! Started logfile: /image_prod/ug002_uva//J2203+1725_S_dfm.log on Thu Mar  5 05:27:25 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2203+1725_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2203+1725_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.895926 visibilities/baseline/integration-bin.
! Found source: J2203+1725
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7257 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2203+1725_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.173342Jy  sigma=8.095485
! Fit after  self-cal, rms=0.424588Jy  sigma=2.850734
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.232 mas, bmaj=10.98 mas, bpa=-16.94 degrees
! Estimated noise=1.93018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.452055 Jy
! Component: 100  -  total flux cleaned = 0.556228 Jy
! Total flux subtracted in 100 components = 0.556228 Jy
! Clean residual min=-0.016161 max=0.039222 Jy/beam
! Clean residual mean=0.000012 rms=0.005231 Jy/beam
! Combined flux in latest and established models = 0.556228 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.556228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114236Jy  sigma=0.743353
! Fit after  self-cal, rms=0.114216Jy  sigma=0.743154
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0419231 Jy
! Component: 100  -  total flux cleaned = 0.0666647 Jy
! Total flux subtracted in 100 components = 0.0666647 Jy
! Clean residual min=-0.011936 max=0.024642 Jy/beam
! Clean residual mean=0.000003 rms=0.003670 Jy/beam
! Combined flux in latest and established models = 0.622893 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 24 components and 0.622893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095380Jy  sigma=0.594564
! Fit after  self-cal, rms=0.095232Jy  sigma=0.593239
! Inverting map 
! Added new window around map position (7, 5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0226176 Jy
! Component: 100  -  total flux cleaned = 0.0360288 Jy
! Total flux subtracted in 100 components = 0.0360288 Jy
! Clean residual min=-0.009888 max=0.013859 Jy/beam
! Clean residual mean=0.000000 rms=0.003000 Jy/beam
! Combined flux in latest and established models = 0.658922 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.658922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089008Jy  sigma=0.535246
! Fit after  self-cal, rms=0.088533Jy  sigma=0.531686
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.811 mas, bmaj=11.84 mas, bpa=-16.17 degrees
! Estimated noise=1.25881 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0148846 Jy
! Component: 100  -  total flux cleaned = 0.0233183 Jy
! Component: 150  -  total flux cleaned = 0.0294795 Jy
! Component: 200  -  total flux cleaned = 0.0336467 Jy
! Total flux subtracted in 200 components = 0.0336467 Jy
! Clean residual min=-0.009010 max=0.011979 Jy/beam
! Clean residual mean=-0.000009 rms=0.002453 Jy/beam
! Combined flux in latest and established models = 0.692568 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 81 components and 0.692568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086242Jy  sigma=0.507164
! Fit after  self-cal, rms=0.086002Jy  sigma=0.505260
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.811 x 11.84 at -16.17 degrees (North through East)
! Clean map  min=-0.0097113  max=0.57879 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.97     KP        0.98     
!   LA        1.01     MK        1.01     NL        0.91     OV        0.95     
!   PT        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        0.99     KP        0.98     
!   LA        1.02     MK        0.99     NL        1.16     OV        1.00     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        0.98     
!   LA        1.02     MK        0.97     NL        1.07     OV        0.97     
!   PT        0.99     
! 
! 
! Fit before self-cal, rms=0.086002Jy  sigma=0.505260
! Fit after  self-cal, rms=0.080109Jy  sigma=0.447167
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.8 mas, bmaj=11.89 mas, bpa=-16.11 degrees
! Estimated noise=1.257 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00227125 Jy
! Component: 100  -  total flux cleaned = -0.00245497 Jy
! Component: 150  -  total flux cleaned = -0.00234108 Jy
! Component: 200  -  total flux cleaned = -0.00245064 Jy
! Total flux subtracted in 200 components = -0.00245064 Jy
! Clean residual min=-0.007780 max=0.007938 Jy/beam
! Clean residual mean=-0.000011 rms=0.001956 Jy/beam
! Combined flux in latest and established models = 0.690118 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 96 components and 0.690118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079474Jy  sigma=0.442955
! Fit after  self-cal, rms=0.079437Jy  sigma=0.442591
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079437Jy  sigma=0.442591
! Fit after  self-cal, rms=0.075843Jy  sigma=0.395344
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.809 mas, bmaj=11.91 mas, bpa=-15.94 degrees
! Estimated noise=1.26136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000767489 Jy
! Component: 100  -  total flux cleaned = 0.000653125 Jy
! Component: 150  -  total flux cleaned = 0.000659208 Jy
! Component: 200  -  total flux cleaned = 0.000577693 Jy
! Total flux subtracted in 200 components = 0.000577693 Jy
! Clean residual min=-0.004328 max=0.003683 Jy/beam
! Clean residual mean=-0.000009 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 0.690695 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 119 components and 0.690695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075454Jy  sigma=0.392593
! Fit after  self-cal, rms=0.075454Jy  sigma=0.392417
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000504648 Jy
! Component: 100  -  total flux cleaned = 0.000219753 Jy
! Component: 150  -  total flux cleaned = 9.49857e-05 Jy
! Component: 200  -  total flux cleaned = -1.39042e-05 Jy
! Total flux subtracted in 200 components = -1.39042e-05 Jy
! Clean residual min=-0.004162 max=0.003533 Jy/beam
! Clean residual mean=-0.000009 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.690681 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 132 components and 0.690681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075309Jy  sigma=0.391667
! Fit after  self-cal, rms=0.075301Jy  sigma=0.391615
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075301Jy  sigma=0.391615
! Fit after  self-cal, rms=0.075365Jy  sigma=0.388108
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.806 mas, bmaj=11.91 mas, bpa=-15.9 degrees
! Estimated noise=1.26048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000495268 Jy
! Component: 100  -  total flux cleaned = 0.000500094 Jy
! Component: 150  -  total flux cleaned = 0.000297401 Jy
! Component: 200  -  total flux cleaned = 0.000238955 Jy
! Total flux subtracted in 200 components = 0.000238955 Jy
! Clean residual min=-0.002800 max=0.003200 Jy/beam
! Clean residual mean=-0.000009 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.69092 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 143 components and 0.69092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075191Jy  sigma=0.387064
! Fit after  self-cal, rms=0.075186Jy  sigma=0.387019
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-35.5, 102).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027482 Jy
! Component: 100  -  total flux cleaned = 0.00325438 Jy
! Component: 150  -  total flux cleaned = 0.00330717 Jy
! Component: 200  -  total flux cleaned = 0.00330877 Jy
! Total flux subtracted in 200 components = 0.00330877 Jy
! Clean residual min=-0.002787 max=0.002899 Jy/beam
! Clean residual mean=-0.000008 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.694229 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 164 components and 0.694229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075032Jy  sigma=0.386112
! Fit after  self-cal, rms=0.075027Jy  sigma=0.386064
! Inverting map 
! Added new window around map position (21, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154131 Jy
! Component: 100  -  total flux cleaned = 0.00118229 Jy
! Component: 150  -  total flux cleaned = 0.000702906 Jy
! Component: 200  -  total flux cleaned = 0.0007001 Jy
! Total flux subtracted in 200 components = 0.0007001 Jy
! Clean residual min=-0.002573 max=0.002292 Jy/beam
! Clean residual mean=-0.000007 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.694929 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 179 components and 0.694929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074859Jy  sigma=0.385133
! Fit after  self-cal, rms=0.074851Jy  sigma=0.385087
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074851Jy  sigma=0.385087
! Fit after  self-cal, rms=0.074819Jy  sigma=0.384801
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.846 mas, bmaj=12.58 mas, bpa=-11.36 degrees
! Estimated noise=1.45902 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176455 Jy
! Component: 100  -  total flux cleaned = 0.0002508 Jy
! Component: 150  -  total flux cleaned = 0.000349926 Jy
! Component: 200  -  total flux cleaned = 0.000463388 Jy
! Total flux subtracted in 200 components = 0.000463388 Jy
! Clean residual min=-0.002171 max=0.001916 Jy/beam
! Clean residual mean=-0.000011 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.695393 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 196 components and 0.695393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074782Jy  sigma=0.384584
! Fit after  self-cal, rms=0.074777Jy  sigma=0.384568
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124699 Jy
! Component: 100  -  total flux cleaned = 0.000148814 Jy
! Component: 150  -  total flux cleaned = 0.000171029 Jy
! Component: 200  -  total flux cleaned = 0.000193434 Jy
! Total flux subtracted in 200 components = 0.000193434 Jy
! Clean residual min=-0.002126 max=0.001905 Jy/beam
! Clean residual mean=-0.000011 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.695586 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 205 components and 0.695586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074761Jy  sigma=0.384455
! Fit after  self-cal, rms=0.074759Jy  sigma=0.384450
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.805 mas, bmaj=11.92 mas, bpa=-15.87 degrees
! Estimated noise=1.2602 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.805 x 11.92 at -15.87 degrees (North through East)
! Clean map  min=-0.0023014  max=0.57748 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074759Jy  sigma=0.384450
! Fit after  self-cal, rms=0.069746Jy  sigma=0.341544
! Inverting map and beam 
! Estimated beam: bmin=3.806 mas, bmaj=11.91 mas, bpa=-15.87 degrees
! Estimated noise=1.26039 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000275486 Jy
! Component: 100  -  total flux cleaned = -0.000373409 Jy
! Component: 150  -  total flux cleaned = -0.00037407 Jy
! Component: 200  -  total flux cleaned = -0.000332989 Jy
! Total flux subtracted in 200 components = -0.000332989 Jy
! Clean residual min=-0.002335 max=0.002155 Jy/beam
! Clean residual mean=-0.000005 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.695253 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 220 components and 0.695253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069666Jy  sigma=0.341131
! Fit after  self-cal, rms=0.069664Jy  sigma=0.341124
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.60899e-05 Jy
! Component: 100  -  total flux cleaned = -4.71725e-05 Jy
! Component: 150  -  total flux cleaned = -1.02716e-05 Jy
! Component: 200  -  total flux cleaned = 9.47783e-05 Jy
! Total flux subtracted in 200 components = 9.47783e-05 Jy
! Clean residual min=-0.002336 max=0.002045 Jy/beam
! Clean residual mean=-0.000005 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.695348 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 235 components and 0.695348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069615Jy  sigma=0.340885
! Fit after  self-cal, rms=0.069614Jy  sigma=0.340882
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069614Jy  sigma=0.340882
! Fit after  self-cal, rms=0.069618Jy  sigma=0.340822
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.233 mas, bmaj=11.03 mas, bpa=-16.6 degrees
! Estimated noise=1.92808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.450097 Jy
! Component: 100  -  total flux cleaned = 0.55397 Jy
! Component: 150  -  total flux cleaned = 0.597012 Jy
! Component: 200  -  total flux cleaned = 0.62285 Jy
! Total flux subtracted in 200 components = 0.62285 Jy
! Clean residual min=-0.006136 max=0.013717 Jy/beam
! Clean residual mean=0.000002 rms=0.002043 Jy/beam
! Combined flux in latest and established models = 0.62285 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.62285 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.805 mas, bmaj=11.92 mas, bpa=-15.85 degrees
! Estimated noise=1.26004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223267 Jy
! Component: 100  -  total flux cleaned = 0.0356004 Jy
! Component: 150  -  total flux cleaned = 0.0444652 Jy
! Component: 200  -  total flux cleaned = 0.0507559 Jy
! Total flux subtracted in 200 components = 0.0507559 Jy
! Clean residual min=-0.002942 max=0.003733 Jy/beam
! Clean residual mean=-0.000009 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.673606 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 89 components and 0.673606 Jy
! Inverting map 
! Added new window around map position (-6.5, -7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00474121 Jy
! Component: 100  -  total flux cleaned = 0.00764282 Jy
! Component: 150  -  total flux cleaned = 0.00945981 Jy
! Component: 200  -  total flux cleaned = 0.0110498 Jy
! Total flux subtracted in 200 components = 0.0110498 Jy
! Clean residual min=-0.002268 max=0.002269 Jy/beam
! Clean residual mean=-0.000007 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.684656 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 130 components and 0.684656 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.844 mas, bmaj=12.58 mas, bpa=-11.34 degrees
! Estimated noise=1.45917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00316488 Jy
! Component: 100  -  total flux cleaned = 0.00459507 Jy
! Component: 150  -  total flux cleaned = 0.00545254 Jy
! Component: 200  -  total flux cleaned = 0.00575754 Jy
! Total flux subtracted in 200 components = 0.00575754 Jy
! Clean residual min=-0.002183 max=0.002019 Jy/beam
! Clean residual mean=-0.000011 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.690413 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267702 Jy
! Component: 100  -  total flux cleaned = 0.00046012 Jy
! Component: 150  -  total flux cleaned = 0.000761934 Jy
! Component: 200  -  total flux cleaned = 0.00095682 Jy
! Total flux subtracted in 200 components = 0.00095682 Jy
! Clean residual min=-0.002055 max=0.001929 Jy/beam
! Clean residual mean=-0.000010 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.69137 Jy
! Adding 109 model components to the UV plane model.
! The established model now contains 231 components and 0.69137 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.805 mas, bmaj=11.92 mas, bpa=-15.85 degrees
! Estimated noise=1.26004 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000585709 Jy
! Component: 100  -  total flux cleaned = 0.000867573 Jy
! Component: 150  -  total flux cleaned = 0.00107681 Jy
! Component: 200  -  total flux cleaned = 0.00112605 Jy
! Total flux subtracted in 200 components = 0.00112605 Jy
! Clean residual min=-0.001861 max=0.001996 Jy/beam
! Clean residual mean=-0.000006 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.692497 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 264 components and 0.692496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069589Jy  sigma=0.340448
! Fit after  self-cal, rms=0.069562Jy  sigma=0.340330
wmodel J2203+1725_S_map.mod
! Writing 264 model components to file: J2203+1725_S_map.mod
wobs   J2203+1725_S_uvs.fits
! Writing UV FITS file: J2203+1725_S_uvs.fits
wwins  J2203+1725_S_map.win
! wwins: Wrote 5 windows to J2203+1725_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000370851 Jy
! Component: 100  -  total flux cleaned = 0.000275509 Jy
! Component: 150  -  total flux cleaned = 0.000366589 Jy
! Component: 200  -  total flux cleaned = 0.000425614 Jy
! Component: 250  -  total flux cleaned = 0.000509925 Jy
! Component: 300  -  total flux cleaned = 0.000591874 Jy
! Component: 350  -  total flux cleaned = 0.000565891 Jy
! Component: 400  -  total flux cleaned = 0.000644306 Jy
! Component: 450  -  total flux cleaned = 0.000745228 Jy
! Component: 500  -  total flux cleaned = 0.000818687 Jy
! Component: 550  -  total flux cleaned = 0.000890669 Jy
! Component: 600  -  total flux cleaned = 0.000867342 Jy
! Component: 650  -  total flux cleaned = 0.00089044 Jy
! Component: 700  -  total flux cleaned = 0.000935882 Jy
! Component: 750  -  total flux cleaned = 0.000980719 Jy
! Component: 800  -  total flux cleaned = 0.00100261 Jy
! Component: 850  -  total flux cleaned = 0.00100304 Jy
! Component: 900  -  total flux cleaned = 0.00102387 Jy
! Component: 950  -  total flux cleaned = 0.00100316 Jy
! Component: 1000  -  total flux cleaned = 0.000982695 Jy
! Component: 1050  -  total flux cleaned = 0.000902574 Jy
! Component: 1100  -  total flux cleaned = 0.000882994 Jy
! Component: 1150  -  total flux cleaned = 0.000766414 Jy
! Component: 1200  -  total flux cleaned = 0.000728218 Jy
! Component: 1250  -  total flux cleaned = 0.000690588 Jy
! Component: 1300  -  total flux cleaned = 0.000671949 Jy
! Component: 1350  -  total flux cleaned = 0.000543632 Jy
! Component: 1400  -  total flux cleaned = 0.00054356 Jy
! Component: 1450  -  total flux cleaned = 0.000472301 Jy
! Component: 1500  -  total flux cleaned = 0.000402157 Jy
! Component: 1550  -  total flux cleaned = 0.00036751 Jy
! Component: 1600  -  total flux cleaned = 0.000298826 Jy
! Component: 1650  -  total flux cleaned = 0.000247997 Jy
! Component: 1700  -  total flux cleaned = 0.000231069 Jy
! Component: 1750  -  total flux cleaned = 0.000197651 Jy
! Component: 1800  -  total flux cleaned = 0.000164924 Jy
! Component: 1850  -  total flux cleaned = 0.000165047 Jy
! Component: 1900  -  total flux cleaned = 0.000117105 Jy
! Component: 1950  -  total flux cleaned = 0.000132903 Jy
! Component: 2000  -  total flux cleaned = 0.000148542 Jy
! Component: 2050  -  total flux cleaned = 0.000148287 Jy
! Component: 2100  -  total flux cleaned = 5.61456e-05 Jy
! Component: 2150  -  total flux cleaned = 4.09631e-05 Jy
! Component: 2200  -  total flux cleaned = -3.42042e-05 Jy
! Component: 2250  -  total flux cleaned = -4.50859e-06 Jy
! Component: 2300  -  total flux cleaned = -6.36812e-05 Jy
! Component: 2350  -  total flux cleaned = -0.000151419 Jy
! Component: 2400  -  total flux cleaned = -0.000180231 Jy
! Component: 2450  -  total flux cleaned = -0.000223248 Jy
! Component: 2500  -  total flux cleaned = -0.000265817 Jy
! Component: 2550  -  total flux cleaned = -0.000294191 Jy
! Component: 2600  -  total flux cleaned = -0.000321964 Jy
! Component: 2650  -  total flux cleaned = -0.000321865 Jy
! Component: 2700  -  total flux cleaned = -0.000390412 Jy
! Component: 2750  -  total flux cleaned = -0.000403765 Jy
! Component: 2800  -  total flux cleaned = -0.000376647 Jy
! Component: 2850  -  total flux cleaned = -0.000483892 Jy
! Component: 2900  -  total flux cleaned = -0.000497204 Jy
! Component: 2950  -  total flux cleaned = -0.000510508 Jy
! Component: 3000  -  total flux cleaned = -0.000588966 Jy
! Component: 3050  -  total flux cleaned = -0.000627735 Jy
! Component: 3100  -  total flux cleaned = -0.000614621 Jy
! Component: 3150  -  total flux cleaned = -0.000601875 Jy
! Component: 3200  -  total flux cleaned = -0.000627298 Jy
! Component: 3250  -  total flux cleaned = -0.000652487 Jy
! Component: 3300  -  total flux cleaned = -0.000690077 Jy
! Component: 3350  -  total flux cleaned = -0.000714926 Jy
! Component: 3400  -  total flux cleaned = -0.000739529 Jy
! Component: 3450  -  total flux cleaned = -0.000763963 Jy
! Component: 3500  -  total flux cleaned = -0.000788197 Jy
! Component: 3550  -  total flux cleaned = -0.000836509 Jy
! Component: 3600  -  total flux cleaned = -0.000872551 Jy
! Component: 3650  -  total flux cleaned = -0.000908249 Jy
! Component: 3700  -  total flux cleaned = -0.000967335 Jy
! Component: 3750  -  total flux cleaned = -0.000955501 Jy
! Component: 3800  -  total flux cleaned = -0.00096727 Jy
! Component: 3850  -  total flux cleaned = -0.00101354 Jy
! Component: 3900  -  total flux cleaned = -0.000990605 Jy
! Component: 3950  -  total flux cleaned = -0.00102505 Jy
! Component: 4000  -  total flux cleaned = -0.00110449 Jy
! Component: 4050  -  total flux cleaned = -0.00110439 Jy
! Total flux subtracted in 4096 components = -0.00116041 Jy
! Clean residual min=-0.000601 max=0.000694 Jy/beam
! Clean residual mean=-0.000001 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.691336 Jy
keep
! Adding 257 model components to the UV plane model.
! The established model now contains 521 components and 0.691336 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2203+1725_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.805 x 11.92 at -15.85 degrees (North through East)
! Clean map  min=-0.0025971  max=0.57782 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2203+1725_S_map.fits
wmodel /image_prod/ug002_uva//J2203+1725_S_map.mod
! Writing 521 model components to file: /image_prod/ug002_uva//J2203+1725_S_map.mod
wobs   /image_prod/ug002_uva//J2203+1725_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2203+1725_S_uvs.fits
wwins  /image_prod/ug002_uva//J2203+1725_S_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J2203+1725_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.577816 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00021122 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.109665 0.109665 0.219329 0.438658 0.877317 1.75463 3.50927 7.01853 14.0371 28.0741 56.1483
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.577 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2735.61 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2203+1725_S_dfm.log closed on Thu Mar  5 05:27:30 2020