! Started logfile: /image_prod/ug002_uva//J2200-1632_X_dfm.log on Thu Mar  5 05:26:25 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J2200-1632_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2200-1632_X_uva.fits
! AN table 1: 60 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.991667 visibilities/baseline/integration-bin.
! Found source: J2200-1632
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 19992 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2200-1632_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014568Jy  sigma=8.009920
! Fit after  self-cal, rms=0.894720Jy  sigma=7.050053
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.614 mas, bmaj=1.465 mas, bpa=-3.977 degrees
! Estimated noise=1.18992 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0810973 Jy
! Component: 100  -  total flux cleaned = 0.100943 Jy
! Total flux subtracted in 100 components = 0.100943 Jy
! Clean residual min=-0.005065 max=0.007983 Jy/beam
! Clean residual mean=0.000000 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.100943 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.100943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069577Jy  sigma=0.490135
! Fit after  self-cal, rms=0.069537Jy  sigma=0.489895
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0085287 Jy
! Component: 100  -  total flux cleaned = 0.0129521 Jy
! Total flux subtracted in 100 components = 0.0129521 Jy
! Clean residual min=-0.004348 max=0.005839 Jy/beam
! Clean residual mean=-0.000000 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.113895 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.113895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068320Jy  sigma=0.478644
! Fit after  self-cal, rms=0.068322Jy  sigma=0.478530
! Inverting map 
! Added new window around map position (1.8, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00517274 Jy
! Component: 100  -  total flux cleaned = 0.0081487 Jy
! Total flux subtracted in 100 components = 0.0081487 Jy
! Clean residual min=-0.003624 max=0.003787 Jy/beam
! Clean residual mean=-0.000001 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.122044 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 0.122044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067962Jy  sigma=0.475143
! Fit after  self-cal, rms=0.067908Jy  sigma=0.474788
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.768 mas, bmaj=1.778 mas, bpa=-2.984 degrees
! Estimated noise=0.648482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025425 Jy
! Component: 100  -  total flux cleaned = 0.00412241 Jy
! Component: 150  -  total flux cleaned = 0.00492231 Jy
! Component: 200  -  total flux cleaned = 0.0052661 Jy
! Total flux subtracted in 200 components = 0.0052661 Jy
! Clean residual min=-0.003296 max=0.003948 Jy/beam
! Clean residual mean=-0.000001 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.12731 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 35 components and 0.12731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067802Jy  sigma=0.473871
! Fit after  self-cal, rms=0.067790Jy  sigma=0.473818
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.768 x 1.778 at -2.984 degrees (North through East)
! Clean map  min=-0.0031433  max=0.10681 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.93     LA        1.05     MK        1.02     
!   NL        1.08     OV        0.94     PT        0.91     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     HN        0.96     LA        1.04     MK        1.01     
!   NL        1.11     OV        0.91     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.94     LA        1.08     MK        0.98     
!   NL        1.09     OV        0.93     PT        0.95     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     HN        0.91     LA        1.04     MK        1.04     
!   NL        1.12     OV        0.94     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     HN        0.92     LA        1.04     MK        0.98     
!   NL        1.08     OV        0.94     PT        0.99     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     HN        0.97     LA        1.04     MK        1.02     
!   NL        1.09     OV        0.94     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        0.98     LA        1.06     MK        1.06     
!   NL        1.08     OV        0.92     PT        0.97     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     HN        0.92     LA        1.06     MK        1.05     
!   NL        1.12     OV        0.90     PT        0.97     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     HN        0.95     LA        1.07     MK        1.06     
!   NL        1.09     OV        0.92     PT        0.96     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     HN        0.93     LA        1.05     MK        1.05     
!   NL        1.13     OV        0.95     PT        0.96     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        0.91     LA        1.08     MK        0.98     
!   NL        1.14     OV        0.93     PT        0.97     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        1.03     LA        1.04     MK        1.09     
!   NL        1.10     OV        0.89     PT        0.94     SC        1.10     
! 
! 
! Fit before self-cal, rms=0.067790Jy  sigma=0.473818
! Fit after  self-cal, rms=0.066425Jy  sigma=0.468446
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7718 mas, bmaj=1.79 mas, bpa=-2.796 degrees
! Estimated noise=0.649049 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0019573 Jy
! Component: 100  -  total flux cleaned = -0.00269401 Jy
! Component: 150  -  total flux cleaned = -0.00292042 Jy
! Component: 200  -  total flux cleaned = -0.00303382 Jy
! Total flux subtracted in 200 components = -0.00303382 Jy
! Clean residual min=-0.001935 max=0.001779 Jy/beam
! Clean residual mean=0.000001 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.124276 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.124276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066369Jy  sigma=0.467975
! Fit after  self-cal, rms=0.066385Jy  sigma=0.467824
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066385Jy  sigma=0.467824
! Fit after  self-cal, rms=0.067618Jy  sigma=0.466155
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7716 mas, bmaj=1.792 mas, bpa=-2.756 degrees
! Estimated noise=0.648781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120737 Jy
! Component: 100  -  total flux cleaned = -0.00149652 Jy
! Component: 150  -  total flux cleaned = -0.00158262 Jy
! Component: 200  -  total flux cleaned = -0.00164425 Jy
! Total flux subtracted in 200 components = -0.00164425 Jy
! Clean residual min=-0.001511 max=0.001387 Jy/beam
! Clean residual mean=0.000000 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.122632 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 47 components and 0.122632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067593Jy  sigma=0.465973
! Fit after  self-cal, rms=0.067638Jy  sigma=0.465911
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000310605 Jy
! Component: 100  -  total flux cleaned = -0.0003115 Jy
! Component: 150  -  total flux cleaned = -0.000323607 Jy
! Component: 200  -  total flux cleaned = -0.000322741 Jy
! Total flux subtracted in 200 components = -0.000322741 Jy
! Clean residual min=-0.001461 max=0.001349 Jy/beam
! Clean residual mean=0.000000 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.122309 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 50 components and 0.122309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067631Jy  sigma=0.465873
! Fit after  self-cal, rms=0.067631Jy  sigma=0.465869
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067631Jy  sigma=0.465869
! Fit after  self-cal, rms=0.067710Jy  sigma=0.465797
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.772 mas, bmaj=1.794 mas, bpa=-2.723 degrees
! Estimated noise=0.648481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000671931 Jy
! Component: 100  -  total flux cleaned = -0.000842811 Jy
! Component: 150  -  total flux cleaned = -0.000907353 Jy
! Component: 200  -  total flux cleaned = -0.000941849 Jy
! Total flux subtracted in 200 components = -0.000941849 Jy
! Clean residual min=-0.001421 max=0.001286 Jy/beam
! Clean residual mean=0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.121367 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.121367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067701Jy  sigma=0.465734
! Fit after  self-cal, rms=0.067706Jy  sigma=0.465727
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00015878 Jy
! Component: 100  -  total flux cleaned = -0.000169092 Jy
! Component: 150  -  total flux cleaned = -0.000178895 Jy
! Component: 200  -  total flux cleaned = -0.000169636 Jy
! Total flux subtracted in 200 components = -0.000169636 Jy
! Clean residual min=-0.001400 max=0.001265 Jy/beam
! Clean residual mean=0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.121198 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 52 components and 0.121198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067703Jy  sigma=0.465704
! Fit after  self-cal, rms=0.067703Jy  sigma=0.465703
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067703Jy  sigma=0.465703
! Fit after  self-cal, rms=0.067730Jy  sigma=0.465681
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.891 mas, bmaj=3.93 mas, bpa=2.945 degrees
! Estimated noise=0.868356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000375096 Jy
! Component: 100  -  total flux cleaned = -0.000422101 Jy
! Component: 150  -  total flux cleaned = -0.000458794 Jy
! Component: 200  -  total flux cleaned = -0.00047407 Jy
! Total flux subtracted in 200 components = -0.00047407 Jy
! Clean residual min=-0.001532 max=0.001294 Jy/beam
! Clean residual mean=0.000002 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.120723 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 0.120723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067731Jy  sigma=0.465676
! Fit after  self-cal, rms=0.067732Jy  sigma=0.465665
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.85565e-05 Jy
! Component: 100  -  total flux cleaned = -6.43402e-05 Jy
! Component: 150  -  total flux cleaned = -7.07607e-05 Jy
! Component: 200  -  total flux cleaned = -7.06068e-05 Jy
! Total flux subtracted in 200 components = -7.06068e-05 Jy
! Clean residual min=-0.001529 max=0.001279 Jy/beam
! Clean residual mean=0.000002 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.120653 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 59 components and 0.120653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067734Jy  sigma=0.465672
! Fit after  self-cal, rms=0.067733Jy  sigma=0.465667
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7724 mas, bmaj=1.795 mas, bpa=-2.698 degrees
! Estimated noise=0.648244 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7724 x 1.795 at -2.698 degrees (North through East)
! Clean map  min=-0.0012786  max=0.10711 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6175 mas, bmaj=1.473 mas, bpa=-3.504 degrees
! Estimated noise=1.19247 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0811143 Jy
! Component: 100  -  total flux cleaned = 0.101541 Jy
! Component: 150  -  total flux cleaned = 0.11009 Jy
! Component: 200  -  total flux cleaned = 0.114199 Jy
! Total flux subtracted in 200 components = 0.114199 Jy
! Clean residual min=-0.002266 max=0.002266 Jy/beam
! Clean residual mean=0.000001 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.114199 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.114199 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7724 mas, bmaj=1.795 mas, bpa=-2.698 degrees
! Estimated noise=0.648244 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00283377 Jy
! Component: 100  -  total flux cleaned = 0.00438448 Jy
! Component: 150  -  total flux cleaned = 0.00531767 Jy
! Component: 200  -  total flux cleaned = 0.00557546 Jy
! Total flux subtracted in 200 components = 0.00557546 Jy
! Clean residual min=-0.001331 max=0.001255 Jy/beam
! Clean residual mean=0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.119775 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 22 components and 0.119775 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.891 mas, bmaj=3.93 mas, bpa=2.945 degrees
! Estimated noise=0.868356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000764638 Jy
! Component: 100  -  total flux cleaned = 0.000857257 Jy
! Component: 150  -  total flux cleaned = 0.000927807 Jy
! Component: 200  -  total flux cleaned = 0.000969618 Jy
! Total flux subtracted in 200 components = 0.000969618 Jy
! Clean residual min=-0.001602 max=0.001337 Jy/beam
! Clean residual mean=0.000002 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.120744 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.09793e-05 Jy
! Component: 100  -  total flux cleaned = 2.04797e-05 Jy
! Component: 150  -  total flux cleaned = 2.92376e-05 Jy
! Component: 200  -  total flux cleaned = 4.40706e-05 Jy
! Total flux subtracted in 200 components = 4.40706e-05 Jy
! Clean residual min=-0.001555 max=0.001273 Jy/beam
! Clean residual mean=0.000002 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.120788 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 0.120788 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7724 mas, bmaj=1.795 mas, bpa=-2.698 degrees
! Estimated noise=0.648244 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164908 Jy
! Component: 100  -  total flux cleaned = 6.63308e-05 Jy
! Component: 150  -  total flux cleaned = -1.41422e-05 Jy
! Component: 200  -  total flux cleaned = -2.83341e-05 Jy
! Total flux subtracted in 200 components = -2.83341e-05 Jy
! Clean residual min=-0.001348 max=0.001270 Jy/beam
! Clean residual mean=0.000001 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.12076 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.12076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067743Jy  sigma=0.465695
! Fit after  self-cal, rms=0.067743Jy  sigma=0.465678
wmodel J2200-1632_X_map.mod
! Writing 40 model components to file: J2200-1632_X_map.mod
wobs   J2200-1632_X_uvs.fits
! Writing UV FITS file: J2200-1632_X_uvs.fits
wwins  J2200-1632_X_map.win
! wwins: Wrote 2 windows to J2200-1632_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000292576 Jy
! Component: 100  -  total flux cleaned = -0.000377015 Jy
! Component: 150  -  total flux cleaned = -0.000417722 Jy
! Component: 200  -  total flux cleaned = -0.000417793 Jy
! Component: 250  -  total flux cleaned = -0.000472475 Jy
! Component: 300  -  total flux cleaned = -0.000472906 Jy
! Component: 350  -  total flux cleaned = -0.000524471 Jy
! Component: 400  -  total flux cleaned = -0.000491204 Jy
! Component: 450  -  total flux cleaned = -0.000426294 Jy
! Component: 500  -  total flux cleaned = -0.000347117 Jy
! Component: 550  -  total flux cleaned = -0.00023886 Jy
! Component: 600  -  total flux cleaned = -0.000178451 Jy
! Component: 650  -  total flux cleaned = -5.98967e-05 Jy
! Component: 700  -  total flux cleaned = 4.19133e-05 Jy
! Component: 750  -  total flux cleaned = 0.000141687 Jy
! Component: 800  -  total flux cleaned = 0.000239764 Jy
! Component: 850  -  total flux cleaned = 0.00036336 Jy
! Component: 900  -  total flux cleaned = 0.000430903 Jy
! Component: 950  -  total flux cleaned = 0.000537282 Jy
! Component: 1000  -  total flux cleaned = 0.000602464 Jy
! Component: 1050  -  total flux cleaned = 0.000692518 Jy
! Component: 1100  -  total flux cleaned = 0.000768488 Jy
! Component: 1150  -  total flux cleaned = 0.000806042 Jy
! Component: 1200  -  total flux cleaned = 0.000867995 Jy
! Component: 1250  -  total flux cleaned = 0.000929038 Jy
! Component: 1300  -  total flux cleaned = 0.000977507 Jy
! Component: 1350  -  total flux cleaned = 0.00104903 Jy
! Component: 1400  -  total flux cleaned = 0.00110789 Jy
! Component: 1450  -  total flux cleaned = 0.00113105 Jy
! Component: 1500  -  total flux cleaned = 0.00120015 Jy
! Component: 1550  -  total flux cleaned = 0.00124571 Jy
! Component: 1600  -  total flux cleaned = 0.00129071 Jy
! Component: 1650  -  total flux cleaned = 0.00127961 Jy
! Component: 1700  -  total flux cleaned = 0.00131267 Jy
! Component: 1750  -  total flux cleaned = 0.00132353 Jy
! Component: 1800  -  total flux cleaned = 0.00133421 Jy
! Component: 1850  -  total flux cleaned = 0.00132348 Jy
! Component: 1900  -  total flux cleaned = 0.00134477 Jy
! Component: 1950  -  total flux cleaned = 0.00136568 Jy
! Component: 2000  -  total flux cleaned = 0.0013655 Jy
! Component: 2050  -  total flux cleaned = 0.00136534 Jy
! Component: 2100  -  total flux cleaned = 0.00135526 Jy
! Component: 2150  -  total flux cleaned = 0.00136546 Jy
! Component: 2200  -  total flux cleaned = 0.0013854 Jy
! Component: 2250  -  total flux cleaned = 0.00135568 Jy
! Component: 2300  -  total flux cleaned = 0.00141475 Jy
! Component: 2350  -  total flux cleaned = 0.00138549 Jy
! Component: 2400  -  total flux cleaned = 0.00141456 Jy
! Component: 2450  -  total flux cleaned = 0.00139538 Jy
! Component: 2500  -  total flux cleaned = 0.00140498 Jy
! Component: 2550  -  total flux cleaned = 0.00140508 Jy
! Component: 2600  -  total flux cleaned = 0.00142382 Jy
! Component: 2650  -  total flux cleaned = 0.00146108 Jy
! Component: 2700  -  total flux cleaned = 0.00147958 Jy
! Component: 2750  -  total flux cleaned = 0.00146121 Jy
! Component: 2800  -  total flux cleaned = 0.00149773 Jy
! Component: 2850  -  total flux cleaned = 0.00151589 Jy
! Component: 2900  -  total flux cleaned = 0.00156089 Jy
! Component: 2950  -  total flux cleaned = 0.00154306 Jy
! Component: 3000  -  total flux cleaned = 0.00154309 Jy
! Component: 3050  -  total flux cleaned = 0.00152547 Jy
! Component: 3100  -  total flux cleaned = 0.00156937 Jy
! Component: 3150  -  total flux cleaned = 0.00156073 Jy
! Component: 3200  -  total flux cleaned = 0.00156071 Jy
! Component: 3250  -  total flux cleaned = 0.00156077 Jy
! Component: 3300  -  total flux cleaned = 0.00155225 Jy
! Component: 3350  -  total flux cleaned = 0.0015522 Jy
! Component: 3400  -  total flux cleaned = 0.00153524 Jy
! Component: 3450  -  total flux cleaned = 0.00150165 Jy
! Component: 3500  -  total flux cleaned = 0.0015017 Jy
! Component: 3550  -  total flux cleaned = 0.00153496 Jy
! Component: 3600  -  total flux cleaned = 0.00148536 Jy
! Component: 3650  -  total flux cleaned = 0.00151003 Jy
! Component: 3700  -  total flux cleaned = 0.00147734 Jy
! Component: 3750  -  total flux cleaned = 0.00149349 Jy
! Component: 3800  -  total flux cleaned = 0.00144498 Jy
! Component: 3850  -  total flux cleaned = 0.00145311 Jy
! Component: 3900  -  total flux cleaned = 0.00142908 Jy
! Component: 3950  -  total flux cleaned = 0.0014052 Jy
! Component: 4000  -  total flux cleaned = 0.00141313 Jy
! Component: 4050  -  total flux cleaned = 0.00138943 Jy
! Total flux subtracted in 4096 components = 0.00138945 Jy
! Clean residual min=-0.000484 max=0.000518 Jy/beam
! Clean residual mean=0.000000 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.122149 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 324 components and 0.122149 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2200-1632_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7724 x 1.795 at -2.698 degrees (North through East)
! Clean map  min=-0.00088492  max=0.10715 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2200-1632_X_map.fits
wmodel /image_prod/ug002_uva//J2200-1632_X_map.mod
! Writing 324 model components to file: /image_prod/ug002_uva//J2200-1632_X_map.mod
wobs   /image_prod/ug002_uva//J2200-1632_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2200-1632_X_uvs.fits
wwins  /image_prod/ug002_uva//J2200-1632_X_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J2200-1632_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.107147 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000127772 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.35775 0.35775 0.715499 1.431 2.862 5.724 11.448 22.896 45.792 91.5839
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.107 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  838.575 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2200-1632_X_dfm.log closed on Thu Mar  5 05:26:30 2020