! Started logfile: /image_prod/ug002_uva//J2159-2516_S_dfm.log on Thu Mar 5 05:25:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2159-2516_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2159-2516_S_uva.fits ! AN table 1: 30 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.986905 visibilities/baseline/integration-bin. ! Found source: J2159-2516 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 2487 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2159-2516_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.003016Jy sigma=6.218685 ! Fit after self-cal, rms=0.863605Jy sigma=5.290482 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.415 mas, bmaj=6.56 mas, bpa=-5.283 degrees ! Estimated noise=3.00242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113624 Jy ! Component: 100 - total flux cleaned = 0.138458 Jy ! Total flux subtracted in 100 components = 0.138458 Jy ! Clean residual min=-0.010746 max=0.013560 Jy/beam ! Clean residual mean=-0.000033 rms=0.002826 Jy/beam ! Combined flux in latest and established models = 0.138459 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.138459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087755Jy sigma=0.496766 ! Fit after self-cal, rms=0.087652Jy sigma=0.496063 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.741 mas, bmaj=7.222 mas, bpa=-6.631 degrees ! Estimated noise=2.38099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.007919 Jy ! Component: 100 - total flux cleaned = 0.0110157 Jy ! Component: 150 - total flux cleaned = 0.0111338 Jy ! Component: 200 - total flux cleaned = 0.0113199 Jy ! Total flux subtracted in 200 components = 0.0113199 Jy ! Clean residual min=-0.009958 max=0.012480 Jy/beam ! Clean residual mean=-0.000062 rms=0.002755 Jy/beam ! Combined flux in latest and established models = 0.149779 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.149779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087290Jy sigma=0.488642 ! Fit after self-cal, rms=0.087323Jy sigma=0.488553 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.741 x 7.222 at -6.631 degrees (North through East) ! Clean map min=-0.0096673 max=0.14435 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 0.94 HN 1.13 KP 0.91 ! MK 0.92 NL 0.97 OV 0.84 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.75 FD 0.99 HN 1.18 KP 0.91 ! MK 1.05 NL 1.12 OV 0.87 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 0.93 HN 1.07 KP 1.00 ! MK 0.98 NL 0.92 OV 0.88 SC 0.92 ! ! ! Fit before self-cal, rms=0.087323Jy sigma=0.488553 ! Fit after self-cal, rms=0.098373Jy sigma=0.460238 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=7.259 mas, bpa=-6.414 degrees ! Estimated noise=2.36443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128738 Jy ! Component: 100 - total flux cleaned = -0.000132099 Jy ! Component: 150 - total flux cleaned = -0.000347857 Jy ! Component: 200 - total flux cleaned = -0.000422566 Jy ! Total flux subtracted in 200 components = -0.000422566 Jy ! Clean residual min=-0.006924 max=0.007592 Jy/beam ! Clean residual mean=-0.000024 rms=0.001880 Jy/beam ! Combined flux in latest and established models = 0.149356 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.149356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098291Jy sigma=0.459936 ! Fit after self-cal, rms=0.098765Jy sigma=0.459517 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098765Jy sigma=0.459517 ! Fit after self-cal, rms=0.108668Jy sigma=0.450051 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=7.283 mas, bpa=-6.681 degrees ! Estimated noise=2.38438 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000724619 Jy ! Component: 100 - total flux cleaned = 0.000958903 Jy ! Component: 150 - total flux cleaned = 0.00114184 Jy ! Component: 200 - total flux cleaned = 0.00120137 Jy ! Total flux subtracted in 200 components = 0.00120137 Jy ! Clean residual min=-0.004744 max=0.006789 Jy/beam ! Clean residual mean=-0.000007 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 0.150557 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.150557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.108604Jy sigma=0.449903 ! Fit after self-cal, rms=0.108710Jy sigma=0.449814 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688344 Jy ! Component: 100 - total flux cleaned = 0.0103757 Jy ! Component: 150 - total flux cleaned = 0.011115 Jy ! Component: 200 - total flux cleaned = 0.0118016 Jy ! Total flux subtracted in 200 components = 0.0118016 Jy ! Clean residual min=-0.003669 max=0.003924 Jy/beam ! Clean residual mean=-0.000001 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.162359 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 69 components and 0.162359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.108144Jy sigma=0.445690 ! Fit after self-cal, rms=0.108149Jy sigma=0.445428 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.108149Jy sigma=0.445428 ! Fit after self-cal, rms=0.110292Jy sigma=0.443885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.734 mas, bmaj=7.309 mas, bpa=-6.773 degrees ! Estimated noise=2.36305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206988 Jy ! Component: 100 - total flux cleaned = 0.00246476 Jy ! Component: 150 - total flux cleaned = 0.0029215 Jy ! Component: 200 - total flux cleaned = 0.00314007 Jy ! Total flux subtracted in 200 components = 0.00314007 Jy ! Clean residual min=-0.003336 max=0.003392 Jy/beam ! Clean residual mean=-0.000001 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.165499 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 0.165499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.110157Jy sigma=0.443383 ! Fit after self-cal, rms=0.110166Jy sigma=0.443290 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000516511 Jy ! Component: 100 - total flux cleaned = 0.000683417 Jy ! Component: 150 - total flux cleaned = 0.000794664 Jy ! Component: 200 - total flux cleaned = 0.000862188 Jy ! Total flux subtracted in 200 components = 0.000862188 Jy ! Clean residual min=-0.003322 max=0.003399 Jy/beam ! Clean residual mean=-0.000000 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.166361 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 94 components and 0.166361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.110100Jy sigma=0.443179 ! Fit after self-cal, rms=0.110092Jy sigma=0.443164 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.110092Jy sigma=0.443164 ! Fit after self-cal, rms=0.109614Jy sigma=0.443051 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.46 mas, bmaj=14.32 mas, bpa=-2.877 degrees ! Estimated noise=3.1682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000957676 Jy ! Component: 100 - total flux cleaned = 0.00133828 Jy ! Component: 150 - total flux cleaned = 0.00154741 Jy ! Component: 200 - total flux cleaned = 0.00166037 Jy ! Total flux subtracted in 200 components = 0.00166037 Jy ! Clean residual min=-0.003804 max=0.004126 Jy/beam ! Clean residual mean=0.000002 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.168021 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 105 components and 0.168022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.109584Jy sigma=0.443045 ! Fit after self-cal, rms=0.109570Jy sigma=0.443013 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119789 Jy ! Component: 100 - total flux cleaned = 0.000234176 Jy ! Component: 150 - total flux cleaned = 0.000342853 Jy ! Component: 200 - total flux cleaned = 0.00038534 Jy ! Total flux subtracted in 200 components = 0.00038534 Jy ! Clean residual min=-0.003824 max=0.004089 Jy/beam ! Clean residual mean=0.000004 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.168407 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 111 components and 0.168407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.109563Jy sigma=0.443055 ! Fit after self-cal, rms=0.109550Jy sigma=0.443047 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=7.319 mas, bpa=-6.843 degrees ! Estimated noise=2.35253 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.739 x 7.319 at -6.843 degrees (North through East) ! Clean map min=-0.0035826 max=0.14496 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.415 mas, bmaj=6.629 mas, bpa=-5.365 degrees ! Estimated noise=2.93308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110866 Jy ! Component: 100 - total flux cleaned = 0.135149 Jy ! Component: 150 - total flux cleaned = 0.143119 Jy ! Component: 200 - total flux cleaned = 0.148301 Jy ! Total flux subtracted in 200 components = 0.148301 Jy ! Clean residual min=-0.004470 max=0.004269 Jy/beam ! Clean residual mean=-0.000003 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.148301 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.148301 Jy ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=7.319 mas, bpa=-6.843 degrees ! Estimated noise=2.35253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00559989 Jy ! Component: 100 - total flux cleaned = 0.00955187 Jy ! Component: 150 - total flux cleaned = 0.0126156 Jy ! Component: 200 - total flux cleaned = 0.0147688 Jy ! Total flux subtracted in 200 components = 0.0147688 Jy ! Clean residual min=-0.004123 max=0.003396 Jy/beam ! Clean residual mean=-0.000002 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.16307 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 43 components and 0.16307 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.46 mas, bmaj=14.32 mas, bpa=-2.877 degrees ! Estimated noise=3.1682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281744 Jy ! Component: 100 - total flux cleaned = 0.00405935 Jy ! Component: 150 - total flux cleaned = 0.004469 Jy ! Component: 200 - total flux cleaned = 0.0046809 Jy ! Total flux subtracted in 200 components = 0.0046809 Jy ! Clean residual min=-0.003747 max=0.003947 Jy/beam ! Clean residual mean=0.000003 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.167751 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183842 Jy ! Component: 100 - total flux cleaned = 0.000381184 Jy ! Component: 150 - total flux cleaned = 0.000527527 Jy ! Component: 200 - total flux cleaned = 0.000683903 Jy ! Total flux subtracted in 200 components = 0.000683903 Jy ! Clean residual min=-0.003712 max=0.004052 Jy/beam ! Clean residual mean=0.000003 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.168435 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 75 components and 0.168435 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=7.319 mas, bpa=-6.843 degrees ! Estimated noise=2.35253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.74102e-05 Jy ! Component: 100 - total flux cleaned = -0.000173716 Jy ! Component: 150 - total flux cleaned = -0.000223578 Jy ! Component: 200 - total flux cleaned = -0.000317948 Jy ! Total flux subtracted in 200 components = -0.000317948 Jy ! Clean residual min=-0.003617 max=0.003363 Jy/beam ! Clean residual mean=0.000000 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.168117 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 95 components and 0.168117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.109612Jy sigma=0.443387 ! Fit after self-cal, rms=0.109617Jy sigma=0.443309 wmodel J2159-2516_S_map.mod ! Writing 95 model components to file: J2159-2516_S_map.mod wobs J2159-2516_S_uvs.fits ! Writing UV FITS file: J2159-2516_S_uvs.fits wwins J2159-2516_S_map.win ! wwins: Wrote 2 windows to J2159-2516_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010946 Jy ! Component: 100 - total flux cleaned = -0.00167473 Jy ! Component: 150 - total flux cleaned = -0.00173017 Jy ! Component: 200 - total flux cleaned = -0.00173014 Jy ! Component: 250 - total flux cleaned = -0.00158313 Jy ! Component: 300 - total flux cleaned = -0.00158283 Jy ! Component: 350 - total flux cleaned = -0.00162793 Jy ! Component: 400 - total flux cleaned = -0.00140064 Jy ! Component: 450 - total flux cleaned = -0.00126941 Jy ! Component: 500 - total flux cleaned = -0.00114017 Jy ! Component: 550 - total flux cleaned = -0.00109721 Jy ! Component: 600 - total flux cleaned = -0.00093291 Jy ! Component: 650 - total flux cleaned = -0.000933348 Jy ! Component: 700 - total flux cleaned = -0.00101138 Jy ! Component: 750 - total flux cleaned = -0.000972814 Jy ! Component: 800 - total flux cleaned = -0.00101014 Jy ! Component: 850 - total flux cleaned = -0.001084 Jy ! Component: 900 - total flux cleaned = -0.00112068 Jy ! Component: 950 - total flux cleaned = -0.00126325 Jy ! Component: 1000 - total flux cleaned = -0.00129858 Jy ! Component: 1050 - total flux cleaned = -0.00147098 Jy ! Component: 1100 - total flux cleaned = -0.00160651 Jy ! Component: 1150 - total flux cleaned = -0.00167196 Jy ! Component: 1200 - total flux cleaned = -0.00167146 Jy ! Component: 1250 - total flux cleaned = -0.00176822 Jy ! Component: 1300 - total flux cleaned = -0.00192725 Jy ! Component: 1350 - total flux cleaned = -0.00199022 Jy ! Component: 1400 - total flux cleaned = -0.00205219 Jy ! Component: 1450 - total flux cleaned = -0.00205198 Jy ! Component: 1500 - total flux cleaned = -0.00202246 Jy ! Component: 1550 - total flux cleaned = -0.00208188 Jy ! Component: 1600 - total flux cleaned = -0.00216962 Jy ! Component: 1650 - total flux cleaned = -0.00222739 Jy ! Component: 1700 - total flux cleaned = -0.00222724 Jy ! Component: 1750 - total flux cleaned = -0.00228305 Jy ! Component: 1800 - total flux cleaned = -0.00222796 Jy ! Component: 1850 - total flux cleaned = -0.00220051 Jy ! Component: 1900 - total flux cleaned = -0.00217354 Jy ! Component: 1950 - total flux cleaned = -0.00212048 Jy ! Component: 2000 - total flux cleaned = -0.00217337 Jy ! Component: 2050 - total flux cleaned = -0.00217318 Jy ! Component: 2100 - total flux cleaned = -0.00207055 Jy ! Component: 2150 - total flux cleaned = -0.00212162 Jy ! Component: 2200 - total flux cleaned = -0.00207127 Jy ! Component: 2250 - total flux cleaned = -0.00204678 Jy ! Component: 2300 - total flux cleaned = -0.00202209 Jy ! Component: 2350 - total flux cleaned = -0.00199799 Jy ! Component: 2400 - total flux cleaned = -0.001998 Jy ! Component: 2450 - total flux cleaned = -0.00190227 Jy ! Component: 2500 - total flux cleaned = -0.00190261 Jy ! Component: 2550 - total flux cleaned = -0.00194958 Jy ! Component: 2600 - total flux cleaned = -0.00194931 Jy ! Component: 2650 - total flux cleaned = -0.0019491 Jy ! Component: 2700 - total flux cleaned = -0.00199475 Jy ! Component: 2750 - total flux cleaned = -0.00192652 Jy ! Component: 2800 - total flux cleaned = -0.00203887 Jy ! Component: 2850 - total flux cleaned = -0.00206114 Jy ! Component: 2900 - total flux cleaned = -0.00210553 Jy ! Component: 2950 - total flux cleaned = -0.00206166 Jy ! Component: 3000 - total flux cleaned = -0.00214874 Jy ! Component: 3050 - total flux cleaned = -0.00219188 Jy ! Component: 3100 - total flux cleaned = -0.00221332 Jy ! Component: 3150 - total flux cleaned = -0.00223443 Jy ! Component: 3200 - total flux cleaned = -0.00236129 Jy ! Component: 3250 - total flux cleaned = -0.00240324 Jy ! Component: 3300 - total flux cleaned = -0.00238241 Jy ! Component: 3350 - total flux cleaned = -0.00246534 Jy ! Component: 3400 - total flux cleaned = -0.00248615 Jy ! Component: 3450 - total flux cleaned = -0.00254761 Jy ! Component: 3500 - total flux cleaned = -0.00258841 Jy ! Component: 3550 - total flux cleaned = -0.0026891 Jy ! Component: 3600 - total flux cleaned = -0.00268909 Jy ! Component: 3650 - total flux cleaned = -0.00264919 Jy ! Component: 3700 - total flux cleaned = -0.00266906 Jy ! Component: 3750 - total flux cleaned = -0.00268877 Jy ! Component: 3800 - total flux cleaned = -0.00270831 Jy ! Component: 3850 - total flux cleaned = -0.00265018 Jy ! Component: 3900 - total flux cleaned = -0.00272746 Jy ! Component: 3950 - total flux cleaned = -0.00268893 Jy ! Component: 4000 - total flux cleaned = -0.0026507 Jy ! Component: 4050 - total flux cleaned = -0.00257446 Jy ! Total flux subtracted in 4096 components = -0.00253673 Jy ! Clean residual min=-0.001335 max=0.001039 Jy/beam ! Clean residual mean=0.000002 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.16558 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 374 components and 0.16558 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2159-2516_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.739 x 7.319 at -6.843 degrees (North through East) ! Clean map min=-0.0022972 max=0.14404 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2159-2516_S_map.fits wmodel /image_prod/ug002_uva//J2159-2516_S_map.mod ! Writing 374 model components to file: /image_prod/ug002_uva//J2159-2516_S_map.mod wobs /image_prod/ug002_uva//J2159-2516_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2159-2516_S_uvs.fits wwins /image_prod/ug002_uva//J2159-2516_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J2159-2516_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.144042 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000328617 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.684418 0.684418 1.36884 2.73767 5.47534 10.9507 21.9014 43.8027 87.6055 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.144 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 438.328 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2159-2516_S_dfm.log closed on Thu Mar 5 05:25:51 2020