1.864 degrees ! Estimated noise=0.62766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242069 Jy ! Component: 100 - total flux cleaned = -0.000313502 Jy ! Component: 150 - total flux cleaned = -0.00220575 Jy ! Component: 200 - total flux cleaned = -0.00314396 Jy ! Total flux subtracted in 200 components = -0.00314396 Jy ! Clean residual min=-0.010226 max=0.012183 Jy/beam ! Clean residual mean=0.000002 rms=0.001813 Jy/beam ! Combined flux in latest and established models = 1.73424 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 1.73424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070895Jy sigma=0.382230 ! Fit after self-cal, rms=0.070802Jy sigma=0.380937 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070802Jy sigma=0.380937 ! Fit after self-cal, rms=0.066125Jy sigma=0.354828 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8124 mas, bmaj=1.918 mas, bpa=-1.896 degrees ! Estimated noise=0.628989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00388673 Jy ! Component: 100 - total flux cleaned = -0.00568417 Jy ! Component: 150 - total flux cleaned = -0.00696813 Jy ! Component: 200 - total flux cleaned = -0.00715651 Jy ! Total flux subtracted in 200 components = -0.00715651 Jy ! Clean residual min=-0.008184 max=0.008002 Jy/beam ! Clean residual mean=-0.000001 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 1.72708 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 99 components and 1.72708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064495Jy sigma=0.344726 ! Fit after self-cal, rms=0.064329Jy sigma=0.344076 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702394 Jy ! Component: 100 - total flux cleaned = 0.00804765 Jy ! Component: 150 - total flux cleaned = 0.00805496 Jy ! Component: 200 - total flux cleaned = 0.00836212 Jy ! Total flux subtracted in 200 components = 0.00836212 Jy ! Clean residual min=-0.007283 max=0.007591 Jy/beam ! Clean residual mean=-0.000002 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 1.73545 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 1.73545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063046Jy sigma=0.337461 ! Fit after self-cal, rms=0.062930Jy sigma=0.336834 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062930Jy sigma=0.336834 ! Fit after self-cal, rms=0.062164Jy sigma=0.332756 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8117 mas, bmaj=1.919 mas, bpa=-1.926 degrees ! Estimated noise=0.62973 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119091 Jy ! Component: 100 - total flux cleaned = -0.00137607 Jy ! Component: 150 - total flux cleaned = -0.00167597 Jy ! Component: 200 - total flux cleaned = -0.0018017 Jy ! Total flux subtracted in 200 components = -0.0018017 Jy ! Clean residual min=-0.006678 max=0.006624 Jy/beam ! Clean residual mean=-0.000003 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 1.73364 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 129 components and 1.73364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061271Jy sigma=0.327326 ! Fit after self-cal, rms=0.061156Jy sigma=0.326868 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218457 Jy ! Component: 100 - total flux cleaned = 0.000471987 Jy ! Component: 150 - total flux cleaned = 0.000472499 Jy ! Component: 200 - total flux cleaned = 0.000481549 Jy ! Total flux subtracted in 200 components = 0.000481549 Jy ! Clean residual min=-0.006425 max=0.006346 Jy/beam ! Clean residual mean=-0.000003 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 1.73412 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 140 components and 1.73412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060743Jy sigma=0.324300 ! Fit after self-cal, rms=0.060672Jy sigma=0.323950 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060672Jy sigma=0.323950 ! Fit after self-cal, rms=0.060471Jy sigma=0.322984 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.944 mas, bmaj=3.124 mas, bpa=-1.267 degrees ! Estimated noise=0.929518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246231 Jy ! Component: 100 - total flux cleaned = 0.0011355 Jy ! Component: 150 - total flux cleaned = 0.00138143 Jy ! Component: 200 - total flux cleaned = 0.00165772 Jy ! Total flux subtracted in 200 components = 0.00165772 Jy ! Clean residual min=-0.005206 max=0.005571 Jy/beam ! Clean residual mean=-0.000006 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 1.73578 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 159 components and 1.73578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060317Jy sigma=0.322312 ! Fit after self-cal, rms=0.060218Jy sigma=0.321786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000228446 Jy ! Component: 100 - total flux cleaned = 0.000335197 Jy ! Component: 150 - total flux cleaned = 0.00040207 Jy ! Component: 200 - total flux cleaned = 0.000455105 Jy ! Total flux subtracted in 200 components = 0.000455105 Jy ! Clean residual min=-0.005076 max=0.005269 Jy/beam ! Clean residual mean=-0.000006 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 1.73624 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 165 components and 1.73624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060073Jy sigma=0.321158 ! Fit after self-cal, rms=0.059993Jy sigma=0.320666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8115 mas, bmaj=1.92 mas, bpa=-1.931 degrees ! Estimated noise=0.630296 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8115 x 1.92 at -1.931 degrees (North through East) ! Clean map min=-0.016556 max=1.0259 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059993Jy sigma=0.320666 ! Fit after self-cal, rms=0.055982Jy sigma=0.294291 ! Inverting map and beam ! Estimated beam: bmin=0.8118 mas, bmaj=1.919 mas, bpa=-1.879 degrees ! Estimated noise=0.630649 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000909542 Jy ! Component: 100 - total flux cleaned = -0.000513303 Jy ! Component: 150 - total flux cleaned = -0.000514306 Jy ! Component: 200 - total flux cleaned = -0.000700149 Jy ! Total flux subtracted in 200 components = -0.000700149 Jy ! Clean residual min=-0.005885 max=0.005732 Jy/beam ! Clean residual mean=-0.000003 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 1.73554 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 171 components and 1.73554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055494Jy sigma=0.290957 ! Fit after self-cal, rms=0.055409Jy sigma=0.290558 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.74254e-05 Jy ! Component: 100 - total flux cleaned = -0.000392902 Jy ! Component: 150 - total flux cleaned = -0.000392674 Jy ! Component: 200 - total flux cleaned = -0.000393423 Jy ! Total flux subtracted in 200 components = -0.000393423 Jy ! Clean residual min=-0.005717 max=0.005595 Jy/beam ! Clean residual mean=-0.000003 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 1.73514 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 179 components and 1.73514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055154Jy sigma=0.288972 ! Fit after self-cal, rms=0.055104Jy sigma=0.288709 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055104Jy sigma=0.288709 ! Fit after self-cal, rms=0.054987Jy sigma=0.288169 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6587 mas, bmaj=1.646 mas, bpa=-2.065 degrees ! Estimated noise=1.15048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.81072 Jy ! Component: 100 - total flux cleaned = 1.12116 Jy ! Component: 150 - total flux cleaned = 1.28206 Jy ! Component: 200 - total flux cleaned = 1.38669 Jy ! Total flux subtracted in 200 components = 1.38669 Jy ! Clean residual min=-0.033938 max=0.058183 Jy/beam ! Clean residual mean=0.000011 rms=0.005678 Jy/beam ! Combined flux in latest and established models = 1.38669 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.38669 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8116 mas, bmaj=1.919 mas, bpa=-1.883 degrees ! Estimated noise=0.63117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109462 Jy ! Component: 100 - total flux cleaned = 0.180219 Jy ! Component: 150 - total flux cleaned = 0.228327 Jy ! Component: 200 - total flux cleaned = 0.261219 Jy ! Total flux subtracted in 200 components = 0.261219 Jy ! Clean residual min=-0.017118 max=0.018125 Jy/beam ! Clean residual mean=0.000005 rms=0.002428 Jy/beam ! Combined flux in latest and established models = 1.6479 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 1.6479 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180885 Jy ! Component: 100 - total flux cleaned = 0.0306889 Jy ! Component: 150 - total flux cleaned = 0.0407848 Jy ! Component: 200 - total flux cleaned = 0.0490534 Jy ! Total flux subtracted in 200 components = 0.0490534 Jy ! Clean residual min=-0.010855 max=0.008762 Jy/beam ! Clean residual mean=0.000000 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 1.69696 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 62 components and 1.69696 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.945 mas, bmaj=3.123 mas, bpa=-1.194 degrees ! Estimated noise=0.930479 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153686 Jy ! Component: 100 - total flux cleaned = 0.024972 Jy ! Component: 150 - total flux cleaned = 0.0316537 Jy ! Component: 200 - total flux cleaned = 0.036542 Jy ! Total flux subtracted in 200 components = 0.036542 Jy ! Clean residual min=-0.006534 max=0.004452 Jy/beam ! Clean residual mean=-0.000004 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 1.7335 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186467 Jy ! Component: 100 - total flux cleaned = 0.00302281 Jy ! Component: 150 - total flux cleaned = 0.00390114 Jy ! Component: 200 - total flux cleaned = 0.00448349 Jy ! Total flux subtracted in 200 components = 0.00448349 Jy ! Clean residual min=-0.005581 max=0.004750 Jy/beam ! Clean residual mean=-0.000005 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 1.73798 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 124 components and 1.73798 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8116 mas, bmaj=1.919 mas, bpa=-1.883 degrees ! Estimated noise=0.63117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00280797 Jy ! Component: 100 - total flux cleaned = -0.00305985 Jy ! Component: 150 - total flux cleaned = -0.00287997 Jy ! Component: 200 - total flux cleaned = -0.00220328 Jy ! Total flux subtracted in 200 components = -0.00220328 Jy ! Clean residual min=-0.007837 max=0.006093 Jy/beam ! Clean residual mean=-0.000002 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 1.73578 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 146 components and 1.73578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056283Jy sigma=0.296549 ! Fit after self-cal, rms=0.055755Jy sigma=0.292527 wmodel J2218-0335_X_map.mod ! Writing 146 model components to file: J2218-0335_X_map.mod wobs J2218-0335_X_uvs.fits ! Writing UV FITS file: J2218-0335_X_uvs.fits wwins J2218-0335_X_map.win ! wwins: Wrote 7 windows to J2218-0335_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000961357 Jy ! Component: 100 - total flux cleaned = 0.00123748 Jy ! Component: 150 - total flux cleaned = 0.00132763 Jy ! Component: 200 - total flux cleaned = 0.00165666 Jy ! Component: 250 - total flux cleaned = 0.00165918 Jy ! Component: 300 - total flux cleaned = 0.00173552 Jy ! Component: 350 - total flux cleaned = 0.00195552 Jy ! Component: 400 - total flux cleaned = 0.00216976 Jy ! Component: 450 - total flux cleaned = 0.00237767 Jy ! Component: 500 - total flux cleaned = 0.00271213 Jy ! Component: 550 - total flux cleaned = 0.00290823 Jy ! Component: 600 - total flux cleaned = 0.00316586 Jy ! Component: 650 - total flux cleaned = 0.00348063 Jy ! Component: 700 - total flux cleaned = 0.00391015 Jy ! Component: 750 - total flux cleaned = 0.00426836 Jy ! Component: 800 - total flux cleaned = 0.00432648 Jy ! Component: 850 - total flux cleaned = 0.00450031 Jy ! Component: 900 - total flux cleaned = 0.00478161 Jy ! Component: 950 - total flux cleaned = 0.00494668 Jy ! Component: 1000 - total flux cleaned = 0.00500214 Jy ! Component: 1050 - total flux cleaned = 0.00537282 Jy ! Component: 1100 - total flux cleaned = 0.00547673 Jy ! Component: 1150 - total flux cleaned = 0.00552863 Jy ! Component: 1200 - total flux cleaned = 0.00583019 Jy ! Component: 1250 - total flux cleaned = 0.00592841 Jy ! Component: 1300 - total flux cleaned = 0.00607491 Jy ! Component: 1350 - total flux cleaned = 0.00636064 Jy ! Component: 1400 - total flux cleaned = 0.00654799 Jy ! Component: 1450 - total flux cleaned = 0.00650194 Jy ! Component: 1500 - total flux cleaned = 0.00663967 Jy ! Component: 1550 - total flux cleaned = 0.00691022 Jy ! Component: 1600 - total flux cleaned = 0.00699903 Jy ! Component: 1650 - total flux cleaned = 0.00712992 Jy ! Component: 1700 - total flux cleaned = 0.00717322 Jy ! Component: 1750 - total flux cleaned = 0.00730072 Jy ! Component: 1800 - total flux cleaned = 0.00750989 Jy ! Component: 1850 - total flux cleaned = 0.00759228 Jy ! Component: 1900 - total flux cleaned = 0.00775523 Jy ! Component: 1950 - total flux cleaned = 0.00783508 Jy ! Component: 2000 - total flux cleaned = 0.00779497 Jy ! Component: 2050 - total flux cleaned = 0.00779496 Jy ! Component: 2100 - total flux cleaned = 0.00775647 Jy ! Component: 2150 - total flux cleaned = 0.00783337 Jy ! Component: 2200 - total flux cleaned = 0.00790942 Jy ! Component: 2250 - total flux cleaned = 0.00794629 Jy ! Component: 2300 - total flux cleaned = 0.00798264 Jy ! Component: 2350 - total flux cleaned = 0.00801844 Jy ! Component: 2400 - total flux cleaned = 0.00809038 Jy ! Component: 2450 - total flux cleaned = 0.00819651 Jy ! Component: 2500 - total flux cleaned = 0.00826642 Jy ! Component: 2550 - total flux cleaned = 0.0082663 Jy ! Component: 2600 - total flux cleaned = 0.00847298 Jy ! Component: 2650 - total flux cleaned = 0.00850717 Jy ! Component: 2700 - total flux cleaned = 0.008775 Jy ! Component: 2750 - total flux cleaned = 0.00874103 Jy ! Component: 2800 - total flux cleaned = 0.00877392 Jy ! Component: 2850 - total flux cleaned = 0.00890391 Jy ! Component: 2900 - total flux cleaned = 0.00900005 Jy ! Component: 2950 - total flux cleaned = 0.00903152 Jy ! Component: 3000 - total flux cleaned = 0.00912589 Jy ! Component: 3050 - total flux cleaned = 0.00921922 Jy ! Component: 3100 - total flux cleaned = 0.00921914 Jy ! Component: 3150 - total flux cleaned = 0.00931066 Jy ! Component: 3200 - total flux cleaned = 0.00934059 Jy ! Component: 3250 - total flux cleaned = 0.00934093 Jy ! Component: 3300 - total flux cleaned = 0.00945851 Jy ! Component: 3350 - total flux cleaned = 0.00951688 Jy ! Component: 3400 - total flux cleaned = 0.00954584 Jy ! Component: 3450 - total flux cleaned = 0.00957476 Jy ! Component: 3500 - total flux cleaned = 0.00960361 Jy ! Component: 3550 - total flux cleaned = 0.00974429 Jy ! Component: 3600 - total flux cleaned = 0.0097721 Jy ! Component: 3650 - total flux cleaned = 0.00979963 Jy ! Component: 3700 - total flux cleaned = 0.00988149 Jy ! Component: 3750 - total flux cleaned = 0.00990841 Jy ! Component: 3800 - total flux cleaned = 0.00990888 Jy ! Component: 3850 - total flux cleaned = 0.00998887 Jy ! Component: 3900 - total flux cleaned = 0.0100678 Jy ! Component: 3950 - total flux cleaned = 0.010068 Jy ! Component: 4000 - total flux cleaned = 0.0101455 Jy ! Component: 4050 - total flux cleaned = 0.0102223 Jy ! Total flux subtracted in 4096 components = 0.0102728 Jy ! Clean residual min=-0.001321 max=0.001307 Jy/beam ! Clean residual mean=-0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 1.74605 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 409 components and 1.74605 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2218-0335_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8116 x 1.919 at -1.883 degrees (North through East) ! Clean map min=-0.0134 max=1.0248 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2218-0335_X_map.fits wmodel /image_prod/ug002_uva//J2218-0335_X_map.mod ! Writing 409 model components to file: /image_prod/ug002_uva//J2218-0335_X_map.mod wobs /image_prod/ug002_uva//J2218-0335_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2218-0335_X_uvs.fits wwins /image_prod/ug002_uva//J2218-0335_X_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J2218-0335_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.02478 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000406212 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.118916 0.118916 0.237833 0.475665 0.95133 1.90266 3.80532 7.61064 15.2213 30.4426 60.8852 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.024 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2522.78 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2218-0335_X_dfm.log closed on Thu Mar 5 05:36:50 2020