! Started logfile: /image_prod/ug002_uva//J2214-1257_X_dfm.log on Thu Mar  5 05:35:10 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J2214-1257_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2214-1257_X_uva.fits
! AN table 1: 90 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.685432 visibilities/baseline/integration-bin.
! Found source: J2214-1257
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 33312 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2214-1257_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 210 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004545Jy  sigma=9.225885
! Fit after  self-cal, rms=0.943812Jy  sigma=8.651595
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6476 mas, bmaj=1.676 mas, bpa=-3.41 degrees
! Estimated noise=0.910126 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0388266 Jy
! Component: 100  -  total flux cleaned = 0.0531195 Jy
! Total flux subtracted in 100 components = 0.0531195 Jy
! Clean residual min=-0.004017 max=0.011014 Jy/beam
! Clean residual mean=0.000003 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.0531196 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0531196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059047Jy  sigma=0.510933
! Fit after  self-cal, rms=0.058090Jy  sigma=0.502676
! Inverting map 
! Added new window around map position (-0.8, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117594 Jy
! Component: 100  -  total flux cleaned = 0.0183781 Jy
! Total flux subtracted in 100 components = 0.0183781 Jy
! Clean residual min=-0.003123 max=0.003310 Jy/beam
! Clean residual mean=0.000001 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.0714976 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 12 components and 0.0714976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055166Jy  sigma=0.473001
! Fit after  self-cal, rms=0.054965Jy  sigma=0.471457
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00494261 Jy
! Component: 100  -  total flux cleaned = 0.00656701 Jy
! Total flux subtracted in 100 components = 0.00656701 Jy
! Clean residual min=-0.002374 max=0.002038 Jy/beam
! Clean residual mean=0.000000 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.0780647 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 13 components and 0.0780647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054494Jy  sigma=0.467223
! Fit after  self-cal, rms=0.054453Jy  sigma=0.466979
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8459 mas, bmaj=2.086 mas, bpa=-2.634 degrees
! Estimated noise=0.428309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000956648 Jy
! Component: 100  -  total flux cleaned = 0.000957135 Jy
! Component: 150  -  total flux cleaned = 0.000958888 Jy
! Component: 200  -  total flux cleaned = 0.00100208 Jy
! Total flux subtracted in 200 components = 0.00100208 Jy
! Clean residual min=-0.001988 max=0.001707 Jy/beam
! Clean residual mean=-0.000002 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.0790667 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.0790667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054314Jy  sigma=0.465936
! Fit after  self-cal, rms=0.054292Jy  sigma=0.465854
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8459 x 2.086 at -2.634 degrees (North through East)
! Clean map  min=-0.001913  max=0.058506 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.90     KP        1.03     
!   LA        1.01     MK        1.08     NL        0.96     OV        1.01     
!   PT        1.02     SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.92     KP        1.01     
!   LA        1.02     MK        1.04     NL        0.95     OV        0.99     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.90     KP        0.98     
!   LA        1.01     MK        1.02     NL        0.97     OV        1.05     
!   PT        1.05     SC        0.96     
! 
! 
! Correcting IF 4.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        0.89     KP        1.01     
!   LA        0.98     MK        0.99     NL        0.95     OV        1.03     
!   PT        1.09     SC        0.95     
! 
! 
! Correcting IF 5.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        0.91     KP        1.04     
!   LA        1.00     MK        1.02     NL        0.91     OV        1.01     
!   PT        1.05     SC        1.08     
! 
! 
! Correcting IF 6.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.93     KP        1.04     
!   LA        1.05     MK        1.03     NL        0.96     OV        1.01     
!   PT        1.02     SC        0.87     
! 
! 
! Correcting IF 7.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.96     KP        1.00     
!   LA        1.02     MK        0.96     NL        0.97     OV        1.05     
!   PT        1.07     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.92     KP        1.00     
!   LA        0.99     MK        1.04     NL        0.94     OV        1.04     
!   PT        1.05     SC        0.99     
! 
! 
! Correcting IF 9.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        0.92     KP        1.03     
!   LA        0.97     MK        1.04     NL        0.97     OV        1.01     
!   PT        1.03     SC        0.87     
! 
! 
! Correcting IF 10.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        0.91     KP        1.04     
!   LA        1.03     MK        0.99     NL        1.00     OV        1.04     
!   PT        1.04     SC        0.91     
! 
! 
! Correcting IF 11.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.88     KP        1.01     
!   LA        1.01     MK        0.99     NL        0.92     OV        1.01     
!   PT        1.03     SC        0.94     
! 
! 
! Correcting IF 12.
!  A total of 90 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.98     HN        0.93     KP        1.07     
!   LA        1.03     MK        0.95     NL        0.91     OV        1.01     
!   PT        1.09     SC        0.86     
! 
! 
! Fit before self-cal, rms=0.054292Jy  sigma=0.465854
! Fit after  self-cal, rms=0.052276Jy  sigma=0.464919
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8332 mas, bmaj=2.034 mas, bpa=-2.317 degrees
! Estimated noise=0.428404 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000661022 Jy
! Component: 100  -  total flux cleaned = 0.000663818 Jy
! Component: 150  -  total flux cleaned = 0.000611664 Jy
! Component: 200  -  total flux cleaned = 0.000595284 Jy
! Total flux subtracted in 200 components = 0.000595284 Jy
! Clean residual min=-0.001031 max=0.001032 Jy/beam
! Clean residual mean=-0.000002 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.079662 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 24 components and 0.079662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052245Jy  sigma=0.464670
! Fit after  self-cal, rms=0.052225Jy  sigma=0.464570
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052225Jy  sigma=0.464570
! Fit after  self-cal, rms=0.051775Jy  sigma=0.463431
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8288 mas, bmaj=2.018 mas, bpa=-2.125 degrees
! Estimated noise=0.425446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000380218 Jy
! Component: 100  -  total flux cleaned = 0.00043966 Jy
! Component: 150  -  total flux cleaned = 0.000429086 Jy
! Component: 200  -  total flux cleaned = 0.000428981 Jy
! Total flux subtracted in 200 components = 0.000428981 Jy
! Clean residual min=-0.000820 max=0.000886 Jy/beam
! Clean residual mean=-0.000000 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.080091 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 30 components and 0.080091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051765Jy  sigma=0.463339
! Fit after  self-cal, rms=0.051770Jy  sigma=0.463266
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11, -31.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000761517 Jy
! Component: 100  -  total flux cleaned = 0.00117482 Jy
! Component: 150  -  total flux cleaned = 0.00134279 Jy
! Component: 200  -  total flux cleaned = 0.00145334 Jy
! Total flux subtracted in 200 components = 0.00145334 Jy
! Clean residual min=-0.000771 max=0.000711 Jy/beam
! Clean residual mean=-0.000000 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.0815443 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 45 components and 0.0815443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051758Jy  sigma=0.463148
! Fit after  self-cal, rms=0.051757Jy  sigma=0.463136
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051757Jy  sigma=0.463136
! Fit after  self-cal, rms=0.051524Jy  sigma=0.463113
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.826 mas, bmaj=2.012 mas, bpa=-2.027 degrees
! Estimated noise=0.423689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000238606 Jy
! Component: 100  -  total flux cleaned = 0.000335599 Jy
! Component: 150  -  total flux cleaned = 0.000344629 Jy
! Component: 200  -  total flux cleaned = 0.000361281 Jy
! Total flux subtracted in 200 components = 0.000361281 Jy
! Clean residual min=-0.000747 max=0.000709 Jy/beam
! Clean residual mean=0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0819056 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 50 components and 0.0819056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051520Jy  sigma=0.463077
! Fit after  self-cal, rms=0.051520Jy  sigma=0.463074
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.37358e-05 Jy
! Component: 100  -  total flux cleaned = 8.39038e-05 Jy
! Component: 150  -  total flux cleaned = 7.68075e-05 Jy
! Component: 200  -  total flux cleaned = 8.34261e-05 Jy
! Total flux subtracted in 200 components = 8.34261e-05 Jy
! Clean residual min=-0.000743 max=0.000704 Jy/beam
! Clean residual mean=0.000000 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.081989 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 57 components and 0.081989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051518Jy  sigma=0.463057
! Fit after  self-cal, rms=0.051518Jy  sigma=0.463057
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051518Jy  sigma=0.463057
! Fit after  self-cal, rms=0.051394Jy  sigma=0.463051
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.091 mas, bmaj=3.947 mas, bpa=0.8221 degrees
! Estimated noise=0.558005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.24696e-05 Jy
! Component: 100  -  total flux cleaned = 0.000107964 Jy
! Component: 150  -  total flux cleaned = 0.000127634 Jy
! Component: 200  -  total flux cleaned = 0.000132396 Jy
! Total flux subtracted in 200 components = 0.000132396 Jy
! Clean residual min=-0.000777 max=0.000851 Jy/beam
! Clean residual mean=0.000000 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0821214 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.0821214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051393Jy  sigma=0.463049
! Fit after  self-cal, rms=0.051393Jy  sigma=0.463048
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.26208e-06 Jy
! Component: 100  -  total flux cleaned = 6.76476e-06 Jy
! Component: 150  -  total flux cleaned = 1.53139e-05 Jy
! Component: 200  -  total flux cleaned = 1.53202e-05 Jy
! Total flux subtracted in 200 components = 1.53202e-05 Jy
! Clean residual min=-0.000774 max=0.000844 Jy/beam
! Clean residual mean=0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0821368 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 70 components and 0.0821368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051393Jy  sigma=0.463047
! Fit after  self-cal, rms=0.051393Jy  sigma=0.463045
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8247 mas, bmaj=2.009 mas, bpa=-1.965 degrees
! Estimated noise=0.422838 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8247 x 2.009 at -1.965 degrees (North through East)
! Clean map  min=-0.00065803  max=0.056252 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6395 mas, bmaj=1.646 mas, bpa=-2.658 degrees
! Estimated noise=0.862122 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0382646 Jy
! Component: 100  -  total flux cleaned = 0.0556308 Jy
! Component: 150  -  total flux cleaned = 0.0654265 Jy
! Component: 200  -  total flux cleaned = 0.0711675 Jy
! Total flux subtracted in 200 components = 0.0711675 Jy
! Clean residual min=-0.001789 max=0.002880 Jy/beam
! Clean residual mean=0.000002 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.0711675 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0711675 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8247 mas, bmaj=2.009 mas, bpa=-1.965 degrees
! Estimated noise=0.422838 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00531428 Jy
! Component: 100  -  total flux cleaned = 0.00781315 Jy
! Component: 150  -  total flux cleaned = 0.00914585 Jy
! Component: 200  -  total flux cleaned = 0.0100139 Jy
! Total flux subtracted in 200 components = 0.0100139 Jy
! Clean residual min=-0.000857 max=0.000742 Jy/beam
! Clean residual mean=0.000000 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.0811814 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.0811814 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.091 mas, bmaj=3.947 mas, bpa=0.8221 degrees
! Estimated noise=0.558005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000728532 Jy
! Component: 100  -  total flux cleaned = 0.00105914 Jy
! Component: 150  -  total flux cleaned = 0.00118476 Jy
! Component: 200  -  total flux cleaned = 0.00125538 Jy
! Total flux subtracted in 200 components = 0.00125538 Jy
! Clean residual min=-0.000791 max=0.000825 Jy/beam
! Clean residual mean=0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0824368 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.70334e-05 Jy
! Component: 100  -  total flux cleaned = 1.70752e-05 Jy
! Component: 150  -  total flux cleaned = 1.75483e-05 Jy
! Component: 200  -  total flux cleaned = 2.35984e-05 Jy
! Total flux subtracted in 200 components = 2.35984e-05 Jy
! Clean residual min=-0.000781 max=0.000810 Jy/beam
! Clean residual mean=0.000000 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.0824604 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 41 components and 0.0824604 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8247 mas, bmaj=2.009 mas, bpa=-1.965 degrees
! Estimated noise=0.422838 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167053 Jy
! Component: 100  -  total flux cleaned = 0.000121659 Jy
! Component: 150  -  total flux cleaned = 0.000121771 Jy
! Component: 200  -  total flux cleaned = 0.000121709 Jy
! Total flux subtracted in 200 components = 0.000121709 Jy
! Clean residual min=-0.000762 max=0.000738 Jy/beam
! Clean residual mean=0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0825821 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 55 components and 0.0825821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051400Jy  sigma=0.463114
! Fit after  self-cal, rms=0.051400Jy  sigma=0.463078
wmodel J2214-1257_X_map.mod
! Writing 55 model components to file: J2214-1257_X_map.mod
wobs   J2214-1257_X_uvs.fits
! Writing UV FITS file: J2214-1257_X_uvs.fits
wwins  J2214-1257_X_map.win
! wwins: Wrote 3 windows to J2214-1257_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -9.95963e-05 Jy
! Component: 100  -  total flux cleaned = -0.000164046 Jy
! Component: 150  -  total flux cleaned = -0.000275097 Jy
! Component: 200  -  total flux cleaned = -0.000370431 Jy
! Component: 250  -  total flux cleaned = -0.000439798 Jy
! Component: 300  -  total flux cleaned = -0.000496169 Jy
! Component: 350  -  total flux cleaned = -0.000540396 Jy
! Component: 400  -  total flux cleaned = -0.000594493 Jy
! Component: 450  -  total flux cleaned = -0.000594541 Jy
! Component: 500  -  total flux cleaned = -0.000615408 Jy
! Component: 550  -  total flux cleaned = -0.000656418 Jy
! Component: 600  -  total flux cleaned = -0.000676408 Jy
! Component: 650  -  total flux cleaned = -0.00067644 Jy
! Component: 700  -  total flux cleaned = -0.000686272 Jy
! Component: 750  -  total flux cleaned = -0.000715167 Jy
! Component: 800  -  total flux cleaned = -0.000724594 Jy
! Component: 850  -  total flux cleaned = -0.000734032 Jy
! Component: 900  -  total flux cleaned = -0.000734055 Jy
! Component: 950  -  total flux cleaned = -0.00076151 Jy
! Component: 1000  -  total flux cleaned = -0.000761425 Jy
! Component: 1050  -  total flux cleaned = -0.000761314 Jy
! Component: 1100  -  total flux cleaned = -0.000752489 Jy
! Component: 1150  -  total flux cleaned = -0.000769986 Jy
! Component: 1200  -  total flux cleaned = -0.000744158 Jy
! Component: 1250  -  total flux cleaned = -0.000769767 Jy
! Component: 1300  -  total flux cleaned = -0.000778093 Jy
! Component: 1350  -  total flux cleaned = -0.000761368 Jy
! Component: 1400  -  total flux cleaned = -0.00076972 Jy
! Component: 1450  -  total flux cleaned = -0.00074512 Jy
! Component: 1500  -  total flux cleaned = -0.000736982 Jy
! Component: 1550  -  total flux cleaned = -0.00074496 Jy
! Component: 1600  -  total flux cleaned = -0.00072113 Jy
! Component: 1650  -  total flux cleaned = -0.000705423 Jy
! Component: 1700  -  total flux cleaned = -0.000681888 Jy
! Component: 1750  -  total flux cleaned = -0.000681945 Jy
! Component: 1800  -  total flux cleaned = -0.000689606 Jy
! Component: 1850  -  total flux cleaned = -0.00066673 Jy
! Component: 1900  -  total flux cleaned = -0.000644013 Jy
! Component: 1950  -  total flux cleaned = -0.000636546 Jy
! Component: 2000  -  total flux cleaned = -0.000629119 Jy
! Component: 2050  -  total flux cleaned = -0.000614311 Jy
! Component: 2100  -  total flux cleaned = -0.000592285 Jy
! Component: 2150  -  total flux cleaned = -0.000599618 Jy
! Component: 2200  -  total flux cleaned = -0.000577928 Jy
! Component: 2250  -  total flux cleaned = -0.000556552 Jy
! Component: 2300  -  total flux cleaned = -0.000591927 Jy
! Component: 2350  -  total flux cleaned = -0.000570696 Jy
! Component: 2400  -  total flux cleaned = -0.000563656 Jy
! Component: 2450  -  total flux cleaned = -0.000556732 Jy
! Component: 2500  -  total flux cleaned = -0.000563569 Jy
! Component: 2550  -  total flux cleaned = -0.000584078 Jy
! Component: 2600  -  total flux cleaned = -0.000563754 Jy
! Component: 2650  -  total flux cleaned = -0.000590754 Jy
! Component: 2700  -  total flux cleaned = -0.000617541 Jy
! Component: 2750  -  total flux cleaned = -0.000624218 Jy
! Component: 2800  -  total flux cleaned = -0.000637463 Jy
! Component: 2850  -  total flux cleaned = -0.000630836 Jy
! Component: 2900  -  total flux cleaned = -0.000663497 Jy
! Component: 2950  -  total flux cleaned = -0.000669949 Jy
! Component: 3000  -  total flux cleaned = -0.000689343 Jy
! Component: 3050  -  total flux cleaned = -0.000708586 Jy
! Component: 3100  -  total flux cleaned = -0.00067036 Jy
! Component: 3150  -  total flux cleaned = -0.000708415 Jy
! Component: 3200  -  total flux cleaned = -0.000714723 Jy
! Component: 3250  -  total flux cleaned = -0.000745946 Jy
! Component: 3300  -  total flux cleaned = -0.000752163 Jy
! Component: 3350  -  total flux cleaned = -0.000758242 Jy
! Component: 3400  -  total flux cleaned = -0.000770488 Jy
! Component: 3450  -  total flux cleaned = -0.000758183 Jy
! Component: 3500  -  total flux cleaned = -0.000739974 Jy
! Component: 3550  -  total flux cleaned = -0.000752053 Jy
! Component: 3600  -  total flux cleaned = -0.000764092 Jy
! Component: 3650  -  total flux cleaned = -0.000770096 Jy
! Component: 3700  -  total flux cleaned = -0.000787906 Jy
! Component: 3750  -  total flux cleaned = -0.000805663 Jy
! Component: 3800  -  total flux cleaned = -0.00084673 Jy
! Component: 3850  -  total flux cleaned = -0.000840888 Jy
! Component: 3900  -  total flux cleaned = -0.00085827 Jy
! Component: 3950  -  total flux cleaned = -0.000864006 Jy
! Component: 4000  -  total flux cleaned = -0.000858324 Jy
! Component: 4050  -  total flux cleaned = -0.000875494 Jy
! Total flux subtracted in 4096 components = -0.000875486 Jy
! Clean residual min=-0.000314 max=0.000315 Jy/beam
! Clean residual mean=-0.000000 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.0817066 Jy
keep
! Adding 317 model components to the UV plane model.
! The established model now contains 372 components and 0.0817066 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2214-1257_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8247 x 2.009 at -1.965 degrees (North through East)
! Clean map  min=-0.00053063  max=0.055945 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2214-1257_X_map.fits
wmodel /image_prod/ug002_uva//J2214-1257_X_map.mod
! Writing 372 model components to file: /image_prod/ug002_uva//J2214-1257_X_map.mod
wobs   /image_prod/ug002_uva//J2214-1257_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2214-1257_X_uvs.fits
wwins  /image_prod/ug002_uva//J2214-1257_X_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2214-1257_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0559449 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.82047e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.526614 0.526614 1.05323 2.10646 4.21291 8.42583 16.8517 33.7033 67.4066
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.055 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  569.676 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2214-1257_X_dfm.log closed on Thu Mar  5 05:35:15 2020