! Started logfile: /image_prod/ug002_uva//J2206-1835_S_dfm.log on Thu Mar  5 05:28:56 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2206-1835_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2206-1835_S_uva.fits
! AN table 1: 76 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.856516 visibilities/baseline/integration-bin.
! Found source: J2206-1835
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4101 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2206-1835_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.255946Jy  sigma=6.301704
! Fit after  self-cal, rms=0.956923Jy  sigma=5.267604
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.831 mas, bmaj=18.09 mas, bpa=-12.29 degrees
! Estimated noise=3.22912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.156549 Jy
! Component: 100  -  total flux cleaned = 0.265151 Jy
! Total flux subtracted in 100 components = 0.265151 Jy
! Clean residual min=-0.063498 max=0.065075 Jy/beam
! Clean residual mean=-0.000564 rms=0.024970 Jy/beam
! Combined flux in latest and established models = 0.265151 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 58 components and 0.265151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.655885Jy  sigma=2.066048
! Fit after  self-cal, rms=0.654439Jy  sigma=2.058346
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.396 mas, bmaj=18.89 mas, bpa=-11.8 degrees
! Estimated noise=2.01906 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.155039 Jy
! Component: 100  -  total flux cleaned = 0.25599 Jy
! Component: 150  -  total flux cleaned = 0.35094 Jy
! Component: 200  -  total flux cleaned = 0.433821 Jy
! Total flux subtracted in 200 components = 0.433821 Jy
! Clean residual min=-0.066093 max=0.066319 Jy/beam
! Clean residual mean=-0.000932 rms=0.035118 Jy/beam
! Combined flux in latest and established models = 0.698972 Jy
! Performing phase self-cal
! Adding 165 model components to the UV plane model.
! The established model now contains 215 components and 0.698972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.528423Jy  sigma=1.625447
! Fit after  self-cal, rms=0.526528Jy  sigma=1.619373
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.396 x 18.89 at -11.8 degrees (North through East)
! Clean map  min=-0.080414  max=0.19945 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.31     HN        0.85     LA        0.66     MK        1.77     
!   NL        1.54     OV        1.49     PT        0.52     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     HN        0.81     LA        0.65     MK        1.29     
!   NL        1.77     OV        1.63     PT        0.48     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.88     HN        1.11     LA        0.62     MK        1.55     
!   NL        1.71     OV        1.81     PT        0.44     
! 
! 
! Fit before self-cal, rms=0.526528Jy  sigma=1.619373
! Fit after  self-cal, rms=0.358275Jy  sigma=0.881171
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.719 mas, bmaj=20.62 mas, bpa=-10.98 degrees
! Estimated noise=1.8408 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.031527 Jy
! Component: 100  -  total flux cleaned = 0.0300145 Jy
! Component: 150  -  total flux cleaned = 0.018265 Jy
! Component: 200  -  total flux cleaned = 0.008796 Jy
! Total flux subtracted in 200 components = 0.008796 Jy
! Clean residual min=-0.021586 max=0.021473 Jy/beam
! Clean residual mean=-0.000334 rms=0.009064 Jy/beam
! Combined flux in latest and established models = 0.707768 Jy
! Performing phase self-cal
! Adding 98 model components to the UV plane model.
! The established model now contains 313 components and 0.707768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.323154Jy  sigma=0.685954
! Fit after  self-cal, rms=0.323687Jy  sigma=0.673165
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.323687Jy  sigma=0.673165
! Fit after  self-cal, rms=0.198193Jy  sigma=0.586643
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.748 mas, bmaj=20.03 mas, bpa=-10.55 degrees
! Estimated noise=1.68416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211984 Jy
! Component: 100  -  total flux cleaned = 0.0318054 Jy
! Component: 150  -  total flux cleaned = 0.0386199 Jy
! Component: 200  -  total flux cleaned = 0.0448163 Jy
! Total flux subtracted in 200 components = 0.0448163 Jy
! Clean residual min=-0.012528 max=0.012434 Jy/beam
! Clean residual mean=-0.000061 rms=0.005191 Jy/beam
! Combined flux in latest and established models = 0.752585 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 388 components and 0.752585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.179677Jy  sigma=0.518857
! Fit after  self-cal, rms=0.178696Jy  sigma=0.516607
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312279 Jy
! Component: 100  -  total flux cleaned = 0.00646836 Jy
! Component: 150  -  total flux cleaned = 0.00770991 Jy
! Component: 200  -  total flux cleaned = 0.00769473 Jy
! Total flux subtracted in 200 components = 0.00769473 Jy
! Clean residual min=-0.009694 max=0.009731 Jy/beam
! Clean residual mean=-0.000054 rms=0.004197 Jy/beam
! Combined flux in latest and established models = 0.760279 Jy
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 459 components and 0.760279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.167268Jy  sigma=0.487222
! Fit after  self-cal, rms=0.166783Jy  sigma=0.486556
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166783Jy  sigma=0.486556
! Fit after  self-cal, rms=0.129213Jy  sigma=0.471471
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.83 mas, bmaj=19.43 mas, bpa=-10.29 degrees
! Estimated noise=1.63949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121242 Jy
! Component: 100  -  total flux cleaned = 0.0199259 Jy
! Component: 150  -  total flux cleaned = 0.0257445 Jy
! Component: 200  -  total flux cleaned = 0.0284104 Jy
! Total flux subtracted in 200 components = 0.0284104 Jy
! Clean residual min=-0.006072 max=0.006055 Jy/beam
! Clean residual mean=-0.000029 rms=0.002538 Jy/beam
! Combined flux in latest and established models = 0.78869 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 528 components and 0.78869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124087Jy  sigma=0.446547
! Fit after  self-cal, rms=0.123552Jy  sigma=0.445958
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325415 Jy
! Component: 100  -  total flux cleaned = 0.00557388 Jy
! Component: 150  -  total flux cleaned = 0.0083599 Jy
! Component: 200  -  total flux cleaned = 0.00952572 Jy
! Total flux subtracted in 200 components = 0.00952572 Jy
! Clean residual min=-0.004678 max=0.004658 Jy/beam
! Clean residual mean=-0.000021 rms=0.002020 Jy/beam
! Combined flux in latest and established models = 0.798215 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 575 components and 0.798215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120254Jy  sigma=0.435925
! Fit after  self-cal, rms=0.120008Jy  sigma=0.435691
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120008Jy  sigma=0.435691
! Fit after  self-cal, rms=0.111110Jy  sigma=0.432102
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.058 mas, bmaj=22.24 mas, bpa=-2.089 degrees
! Estimated noise=1.85044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00938503 Jy
! Component: 100  -  total flux cleaned = 0.0122601 Jy
! Component: 150  -  total flux cleaned = 0.0133521 Jy
! Component: 200  -  total flux cleaned = 0.0140935 Jy
! Total flux subtracted in 200 components = 0.0140935 Jy
! Clean residual min=-0.003864 max=0.003889 Jy/beam
! Clean residual mean=-0.000023 rms=0.001667 Jy/beam
! Combined flux in latest and established models = 0.812309 Jy
selfcal
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 641 components and 0.812309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109497Jy  sigma=0.424348
! Fit after  self-cal, rms=0.109211Jy  sigma=0.423871
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163664 Jy
! Component: 100  -  total flux cleaned = 0.00224838 Jy
! Component: 150  -  total flux cleaned = 0.00299176 Jy
! Component: 200  -  total flux cleaned = 0.00387151 Jy
! Total flux subtracted in 200 components = 0.00387151 Jy
! Clean residual min=-0.002779 max=0.002802 Jy/beam
! Clean residual mean=-0.000013 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.81618 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 698 components and 0.81618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108372Jy  sigma=0.421041
! Fit after  self-cal, rms=0.108205Jy  sigma=0.420843
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.84 mas, bmaj=19.19 mas, bpa=-10.28 degrees
! Estimated noise=1.61521 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.84 x 19.19 at -10.28 degrees (North through East)
! Clean map  min=-0.029343  max=0.14939 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.258 mas, bmaj=18.91 mas, bpa=-10.68 degrees
! Estimated noise=2.83504 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134633 Jy
! Component: 100  -  total flux cleaned = 0.219447 Jy
! Component: 150  -  total flux cleaned = 0.267942 Jy
! Component: 200  -  total flux cleaned = 0.299497 Jy
! Total flux subtracted in 200 components = 0.299497 Jy
! Clean residual min=-0.037042 max=0.037390 Jy/beam
! Clean residual mean=-0.000344 rms=0.015558 Jy/beam
! Combined flux in latest and established models = 0.299497 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 111 model components to the UV plane model.
! The established model now contains 111 components and 0.299497 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.84 mas, bmaj=19.19 mas, bpa=-10.28 degrees
! Estimated noise=1.61521 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.054344 Jy
! Component: 100  -  total flux cleaned = 0.093683 Jy
! Component: 150  -  total flux cleaned = 0.13382 Jy
! Component: 200  -  total flux cleaned = 0.153224 Jy
! Total flux subtracted in 200 components = 0.153224 Jy
! Clean residual min=-0.030593 max=0.030626 Jy/beam
! Clean residual mean=-0.000368 rms=0.014414 Jy/beam
! Combined flux in latest and established models = 0.45272 Jy
! Adding 135 model components to the UV plane model.
! The established model now contains 234 components and 0.45272 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.058 mas, bmaj=22.24 mas, bpa=-2.089 degrees
! Estimated noise=1.85044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198831 Jy
! Component: 100  -  total flux cleaned = 0.0362509 Jy
! Component: 150  -  total flux cleaned = 0.0513134 Jy
! Component: 200  -  total flux cleaned = 0.0703264 Jy
! Total flux subtracted in 200 components = 0.0703264 Jy
! Clean residual min=-0.024274 max=0.024325 Jy/beam
! Clean residual mean=-0.000321 rms=0.011475 Jy/beam
! Combined flux in latest and established models = 0.523047 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00420592 Jy
! Component: 100  -  total flux cleaned = 0.00790126 Jy
! Component: 150  -  total flux cleaned = 0.00470979 Jy
! Component: 200  -  total flux cleaned = 0.000785109 Jy
! Total flux subtracted in 200 components = 0.000785109 Jy
! Clean residual min=-0.015254 max=0.015256 Jy/beam
! Clean residual mean=-0.000185 rms=0.006966 Jy/beam
! Combined flux in latest and established models = 0.523832 Jy
! Adding 212 model components to the UV plane model.
! The established model now contains 425 components and 0.523832 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.84 mas, bmaj=19.19 mas, bpa=-10.28 degrees
! Estimated noise=1.61521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0039084 Jy
! Component: 100  -  total flux cleaned = 0.00444496 Jy
! Component: 150  -  total flux cleaned = 0.00542262 Jy
! Component: 200  -  total flux cleaned = 0.00590972 Jy
! Total flux subtracted in 200 components = 0.00590972 Jy
! Clean residual min=-0.007404 max=0.007445 Jy/beam
! Clean residual mean=-0.000041 rms=0.003134 Jy/beam
! Combined flux in latest and established models = 0.529741 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 491 components and 0.529741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124258Jy  sigma=0.460072
! Fit after  self-cal, rms=0.123603Jy  sigma=0.454420
wmodel J2206-1835_S_map.mod
! Writing 491 model components to file: J2206-1835_S_map.mod
wobs   J2206-1835_S_uvs.fits
! Writing UV FITS file: J2206-1835_S_uvs.fits
wwins  J2206-1835_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /image_prod/ug002_uva//J2206-1835_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.84 x 19.19 at -10.28 degrees (North through East)
! Clean map  min=-0.037624  max=0.14126 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2206-1835_S_map.fits
wmodel /image_prod/ug002_uva//J2206-1835_S_map.mod
! Writing 491 model components to file: /image_prod/ug002_uva//J2206-1835_S_map.mod
wobs   /image_prod/ug002_uva//J2206-1835_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2206-1835_S_uvs.fits
wwins  /image_prod/ug002_uva//J2206-1835_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.141258 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00304545 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -6.46787 6.46787 12.9357 25.8715 51.743
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0091 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.141 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  46.383 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2206-1835_S_dfm.log closed on Thu Mar  5 05:28:59 2020