! Started logfile: /image_prod/ug002_uva//J2214-2521_X_dfm.log on Thu Mar 5 05:35:21 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2214-2521_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2214-2521_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994815 visibilities/baseline/integration-bin. ! Found source: J2214-2521 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 32232 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2214-2521_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.003815Jy sigma=8.086246 ! Fit after self-cal, rms=0.940204Jy sigma=7.520914 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6059 mas, bmaj=1.628 mas, bpa=-2.52 degrees ! Estimated noise=1.02911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405264 Jy ! Component: 100 - total flux cleaned = 0.0572436 Jy ! Total flux subtracted in 100 components = 0.0572436 Jy ! Clean residual min=-0.004801 max=0.010264 Jy/beam ! Clean residual mean=-0.000016 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.0572436 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0572436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075852Jy sigma=0.558342 ! Fit after self-cal, rms=0.075061Jy sigma=0.553305 ! Inverting map ! Added new window around map position (-0.6, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117298 Jy ! Component: 100 - total flux cleaned = 0.0192697 Jy ! Total flux subtracted in 100 components = 0.0192697 Jy ! Clean residual min=-0.004104 max=0.007401 Jy/beam ! Clean residual mean=-0.000010 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.0765133 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.0765133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071965Jy sigma=0.517248 ! Fit after self-cal, rms=0.071864Jy sigma=0.516674 ! Inverting map ! Added new window around map position (0.8, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702754 Jy ! Component: 100 - total flux cleaned = 0.0116024 Jy ! Total flux subtracted in 100 components = 0.0116024 Jy ! Clean residual min=-0.003612 max=0.005953 Jy/beam ! Clean residual mean=-0.000007 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.0881157 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 0.0881158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070813Jy sigma=0.504076 ! Fit after self-cal, rms=0.070800Jy sigma=0.503877 ! Inverting map ! Added new window around map position (6.6, 17.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581343 Jy ! Component: 100 - total flux cleaned = 0.00967046 Jy ! Total flux subtracted in 100 components = 0.00967046 Jy ! Clean residual min=-0.003264 max=0.003360 Jy/beam ! Clean residual mean=-0.000007 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.0977862 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.0977862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070148Jy sigma=0.496705 ! Fit after self-cal, rms=0.070085Jy sigma=0.496355 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8055 mas, bmaj=2.066 mas, bpa=-2.622 degrees ! Estimated noise=0.504964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615863 Jy ! Component: 100 - total flux cleaned = 0.0104572 Jy ! Component: 150 - total flux cleaned = 0.0136965 Jy ! Component: 200 - total flux cleaned = 0.0161715 Jy ! Total flux subtracted in 200 components = 0.0161715 Jy ! Clean residual min=-0.002929 max=0.003652 Jy/beam ! Clean residual mean=-0.000010 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.113958 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 73 components and 0.113958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069501Jy sigma=0.489140 ! Fit after self-cal, rms=0.069394Jy sigma=0.488745 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8055 x 2.066 at -2.622 degrees (North through East) ! Clean map min=-0.0029368 max=0.058849 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.09 KP 0.95 ! LA 1.00 MK 1.01 NL 1.18 OV 0.89 ! PT 0.88 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.14 KP 0.97 ! LA 0.99 MK 1.03 NL 1.19 OV 0.87 ! PT 0.92 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.03 KP 0.97 ! LA 1.02 MK 1.06 NL 1.16 OV 0.92 ! PT 0.87 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.02 KP 1.00 ! LA 0.99 MK 1.05 NL 1.22 OV 0.87 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.94 KP 1.00 ! LA 1.00 MK 1.03 NL 1.16 OV 0.89 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.00 KP 1.02 ! LA 1.00 MK 1.00 NL 1.12 OV 0.89 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.08 KP 0.99 ! LA 1.01 MK 1.06 NL 1.17 OV 0.88 ! PT 0.91 SC 0.93 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 1.01 KP 1.02 ! LA 1.01 MK 1.02 NL 1.14 OV 0.89 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 1.02 KP 1.00 ! LA 1.00 MK 1.00 NL 1.16 OV 0.90 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.03 KP 1.03 ! LA 0.99 MK 1.07 NL 1.20 OV 0.93 ! PT 0.89 SC 0.87 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.93 KP 0.98 ! LA 1.05 MK 0.98 NL 1.17 OV 0.91 ! PT 0.91 SC 0.86 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.01 KP 1.01 ! LA 0.97 MK 0.95 NL 1.19 OV 0.86 ! PT 0.93 SC 0.78 ! ! ! Fit before self-cal, rms=0.069394Jy sigma=0.488745 ! Fit after self-cal, rms=0.067122Jy sigma=0.484033 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8075 mas, bmaj=2.06 mas, bpa=-1.482 degrees ! Estimated noise=0.490744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233511 Jy ! Component: 100 - total flux cleaned = 0.00273114 Jy ! Component: 150 - total flux cleaned = 0.0029309 Jy ! Component: 200 - total flux cleaned = 0.00306641 Jy ! Total flux subtracted in 200 components = 0.00306641 Jy ! Clean residual min=-0.002103 max=0.002526 Jy/beam ! Clean residual mean=-0.000003 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.117024 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.117024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067035Jy sigma=0.483090 ! Fit after self-cal, rms=0.067096Jy sigma=0.482809 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067096Jy sigma=0.482809 ! Fit after self-cal, rms=0.068034Jy sigma=0.480604 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8077 mas, bmaj=2.054 mas, bpa=-1.033 degrees ! Estimated noise=0.491077 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899175 Jy ! Component: 100 - total flux cleaned = 0.00100512 Jy ! Component: 150 - total flux cleaned = 0.00106509 Jy ! Component: 200 - total flux cleaned = 0.00111873 Jy ! Total flux subtracted in 200 components = 0.00111873 Jy ! Clean residual min=-0.001653 max=0.002630 Jy/beam ! Clean residual mean=-0.000001 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.118143 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 0.118143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068004Jy sigma=0.480242 ! Fit after self-cal, rms=0.068048Jy sigma=0.480152 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228182 Jy ! Component: 100 - total flux cleaned = 0.00343206 Jy ! Component: 150 - total flux cleaned = 0.00396375 Jy ! Component: 200 - total flux cleaned = 0.00418376 Jy ! Total flux subtracted in 200 components = 0.00418376 Jy ! Clean residual min=-0.001353 max=0.001411 Jy/beam ! Clean residual mean=-0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.122327 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.122327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067968Jy sigma=0.479368 ! Fit after self-cal, rms=0.067959Jy sigma=0.479229 ! Inverting map ! Added new window around map position (-3.2, 15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120007 Jy ! Component: 100 - total flux cleaned = 0.00146586 Jy ! Component: 150 - total flux cleaned = 0.00168509 Jy ! Component: 200 - total flux cleaned = 0.00168515 Jy ! Total flux subtracted in 200 components = 0.00168515 Jy ! Clean residual min=-0.001307 max=0.001487 Jy/beam ! Clean residual mean=-0.000001 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.124012 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.124012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067916Jy sigma=0.478853 ! Fit after self-cal, rms=0.067904Jy sigma=0.478778 ! Inverting map ! Added new window around map position (14.6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110977 Jy ! Component: 100 - total flux cleaned = 0.00144874 Jy ! Component: 150 - total flux cleaned = 0.0015789 Jy ! Component: 200 - total flux cleaned = 0.00157851 Jy ! Total flux subtracted in 200 components = 0.00157851 Jy ! Clean residual min=-0.001236 max=0.001377 Jy/beam ! Clean residual mean=-0.000002 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.12559 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 124 components and 0.12559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067854Jy sigma=0.478472 ! Fit after self-cal, rms=0.067843Jy sigma=0.478397 ! Inverting map ! Added new window around map position (11, 25.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000984395 Jy ! Component: 100 - total flux cleaned = 0.00127103 Jy ! Component: 150 - total flux cleaned = 0.00143072 Jy ! Component: 200 - total flux cleaned = 0.00148824 Jy ! Total flux subtracted in 200 components = 0.00148824 Jy ! Clean residual min=-0.001247 max=0.001285 Jy/beam ! Clean residual mean=-0.000002 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.127079 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 136 components and 0.127079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067798Jy sigma=0.478122 ! Fit after self-cal, rms=0.067806Jy sigma=0.478071 ! Inverting map ! Added new window around map position (-0.8, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108923 Jy ! Component: 100 - total flux cleaned = 0.0012883 Jy ! Component: 150 - total flux cleaned = 0.00137761 Jy ! Component: 200 - total flux cleaned = 0.00143396 Jy ! Total flux subtracted in 200 components = 0.00143396 Jy ! Clean residual min=-0.001193 max=0.001196 Jy/beam ! Clean residual mean=-0.000002 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.128513 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 147 components and 0.128513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067764Jy sigma=0.477820 ! Fit after self-cal, rms=0.067769Jy sigma=0.477779 ! Inverting map ! Added new window around map position (3.2, 17.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105145 Jy ! Component: 100 - total flux cleaned = 0.0013794 Jy ! Component: 150 - total flux cleaned = 0.0015576 Jy ! Component: 200 - total flux cleaned = 0.00166792 Jy ! Total flux subtracted in 200 components = 0.00166792 Jy ! Clean residual min=-0.001128 max=0.001159 Jy/beam ! Clean residual mean=-0.000002 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.13018 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 159 components and 0.13018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067734Jy sigma=0.477523 ! Fit after self-cal, rms=0.067739Jy sigma=0.477493 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067739Jy sigma=0.477493 ! Fit after self-cal, rms=0.067507Jy sigma=0.477128 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8008 mas, bmaj=2.026 mas, bpa=-0.1499 degrees ! Estimated noise=0.485717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192235 Jy ! Component: 100 - total flux cleaned = 0.000365936 Jy ! Component: 150 - total flux cleaned = 0.000443203 Jy ! Component: 200 - total flux cleaned = 0.000467533 Jy ! Total flux subtracted in 200 components = 0.000467533 Jy ! Clean residual min=-0.000999 max=0.001011 Jy/beam ! Clean residual mean=-0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.130648 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 171 components and 0.130648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067483Jy sigma=0.476951 ! Fit after self-cal, rms=0.067519Jy sigma=0.476910 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118012 Jy ! Component: 100 - total flux cleaned = 0.000143498 Jy ! Component: 150 - total flux cleaned = 0.000190152 Jy ! Component: 200 - total flux cleaned = 0.000213279 Jy ! Total flux subtracted in 200 components = 0.000213279 Jy ! Clean residual min=-0.001008 max=0.001006 Jy/beam ! Clean residual mean=-0.000001 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.130861 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 180 components and 0.130861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067501Jy sigma=0.476781 ! Fit after self-cal, rms=0.067509Jy sigma=0.476769 ! Inverting map ! Added new window around map position (-22.6, 31.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000920491 Jy ! Component: 100 - total flux cleaned = 0.00119412 Jy ! Component: 150 - total flux cleaned = 0.00126308 Jy ! Component: 200 - total flux cleaned = 0.00137258 Jy ! Total flux subtracted in 200 components = 0.00137258 Jy ! Clean residual min=-0.000978 max=0.000975 Jy/beam ! Clean residual mean=-0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.132234 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 190 components and 0.132234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067487Jy sigma=0.476600 ! Fit after self-cal, rms=0.067493Jy sigma=0.476581 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067493Jy sigma=0.476581 ! Fit after self-cal, rms=0.067041Jy sigma=0.476549 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.246 mas, bmaj=5.323 mas, bpa=4.389 degrees ! Estimated noise=0.616438 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247264 Jy ! Component: 100 - total flux cleaned = 0.000389427 Jy ! Component: 150 - total flux cleaned = 0.000515632 Jy ! Component: 200 - total flux cleaned = 0.000592849 Jy ! Total flux subtracted in 200 components = 0.000592849 Jy ! Clean residual min=-0.000951 max=0.000841 Jy/beam ! Clean residual mean=-0.000002 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.132827 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 209 components and 0.132827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067035Jy sigma=0.476527 ! Fit after self-cal, rms=0.067044Jy sigma=0.476520 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.70494e-05 Jy ! Component: 100 - total flux cleaned = 0.000148871 Jy ! Component: 150 - total flux cleaned = 0.000193622 Jy ! Component: 200 - total flux cleaned = 0.000246503 Jy ! Total flux subtracted in 200 components = 0.000246503 Jy ! Clean residual min=-0.000943 max=0.000838 Jy/beam ! Clean residual mean=-0.000002 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.133073 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 219 components and 0.133073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067040Jy sigma=0.476511 ! Fit after self-cal, rms=0.067041Jy sigma=0.476509 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7972 mas, bmaj=2.013 mas, bpa=0.1917 degrees ! Estimated noise=0.481917 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7972 x 2.013 at 0.1917 degrees (North through East) ! Clean map min=-0.001727 max=0.055666 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6013 mas, bmaj=1.597 mas, bpa=0.3723 degrees ! Estimated noise=0.964235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385128 Jy ! Component: 100 - total flux cleaned = 0.0564027 Jy ! Component: 150 - total flux cleaned = 0.0684736 Jy ! Component: 200 - total flux cleaned = 0.077459 Jy ! Total flux subtracted in 200 components = 0.077459 Jy ! Clean residual min=-0.004875 max=0.005350 Jy/beam ! Clean residual mean=-0.000008 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.077459 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.077459 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7972 mas, bmaj=2.013 mas, bpa=0.1917 degrees ! Estimated noise=0.481917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117584 Jy ! Component: 100 - total flux cleaned = 0.0193065 Jy ! Component: 150 - total flux cleaned = 0.0248283 Jy ! Component: 200 - total flux cleaned = 0.0290923 Jy ! Total flux subtracted in 200 components = 0.0290923 Jy ! Clean residual min=-0.002402 max=0.002919 Jy/beam ! Clean residual mean=-0.000005 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.106551 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 61 components and 0.106551 Jy ! Inverting map ! Added new window around map position (1.6, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360446 Jy ! Component: 100 - total flux cleaned = 0.00663062 Jy ! Component: 150 - total flux cleaned = 0.00922731 Jy ! Component: 200 - total flux cleaned = 0.0114932 Jy ! Total flux subtracted in 200 components = 0.0114932 Jy ! Clean residual min=-0.001724 max=0.001803 Jy/beam ! Clean residual mean=-0.000003 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.118045 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 80 components and 0.118045 Jy ! Inverting map ! Added new window around map position (6.6, -11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183908 Jy ! Component: 100 - total flux cleaned = 0.00321618 Jy ! Component: 150 - total flux cleaned = 0.00440546 Jy ! Component: 200 - total flux cleaned = 0.00531807 Jy ! Total flux subtracted in 200 components = 0.00531807 Jy ! Clean residual min=-0.001517 max=0.001544 Jy/beam ! Clean residual mean=-0.000002 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.123363 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 100 components and 0.123363 Jy ! Inverting map ! Added new window around map position (38.6, 40.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111558 Jy ! Component: 100 - total flux cleaned = 0.00164899 Jy ! Component: 150 - total flux cleaned = 0.00225136 Jy ! Component: 200 - total flux cleaned = 0.00272785 Jy ! Total flux subtracted in 200 components = 0.00272785 Jy ! Clean residual min=-0.001297 max=0.001272 Jy/beam ! Clean residual mean=-0.000002 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.12609 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 117 components and 0.12609 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.246 mas, bmaj=5.323 mas, bpa=4.389 degrees ! Estimated noise=0.616438 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158153 Jy ! Component: 100 - total flux cleaned = 0.00266461 Jy ! Component: 150 - total flux cleaned = 0.00342082 Jy ! Component: 200 - total flux cleaned = 0.00404577 Jy ! Total flux subtracted in 200 components = 0.00404577 Jy ! Clean residual min=-0.001148 max=0.001093 Jy/beam ! Clean residual mean=-0.000002 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.130136 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476405 Jy ! Component: 100 - total flux cleaned = 0.000759158 Jy ! Component: 150 - total flux cleaned = 0.00104546 Jy ! Component: 200 - total flux cleaned = 0.00133367 Jy ! Total flux subtracted in 200 components = 0.00133367 Jy ! Clean residual min=-0.001069 max=0.000990 Jy/beam ! Clean residual mean=-0.000002 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.13147 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 175 components and 0.13147 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7972 mas, bmaj=2.013 mas, bpa=0.1917 degrees ! Estimated noise=0.481917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.23191e-05 Jy ! Component: 100 - total flux cleaned = 8.69203e-05 Jy ! Component: 150 - total flux cleaned = 0.000306846 Jy ! Component: 200 - total flux cleaned = 0.000443583 Jy ! Total flux subtracted in 200 components = 0.000443583 Jy ! Clean residual min=-0.001009 max=0.001123 Jy/beam ! Clean residual mean=-0.000001 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.131913 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 194 components and 0.131913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067069Jy sigma=0.476892 ! Fit after self-cal, rms=0.067034Jy sigma=0.476712 wmodel J2214-2521_X_map.mod ! Writing 194 model components to file: J2214-2521_X_map.mod wobs J2214-2521_X_uvs.fits ! Writing UV FITS file: J2214-2521_X_uvs.fits wwins J2214-2521_X_map.win ! wwins: Wrote 14 windows to J2214-2521_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157181 Jy ! Component: 100 - total flux cleaned = -0.000192431 Jy ! Component: 150 - total flux cleaned = -0.000243011 Jy ! Component: 200 - total flux cleaned = -0.000275377 Jy ! Component: 250 - total flux cleaned = -0.000259776 Jy ! Component: 300 - total flux cleaned = -0.000259788 Jy ! Component: 350 - total flux cleaned = -0.000289666 Jy ! Component: 400 - total flux cleaned = -0.00030427 Jy ! Component: 450 - total flux cleaned = -0.000318358 Jy ! Component: 500 - total flux cleaned = -0.000318248 Jy ! Component: 550 - total flux cleaned = -0.000332061 Jy ! Component: 600 - total flux cleaned = -0.000291023 Jy ! Component: 650 - total flux cleaned = -0.000304681 Jy ! Component: 700 - total flux cleaned = -0.000317727 Jy ! Component: 750 - total flux cleaned = -0.000291755 Jy ! Component: 800 - total flux cleaned = -0.000317434 Jy ! Component: 850 - total flux cleaned = -0.000304711 Jy ! Component: 900 - total flux cleaned = -0.000292462 Jy ! Component: 950 - total flux cleaned = -0.000317337 Jy ! Component: 1000 - total flux cleaned = -0.000317423 Jy ! Component: 1050 - total flux cleaned = -0.000329702 Jy ! Component: 1100 - total flux cleaned = -0.000401466 Jy ! Component: 1150 - total flux cleaned = -0.000436891 Jy ! Component: 1200 - total flux cleaned = -0.000460294 Jy ! Component: 1250 - total flux cleaned = -0.000518253 Jy ! Component: 1300 - total flux cleaned = -0.000518194 Jy ! Component: 1350 - total flux cleaned = -0.000586385 Jy ! Component: 1400 - total flux cleaned = -0.000620081 Jy ! Component: 1450 - total flux cleaned = -0.00067576 Jy ! Component: 1500 - total flux cleaned = -0.000719883 Jy ! Component: 1550 - total flux cleaned = -0.00071971 Jy ! Component: 1600 - total flux cleaned = -0.000752228 Jy ! Component: 1650 - total flux cleaned = -0.000805769 Jy ! Component: 1700 - total flux cleaned = -0.000805768 Jy ! Component: 1750 - total flux cleaned = -0.000868819 Jy ! Component: 1800 - total flux cleaned = -0.000847893 Jy ! Component: 1850 - total flux cleaned = -0.000847864 Jy ! Component: 1900 - total flux cleaned = -0.000899191 Jy ! Component: 1950 - total flux cleaned = -0.00085853 Jy ! Component: 2000 - total flux cleaned = -0.000919089 Jy ! Component: 2050 - total flux cleaned = -0.000928945 Jy ! Component: 2100 - total flux cleaned = -0.000899313 Jy ! Component: 2150 - total flux cleaned = -0.000928807 Jy ! Component: 2200 - total flux cleaned = -0.000899532 Jy ! Component: 2250 - total flux cleaned = -0.000957648 Jy ! Component: 2300 - total flux cleaned = -0.000909608 Jy ! Component: 2350 - total flux cleaned = -0.00090965 Jy ! Component: 2400 - total flux cleaned = -0.000928653 Jy ! Component: 2450 - total flux cleaned = -0.000947458 Jy ! Component: 2500 - total flux cleaned = -0.000956822 Jy ! Component: 2550 - total flux cleaned = -0.000975378 Jy ! Component: 2600 - total flux cleaned = -0.000984619 Jy ! Component: 2650 - total flux cleaned = -0.00101208 Jy ! Component: 2700 - total flux cleaned = -0.00102108 Jy ! Component: 2750 - total flux cleaned = -0.00100308 Jy ! Component: 2800 - total flux cleaned = -0.0010031 Jy ! Component: 2850 - total flux cleaned = -0.00103872 Jy ! Component: 2900 - total flux cleaned = -0.00102981 Jy ! Component: 2950 - total flux cleaned = -0.00105617 Jy ! Component: 3000 - total flux cleaned = -0.00106489 Jy ! Component: 3050 - total flux cleaned = -0.00107359 Jy ! Component: 3100 - total flux cleaned = -0.00108226 Jy ! Component: 3150 - total flux cleaned = -0.00109088 Jy ! Component: 3200 - total flux cleaned = -0.0011165 Jy ! Component: 3250 - total flux cleaned = -0.00115031 Jy ! Component: 3300 - total flux cleaned = -0.00114198 Jy ! Component: 3350 - total flux cleaned = -0.00113357 Jy ! Component: 3400 - total flux cleaned = -0.00116687 Jy ! Component: 3450 - total flux cleaned = -0.00113372 Jy ! Component: 3500 - total flux cleaned = -0.00112544 Jy ! Component: 3550 - total flux cleaned = -0.00109285 Jy ! Component: 3600 - total flux cleaned = -0.00113352 Jy ! Component: 3650 - total flux cleaned = -0.00111729 Jy ! Component: 3700 - total flux cleaned = -0.00112532 Jy ! Component: 3750 - total flux cleaned = -0.00109342 Jy ! Component: 3800 - total flux cleaned = -0.00110929 Jy ! Component: 3850 - total flux cleaned = -0.00108556 Jy ! Component: 3900 - total flux cleaned = -0.00106197 Jy ! Component: 3950 - total flux cleaned = -0.00103848 Jy ! Component: 4000 - total flux cleaned = -0.00103846 Jy ! Component: 4050 - total flux cleaned = -0.000999793 Jy ! Total flux subtracted in 4096 components = -0.000992031 Jy ! Clean residual min=-0.000442 max=0.000665 Jy/beam ! Clean residual mean=-0.000001 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.130921 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 474 components and 0.130921 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2214-2521_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7972 x 2.013 at 0.1917 degrees (North through East) ! Clean map min=-0.0014177 max=0.055125 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2214-2521_X_map.fits wmodel /image_prod/ug002_uva//J2214-2521_X_map.mod ! Writing 474 model components to file: /image_prod/ug002_uva//J2214-2521_X_map.mod wobs /image_prod/ug002_uva//J2214-2521_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2214-2521_X_uvs.fits wwins /image_prod/ug002_uva//J2214-2521_X_map.win ! wwins: Wrote 15 windows to /image_prod/ug002_uva//J2214-2521_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0551248 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000131621 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.716305 0.716305 1.43261 2.86522 5.73044 11.4609 22.9217 45.8435 91.687 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 418.816 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2214-2521_X_dfm.log closed on Thu Mar 5 05:35:27 2020