! Started logfile: /image_prod/ug002_uva//J2211+1841_S_dfm.log on Thu Mar  5 05:30:58 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2211+1841_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2211+1841_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.83287 visibilities/baseline/integration-bin.
! Found source: J2211+1841
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5397 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2211+1841_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009444Jy  sigma=8.878484
! Fit after  self-cal, rms=0.913135Jy  sigma=8.067378
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.922 mas, bmaj=10.92 mas, bpa=-19.54 degrees
! Estimated noise=1.55815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0660658 Jy
! Component: 100  -  total flux cleaned = 0.0835617 Jy
! Total flux subtracted in 100 components = 0.0835617 Jy
! Clean residual min=-0.004569 max=0.007428 Jy/beam
! Clean residual mean=-0.000011 rms=0.001436 Jy/beam
! Combined flux in latest and established models = 0.0835617 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0835617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063589Jy  sigma=0.505377
! Fit after  self-cal, rms=0.062698Jy  sigma=0.497813
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.46 mas, bmaj=11.09 mas, bpa=-19.31 degrees
! Estimated noise=1.13181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00912594 Jy
! Component: 100  -  total flux cleaned = 0.0129986 Jy
! Component: 150  -  total flux cleaned = 0.0135981 Jy
! Component: 200  -  total flux cleaned = 0.0138854 Jy
! Total flux subtracted in 200 components = 0.0138854 Jy
! Clean residual min=-0.004666 max=0.005127 Jy/beam
! Clean residual mean=-0.000002 rms=0.001279 Jy/beam
! Combined flux in latest and established models = 0.0974471 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 36 components and 0.0974471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061289Jy  sigma=0.487306
! Fit after  self-cal, rms=0.061248Jy  sigma=0.487066
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.46 x 11.09 at -19.31 degrees (North through East)
! Clean map  min=-0.0045319  max=0.087219 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.09     HN        0.98     KP        0.97     
!   LA        0.99     MK        1.03     NL        1.04     OV        0.99     
!   PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.09     HN        0.98     KP        0.99     
!   LA        1.03     MK        0.99     NL        1.03     OV        0.82     
!   PT        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     HN        0.93     KP        0.98     
!   LA        1.02     MK        1.05     NL        1.14     OV        0.98     
!   PT        0.98     
! 
! 
! Fit before self-cal, rms=0.061248Jy  sigma=0.487066
! Fit after  self-cal, rms=0.059716Jy  sigma=0.481630
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.482 mas, bmaj=10.96 mas, bpa=-19.26 degrees
! Estimated noise=1.1242 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00068365 Jy
! Component: 100  -  total flux cleaned = 0.000938894 Jy
! Component: 150  -  total flux cleaned = 0.00100889 Jy
! Component: 200  -  total flux cleaned = 0.0010392 Jy
! Total flux subtracted in 200 components = 0.0010392 Jy
! Clean residual min=-0.004084 max=0.004274 Jy/beam
! Clean residual mean=-0.000009 rms=0.001183 Jy/beam
! Combined flux in latest and established models = 0.0984863 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 55 components and 0.0984863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059647Jy  sigma=0.481186
! Fit after  self-cal, rms=0.059647Jy  sigma=0.480963
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059647Jy  sigma=0.480963
! Fit after  self-cal, rms=0.059855Jy  sigma=0.460869
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.489 mas, bmaj=10.93 mas, bpa=-19.19 degrees
! Estimated noise=1.1211 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126498 Jy
! Component: 100  -  total flux cleaned = 0.001463 Jy
! Component: 150  -  total flux cleaned = 0.00154288 Jy
! Component: 200  -  total flux cleaned = 0.00164086 Jy
! Total flux subtracted in 200 components = 0.00164086 Jy
! Clean residual min=-0.001881 max=0.002041 Jy/beam
! Clean residual mean=0.000001 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.100127 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.100127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059810Jy  sigma=0.460457
! Fit after  self-cal, rms=0.059946Jy  sigma=0.459950
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.96941e-05 Jy
! Component: 100  -  total flux cleaned = 8.49412e-05 Jy
! Component: 150  -  total flux cleaned = 0.000141356 Jy
! Component: 200  -  total flux cleaned = 0.000175307 Jy
! Total flux subtracted in 200 components = 0.000175307 Jy
! Clean residual min=-0.001840 max=0.002042 Jy/beam
! Clean residual mean=0.000001 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.100302 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 73 components and 0.100302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059930Jy  sigma=0.459834
! Fit after  self-cal, rms=0.059929Jy  sigma=0.459818
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059929Jy  sigma=0.459818
! Fit after  self-cal, rms=0.059712Jy  sigma=0.459715
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.487 mas, bmaj=10.91 mas, bpa=-19.2 degrees
! Estimated noise=1.11695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000416712 Jy
! Component: 100  -  total flux cleaned = 0.00054767 Jy
! Component: 150  -  total flux cleaned = 0.000643967 Jy
! Component: 200  -  total flux cleaned = 0.000746659 Jy
! Total flux subtracted in 200 components = 0.000746659 Jy
! Clean residual min=-0.001910 max=0.002010 Jy/beam
! Clean residual mean=0.000001 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.101049 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 78 components and 0.101049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059696Jy  sigma=0.459584
! Fit after  self-cal, rms=0.059696Jy  sigma=0.459573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.69928e-05 Jy
! Component: 100  -  total flux cleaned = 3.81758e-06 Jy
! Component: 150  -  total flux cleaned = 4.77942e-05 Jy
! Component: 200  -  total flux cleaned = 7.4811e-05 Jy
! Total flux subtracted in 200 components = 7.4811e-05 Jy
! Clean residual min=-0.001896 max=0.001982 Jy/beam
! Clean residual mean=0.000001 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.101124 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 82 components and 0.101124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059687Jy  sigma=0.459514
! Fit after  self-cal, rms=0.059687Jy  sigma=0.459507
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059687Jy  sigma=0.459507
! Fit after  self-cal, rms=0.059446Jy  sigma=0.459484
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.385 mas, bmaj=11.59 mas, bpa=-16.58 degrees
! Estimated noise=1.32846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.71527e-05 Jy
! Component: 100  -  total flux cleaned = -2.89089e-07 Jy
! Component: 150  -  total flux cleaned = 6.53917e-05 Jy
! Component: 200  -  total flux cleaned = 9.89055e-05 Jy
! Total flux subtracted in 200 components = 9.89055e-05 Jy
! Clean residual min=-0.002054 max=0.001905 Jy/beam
! Clean residual mean=-0.000000 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.101223 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 91 components and 0.101223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059445Jy  sigma=0.459475
! Fit after  self-cal, rms=0.059441Jy  sigma=0.459459
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.66573e-05 Jy
! Component: 100  -  total flux cleaned = 4.89678e-05 Jy
! Component: 150  -  total flux cleaned = 8.65574e-05 Jy
! Component: 200  -  total flux cleaned = 0.000111768 Jy
! Total flux subtracted in 200 components = 0.000111768 Jy
! Clean residual min=-0.002055 max=0.001910 Jy/beam
! Clean residual mean=0.000000 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.101335 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 100 components and 0.101335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059439Jy  sigma=0.459458
! Fit after  self-cal, rms=0.059439Jy  sigma=0.459454
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.487 mas, bmaj=10.91 mas, bpa=-19.21 degrees
! Estimated noise=1.11388 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.487 x 10.91 at -19.21 degrees (North through East)
! Clean map  min=-0.0019232  max=0.085735 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.956 mas, bmaj=10.72 mas, bpa=-19.54 degrees
! Estimated noise=1.53692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0655237 Jy
! Component: 100  -  total flux cleaned = 0.0826707 Jy
! Component: 150  -  total flux cleaned = 0.0903457 Jy
! Component: 200  -  total flux cleaned = 0.0946407 Jy
! Total flux subtracted in 200 components = 0.0946407 Jy
! Clean residual min=-0.002913 max=0.003047 Jy/beam
! Clean residual mean=-0.000005 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.0946407 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0946407 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.487 mas, bmaj=10.91 mas, bpa=-19.21 degrees
! Estimated noise=1.11388 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00346131 Jy
! Component: 100  -  total flux cleaned = 0.00507973 Jy
! Component: 150  -  total flux cleaned = 0.00538341 Jy
! Component: 200  -  total flux cleaned = 0.0056305 Jy
! Total flux subtracted in 200 components = 0.0056305 Jy
! Clean residual min=-0.002224 max=0.002415 Jy/beam
! Clean residual mean=-0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.100271 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.100271 Jy
! Inverting map 
! Added new window around map position (-5.5, -115.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103665 Jy
! Component: 100  -  total flux cleaned = 0.000947268 Jy
! Component: 150  -  total flux cleaned = 0.000947582 Jy
! Component: 200  -  total flux cleaned = 0.000947196 Jy
! Total flux subtracted in 200 components = 0.000947196 Jy
! Clean residual min=-0.001976 max=0.002093 Jy/beam
! Clean residual mean=-0.000001 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.101218 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 58 components and 0.101218 Jy
! Inverting map 
! Added new window around map position (-114.5, -65).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129277 Jy
! Component: 100  -  total flux cleaned = 0.0012144 Jy
! Component: 150  -  total flux cleaned = 0.00117567 Jy
! Component: 200  -  total flux cleaned = 0.00120611 Jy
! Total flux subtracted in 200 components = 0.00120611 Jy
! Clean residual min=-0.002008 max=0.001694 Jy/beam
! Clean residual mean=0.000000 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.102425 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 79 components and 0.102425 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.385 mas, bmaj=11.59 mas, bpa=-16.58 degrees
! Estimated noise=1.32846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000340852 Jy
! Component: 100  -  total flux cleaned = -0.000250079 Jy
! Component: 150  -  total flux cleaned = -0.000196229 Jy
! Component: 200  -  total flux cleaned = -0.000148854 Jy
! Total flux subtracted in 200 components = -0.000148854 Jy
! Clean residual min=-0.001923 max=0.001712 Jy/beam
! Clean residual mean=0.000000 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.102276 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.32062e-05 Jy
! Component: 100  -  total flux cleaned = -4.21922e-06 Jy
! Component: 150  -  total flux cleaned = -2.33032e-05 Jy
! Component: 200  -  total flux cleaned = -2.26629e-05 Jy
! Total flux subtracted in 200 components = -2.26629e-05 Jy
! Clean residual min=-0.001834 max=0.001638 Jy/beam
! Clean residual mean=0.000001 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.102253 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 112 components and 0.102253 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.487 mas, bmaj=10.91 mas, bpa=-19.21 degrees
! Estimated noise=1.11388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.85933e-05 Jy
! Component: 100  -  total flux cleaned = -6.53355e-05 Jy
! Component: 150  -  total flux cleaned = -8.90904e-05 Jy
! Component: 200  -  total flux cleaned = -2.35758e-05 Jy
! Total flux subtracted in 200 components = -2.35758e-05 Jy
! Clean residual min=-0.001875 max=0.001650 Jy/beam
! Clean residual mean=0.000001 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.102229 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 132 components and 0.102229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059294Jy  sigma=0.458420
! Fit after  self-cal, rms=0.059277Jy  sigma=0.458273
wmodel J2211+1841_S_map.mod
! Writing 132 model components to file: J2211+1841_S_map.mod
wobs   J2211+1841_S_uvs.fits
! Writing UV FITS file: J2211+1841_S_uvs.fits
wwins  J2211+1841_S_map.win
! wwins: Wrote 3 windows to J2211+1841_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.97769e-05 Jy
! Component: 100  -  total flux cleaned = 6.8151e-05 Jy
! Component: 150  -  total flux cleaned = 0.000122281 Jy
! Component: 200  -  total flux cleaned = 0.000200017 Jy
! Component: 250  -  total flux cleaned = 0.000124684 Jy
! Component: 300  -  total flux cleaned = 2.72821e-05 Jy
! Component: 350  -  total flux cleaned = -0.000136842 Jy
! Component: 400  -  total flux cleaned = -0.000273497 Jy
! Component: 450  -  total flux cleaned = -0.000362664 Jy
! Component: 500  -  total flux cleaned = -0.000428276 Jy
! Component: 550  -  total flux cleaned = -0.000449445 Jy
! Component: 600  -  total flux cleaned = -0.000511723 Jy
! Component: 650  -  total flux cleaned = -0.000491607 Jy
! Component: 700  -  total flux cleaned = -0.000532178 Jy
! Component: 750  -  total flux cleaned = -0.000630104 Jy
! Component: 800  -  total flux cleaned = -0.000610547 Jy
! Component: 850  -  total flux cleaned = -0.000610067 Jy
! Component: 900  -  total flux cleaned = -0.000684416 Jy
! Component: 950  -  total flux cleaned = -0.00062891 Jy
! Component: 1000  -  total flux cleaned = -0.000683058 Jy
! Component: 1050  -  total flux cleaned = -0.000700573 Jy
! Component: 1100  -  total flux cleaned = -0.000683307 Jy
! Component: 1150  -  total flux cleaned = -0.000804136 Jy
! Component: 1200  -  total flux cleaned = -0.000787079 Jy
! Component: 1250  -  total flux cleaned = -0.000820797 Jy
! Component: 1300  -  total flux cleaned = -0.000870619 Jy
! Component: 1350  -  total flux cleaned = -0.00091993 Jy
! Component: 1400  -  total flux cleaned = -0.000952241 Jy
! Component: 1450  -  total flux cleaned = -0.00101561 Jy
! Component: 1500  -  total flux cleaned = -0.00101538 Jy
! Component: 1550  -  total flux cleaned = -0.00103139 Jy
! Component: 1600  -  total flux cleaned = -0.00110815 Jy
! Component: 1650  -  total flux cleaned = -0.00119882 Jy
! Component: 1700  -  total flux cleaned = -0.00119869 Jy
! Component: 1750  -  total flux cleaned = -0.00125778 Jy
! Component: 1800  -  total flux cleaned = -0.00122875 Jy
! Component: 1850  -  total flux cleaned = -0.00125757 Jy
! Component: 1900  -  total flux cleaned = -0.00131476 Jy
! Component: 1950  -  total flux cleaned = -0.0012864 Jy
! Component: 2000  -  total flux cleaned = -0.00123065 Jy
! Component: 2050  -  total flux cleaned = -0.00123067 Jy
! Component: 2100  -  total flux cleaned = -0.00127179 Jy
! Component: 2150  -  total flux cleaned = -0.00124477 Jy
! Component: 2200  -  total flux cleaned = -0.00123159 Jy
! Component: 2250  -  total flux cleaned = -0.0012449 Jy
! Component: 2300  -  total flux cleaned = -0.00125813 Jy
! Component: 2350  -  total flux cleaned = -0.00120586 Jy
! Component: 2400  -  total flux cleaned = -0.00120606 Jy
! Component: 2450  -  total flux cleaned = -0.00124444 Jy
! Component: 2500  -  total flux cleaned = -0.00125697 Jy
! Component: 2550  -  total flux cleaned = -0.00121929 Jy
! Component: 2600  -  total flux cleaned = -0.00120705 Jy
! Component: 2650  -  total flux cleaned = -0.001207 Jy
! Component: 2700  -  total flux cleaned = -0.00123148 Jy
! Component: 2750  -  total flux cleaned = -0.00121938 Jy
! Component: 2800  -  total flux cleaned = -0.00120738 Jy
! Component: 2850  -  total flux cleaned = -0.00121921 Jy
! Component: 2900  -  total flux cleaned = -0.00121922 Jy
! Component: 2950  -  total flux cleaned = -0.00126598 Jy
! Component: 3000  -  total flux cleaned = -0.00123102 Jy
! Component: 3050  -  total flux cleaned = -0.00118507 Jy
! Component: 3100  -  total flux cleaned = -0.00119646 Jy
! Component: 3150  -  total flux cleaned = -0.00123039 Jy
! Component: 3200  -  total flux cleaned = -0.00118526 Jy
! Component: 3250  -  total flux cleaned = -0.00116279 Jy
! Component: 3300  -  total flux cleaned = -0.00115183 Jy
! Component: 3350  -  total flux cleaned = -0.00116287 Jy
! Component: 3400  -  total flux cleaned = -0.00114109 Jy
! Component: 3450  -  total flux cleaned = -0.00114101 Jy
! Component: 3500  -  total flux cleaned = -0.00113035 Jy
! Component: 3550  -  total flux cleaned = -0.00117314 Jy
! Component: 3600  -  total flux cleaned = -0.00114127 Jy
! Component: 3650  -  total flux cleaned = -0.00109919 Jy
! Component: 3700  -  total flux cleaned = -0.00113065 Jy
! Component: 3750  -  total flux cleaned = -0.00108904 Jy
! Component: 3800  -  total flux cleaned = -0.00105808 Jy
! Component: 3850  -  total flux cleaned = -0.00103763 Jy
! Component: 3900  -  total flux cleaned = -0.00106815 Jy
! Component: 3950  -  total flux cleaned = -0.00104794 Jy
! Component: 4000  -  total flux cleaned = -0.00101767 Jy
! Component: 4050  -  total flux cleaned = -0.0010277 Jy
! Total flux subtracted in 4096 components = -0.00100782 Jy
! Clean residual min=-0.000663 max=0.000652 Jy/beam
! Clean residual mean=0.000001 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.101222 Jy
keep
! Adding 301 model components to the UV plane model.
! The established model now contains 433 components and 0.101222 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2211+1841_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.487 x 10.91 at -19.21 degrees (North through East)
! Clean map  min=-0.0012582  max=0.085487 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2211+1841_S_map.fits
wmodel /image_prod/ug002_uva//J2211+1841_S_map.mod
! Writing 433 model components to file: /image_prod/ug002_uva//J2211+1841_S_map.mod
wobs   /image_prod/ug002_uva//J2211+1841_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2211+1841_S_uvs.fits
wwins  /image_prod/ug002_uva//J2211+1841_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2211+1841_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0854868 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000189218 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.664024 0.664024 1.32805 2.65609 5.31219 10.6244 21.2488 42.4975 84.995
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.085 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  451.791 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2211+1841_S_dfm.log closed on Thu Mar  5 05:31:03 2020