! Started logfile: /image_prod/ug002_uva//J2203+1007_S_dfm.log on Thu Mar  5 05:27:13 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2203+1007_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2203+1007_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.983333 visibilities/baseline/integration-bin.
! Found source: J2203+1007
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7965 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2203+1007_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021077Jy  sigma=8.140403
! Fit after  self-cal, rms=0.874371Jy  sigma=6.832160
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.241 mas, bmaj=12.4 mas, bpa=-17.8 degrees
! Estimated noise=1.3713 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101225 Jy
! Component: 100  -  total flux cleaned = 0.137754 Jy
! Total flux subtracted in 100 components = 0.137754 Jy
! Clean residual min=-0.019566 max=0.061827 Jy/beam
! Clean residual mean=-0.000115 rms=0.005835 Jy/beam
! Combined flux in latest and established models = 0.137754 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.137754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122776Jy  sigma=0.909577
! Fit after  self-cal, rms=0.122388Jy  sigma=0.907053
! Inverting map 
! Added new window around map position (-8.5, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0513537 Jy
! Component: 100  -  total flux cleaned = 0.0726989 Jy
! Total flux subtracted in 100 components = 0.0726989 Jy
! Clean residual min=-0.013436 max=0.031851 Jy/beam
! Clean residual mean=-0.000064 rms=0.003970 Jy/beam
! Combined flux in latest and established models = 0.210453 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 35 components and 0.210453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098233Jy  sigma=0.712066
! Fit after  self-cal, rms=0.087209Jy  sigma=0.639222
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0286777 Jy
! Component: 100  -  total flux cleaned = 0.0416698 Jy
! Total flux subtracted in 100 components = 0.0416698 Jy
! Clean residual min=-0.007962 max=0.009673 Jy/beam
! Clean residual mean=-0.000034 rms=0.002314 Jy/beam
! Combined flux in latest and established models = 0.252122 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 45 components and 0.252123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076618Jy  sigma=0.558624
! Fit after  self-cal, rms=0.074684Jy  sigma=0.546679
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.848 mas, bmaj=12.97 mas, bpa=-17.57 degrees
! Estimated noise=1.02913 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130326 Jy
! Component: 100  -  total flux cleaned = 0.0153229 Jy
! Component: 150  -  total flux cleaned = 0.0164156 Jy
! Component: 200  -  total flux cleaned = 0.017124 Jy
! Total flux subtracted in 200 components = 0.017124 Jy
! Clean residual min=-0.005632 max=0.008112 Jy/beam
! Clean residual mean=-0.000021 rms=0.001705 Jy/beam
! Combined flux in latest and established models = 0.269247 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 65 components and 0.269247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071783Jy  sigma=0.528524
! Fit after  self-cal, rms=0.071338Jy  sigma=0.525954
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.848 x 12.97 at -17.57 degrees (North through East)
! Clean map  min=-0.0053958  max=0.12483 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.03     KP        0.96     
!   LA        1.33     MK        1.11     NL        0.92     OV        0.96     
!   PT        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.06     HN        1.00     KP        0.96     
!   LA        0.98     MK        1.05     NL        0.87     OV        1.01     
!   PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.03     KP        0.97     
!   LA        0.98     MK        1.01     NL        0.94     OV        0.94     
!   PT        0.97     
! 
! 
! Fit before self-cal, rms=0.071338Jy  sigma=0.525954
! Fit after  self-cal, rms=0.070755Jy  sigma=0.502212
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.91 mas, bmaj=12.91 mas, bpa=-17.54 degrees
! Estimated noise=1.01887 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120623 Jy
! Component: 100  -  total flux cleaned = 0.00214367 Jy
! Component: 150  -  total flux cleaned = 0.00276983 Jy
! Component: 200  -  total flux cleaned = 0.00294985 Jy
! Total flux subtracted in 200 components = 0.00294985 Jy
! Clean residual min=-0.004934 max=0.005264 Jy/beam
! Clean residual mean=-0.000014 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.272196 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 91 components and 0.272196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070166Jy  sigma=0.497864
! Fit after  self-cal, rms=0.070096Jy  sigma=0.497011
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070096Jy  sigma=0.497011
! Fit after  self-cal, rms=0.070360Jy  sigma=0.451057
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.934 mas, bmaj=12.81 mas, bpa=-17.39 degrees
! Estimated noise=1.01643 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000366826 Jy
! Component: 100  -  total flux cleaned = 0.000360775 Jy
! Component: 150  -  total flux cleaned = 0.000570773 Jy
! Component: 200  -  total flux cleaned = 0.000755031 Jy
! Total flux subtracted in 200 components = 0.000755031 Jy
! Clean residual min=-0.002501 max=0.002420 Jy/beam
! Clean residual mean=0.000002 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.272951 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 104 components and 0.272951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070171Jy  sigma=0.449436
! Fit after  self-cal, rms=0.070237Jy  sigma=0.448953
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.33633e-06 Jy
! Component: 100  -  total flux cleaned = 5.22772e-05 Jy
! Component: 150  -  total flux cleaned = 5.19478e-05 Jy
! Component: 200  -  total flux cleaned = 4.88021e-05 Jy
! Total flux subtracted in 200 components = 4.88021e-05 Jy
! Clean residual min=-0.002412 max=0.002269 Jy/beam
! Clean residual mean=0.000002 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.273 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 107 components and 0.273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070137Jy  sigma=0.448190
! Fit after  self-cal, rms=0.070123Jy  sigma=0.448083
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070123Jy  sigma=0.448083
! Fit after  self-cal, rms=0.070111Jy  sigma=0.446795
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.926 mas, bmaj=12.81 mas, bpa=-17.38 degrees
! Estimated noise=1.01092 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000909783 Jy
! Component: 100  -  total flux cleaned = -0.000908188 Jy
! Component: 150  -  total flux cleaned = -0.000908936 Jy
! Component: 200  -  total flux cleaned = -0.000825494 Jy
! Total flux subtracted in 200 components = -0.000825494 Jy
! Clean residual min=-0.002202 max=0.002043 Jy/beam
! Clean residual mean=-0.000002 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.272175 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 117 components and 0.272175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070041Jy  sigma=0.446275
! Fit after  self-cal, rms=0.070036Jy  sigma=0.446212
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.96646e-05 Jy
! Component: 100  -  total flux cleaned = 0.000120256 Jy
! Component: 150  -  total flux cleaned = 0.000158038 Jy
! Component: 200  -  total flux cleaned = 0.000156287 Jy
! Total flux subtracted in 200 components = 0.000156287 Jy
! Clean residual min=-0.002095 max=0.001950 Jy/beam
! Clean residual mean=-0.000001 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.272331 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 120 components and 0.272331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069990Jy  sigma=0.445861
! Fit after  self-cal, rms=0.069986Jy  sigma=0.445821
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069986Jy  sigma=0.445821
! Fit after  self-cal, rms=0.069841Jy  sigma=0.445801
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.893 mas, bmaj=13.27 mas, bpa=-14.19 degrees
! Estimated noise=1.12119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000265593 Jy
! Component: 100  -  total flux cleaned = -0.000289095 Jy
! Component: 150  -  total flux cleaned = -0.00028976 Jy
! Component: 200  -  total flux cleaned = -0.00025599 Jy
! Total flux subtracted in 200 components = -0.00025599 Jy
! Clean residual min=-0.001997 max=0.002088 Jy/beam
! Clean residual mean=-0.000003 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.272075 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 138 components and 0.272075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069832Jy  sigma=0.445704
! Fit after  self-cal, rms=0.069831Jy  sigma=0.445689
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.83654e-05 Jy
! Component: 100  -  total flux cleaned = 0.000100869 Jy
! Component: 150  -  total flux cleaned = 0.00011532 Jy
! Component: 200  -  total flux cleaned = 0.000115585 Jy
! Total flux subtracted in 200 components = 0.000115585 Jy
! Clean residual min=-0.001955 max=0.002069 Jy/beam
! Clean residual mean=-0.000003 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.272191 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 148 components and 0.272191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069827Jy  sigma=0.445653
! Fit after  self-cal, rms=0.069826Jy  sigma=0.445643
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.923 mas, bmaj=12.82 mas, bpa=-17.4 degrees
! Estimated noise=1.00831 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.923 x 12.82 at -17.4 degrees (North through East)
! Clean map  min=-0.0019616  max=0.12099 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.302 mas, bmaj=12.27 mas, bpa=-17.63 degrees
! Estimated noise=1.35913 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116911 Jy
! Component: 100  -  total flux cleaned = 0.174483 Jy
! Component: 150  -  total flux cleaned = 0.207838 Jy
! Component: 200  -  total flux cleaned = 0.227773 Jy
! Total flux subtracted in 200 components = 0.227773 Jy
! Clean residual min=-0.004686 max=0.010220 Jy/beam
! Clean residual mean=-0.000031 rms=0.001526 Jy/beam
! Combined flux in latest and established models = 0.227773 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.227773 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.923 mas, bmaj=12.82 mas, bpa=-17.4 degrees
! Estimated noise=1.00831 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015566 Jy
! Component: 100  -  total flux cleaned = 0.0248367 Jy
! Component: 150  -  total flux cleaned = 0.0308079 Jy
! Component: 200  -  total flux cleaned = 0.0349428 Jy
! Total flux subtracted in 200 components = 0.0349428 Jy
! Clean residual min=-0.002008 max=0.002529 Jy/beam
! Clean residual mean=-0.000004 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.262716 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 89 components and 0.262716 Jy
! Inverting map 
! Added new window around map position (-27.5, 42.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300629 Jy
! Component: 100  -  total flux cleaned = 0.00522857 Jy
! Component: 150  -  total flux cleaned = 0.00683843 Jy
! Component: 200  -  total flux cleaned = 0.00775758 Jy
! Total flux subtracted in 200 components = 0.00775758 Jy
! Clean residual min=-0.001721 max=0.002104 Jy/beam
! Clean residual mean=-0.000003 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.270473 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 120 components and 0.270473 Jy
! Inverting map 
! Added new window around map position (-57.5, 39).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000985792 Jy
! Component: 100  -  total flux cleaned = 0.00187491 Jy
! Component: 150  -  total flux cleaned = 0.00265116 Jy
! Component: 200  -  total flux cleaned = 0.00326663 Jy
! Total flux subtracted in 200 components = 0.00326663 Jy
! Clean residual min=-0.001519 max=0.001743 Jy/beam
! Clean residual mean=-0.000002 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.27374 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 146 components and 0.27374 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.893 mas, bmaj=13.27 mas, bpa=-14.19 degrees
! Estimated noise=1.12119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000729177 Jy
! Component: 100  -  total flux cleaned = 0.00116857 Jy
! Component: 150  -  total flux cleaned = 0.00151818 Jy
! Component: 200  -  total flux cleaned = 0.00177601 Jy
! Total flux subtracted in 200 components = 0.00177601 Jy
! Clean residual min=-0.001599 max=0.001589 Jy/beam
! Clean residual mean=-0.000004 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.275516 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000207364 Jy
! Component: 100  -  total flux cleaned = 0.000271451 Jy
! Component: 150  -  total flux cleaned = 0.000370134 Jy
! Component: 200  -  total flux cleaned = 0.000407548 Jy
! Total flux subtracted in 200 components = 0.000407548 Jy
! Clean residual min=-0.001554 max=0.001535 Jy/beam
! Clean residual mean=-0.000003 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.275923 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 194 components and 0.275923 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.923 mas, bmaj=12.82 mas, bpa=-17.4 degrees
! Estimated noise=1.00831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000106137 Jy
! Component: 100  -  total flux cleaned = -1.06628e-05 Jy
! Component: 150  -  total flux cleaned = 4.67614e-05 Jy
! Component: 200  -  total flux cleaned = 4.75854e-05 Jy
! Total flux subtracted in 200 components = 4.75854e-05 Jy
! Clean residual min=-0.001473 max=0.001550 Jy/beam
! Clean residual mean=-0.000002 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.275971 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 217 components and 0.275971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069606Jy  sigma=0.443898
! Fit after  self-cal, rms=0.069566Jy  sigma=0.443666
wmodel J2203+1007_S_map.mod
! Writing 217 model components to file: J2203+1007_S_map.mod
wobs   J2203+1007_S_uvs.fits
! Writing UV FITS file: J2203+1007_S_uvs.fits
wwins  J2203+1007_S_map.win
! wwins: Wrote 4 windows to J2203+1007_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000455183 Jy
! Component: 100  -  total flux cleaned = -0.0007793 Jy
! Component: 150  -  total flux cleaned = -0.00106636 Jy
! Component: 200  -  total flux cleaned = -0.00129705 Jy
! Component: 250  -  total flux cleaned = -0.00134227 Jy
! Component: 300  -  total flux cleaned = -0.00140837 Jy
! Component: 350  -  total flux cleaned = -0.00149456 Jy
! Component: 400  -  total flux cleaned = -0.00159975 Jy
! Component: 450  -  total flux cleaned = -0.00170249 Jy
! Component: 500  -  total flux cleaned = -0.00178319 Jy
! Component: 550  -  total flux cleaned = -0.00182306 Jy
! Component: 600  -  total flux cleaned = -0.00190138 Jy
! Component: 650  -  total flux cleaned = -0.00197821 Jy
! Component: 700  -  total flux cleaned = -0.00201609 Jy
! Component: 750  -  total flux cleaned = -0.0020719 Jy
! Component: 800  -  total flux cleaned = -0.00216324 Jy
! Component: 850  -  total flux cleaned = -0.00221736 Jy
! Component: 900  -  total flux cleaned = -0.00223553 Jy
! Component: 950  -  total flux cleaned = -0.00228851 Jy
! Component: 1000  -  total flux cleaned = -0.00234014 Jy
! Component: 1050  -  total flux cleaned = -0.00242512 Jy
! Component: 1100  -  total flux cleaned = -0.00240845 Jy
! Component: 1150  -  total flux cleaned = -0.00250759 Jy
! Component: 1200  -  total flux cleaned = -0.00249118 Jy
! Component: 1250  -  total flux cleaned = -0.00253976 Jy
! Component: 1300  -  total flux cleaned = -0.00263542 Jy
! Component: 1350  -  total flux cleaned = -0.00263502 Jy
! Component: 1400  -  total flux cleaned = -0.00266616 Jy
! Component: 1450  -  total flux cleaned = -0.00269723 Jy
! Component: 1500  -  total flux cleaned = -0.00277303 Jy
! Component: 1550  -  total flux cleaned = -0.00280311 Jy
! Component: 1600  -  total flux cleaned = -0.00284759 Jy
! Component: 1650  -  total flux cleaned = -0.0028917 Jy
! Component: 1700  -  total flux cleaned = -0.0029352 Jy
! Component: 1750  -  total flux cleaned = -0.00299251 Jy
! Component: 1800  -  total flux cleaned = -0.00303507 Jy
! Component: 1850  -  total flux cleaned = -0.00306308 Jy
! Component: 1900  -  total flux cleaned = -0.00310468 Jy
! Component: 1950  -  total flux cleaned = -0.00310494 Jy
! Component: 2000  -  total flux cleaned = -0.003173 Jy
! Component: 2050  -  total flux cleaned = -0.0032266 Jy
! Component: 2100  -  total flux cleaned = -0.00326656 Jy
! Component: 2150  -  total flux cleaned = -0.00327959 Jy
! Component: 2200  -  total flux cleaned = -0.00331868 Jy
! Component: 2250  -  total flux cleaned = -0.00331856 Jy
! Component: 2300  -  total flux cleaned = -0.0033187 Jy
! Component: 2350  -  total flux cleaned = -0.0033699 Jy
! Component: 2400  -  total flux cleaned = -0.0033953 Jy
! Component: 2450  -  total flux cleaned = -0.00343301 Jy
! Component: 2500  -  total flux cleaned = -0.00348283 Jy
! Component: 2550  -  total flux cleaned = -0.0035197 Jy
! Component: 2600  -  total flux cleaned = -0.0035075 Jy
! Component: 2650  -  total flux cleaned = -0.00350765 Jy
! Component: 2700  -  total flux cleaned = -0.00351989 Jy
! Component: 2750  -  total flux cleaned = -0.0035558 Jy
! Component: 2800  -  total flux cleaned = -0.00359142 Jy
! Component: 2850  -  total flux cleaned = -0.00365029 Jy
! Component: 2900  -  total flux cleaned = -0.00365021 Jy
! Component: 2950  -  total flux cleaned = -0.0036734 Jy
! Component: 3000  -  total flux cleaned = -0.00368497 Jy
! Component: 3050  -  total flux cleaned = -0.00373076 Jy
! Component: 3100  -  total flux cleaned = -0.00370791 Jy
! Component: 3150  -  total flux cleaned = -0.00375298 Jy
! Component: 3200  -  total flux cleaned = -0.00376415 Jy
! Component: 3250  -  total flux cleaned = -0.00379754 Jy
! Component: 3300  -  total flux cleaned = -0.0037976 Jy
! Component: 3350  -  total flux cleaned = -0.00387436 Jy
! Component: 3400  -  total flux cleaned = -0.00388526 Jy
! Component: 3450  -  total flux cleaned = -0.00389598 Jy
! Component: 3500  -  total flux cleaned = -0.00392823 Jy
! Component: 3550  -  total flux cleaned = -0.00390684 Jy
! Component: 3600  -  total flux cleaned = -0.00392817 Jy
! Component: 3650  -  total flux cleaned = -0.00399154 Jy
! Component: 3700  -  total flux cleaned = -0.0040021 Jy
! Component: 3750  -  total flux cleaned = -0.00404389 Jy
! Component: 3800  -  total flux cleaned = -0.00408537 Jy
! Component: 3850  -  total flux cleaned = -0.00405442 Jy
! Component: 3900  -  total flux cleaned = -0.00410565 Jy
! Component: 3950  -  total flux cleaned = -0.00412596 Jy
! Component: 4000  -  total flux cleaned = -0.00416649 Jy
! Component: 4050  -  total flux cleaned = -0.00415651 Jy
! Total flux subtracted in 4096 components = -0.00415656 Jy
! Clean residual min=-0.000557 max=0.000622 Jy/beam
! Clean residual mean=0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.271814 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 496 components and 0.271814 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2203+1007_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.923 x 12.82 at -17.4 degrees (North through East)
! Clean map  min=-0.0014226  max=0.12078 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2203+1007_S_map.fits
wmodel /image_prod/ug002_uva//J2203+1007_S_map.mod
! Writing 496 model components to file: /image_prod/ug002_uva//J2203+1007_S_map.mod
wobs   /image_prod/ug002_uva//J2203+1007_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2203+1007_S_uvs.fits
wwins  /image_prod/ug002_uva//J2203+1007_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J2203+1007_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.120781 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000192206 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.477408 0.477408 0.954817 1.90963 3.81927 7.63854 15.2771 30.5541 61.1083
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.12 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  628.392 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2203+1007_S_dfm.log closed on Thu Mar  5 05:27:18 2020