! Started logfile: /image_prod/ug002_uva//J2203+6750_X_dfm.log on Thu Mar 5 05:27:43 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2203+6750_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2203+6750_X_uva.fits ! AN table 1: 20 integrations on 28 of 28 possible baselines. ! AN table 2: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.912132 visibilities/baseline/integration-bin. ! Found source: J2203+6750 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 29772 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2203+6750_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.008948Jy sigma=9.100824 ! Fit after self-cal, rms=0.873373Jy sigma=7.871821 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7176 mas, bmaj=0.8544 mas, bpa=-9.33 degrees ! Estimated noise=0.97407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0957836 Jy ! Component: 100 - total flux cleaned = 0.117823 Jy ! Total flux subtracted in 100 components = 0.117823 Jy ! Clean residual min=-0.004194 max=0.010246 Jy/beam ! Clean residual mean=0.000004 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.117823 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.117823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058800Jy sigma=0.505869 ! Fit after self-cal, rms=0.058778Jy sigma=0.505695 ! Inverting map ! Added new window around map position (0.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106573 Jy ! Component: 100 - total flux cleaned = 0.0163316 Jy ! Total flux subtracted in 100 components = 0.0163316 Jy ! Clean residual min=-0.003512 max=0.004778 Jy/beam ! Clean residual mean=0.000002 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.134155 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.134155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055999Jy sigma=0.477129 ! Fit after self-cal, rms=0.055876Jy sigma=0.476241 ! Inverting map ! Added new window around map position (0.8, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509066 Jy ! Component: 100 - total flux cleaned = 0.00856297 Jy ! Total flux subtracted in 100 components = 0.00856297 Jy ! Clean residual min=-0.002948 max=0.003680 Jy/beam ! Clean residual mean=0.000002 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.142718 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.142718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055147Jy sigma=0.468529 ! Fit after self-cal, rms=0.055103Jy sigma=0.468165 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9566 mas, bmaj=1.115 mas, bpa=-3.965 degrees ! Estimated noise=0.461852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499319 Jy ! Component: 100 - total flux cleaned = 0.00806847 Jy ! Component: 150 - total flux cleaned = 0.0101717 Jy ! Component: 200 - total flux cleaned = 0.0116354 Jy ! Total flux subtracted in 200 components = 0.0116354 Jy ! Clean residual min=-0.002313 max=0.002622 Jy/beam ! Clean residual mean=0.000003 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.154353 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.154353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054618Jy sigma=0.463166 ! Fit after self-cal, rms=0.054586Jy sigma=0.462842 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9566 x 1.115 at -3.965 degrees (North through East) ! Clean map min=-0.0020335 max=0.12605 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.86 KP 1.03 LA 1.04 ! MK 1.01 NL 1.18 OV 0.88 SC 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.06 HN 0.98 KP 1.07 ! LA 1.03 MK 1.03 OV 0.93 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.89 KP 1.06 LA 1.03 ! MK 0.98 NL 1.11 OV 0.92 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.04 HN 0.95 KP 1.09 ! LA 1.04 MK 1.07 OV 0.92 PT 0.93 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.91 KP 1.04 LA 1.04 ! MK 1.02 NL 1.16 OV 0.91 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 HN 0.94 KP 1.06 ! LA 1.04 MK 1.04 OV 0.94 PT 0.94 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.90 KP 1.06 LA 1.01 ! MK 0.99 NL 1.21 OV 0.91 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.04 HN 0.96 KP 1.05 ! LA 1.01 MK 1.04 OV 0.93 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.89 KP 1.00 LA 0.98 ! MK 0.99 NL 1.22 OV 0.92 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.05 HN 0.94 KP 1.06 ! LA 1.02 MK 1.07 OV 0.93 PT 0.89 ! SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.93 KP 1.05 LA 1.00 ! MK 1.02 NL 1.14 OV 0.86 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.05 HN 1.01 KP 1.04 ! LA 1.02 MK 1.05 OV 0.92 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.92 KP 1.02 LA 1.03 ! MK 1.00 NL 1.09 OV 0.92 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.04 HN 0.95 KP 1.05 ! LA 1.02 MK 1.07 OV 0.92 PT 0.94 ! SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.91 KP 1.02 LA 1.03 ! MK 1.00 NL 1.18 OV 0.91 SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.06 HN 0.97 KP 1.06 ! LA 1.03 MK 1.06 OV 0.92 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.89 KP 1.04 LA 1.02 ! MK 0.95 NL 1.18 OV 0.91 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 HN 0.99 KP 1.05 ! LA 1.00 MK 1.08 OV 0.94 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.90 KP 1.03 LA 1.07 ! MK 0.96 NL 1.19 OV 0.91 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.08 HN 0.99 KP 1.02 ! LA 1.01 MK 1.05 OV 0.93 PT 0.91 ! SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.91 KP 1.01 LA 1.00 ! MK 1.09 NL 1.17 OV 0.93 SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.04 HN 0.96 KP 1.05 ! LA 1.05 MK 1.04 OV 0.94 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.99 KP 1.00 LA 1.03 ! MK 1.03 NL 1.11 OV 0.92 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.06 HN 0.99 KP 1.05 ! LA 1.06 MK 1.11 OV 0.90 PT 0.88 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.054586Jy sigma=0.462842 ! Fit after self-cal, rms=0.053275Jy sigma=0.453225 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9616 mas, bmaj=1.119 mas, bpa=-3.774 degrees ! Estimated noise=0.45966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000602104 Jy ! Component: 100 - total flux cleaned = 0.000644468 Jy ! Component: 150 - total flux cleaned = 0.000660769 Jy ! Component: 200 - total flux cleaned = 0.000674633 Jy ! Total flux subtracted in 200 components = 0.000674633 Jy ! Clean residual min=-0.001065 max=0.001070 Jy/beam ! Clean residual mean=-0.000004 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.155028 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.155028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053259Jy sigma=0.453074 ! Fit after self-cal, rms=0.053278Jy sigma=0.452948 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053278Jy sigma=0.452948 ! Fit after self-cal, rms=0.053197Jy sigma=0.451699 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9603 mas, bmaj=1.119 mas, bpa=-3.785 degrees ! Estimated noise=0.459704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303475 Jy ! Component: 100 - total flux cleaned = 0.000320425 Jy ! Component: 150 - total flux cleaned = 0.000347154 Jy ! Component: 200 - total flux cleaned = 0.000369715 Jy ! Total flux subtracted in 200 components = 0.000369715 Jy ! Clean residual min=-0.000886 max=0.000936 Jy/beam ! Clean residual mean=0.000001 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.155398 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.155398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053188Jy sigma=0.451623 ! Fit after self-cal, rms=0.053187Jy sigma=0.451602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (47, 15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000629832 Jy ! Component: 100 - total flux cleaned = 0.000682154 Jy ! Component: 150 - total flux cleaned = 0.00072407 Jy ! Component: 200 - total flux cleaned = 0.000748779 Jy ! Total flux subtracted in 200 components = 0.000748779 Jy ! Clean residual min=-0.000866 max=0.000886 Jy/beam ! Clean residual mean=0.000000 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.156147 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.156147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053173Jy sigma=0.451483 ! Fit after self-cal, rms=0.053172Jy sigma=0.451475 ! Inverting map ! Added new window around map position (-27.2, 46.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000653377 Jy ! Component: 100 - total flux cleaned = 0.000652614 Jy ! Component: 150 - total flux cleaned = 0.000651648 Jy ! Component: 200 - total flux cleaned = 0.000635932 Jy ! Total flux subtracted in 200 components = 0.000635932 Jy ! Clean residual min=-0.000813 max=0.000820 Jy/beam ! Clean residual mean=0.000000 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.156782 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.156783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053154Jy sigma=0.451326 ! Fit after self-cal, rms=0.053153Jy sigma=0.451318 ! Inverting map ! Added new window around map position (7.4, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415461 Jy ! Component: 100 - total flux cleaned = 0.000541349 Jy ! Component: 150 - total flux cleaned = 0.000631903 Jy ! Component: 200 - total flux cleaned = 0.000701011 Jy ! Total flux subtracted in 200 components = 0.000701011 Jy ! Clean residual min=-0.000764 max=0.000767 Jy/beam ! Clean residual mean=-0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.157484 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 94 components and 0.157484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053139Jy sigma=0.451204 ! Fit after self-cal, rms=0.053139Jy sigma=0.451199 ! Inverting map ! Added new window around map position (-17.8, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151179 Jy ! Component: 100 - total flux cleaned = 0.000209759 Jy ! Component: 150 - total flux cleaned = 0.000286327 Jy ! Component: 200 - total flux cleaned = 0.00034103 Jy ! Total flux subtracted in 200 components = 0.00034103 Jy ! Clean residual min=-0.000752 max=0.000711 Jy/beam ! Clean residual mean=-0.000000 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.157825 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 106 components and 0.157825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053124Jy sigma=0.451074 ! Fit after self-cal, rms=0.053123Jy sigma=0.451069 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053123Jy sigma=0.451069 ! Fit after self-cal, rms=0.053116Jy sigma=0.451043 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9604 mas, bmaj=1.119 mas, bpa=-3.8 degrees ! Estimated noise=0.459589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146261 Jy ! Component: 100 - total flux cleaned = 0.000214275 Jy ! Component: 150 - total flux cleaned = 0.000278707 Jy ! Component: 200 - total flux cleaned = 0.000339317 Jy ! Total flux subtracted in 200 components = 0.000339317 Jy ! Clean residual min=-0.000735 max=0.000733 Jy/beam ! Clean residual mean=0.000000 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.158164 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 107 components and 0.158164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053110Jy sigma=0.450992 ! Fit after self-cal, rms=0.053110Jy sigma=0.450990 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267313 Jy ! Component: 100 - total flux cleaned = 0.000243346 Jy ! Component: 150 - total flux cleaned = 0.00038641 Jy ! Component: 200 - total flux cleaned = 0.000471345 Jy ! Total flux subtracted in 200 components = 0.000471345 Jy ! Clean residual min=-0.000740 max=0.000682 Jy/beam ! Clean residual mean=0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.158635 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 116 components and 0.158635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053099Jy sigma=0.450900 ! Fit after self-cal, rms=0.053098Jy sigma=0.450897 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053098Jy sigma=0.450897 ! Fit after self-cal, rms=0.053093Jy sigma=0.450891 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.305 mas, bmaj=2.597 mas, bpa=65.44 degrees ! Estimated noise=0.614023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00042274 Jy ! Component: 100 - total flux cleaned = 0.000661022 Jy ! Component: 150 - total flux cleaned = 0.000783623 Jy ! Component: 200 - total flux cleaned = 0.000903876 Jy ! Total flux subtracted in 200 components = 0.000903876 Jy ! Clean residual min=-0.000748 max=0.000688 Jy/beam ! Clean residual mean=-0.000000 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.159539 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 132 components and 0.159539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053092Jy sigma=0.450879 ! Fit after self-cal, rms=0.053092Jy sigma=0.450877 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010604 Jy ! Component: 100 - total flux cleaned = 0.000195245 Jy ! Component: 150 - total flux cleaned = 0.000270505 Jy ! Component: 200 - total flux cleaned = 0.000341234 Jy ! Total flux subtracted in 200 components = 0.000341234 Jy ! Clean residual min=-0.000759 max=0.000673 Jy/beam ! Clean residual mean=-0.000001 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.15988 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 137 components and 0.15988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053091Jy sigma=0.450872 ! Fit after self-cal, rms=0.053091Jy sigma=0.450872 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9605 mas, bmaj=1.119 mas, bpa=-3.71 degrees ! Estimated noise=0.459518 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9605 x 1.119 at -3.71 degrees (North through East) ! Clean map min=-0.00069175 max=0.12532 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7224 mas, bmaj=0.8563 mas, bpa=-8.987 degrees ! Estimated noise=0.973413 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0954621 Jy ! Component: 100 - total flux cleaned = 0.118821 Jy ! Component: 150 - total flux cleaned = 0.129769 Jy ! Component: 200 - total flux cleaned = 0.136255 Jy ! Total flux subtracted in 200 components = 0.136255 Jy ! Clean residual min=-0.002438 max=0.003495 Jy/beam ! Clean residual mean=0.000002 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.136255 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.136255 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9605 mas, bmaj=1.119 mas, bpa=-3.71 degrees ! Estimated noise=0.459518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689266 Jy ! Component: 100 - total flux cleaned = 0.0108521 Jy ! Component: 150 - total flux cleaned = 0.0134618 Jy ! Component: 200 - total flux cleaned = 0.0152503 Jy ! Total flux subtracted in 200 components = 0.0152503 Jy ! Clean residual min=-0.000940 max=0.001099 Jy/beam ! Clean residual mean=0.000004 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.151505 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 36 components and 0.151505 Jy ! Inverting map ! Added new window around map position (1, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134914 Jy ! Component: 100 - total flux cleaned = 0.00227456 Jy ! Component: 150 - total flux cleaned = 0.00311892 Jy ! Component: 200 - total flux cleaned = 0.00387204 Jy ! Total flux subtracted in 200 components = 0.00387204 Jy ! Clean residual min=-0.000855 max=0.000846 Jy/beam ! Clean residual mean=0.000002 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.155377 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 55 components and 0.155377 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.305 mas, bmaj=2.597 mas, bpa=65.44 degrees ! Estimated noise=0.614023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129966 Jy ! Component: 100 - total flux cleaned = 0.0021212 Jy ! Component: 150 - total flux cleaned = 0.00269147 Jy ! Component: 200 - total flux cleaned = 0.00310177 Jy ! Total flux subtracted in 200 components = 0.00310177 Jy ! Clean residual min=-0.000808 max=0.000724 Jy/beam ! Clean residual mean=0.000001 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.158479 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265101 Jy ! Component: 100 - total flux cleaned = 0.000472628 Jy ! Component: 150 - total flux cleaned = 0.000704204 Jy ! Component: 200 - total flux cleaned = 0.000888674 Jy ! Total flux subtracted in 200 components = 0.000888674 Jy ! Clean residual min=-0.000741 max=0.000676 Jy/beam ! Clean residual mean=-0.000000 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.159367 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 94 components and 0.159367 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9605 mas, bmaj=1.119 mas, bpa=-3.71 degrees ! Estimated noise=0.459518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030234 Jy ! Component: 100 - total flux cleaned = 0.000352528 Jy ! Component: 150 - total flux cleaned = 0.000375577 Jy ! Component: 200 - total flux cleaned = 0.000314008 Jy ! Total flux subtracted in 200 components = 0.000314008 Jy ! Clean residual min=-0.000778 max=0.000686 Jy/beam ! Clean residual mean=-0.000000 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.159681 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 111 components and 0.159681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053113Jy sigma=0.451050 ! Fit after self-cal, rms=0.053109Jy sigma=0.451025 wmodel J2203+6750_X_map.mod ! Writing 111 model components to file: J2203+6750_X_map.mod wobs J2203+6750_X_uvs.fits ! Writing UV FITS file: J2203+6750_X_uvs.fits wwins J2203+6750_X_map.win ! wwins: Wrote 9 windows to J2203+6750_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000264228 Jy ! Component: 100 - total flux cleaned = -0.000520245 Jy ! Component: 150 - total flux cleaned = -0.000729023 Jy ! Component: 200 - total flux cleaned = -0.000908156 Jy ! Component: 250 - total flux cleaned = -0.00108266 Jy ! Component: 300 - total flux cleaned = -0.00116256 Jy ! Component: 350 - total flux cleaned = -0.00126315 Jy ! Component: 400 - total flux cleaned = -0.0012962 Jy ! Component: 450 - total flux cleaned = -0.00130712 Jy ! Component: 500 - total flux cleaned = -0.0013177 Jy ! Component: 550 - total flux cleaned = -0.00129657 Jy ! Component: 600 - total flux cleaned = -0.00127579 Jy ! Component: 650 - total flux cleaned = -0.00122458 Jy ! Component: 700 - total flux cleaned = -0.00123478 Jy ! Component: 750 - total flux cleaned = -0.00124484 Jy ! Component: 800 - total flux cleaned = -0.00126457 Jy ! Component: 850 - total flux cleaned = -0.00128398 Jy ! Component: 900 - total flux cleaned = -0.00126452 Jy ! Component: 950 - total flux cleaned = -0.00127421 Jy ! Component: 1000 - total flux cleaned = -0.0012742 Jy ! Component: 1050 - total flux cleaned = -0.00127412 Jy ! Component: 1100 - total flux cleaned = -0.00125566 Jy ! Component: 1150 - total flux cleaned = -0.00124652 Jy ! Component: 1200 - total flux cleaned = -0.00126491 Jy ! Component: 1250 - total flux cleaned = -0.00121951 Jy ! Component: 1300 - total flux cleaned = -0.0012105 Jy ! Component: 1350 - total flux cleaned = -0.00124617 Jy ! Component: 1400 - total flux cleaned = -0.0012106 Jy ! Component: 1450 - total flux cleaned = -0.00118413 Jy ! Component: 1500 - total flux cleaned = -0.00113176 Jy ! Component: 1550 - total flux cleaned = -0.00118388 Jy ! Component: 1600 - total flux cleaned = -0.00116664 Jy ! Component: 1650 - total flux cleaned = -0.00114087 Jy ! Component: 1700 - total flux cleaned = -0.00114946 Jy ! Component: 1750 - total flux cleaned = -0.00117492 Jy ! Component: 1800 - total flux cleaned = -0.00114113 Jy ! Component: 1850 - total flux cleaned = -0.00116633 Jy ! Component: 1900 - total flux cleaned = -0.00115795 Jy ! Component: 1950 - total flux cleaned = -0.00114968 Jy ! Component: 2000 - total flux cleaned = -0.00117442 Jy ! Component: 2050 - total flux cleaned = -0.00110881 Jy ! Component: 2100 - total flux cleaned = -0.00113329 Jy ! Component: 2150 - total flux cleaned = -0.00114146 Jy ! Component: 2200 - total flux cleaned = -0.0011253 Jy ! Component: 2250 - total flux cleaned = -0.00110924 Jy ! Component: 2300 - total flux cleaned = -0.00113321 Jy ! Component: 2350 - total flux cleaned = -0.00108556 Jy ! Component: 2400 - total flux cleaned = -0.00113294 Jy ! Component: 2450 - total flux cleaned = -0.00110941 Jy ! Component: 2500 - total flux cleaned = -0.00108594 Jy ! Component: 2550 - total flux cleaned = -0.0010859 Jy ! Component: 2600 - total flux cleaned = -0.00109369 Jy ! Component: 2650 - total flux cleaned = -0.00105509 Jy ! Component: 2700 - total flux cleaned = -0.00104749 Jy ! Component: 2750 - total flux cleaned = -0.00104748 Jy ! Component: 2800 - total flux cleaned = -0.00107023 Jy ! Component: 2850 - total flux cleaned = -0.00101738 Jy ! Component: 2900 - total flux cleaned = -0.00103997 Jy ! Component: 2950 - total flux cleaned = -0.0010175 Jy ! Component: 3000 - total flux cleaned = -0.00101748 Jy ! Component: 3050 - total flux cleaned = -0.00102493 Jy ! Component: 3100 - total flux cleaned = -0.000995392 Jy ! Component: 3150 - total flux cleaned = -0.000980697 Jy ! Component: 3200 - total flux cleaned = -0.000980714 Jy ! Component: 3250 - total flux cleaned = -0.000944275 Jy ! Component: 3300 - total flux cleaned = -0.000980568 Jy ! Component: 3350 - total flux cleaned = -0.00098061 Jy ! Component: 3400 - total flux cleaned = -0.000973383 Jy ! Component: 3450 - total flux cleaned = -0.000966282 Jy ! Component: 3500 - total flux cleaned = -0.00095911 Jy ! Component: 3550 - total flux cleaned = -0.000916477 Jy ! Component: 3600 - total flux cleaned = -0.000958943 Jy ! Component: 3650 - total flux cleaned = -0.000973043 Jy ! Component: 3700 - total flux cleaned = -0.000958999 Jy ! Component: 3750 - total flux cleaned = -0.000923996 Jy ! Component: 3800 - total flux cleaned = -0.000937968 Jy ! Component: 3850 - total flux cleaned = -0.000924098 Jy ! Component: 3900 - total flux cleaned = -0.000965648 Jy ! Component: 3950 - total flux cleaned = -0.000938043 Jy ! Component: 4000 - total flux cleaned = -0.000931178 Jy ! Component: 4050 - total flux cleaned = -0.000924274 Jy ! Total flux subtracted in 4096 components = -0.000951527 Jy ! Clean residual min=-0.000447 max=0.000390 Jy/beam ! Clean residual mean=-0.000000 rms=0.000112 Jy/beam ! Combined flux in latest and established models = 0.15873 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 434 components and 0.15873 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2203+6750_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9605 x 1.119 at -3.71 degrees (North through East) ! Clean map min=-0.00071999 max=0.1252 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2203+6750_X_map.fits wmodel /image_prod/ug002_uva//J2203+6750_X_map.mod ! Writing 434 model components to file: /image_prod/ug002_uva//J2203+6750_X_map.mod wobs /image_prod/ug002_uva//J2203+6750_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2203+6750_X_uvs.fits wwins /image_prod/ug002_uva//J2203+6750_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J2203+6750_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.125204 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000112225 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.268903 0.268903 0.537806 1.07561 2.15123 4.30245 8.6049 17.2098 34.4196 68.8392 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.125 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1115.64 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2203+6750_X_dfm.log closed on Thu Mar 5 05:27:49 2020