! Started logfile: /image_prod/ug002_uva//J2203+1725_X_dfm.log on Thu Mar 5 05:27:31 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2203+1725_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2203+1725_X_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.895926 visibilities/baseline/integration-bin. ! Found source: J2203+1725 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 29028 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2203+1725_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.319080Jy sigma=7.801031 ! Fit after self-cal, rms=0.270016Jy sigma=1.595491 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7395 mas, bmaj=2.87 mas, bpa=-17.7 degrees ! Estimated noise=1.29827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.596026 Jy ! Component: 100 - total flux cleaned = 0.788885 Jy ! Total flux subtracted in 100 components = 0.788885 Jy ! Clean residual min=-0.051162 max=0.085833 Jy/beam ! Clean residual mean=-0.000020 rms=0.009718 Jy/beam ! Combined flux in latest and established models = 0.788884 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.788884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.199674Jy sigma=1.154866 ! Fit after self-cal, rms=0.199658Jy sigma=1.154722 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0912525 Jy ! Component: 100 - total flux cleaned = 0.109962 Jy ! Total flux subtracted in 100 components = 0.109962 Jy ! Clean residual min=-0.045755 max=0.063545 Jy/beam ! Clean residual mean=-0.000009 rms=0.007531 Jy/beam ! Combined flux in latest and established models = 0.898846 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.898846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.148812Jy sigma=0.856637 ! Fit after self-cal, rms=0.148786Jy sigma=0.856457 ! Inverting map ! Added new window around map position (2, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179433 Jy ! Component: 100 - total flux cleaned = 0.0112138 Jy ! Total flux subtracted in 100 components = 0.0112138 Jy ! Clean residual min=-0.039880 max=0.053621 Jy/beam ! Clean residual mean=-0.000008 rms=0.006333 Jy/beam ! Combined flux in latest and established models = 0.91006 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.91006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131226Jy sigma=0.751098 ! Fit after self-cal, rms=0.130075Jy sigma=0.744222 ! Inverting map ! Added new window around map position (-2, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141721 Jy ! Component: 100 - total flux cleaned = 0.0170719 Jy ! Total flux subtracted in 100 components = 0.0170719 Jy ! Clean residual min=-0.026647 max=0.034458 Jy/beam ! Clean residual mean=-0.000007 rms=0.005322 Jy/beam ! Combined flux in latest and established models = 0.927132 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.927132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.118144Jy sigma=0.672478 ! Fit after self-cal, rms=0.117641Jy sigma=0.669651 ! Inverting map ! Added new window around map position (-7.6, 4.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135218 Jy ! Component: 100 - total flux cleaned = 0.0102214 Jy ! Total flux subtracted in 100 components = 0.0102214 Jy ! Clean residual min=-0.022654 max=0.031280 Jy/beam ! Clean residual mean=-0.000005 rms=0.004764 Jy/beam ! Combined flux in latest and established models = 0.937354 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.937354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112168Jy sigma=0.637103 ! Fit after self-cal, rms=0.111609Jy sigma=0.633678 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9759 mas, bmaj=2.922 mas, bpa=-16.21 degrees ! Estimated noise=0.717706 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00815111 Jy ! Component: 100 - total flux cleaned = 0.0101839 Jy ! Component: 150 - total flux cleaned = 0.0110593 Jy ! Component: 200 - total flux cleaned = 0.0118502 Jy ! Total flux subtracted in 200 components = 0.0118502 Jy ! Clean residual min=-0.018942 max=0.021786 Jy/beam ! Clean residual mean=-0.000003 rms=0.004229 Jy/beam ! Combined flux in latest and established models = 0.949204 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.949204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108028Jy sigma=0.609386 ! Fit after self-cal, rms=0.107920Jy sigma=0.608741 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9759 x 2.922 at -16.21 degrees (North through East) ! Clean map min=-0.02164 max=0.80631 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.96 KP 1.10 ! LA 1.02 MK 1.05 NL 1.05 OV 0.97 ! PT 0.93 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.97 KP 1.09 ! LA 1.03 MK 1.04 NL 1.03 OV 0.96 ! PT 0.94 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.98 KP 1.09 ! LA 1.01 MK 1.05 NL 1.04 OV 0.96 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.98 KP 1.10 ! LA 1.03 MK 1.05 NL 1.05 OV 0.96 ! PT 0.94 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.96 KP 1.09 ! LA 1.02 MK 1.02 NL 1.03 OV 0.97 ! PT 1.02 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.98 KP 1.09 ! LA 1.03 MK 1.02 NL 1.05 OV 0.96 ! PT 0.93 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.96 KP 1.09 ! LA 1.01 MK 1.02 NL 1.06 OV 0.94 ! PT 0.94 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.96 KP 1.08 ! LA 1.02 MK 1.01 NL 1.04 OV 0.96 ! PT 0.91 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.97 KP 1.05 ! LA 1.02 MK 1.00 NL 1.03 OV 0.95 ! PT 0.93 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.97 KP 1.08 ! LA 1.00 MK 1.00 NL 1.04 OV 0.95 ! PT 0.92 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.95 KP 1.11 ! LA 1.01 MK 1.01 NL 1.00 OV 0.95 ! PT 0.93 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.95 KP 1.07 ! LA 1.02 MK 1.05 NL 1.01 OV 0.94 ! PT 0.93 ! ! ! Fit before self-cal, rms=0.107920Jy sigma=0.608741 ! Fit after self-cal, rms=0.091902Jy sigma=0.518497 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9814 mas, bmaj=2.897 mas, bpa=-16.02 degrees ! Estimated noise=0.716242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483331 Jy ! Component: 100 - total flux cleaned = 0.00440647 Jy ! Component: 150 - total flux cleaned = 0.00399789 Jy ! Component: 200 - total flux cleaned = 0.00434577 Jy ! Total flux subtracted in 200 components = 0.00434577 Jy ! Clean residual min=-0.012883 max=0.012740 Jy/beam ! Clean residual mean=-0.000008 rms=0.002581 Jy/beam ! Combined flux in latest and established models = 0.95355 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.95355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087187Jy sigma=0.490457 ! Fit after self-cal, rms=0.087123Jy sigma=0.490010 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087123Jy sigma=0.490010 ! Fit after self-cal, rms=0.079954Jy sigma=0.435181 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9927 mas, bmaj=2.904 mas, bpa=-15.39 degrees ! Estimated noise=0.723026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159188 Jy ! Component: 100 - total flux cleaned = -0.000522397 Jy ! Component: 150 - total flux cleaned = 0.000434447 Jy ! Component: 200 - total flux cleaned = 0.000871206 Jy ! Total flux subtracted in 200 components = 0.000871206 Jy ! Clean residual min=-0.011291 max=0.008289 Jy/beam ! Clean residual mean=-0.000010 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.954421 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 0.954421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078432Jy sigma=0.425969 ! Fit after self-cal, rms=0.078424Jy sigma=0.425862 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405987 Jy ! Component: 100 - total flux cleaned = 0.000975276 Jy ! Component: 150 - total flux cleaned = 0.00166941 Jy ! Component: 200 - total flux cleaned = 0.00248348 Jy ! Total flux subtracted in 200 components = 0.00248348 Jy ! Clean residual min=-0.010796 max=0.008310 Jy/beam ! Clean residual mean=-0.000010 rms=0.001795 Jy/beam ! Combined flux in latest and established models = 0.956904 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 119 components and 0.956904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077717Jy sigma=0.421456 ! Fit after self-cal, rms=0.077706Jy sigma=0.421404 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077706Jy sigma=0.421404 ! Fit after self-cal, rms=0.078295Jy sigma=0.415969 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.997 mas, bmaj=2.905 mas, bpa=-15.15 degrees ! Estimated noise=0.724872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200996 Jy ! Component: 100 - total flux cleaned = -0.00248736 Jy ! Component: 150 - total flux cleaned = -0.00211964 Jy ! Component: 200 - total flux cleaned = -0.00159674 Jy ! Total flux subtracted in 200 components = -0.00159674 Jy ! Clean residual min=-0.010128 max=0.007174 Jy/beam ! Clean residual mean=-0.000009 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 0.955308 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 131 components and 0.955308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077146Jy sigma=0.410040 ! Fit after self-cal, rms=0.077139Jy sigma=0.409991 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.22975e-05 Jy ! Component: 100 - total flux cleaned = 0.000421366 Jy ! Component: 150 - total flux cleaned = 0.00115008 Jy ! Component: 200 - total flux cleaned = 0.001705 Jy ! Total flux subtracted in 200 components = 0.001705 Jy ! Clean residual min=-0.009808 max=0.006859 Jy/beam ! Clean residual mean=-0.000009 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.957013 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 140 components and 0.957013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076589Jy sigma=0.407115 ! Fit after self-cal, rms=0.076580Jy sigma=0.407086 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076580Jy sigma=0.407086 ! Fit after self-cal, rms=0.077064Jy sigma=0.405619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.184 mas, bmaj=3.122 mas, bpa=-5.658 degrees ! Estimated noise=0.872283 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029357 Jy ! Component: 100 - total flux cleaned = 0.00416979 Jy ! Component: 150 - total flux cleaned = 0.0049568 Jy ! Component: 200 - total flux cleaned = 0.00545091 Jy ! Total flux subtracted in 200 components = 0.00545091 Jy ! Clean residual min=-0.006746 max=0.006205 Jy/beam ! Clean residual mean=-0.000012 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.962464 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 149 components and 0.962464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076792Jy sigma=0.403516 ! Fit after self-cal, rms=0.076791Jy sigma=0.403469 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350071 Jy ! Component: 100 - total flux cleaned = 0.000667798 Jy ! Component: 150 - total flux cleaned = 0.000811836 Jy ! Component: 200 - total flux cleaned = 0.00107123 Jy ! Total flux subtracted in 200 components = 0.00107123 Jy ! Clean residual min=-0.006442 max=0.006100 Jy/beam ! Clean residual mean=-0.000011 rms=0.001590 Jy/beam ! Combined flux in latest and established models = 0.963535 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 162 components and 0.963535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076698Jy sigma=0.402954 ! Fit after self-cal, rms=0.076696Jy sigma=0.402932 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=2.901 mas, bpa=-15.03 degrees ! Estimated noise=0.725734 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.001 x 2.901 at -15.03 degrees (North through East) ! Clean map min=-0.0097048 max=0.8149 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076696Jy sigma=0.402932 ! Fit after self-cal, rms=0.072681Jy sigma=0.374091 ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=2.896 mas, bpa=-15.02 degrees ! Estimated noise=0.724704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017892 Jy ! Component: 100 - total flux cleaned = -0.00282661 Jy ! Component: 150 - total flux cleaned = -0.00298052 Jy ! Component: 200 - total flux cleaned = -0.00284855 Jy ! Total flux subtracted in 200 components = -0.00284855 Jy ! Clean residual min=-0.008856 max=0.006008 Jy/beam ! Clean residual mean=-0.000006 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 0.960686 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 169 components and 0.960686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071912Jy sigma=0.370262 ! Fit after self-cal, rms=0.071906Jy sigma=0.370228 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159123 Jy ! Component: 100 - total flux cleaned = -3.62024e-05 Jy ! Component: 150 - total flux cleaned = 8.04418e-05 Jy ! Component: 200 - total flux cleaned = 0.000192405 Jy ! Total flux subtracted in 200 components = 0.000192405 Jy ! Clean residual min=-0.008601 max=0.005825 Jy/beam ! Clean residual mean=-0.000006 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 0.960879 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 175 components and 0.960879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071531Jy sigma=0.368345 ! Fit after self-cal, rms=0.071525Jy sigma=0.368326 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071525Jy sigma=0.368326 ! Fit after self-cal, rms=0.071998Jy sigma=0.367404 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7616 mas, bmaj=2.848 mas, bpa=-16.45 degrees ! Estimated noise=1.34718 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.615349 Jy ! Component: 100 - total flux cleaned = 0.786784 Jy ! Component: 150 - total flux cleaned = 0.866611 Jy ! Component: 200 - total flux cleaned = 0.912362 Jy ! Total flux subtracted in 200 components = 0.912362 Jy ! Clean residual min=-0.020730 max=0.024117 Jy/beam ! Clean residual mean=-0.000007 rms=0.003526 Jy/beam ! Combined flux in latest and established models = 0.912362 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.912362 Jy ! Inverting map and beam ! Estimated beam: bmin=1.004 mas, bmaj=2.894 mas, bpa=-14.93 degrees ! Estimated noise=0.725417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319344 Jy ! Component: 100 - total flux cleaned = 0.0502053 Jy ! Component: 150 - total flux cleaned = 0.0502986 Jy ! Component: 200 - total flux cleaned = 0.0498976 Jy ! Total flux subtracted in 200 components = 0.0498976 Jy ! Clean residual min=-0.009593 max=0.010313 Jy/beam ! Clean residual mean=-0.000006 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 0.96226 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.96226 Jy ! Inverting map ! Added new window around map position (6.2, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627894 Jy ! Component: 100 - total flux cleaned = -0.00118029 Jy ! Component: 150 - total flux cleaned = -0.00182679 Jy ! Component: 200 - total flux cleaned = -0.00212413 Jy ! Total flux subtracted in 200 components = -0.00212413 Jy ! Clean residual min=-0.009763 max=0.009636 Jy/beam ! Clean residual mean=-0.000007 rms=0.001590 Jy/beam ! Combined flux in latest and established models = 0.960135 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 51 components and 0.960136 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.185 mas, bmaj=3.116 mas, bpa=-5.311 degrees ! Estimated noise=0.870637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011199 Jy ! Component: 100 - total flux cleaned = 0.00125848 Jy ! Component: 150 - total flux cleaned = 0.00101523 Jy ! Component: 200 - total flux cleaned = 0.00101494 Jy ! Total flux subtracted in 200 components = 0.00101494 Jy ! Clean residual min=-0.006547 max=0.006212 Jy/beam ! Clean residual mean=-0.000011 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 0.96115 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101281 Jy ! Component: 100 - total flux cleaned = -0.000192886 Jy ! Component: 150 - total flux cleaned = -0.000108059 Jy ! Component: 200 - total flux cleaned = -0.000189479 Jy ! Total flux subtracted in 200 components = -0.000189479 Jy ! Clean residual min=-0.006408 max=0.005665 Jy/beam ! Clean residual mean=-0.000010 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.960961 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 77 components and 0.960961 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.004 mas, bmaj=2.894 mas, bpa=-14.93 degrees ! Estimated noise=0.725417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00232624 Jy ! Component: 100 - total flux cleaned = -0.00307419 Jy ! Component: 150 - total flux cleaned = -0.00330725 Jy ! Component: 200 - total flux cleaned = -0.00374264 Jy ! Total flux subtracted in 200 components = -0.00374264 Jy ! Clean residual min=-0.009195 max=0.008222 Jy/beam ! Clean residual mean=-0.000006 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.957218 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 0.957218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074628Jy sigma=0.378034 ! Fit after self-cal, rms=0.074448Jy sigma=0.376842 wmodel J2203+1725_X_map.mod ! Writing 91 model components to file: J2203+1725_X_map.mod wobs J2203+1725_X_uvs.fits ! Writing UV FITS file: J2203+1725_X_uvs.fits wwins J2203+1725_X_map.win ! wwins: Wrote 6 windows to J2203+1725_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00238725 Jy ! Component: 100 - total flux cleaned = -0.00278473 Jy ! Component: 150 - total flux cleaned = -0.00314839 Jy ! Component: 200 - total flux cleaned = -0.0034957 Jy ! Component: 250 - total flux cleaned = -0.00394194 Jy ! Component: 300 - total flux cleaned = -0.00448333 Jy ! Component: 350 - total flux cleaned = -0.00521387 Jy ! Component: 400 - total flux cleaned = -0.00582256 Jy ! Component: 450 - total flux cleaned = -0.00631479 Jy ! Component: 500 - total flux cleaned = -0.00650839 Jy ! Component: 550 - total flux cleaned = -0.00707081 Jy ! Component: 600 - total flux cleaned = -0.0072553 Jy ! Component: 650 - total flux cleaned = -0.00752339 Jy ! Component: 700 - total flux cleaned = -0.00735055 Jy ! Component: 750 - total flux cleaned = -0.00735175 Jy ! Component: 800 - total flux cleaned = -0.00718362 Jy ! Component: 850 - total flux cleaned = -0.00685694 Jy ! Component: 900 - total flux cleaned = -0.00661617 Jy ! Component: 950 - total flux cleaned = -0.00630062 Jy ! Component: 1000 - total flux cleaned = -0.00622372 Jy ! Component: 1050 - total flux cleaned = -0.00591967 Jy ! Component: 1100 - total flux cleaned = -0.00599318 Jy ! Component: 1150 - total flux cleaned = -0.00569989 Jy ! Component: 1200 - total flux cleaned = -0.00555649 Jy ! Component: 1250 - total flux cleaned = -0.00555664 Jy ! Component: 1300 - total flux cleaned = -0.00541806 Jy ! Component: 1350 - total flux cleaned = -0.00521405 Jy ! Component: 1400 - total flux cleaned = -0.00494675 Jy ! Component: 1450 - total flux cleaned = -0.00481513 Jy ! Component: 1500 - total flux cleaned = -0.00449059 Jy ! Component: 1550 - total flux cleaned = -0.00417153 Jy ! Component: 1600 - total flux cleaned = -0.00385823 Jy ! Component: 1650 - total flux cleaned = -0.00373463 Jy ! Component: 1700 - total flux cleaned = -0.00349069 Jy ! Component: 1750 - total flux cleaned = -0.0031914 Jy ! Component: 1800 - total flux cleaned = -0.00272 Jy ! Component: 1850 - total flux cleaned = -0.00248804 Jy ! Component: 1900 - total flux cleaned = -0.0023159 Jy ! Component: 1950 - total flux cleaned = -0.00186462 Jy ! Component: 2000 - total flux cleaned = -0.0016413 Jy ! Component: 2050 - total flux cleaned = -0.00136762 Jy ! Component: 2100 - total flux cleaned = -0.00109738 Jy ! Component: 2150 - total flux cleaned = -0.000831025 Jy ! Component: 2200 - total flux cleaned = -0.00056866 Jy ! Component: 2250 - total flux cleaned = -0.00036026 Jy ! Component: 2300 - total flux cleaned = -5.47573e-05 Jy ! Component: 2350 - total flux cleaned = 0.000397999 Jy ! Component: 2400 - total flux cleaned = 0.000695508 Jy ! Component: 2450 - total flux cleaned = 0.000989659 Jy ! Component: 2500 - total flux cleaned = 0.00137611 Jy ! Component: 2550 - total flux cleaned = 0.00161548 Jy ! Component: 2600 - total flux cleaned = 0.00194516 Jy ! Component: 2650 - total flux cleaned = 0.00227156 Jy ! Component: 2700 - total flux cleaned = 0.00236359 Jy ! Component: 2750 - total flux cleaned = 0.00286314 Jy ! Component: 2800 - total flux cleaned = 0.00313177 Jy ! Component: 2850 - total flux cleaned = 0.0032649 Jy ! Component: 2900 - total flux cleaned = 0.00357196 Jy ! Component: 2950 - total flux cleaned = 0.00378857 Jy ! Component: 3000 - total flux cleaned = 0.00396024 Jy ! Component: 3050 - total flux cleaned = 0.0040455 Jy ! Component: 3100 - total flux cleaned = 0.00429687 Jy ! Component: 3150 - total flux cleaned = 0.00458626 Jy ! Component: 3200 - total flux cleaned = 0.00470869 Jy ! Component: 3250 - total flux cleaned = 0.00483054 Jy ! Component: 3300 - total flux cleaned = 0.00499052 Jy ! Component: 3350 - total flux cleaned = 0.00510933 Jy ! Component: 3400 - total flux cleaned = 0.00522708 Jy ! Component: 3450 - total flux cleaned = 0.00538233 Jy ! Component: 3500 - total flux cleaned = 0.0056113 Jy ! Component: 3550 - total flux cleaned = 0.00576151 Jy ! Component: 3600 - total flux cleaned = 0.00576162 Jy ! Component: 3650 - total flux cleaned = 0.00591028 Jy ! Component: 3700 - total flux cleaned = 0.00605732 Jy ! Component: 3750 - total flux cleaned = 0.00620215 Jy ! Component: 3800 - total flux cleaned = 0.00634545 Jy ! Component: 3850 - total flux cleaned = 0.00641628 Jy ! Component: 3900 - total flux cleaned = 0.00673187 Jy ! Component: 3950 - total flux cleaned = 0.00669735 Jy ! Component: 4000 - total flux cleaned = 0.0070057 Jy ! Component: 4050 - total flux cleaned = 0.00714119 Jy ! Total flux subtracted in 4096 components = 0.00717497 Jy ! Clean residual min=-0.001672 max=0.001672 Jy/beam ! Clean residual mean=-0.000001 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.964393 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 334 components and 0.964394 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2203+1725_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.004 x 2.894 at -14.93 degrees (North through East) ! Clean map min=-0.0071156 max=0.81855 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2203+1725_X_map.fits wmodel /image_prod/ug002_uva//J2203+1725_X_map.mod ! Writing 334 model components to file: /image_prod/ug002_uva//J2203+1725_X_map.mod wobs /image_prod/ug002_uva//J2203+1725_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2203+1725_X_uvs.fits wwins /image_prod/ug002_uva//J2203+1725_X_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uva//J2203+1725_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.81855 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000521297 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.191056 0.191056 0.382112 0.764224 1.52845 3.0569 6.11379 12.2276 24.4552 48.9104 97.8207 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.818 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1570.22 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2203+1725_X_dfm.log closed on Thu Mar 5 05:27:37 2020