! Started logfile: /image_prod/ug002_uva//J2204+3632_S_dfm.log on Thu Mar 5 05:28:01 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2204+3632_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2204+3632_S_uva.fits ! AN table 1: 60 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.915476 visibilities/baseline/integration-bin. ! Found source: J2204+3632 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4614 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2204+3632_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006936Jy sigma=8.324797 ! Fit after self-cal, rms=0.923169Jy sigma=7.621598 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=5.402 mas, bpa=-8.476 degrees ! Estimated noise=1.74943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0614885 Jy ! Component: 100 - total flux cleaned = 0.0752052 Jy ! Total flux subtracted in 100 components = 0.0752052 Jy ! Clean residual min=-0.003650 max=0.004668 Jy/beam ! Clean residual mean=-0.000002 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.0752052 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0752052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067814Jy sigma=0.427314 ! Fit after self-cal, rms=0.067384Jy sigma=0.423978 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=6.21 mas, bpa=-6.065 degrees ! Estimated noise=1.33422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00542329 Jy ! Component: 100 - total flux cleaned = 0.00788574 Jy ! Component: 150 - total flux cleaned = 0.00918161 Jy ! Component: 200 - total flux cleaned = 0.00983192 Jy ! Total flux subtracted in 200 components = 0.00983192 Jy ! Clean residual min=-0.002064 max=0.002390 Jy/beam ! Clean residual mean=-0.000004 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0850372 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.0850372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067014Jy sigma=0.419235 ! Fit after self-cal, rms=0.067070Jy sigma=0.419173 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 6.21 at -6.065 degrees (North through East) ! Clean map min=-0.0019662 max=0.079907 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.01 LA 0.97 ! MK 0.98 OV 1.00 PT 0.99 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.01 LA 0.97 ! MK 0.98 OV 1.03 PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.01 LA 1.01 ! MK 0.97 OV 0.97 PT 1.00 SC 1.08 ! ! ! Fit before self-cal, rms=0.067070Jy sigma=0.419173 ! Fit after self-cal, rms=0.067736Jy sigma=0.418612 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.481 mas, bmaj=6.231 mas, bpa=-6.474 degrees ! Estimated noise=1.33355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101642 Jy ! Component: 100 - total flux cleaned = -0.000145514 Jy ! Component: 150 - total flux cleaned = -0.000201926 Jy ! Component: 200 - total flux cleaned = -0.000234795 Jy ! Total flux subtracted in 200 components = -0.000234795 Jy ! Clean residual min=-0.002018 max=0.002516 Jy/beam ! Clean residual mean=-0.000003 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0848024 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.0848024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067713Jy sigma=0.418537 ! Fit after self-cal, rms=0.067742Jy sigma=0.418514 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067742Jy sigma=0.418514 ! Fit after self-cal, rms=0.069210Jy sigma=0.416590 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=6.205 mas, bpa=-5.989 degrees ! Estimated noise=1.333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350697 Jy ! Component: 100 - total flux cleaned = 0.000335089 Jy ! Component: 150 - total flux cleaned = 0.00032043 Jy ! Component: 200 - total flux cleaned = 0.000320252 Jy ! Total flux subtracted in 200 components = 0.000320252 Jy ! Clean residual min=-0.002231 max=0.002129 Jy/beam ! Clean residual mean=-0.000004 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0851226 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 40 components and 0.0851226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069197Jy sigma=0.416552 ! Fit after self-cal, rms=0.069274Jy sigma=0.416486 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.81963e-05 Jy ! Component: 100 - total flux cleaned = 3.99305e-05 Jy ! Component: 150 - total flux cleaned = 1.54642e-05 Jy ! Component: 200 - total flux cleaned = -6.97651e-06 Jy ! Total flux subtracted in 200 components = -6.97651e-06 Jy ! Clean residual min=-0.002233 max=0.002150 Jy/beam ! Clean residual mean=-0.000005 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0851156 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.0851156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069265Jy sigma=0.416462 ! Fit after self-cal, rms=0.069269Jy sigma=0.416456 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069269Jy sigma=0.416456 ! Fit after self-cal, rms=0.069452Jy sigma=0.416444 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=6.191 mas, bpa=-5.896 degrees ! Estimated noise=1.33511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309011 Jy ! Component: 100 - total flux cleaned = 0.00034995 Jy ! Component: 150 - total flux cleaned = 0.000338694 Jy ! Component: 200 - total flux cleaned = 0.000338856 Jy ! Total flux subtracted in 200 components = 0.000338856 Jy ! Clean residual min=-0.002239 max=0.002128 Jy/beam ! Clean residual mean=-0.000005 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0854545 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0854545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069443Jy sigma=0.416419 ! Fit after self-cal, rms=0.069447Jy sigma=0.416414 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.66646e-05 Jy ! Component: 100 - total flux cleaned = 2.36254e-05 Jy ! Component: 150 - total flux cleaned = 2.69772e-06 Jy ! Component: 200 - total flux cleaned = 2.68545e-06 Jy ! Total flux subtracted in 200 components = 2.68545e-06 Jy ! Clean residual min=-0.002237 max=0.002137 Jy/beam ! Clean residual mean=-0.000005 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0854572 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.0854572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069440Jy sigma=0.416398 ! Fit after self-cal, rms=0.069443Jy sigma=0.416395 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069443Jy sigma=0.416395 ! Fit after self-cal, rms=0.069422Jy sigma=0.416387 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.658 mas, bmaj=9.929 mas, bpa=-2.296 degrees ! Estimated noise=1.54059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000399556 Jy ! Component: 100 - total flux cleaned = 0.000474901 Jy ! Component: 150 - total flux cleaned = 0.000481564 Jy ! Component: 200 - total flux cleaned = 0.000481285 Jy ! Total flux subtracted in 200 components = 0.000481285 Jy ! Clean residual min=-0.002333 max=0.002337 Jy/beam ! Clean residual mean=-0.000009 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.0859385 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 53 components and 0.0859385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069418Jy sigma=0.416388 ! Fit after self-cal, rms=0.069417Jy sigma=0.416382 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.5314e-06 Jy ! Component: 100 - total flux cleaned = 7.83634e-06 Jy ! Component: 150 - total flux cleaned = 7.84289e-06 Jy ! Component: 200 - total flux cleaned = 4.87129e-06 Jy ! Total flux subtracted in 200 components = 4.87129e-06 Jy ! Clean residual min=-0.002329 max=0.002330 Jy/beam ! Clean residual mean=-0.000009 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0859433 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 54 components and 0.0859433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069416Jy sigma=0.416390 ! Fit after self-cal, rms=0.069417Jy sigma=0.416387 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.466 mas, bmaj=6.177 mas, bpa=-5.823 degrees ! Estimated noise=1.33672 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.466 x 6.177 at -5.823 degrees (North through East) ! Clean map min=-0.0021363 max=0.080149 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=5.388 mas, bpa=-8.376 degrees ! Estimated noise=1.7504 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.061761 Jy ! Component: 100 - total flux cleaned = 0.0756246 Jy ! Component: 150 - total flux cleaned = 0.0808481 Jy ! Component: 200 - total flux cleaned = 0.0837242 Jy ! Total flux subtracted in 200 components = 0.0837242 Jy ! Clean residual min=-0.002684 max=0.002692 Jy/beam ! Clean residual mean=-0.000003 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.0837242 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0837242 Jy ! Inverting map and beam ! Estimated beam: bmin=3.466 mas, bmaj=6.177 mas, bpa=-5.823 degrees ! Estimated noise=1.33672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160248 Jy ! Component: 100 - total flux cleaned = 0.00188879 Jy ! Component: 150 - total flux cleaned = 0.00207496 Jy ! Component: 200 - total flux cleaned = 0.00210105 Jy ! Total flux subtracted in 200 components = 0.00210105 Jy ! Clean residual min=-0.002253 max=0.002112 Jy/beam ! Clean residual mean=-0.000004 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0858252 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.0858252 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.658 mas, bmaj=9.929 mas, bpa=-2.296 degrees ! Estimated noise=1.54059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128894 Jy ! Component: 100 - total flux cleaned = 0.000150483 Jy ! Component: 150 - total flux cleaned = 0.000159115 Jy ! Component: 200 - total flux cleaned = 0.000174017 Jy ! Total flux subtracted in 200 components = 0.000174017 Jy ! Clean residual min=-0.002337 max=0.002299 Jy/beam ! Clean residual mean=-0.000009 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0859993 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.69728e-06 Jy ! Component: 100 - total flux cleaned = -1.28619e-05 Jy ! Component: 150 - total flux cleaned = -1.28318e-05 Jy ! Component: 200 - total flux cleaned = -1.86359e-05 Jy ! Total flux subtracted in 200 components = -1.86359e-05 Jy ! Clean residual min=-0.002335 max=0.002305 Jy/beam ! Clean residual mean=-0.000009 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0859806 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.0859806 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.466 mas, bmaj=6.177 mas, bpa=-5.823 degrees ! Estimated noise=1.33672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.60012e-05 Jy ! Component: 100 - total flux cleaned = -0.000134334 Jy ! Component: 150 - total flux cleaned = -0.000176363 Jy ! Component: 200 - total flux cleaned = -0.000213336 Jy ! Total flux subtracted in 200 components = -0.000213336 Jy ! Clean residual min=-0.002225 max=0.002118 Jy/beam ! Clean residual mean=-0.000005 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0857673 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.0857673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069422Jy sigma=0.416398 ! Fit after self-cal, rms=0.069429Jy sigma=0.416387 wmodel J2204+3632_S_map.mod ! Writing 45 model components to file: J2204+3632_S_map.mod wobs J2204+3632_S_uvs.fits ! Writing UV FITS file: J2204+3632_S_uvs.fits wwins J2204+3632_S_map.win ! wwins: Wrote 1 windows to J2204+3632_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222585 Jy ! Component: 100 - total flux cleaned = 0.000622401 Jy ! Component: 150 - total flux cleaned = 0.00112545 Jy ! Component: 200 - total flux cleaned = 0.00134608 Jy ! Component: 250 - total flux cleaned = 0.001466 Jy ! Component: 300 - total flux cleaned = 0.00158212 Jy ! Component: 350 - total flux cleaned = 0.00163949 Jy ! Component: 400 - total flux cleaned = 0.00182881 Jy ! Component: 450 - total flux cleaned = 0.00198592 Jy ! Component: 500 - total flux cleaned = 0.00221657 Jy ! Component: 550 - total flux cleaned = 0.00246674 Jy ! Component: 600 - total flux cleaned = 0.00254018 Jy ! Component: 650 - total flux cleaned = 0.00258854 Jy ! Component: 700 - total flux cleaned = 0.00270634 Jy ! Component: 750 - total flux cleaned = 0.00272907 Jy ! Component: 800 - total flux cleaned = 0.0027291 Jy ! Component: 850 - total flux cleaned = 0.00286383 Jy ! Component: 900 - total flux cleaned = 0.00288582 Jy ! Component: 950 - total flux cleaned = 0.00297225 Jy ! Component: 1000 - total flux cleaned = 0.00303639 Jy ! Component: 1050 - total flux cleaned = 0.0031625 Jy ! Component: 1100 - total flux cleaned = 0.00324509 Jy ! Component: 1150 - total flux cleaned = 0.00328578 Jy ! Component: 1200 - total flux cleaned = 0.00338627 Jy ! Component: 1250 - total flux cleaned = 0.00344611 Jy ! Component: 1300 - total flux cleaned = 0.00348551 Jy ! Component: 1350 - total flux cleaned = 0.00360165 Jy ! Component: 1400 - total flux cleaned = 0.00373515 Jy ! Component: 1450 - total flux cleaned = 0.00375401 Jy ! Component: 1500 - total flux cleaned = 0.00386586 Jy ! Component: 1550 - total flux cleaned = 0.00392082 Jy ! Component: 1600 - total flux cleaned = 0.00402969 Jy ! Component: 1650 - total flux cleaned = 0.00408322 Jy ! Component: 1700 - total flux cleaned = 0.00413661 Jy ! Component: 1750 - total flux cleaned = 0.00420695 Jy ! Component: 1800 - total flux cleaned = 0.00429401 Jy ! Component: 1850 - total flux cleaned = 0.00432836 Jy ! Component: 1900 - total flux cleaned = 0.00437947 Jy ! Component: 1950 - total flux cleaned = 0.00443011 Jy ! Component: 2000 - total flux cleaned = 0.00448018 Jy ! Component: 2050 - total flux cleaned = 0.00452988 Jy ! Component: 2100 - total flux cleaned = 0.00454627 Jy ! Component: 2150 - total flux cleaned = 0.00459517 Jy ! Component: 2200 - total flux cleaned = 0.00467551 Jy ! Component: 2250 - total flux cleaned = 0.00473902 Jy ! Component: 2300 - total flux cleaned = 0.00475463 Jy ! Component: 2350 - total flux cleaned = 0.00480134 Jy ! Component: 2400 - total flux cleaned = 0.00484793 Jy ! Component: 2450 - total flux cleaned = 0.0048634 Jy ! Component: 2500 - total flux cleaned = 0.00492443 Jy ! Component: 2550 - total flux cleaned = 0.0049396 Jy ! Component: 2600 - total flux cleaned = 0.0049696 Jy ! Component: 2650 - total flux cleaned = 0.00498457 Jy ! Component: 2700 - total flux cleaned = 0.00499943 Jy ! Component: 2750 - total flux cleaned = 0.00502875 Jy ! Component: 2800 - total flux cleaned = 0.00508698 Jy ! Component: 2850 - total flux cleaned = 0.00511571 Jy ! Component: 2900 - total flux cleaned = 0.00515852 Jy ! Component: 2950 - total flux cleaned = 0.00518699 Jy ! Component: 3000 - total flux cleaned = 0.00522943 Jy ! Component: 3050 - total flux cleaned = 0.00527148 Jy ! Component: 3100 - total flux cleaned = 0.00535498 Jy ! Component: 3150 - total flux cleaned = 0.00539629 Jy ! Component: 3200 - total flux cleaned = 0.0054374 Jy ! Component: 3250 - total flux cleaned = 0.00545094 Jy ! Component: 3300 - total flux cleaned = 0.00551856 Jy ! Component: 3350 - total flux cleaned = 0.00555878 Jy ! Component: 3400 - total flux cleaned = 0.0056386 Jy ! Component: 3450 - total flux cleaned = 0.00565189 Jy ! Component: 3500 - total flux cleaned = 0.00567826 Jy ! Component: 3550 - total flux cleaned = 0.00573053 Jy ! Component: 3600 - total flux cleaned = 0.00578237 Jy ! Component: 3650 - total flux cleaned = 0.00579515 Jy ! Component: 3700 - total flux cleaned = 0.00587197 Jy ! Component: 3750 - total flux cleaned = 0.00587195 Jy ! Component: 3800 - total flux cleaned = 0.0059477 Jy ! Component: 3850 - total flux cleaned = 0.00596022 Jy ! Component: 3900 - total flux cleaned = 0.00603518 Jy ! Component: 3950 - total flux cleaned = 0.00606002 Jy ! Component: 4000 - total flux cleaned = 0.00610932 Jy ! Component: 4050 - total flux cleaned = 0.00614612 Jy ! Total flux subtracted in 4096 components = 0.00617057 Jy ! Clean residual min=-0.000794 max=0.000883 Jy/beam ! Clean residual mean=0.000000 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.0919378 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 282 components and 0.0919378 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2204+3632_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.466 x 6.177 at -5.823 degrees (North through East) ! Clean map min=-0.0014616 max=0.080041 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2204+3632_S_map.fits wmodel /image_prod/ug002_uva//J2204+3632_S_map.mod ! Writing 282 model components to file: /image_prod/ug002_uva//J2204+3632_S_map.mod wobs /image_prod/ug002_uva//J2204+3632_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2204+3632_S_uvs.fits wwins /image_prod/ug002_uva//J2204+3632_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J2204+3632_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0800407 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204198 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.765352 0.765352 1.5307 3.06141 6.12281 12.2456 24.4913 48.9825 97.965 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.08 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 391.976 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2204+3632_S_dfm.log closed on Thu Mar 5 05:28:05 2020