! Started logfile: /image_prod/ug002_uva//J2214-3835_X_dfm.log on Thu Mar  5 05:35:32 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J2214-3835_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2214-3835_X_uva.fits
! AN table 1: 75 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.824 visibilities/baseline/integration-bin.
! Found source: J2214-3835
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 11124 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2214-3835_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011423Jy  sigma=7.459566
! Fit after  self-cal, rms=0.906889Jy  sigma=6.633132
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7073 mas, bmaj=7.844 mas, bpa=-22.6 degrees
! Estimated noise=1.95607 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0630177 Jy
! Component: 100  -  total flux cleaned = 0.0990049 Jy
! Total flux subtracted in 100 components = 0.0990049 Jy
! Clean residual min=-0.018509 max=0.020969 Jy/beam
! Clean residual mean=0.000286 rms=0.007317 Jy/beam
! Combined flux in latest and established models = 0.0990049 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 55 components and 0.0990049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110120Jy  sigma=0.826467
! Fit after  self-cal, rms=0.109156Jy  sigma=0.819654
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=8.124 mas, bpa=-21.54 degrees
! Estimated noise=0.924227 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0501876 Jy
! Component: 100  -  total flux cleaned = 0.0866112 Jy
! Component: 150  -  total flux cleaned = 0.104063 Jy
! Component: 200  -  total flux cleaned = 0.119344 Jy
! Total flux subtracted in 200 components = 0.119344 Jy
! Clean residual min=-0.014202 max=0.014266 Jy/beam
! Clean residual mean=0.000109 rms=0.006032 Jy/beam
! Combined flux in latest and established models = 0.218349 Jy
! Performing phase self-cal
! Adding 121 model components to the UV plane model.
! The established model now contains 162 components and 0.218349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073330Jy  sigma=0.529543
! Fit after  self-cal, rms=0.072451Jy  sigma=0.523065
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.012 x 8.124 at -21.54 degrees (North through East)
! Clean map  min=-0.016979  max=0.08064 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.87     KP        1.04     LA        0.79     MK        1.35     
!   NL        1.30     OV        0.90     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.87     KP        1.01     LA        0.80     MK        0.97     
!   NL        1.24     OV        0.89     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     KP        1.07     LA        0.77     MK        1.11     
!   NL        1.25     OV        0.89     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.85     KP        1.01     LA        0.81     MK        1.07     
!   NL        1.27     OV        0.90     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.86     KP        1.03     LA        0.82     MK        1.08     
!   NL        1.27     OV        0.90     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     KP        0.99     LA        0.78     MK        1.02     
!   NL        1.24     OV        0.91     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.84     KP        0.98     LA        0.83     MK        1.10     
!   NL        1.30     OV        0.92     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.86     KP        1.00     LA        0.81     MK        0.99     
!   NL        1.27     OV        0.87     
! 
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.87     KP        0.99     LA        0.81     MK        1.03     
!   NL        1.31     OV        0.89     
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.84     KP        1.00     LA        0.84     MK        1.15     
!   NL        1.24     OV        0.85     
! 
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.86     KP        0.96     LA        0.84     MK        1.09     
!   NL        1.17     OV        0.88     
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     KP        0.97     LA        0.83     MK        0.81     
!   NL        1.23     OV        0.86     
! 
! 
! Fit before self-cal, rms=0.072451Jy  sigma=0.523065
! Fit after  self-cal, rms=0.063596Jy  sigma=0.453881
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.071 mas, bmaj=8.237 mas, bpa=-21.67 degrees
! Estimated noise=0.826566 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140936 Jy
! Component: 100  -  total flux cleaned = 0.0206343 Jy
! Component: 150  -  total flux cleaned = 0.0222927 Jy
! Component: 200  -  total flux cleaned = 0.0235925 Jy
! Total flux subtracted in 200 components = 0.0235925 Jy
! Clean residual min=-0.002507 max=0.002500 Jy/beam
! Clean residual mean=0.000016 rms=0.001018 Jy/beam
! Combined flux in latest and established models = 0.241941 Jy
! Performing phase self-cal
! Adding 94 model components to the UV plane model.
! The established model now contains 253 components and 0.241941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060819Jy  sigma=0.416903
! Fit after  self-cal, rms=0.060788Jy  sigma=0.415143
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060788Jy  sigma=0.415143
! Fit after  self-cal, rms=0.060755Jy  sigma=0.414362
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=8.202 mas, bpa=-21.75 degrees
! Estimated noise=0.818347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228496 Jy
! Component: 100  -  total flux cleaned = 0.00316825 Jy
! Component: 150  -  total flux cleaned = 0.00354465 Jy
! Component: 200  -  total flux cleaned = 0.00354703 Jy
! Total flux subtracted in 200 components = 0.00354703 Jy
! Clean residual min=-0.001342 max=0.001341 Jy/beam
! Clean residual mean=-0.000001 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.245488 Jy
selfcal
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 313 components and 0.245488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060376Jy  sigma=0.410212
! Fit after  self-cal, rms=0.060370Jy  sigma=0.409925
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000891915 Jy
! Component: 100  -  total flux cleaned = 0.00142834 Jy
! Component: 150  -  total flux cleaned = 0.00163705 Jy
! Component: 200  -  total flux cleaned = 0.00163483 Jy
! Total flux subtracted in 200 components = 0.00163483 Jy
! Clean residual min=-0.001010 max=0.001005 Jy/beam
! Clean residual mean=0.000001 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.247123 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 356 components and 0.247123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060185Jy  sigma=0.408380
! Fit after  self-cal, rms=0.060178Jy  sigma=0.408274
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060178Jy  sigma=0.408274
! Fit after  self-cal, rms=0.059639Jy  sigma=0.407371
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=8.215 mas, bpa=-21.79 degrees
! Estimated noise=0.81453 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000666468 Jy
! Component: 100  -  total flux cleaned = 0.00116848 Jy
! Component: 150  -  total flux cleaned = 0.0014755 Jy
! Component: 200  -  total flux cleaned = 0.00194854 Jy
! Total flux subtracted in 200 components = 0.00194854 Jy
! Clean residual min=-0.000757 max=0.000758 Jy/beam
! Clean residual mean=-0.000000 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.249072 Jy
selfcal
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 402 components and 0.249072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059532Jy  sigma=0.406609
! Fit after  self-cal, rms=0.059545Jy  sigma=0.406529
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000377779 Jy
! Component: 100  -  total flux cleaned = 0.000329761 Jy
! Component: 150  -  total flux cleaned = 0.000372598 Jy
! Component: 200  -  total flux cleaned = 0.000329353 Jy
! Total flux subtracted in 200 components = 0.000329353 Jy
! Clean residual min=-0.000654 max=0.000656 Jy/beam
! Clean residual mean=0.000000 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.249401 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 422 components and 0.249401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059468Jy  sigma=0.406030
! Fit after  self-cal, rms=0.059468Jy  sigma=0.405992
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059468Jy  sigma=0.405992
! Fit after  self-cal, rms=0.058853Jy  sigma=0.405944
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.579 mas, bmaj=12.47 mas, bpa=-10.67 degrees
! Estimated noise=0.885517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000712452 Jy
! Component: 100  -  total flux cleaned = 0.000898938 Jy
! Component: 150  -  total flux cleaned = 0.000965857 Jy
! Component: 200  -  total flux cleaned = 0.000998803 Jy
! Total flux subtracted in 200 components = 0.000998803 Jy
! Clean residual min=-0.000499 max=0.000497 Jy/beam
! Clean residual mean=-0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.2504 Jy
selfcal
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 476 components and 0.2504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058812Jy  sigma=0.405647
! Fit after  self-cal, rms=0.058800Jy  sigma=0.405623
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000345682 Jy
! Component: 100  -  total flux cleaned = 0.000257646 Jy
! Component: 150  -  total flux cleaned = 0.00020372 Jy
! Component: 200  -  total flux cleaned = 0.000178937 Jy
! Total flux subtracted in 200 components = 0.000178937 Jy
! Clean residual min=-0.000427 max=0.000429 Jy/beam
! Clean residual mean=-0.000001 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.250579 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 522 components and 0.250579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058771Jy  sigma=0.405433
! Fit after  self-cal, rms=0.058763Jy  sigma=0.405420
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=8.225 mas, bpa=-21.82 degrees
! Estimated noise=0.809847 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.052 x 8.225 at -21.82 degrees (North through East)
! Clean map  min=-0.0027981  max=0.068504 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7217 mas, bmaj=8.042 mas, bpa=-22.91 degrees
! Estimated noise=1.77314 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0552818 Jy
! Component: 100  -  total flux cleaned = 0.0878195 Jy
! Component: 150  -  total flux cleaned = 0.11312 Jy
! Component: 200  -  total flux cleaned = 0.131112 Jy
! Total flux subtracted in 200 components = 0.131112 Jy
! Clean residual min=-0.012393 max=0.012426 Jy/beam
! Clean residual mean=0.000179 rms=0.004676 Jy/beam
! Combined flux in latest and established models = 0.131112 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 84 model components to the UV plane model.
! The established model now contains 84 components and 0.131112 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=8.225 mas, bpa=-21.82 degrees
! Estimated noise=0.809847 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.029351 Jy
! Component: 100  -  total flux cleaned = 0.0481938 Jy
! Component: 150  -  total flux cleaned = 0.0627509 Jy
! Component: 200  -  total flux cleaned = 0.0726976 Jy
! Total flux subtracted in 200 components = 0.0726976 Jy
! Clean residual min=-0.008181 max=0.008193 Jy/beam
! Clean residual mean=0.000085 rms=0.003287 Jy/beam
! Combined flux in latest and established models = 0.20381 Jy
! Adding 106 model components to the UV plane model.
! The established model now contains 181 components and 0.20381 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.579 mas, bmaj=12.47 mas, bpa=-10.67 degrees
! Estimated noise=0.885517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137793 Jy
! Component: 100  -  total flux cleaned = 0.0187543 Jy
! Component: 150  -  total flux cleaned = 0.0204115 Jy
! Component: 200  -  total flux cleaned = 0.0204217 Jy
! Total flux subtracted in 200 components = 0.0204217 Jy
! Clean residual min=-0.003426 max=0.003463 Jy/beam
! Clean residual mean=0.000032 rms=0.001457 Jy/beam
! Combined flux in latest and established models = 0.224231 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153561 Jy
! Component: 100  -  total flux cleaned = 0.00150926 Jy
! Component: 150  -  total flux cleaned = 0.00208201 Jy
! Component: 200  -  total flux cleaned = 0.00246516 Jy
! Total flux subtracted in 200 components = 0.00246516 Jy
! Clean residual min=-0.001526 max=0.001521 Jy/beam
! Clean residual mean=0.000007 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.226696 Jy
! Adding 197 model components to the UV plane model.
! The established model now contains 354 components and 0.226696 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=8.225 mas, bpa=-21.82 degrees
! Estimated noise=0.809847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000302248 Jy
! Component: 100  -  total flux cleaned = 0.000880957 Jy
! Component: 150  -  total flux cleaned = 0.00103078 Jy
! Component: 200  -  total flux cleaned = 0.00129222 Jy
! Total flux subtracted in 200 components = 0.00129222 Jy
! Clean residual min=-0.001001 max=0.001006 Jy/beam
! Clean residual mean=0.000003 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.227989 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 402 components and 0.227989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058894Jy  sigma=0.406404
! Fit after  self-cal, rms=0.058776Jy  sigma=0.405640
wmodel J2214-3835_X_map.mod
! Writing 402 model components to file: J2214-3835_X_map.mod
wobs   J2214-3835_X_uvs.fits
! Writing UV FITS file: J2214-3835_X_uvs.fits
wwins  J2214-3835_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /image_prod/ug002_uva//J2214-3835_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.052 x 8.225 at -21.82 degrees (North through East)
! Clean map  min=-0.0033195  max=0.064517 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2214-3835_X_map.fits
wmodel /image_prod/ug002_uva//J2214-3835_X_map.mod
! Writing 402 model components to file: /image_prod/ug002_uva//J2214-3835_X_map.mod
wobs   /image_prod/ug002_uva//J2214-3835_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2214-3835_X_uvs.fits
wwins  /image_prod/ug002_uva//J2214-3835_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0645175 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000319198 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.48424 1.48424 2.96848 5.93697 11.8739 23.7479 47.4957 94.9914
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.064 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  202.123 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2214-3835_X_dfm.log closed on Thu Mar  5 05:35:36 2020