! Started logfile: /image_prod/ug002_uva//J2156-0037_S_dfm.log on Thu Mar 5 05:24:55 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2156-0037_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2156-0037_S_uva.fits ! AN table 1: 45 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.953704 visibilities/baseline/integration-bin. ! Found source: J2156-0037 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4635 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2156-0037_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.077517Jy sigma=7.580294 ! Fit after self-cal, rms=0.602017Jy sigma=4.296736 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=7.116 mas, bpa=-6.003 degrees ! Estimated noise=1.88301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.314618 Jy ! Component: 100 - total flux cleaned = 0.383596 Jy ! Total flux subtracted in 100 components = 0.383596 Jy ! Clean residual min=-0.014581 max=0.021546 Jy/beam ! Clean residual mean=0.000001 rms=0.003560 Jy/beam ! Combined flux in latest and established models = 0.383596 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.383596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104019Jy sigma=0.604163 ! Fit after self-cal, rms=0.104017Jy sigma=0.604142 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=7.765 mas, bpa=-5.072 degrees ! Estimated noise=1.52119 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191893 Jy ! Component: 100 - total flux cleaned = 0.0201031 Jy ! Component: 150 - total flux cleaned = 0.0198501 Jy ! Component: 200 - total flux cleaned = 0.0194339 Jy ! Total flux subtracted in 200 components = 0.0194339 Jy ! Clean residual min=-0.016251 max=0.011988 Jy/beam ! Clean residual mean=0.000001 rms=0.003200 Jy/beam ! Combined flux in latest and established models = 0.40303 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 13 components and 0.40303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099192Jy sigma=0.579260 ! Fit after self-cal, rms=0.099173Jy sigma=0.579238 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 7.765 at -5.072 degrees (North through East) ! Clean map min=-0.015883 max=0.40247 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.19 HN 1.02 KP 1.02 ! LA 1.03 MK 1.01 NL 1.01 OV 0.82 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.04 HN 1.04 KP 1.06 ! LA 1.02 MK 1.01 NL 0.93 OV 0.83 ! SC 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 1.05 KP 1.03 ! LA 1.01 MK 0.98 NL 0.99 OV 0.90 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.099173Jy sigma=0.579238 ! Fit after self-cal, rms=0.080646Jy sigma=0.481874 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.718 mas, bpa=-4.504 degrees ! Estimated noise=1.51809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016611 Jy ! Component: 100 - total flux cleaned = 0.00180219 Jy ! Component: 150 - total flux cleaned = 0.00169674 Jy ! Component: 200 - total flux cleaned = 0.00147413 Jy ! Total flux subtracted in 200 components = 0.00147413 Jy ! Clean residual min=-0.007318 max=0.005703 Jy/beam ! Clean residual mean=0.000001 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.404504 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.404504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080469Jy sigma=0.481500 ! Fit after self-cal, rms=0.080516Jy sigma=0.481325 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080516Jy sigma=0.481325 ! Fit after self-cal, rms=0.075891Jy sigma=0.445247 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=7.724 mas, bpa=-4.603 degrees ! Estimated noise=1.53099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299263 Jy ! Component: 100 - total flux cleaned = 0.00299669 Jy ! Component: 150 - total flux cleaned = 0.00293583 Jy ! Component: 200 - total flux cleaned = 0.00284641 Jy ! Total flux subtracted in 200 components = 0.00284641 Jy ! Clean residual min=-0.004646 max=0.005060 Jy/beam ! Clean residual mean=-0.000003 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.407351 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.407351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075597Jy sigma=0.444617 ! Fit after self-cal, rms=0.075599Jy sigma=0.444586 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (96.5, 89). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181102 Jy ! Component: 100 - total flux cleaned = 0.0021418 Jy ! Component: 150 - total flux cleaned = 0.00232146 Jy ! Component: 200 - total flux cleaned = 0.00217993 Jy ! Total flux subtracted in 200 components = 0.00217993 Jy ! Clean residual min=-0.004322 max=0.004535 Jy/beam ! Clean residual mean=-0.000003 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.409531 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 52 components and 0.409531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075160Jy sigma=0.442381 ! Fit after self-cal, rms=0.075131Jy sigma=0.442127 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075131Jy sigma=0.442127 ! Fit after self-cal, rms=0.068262Jy sigma=0.412043 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=7.719 mas, bpa=-4.563 degrees ! Estimated noise=1.52928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000721031 Jy ! Component: 100 - total flux cleaned = 0.000910344 Jy ! Component: 150 - total flux cleaned = 0.001048 Jy ! Component: 200 - total flux cleaned = 0.00114247 Jy ! Total flux subtracted in 200 components = 0.00114247 Jy ! Clean residual min=-0.003497 max=0.002806 Jy/beam ! Clean residual mean=-0.000001 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.410673 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 77 components and 0.410673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068220Jy sigma=0.411812 ! Fit after self-cal, rms=0.068201Jy sigma=0.411764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.13615e-05 Jy ! Component: 100 - total flux cleaned = 0.000135363 Jy ! Component: 150 - total flux cleaned = 0.00016068 Jy ! Component: 200 - total flux cleaned = 0.00015943 Jy ! Total flux subtracted in 200 components = 0.00015943 Jy ! Clean residual min=-0.003478 max=0.002742 Jy/beam ! Clean residual mean=-0.000001 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.410833 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 0.410833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068178Jy sigma=0.411630 ! Fit after self-cal, rms=0.068177Jy sigma=0.411626 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068177Jy sigma=0.411626 ! Fit after self-cal, rms=0.068162Jy sigma=0.411596 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.09 mas, bmaj=12.02 mas, bpa=-0.5336 degrees ! Estimated noise=1.92522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010635 Jy ! Component: 100 - total flux cleaned = 0.0011661 Jy ! Component: 150 - total flux cleaned = 0.00131172 Jy ! Component: 200 - total flux cleaned = 0.0014423 Jy ! Total flux subtracted in 200 components = 0.0014423 Jy ! Clean residual min=-0.003172 max=0.002417 Jy/beam ! Clean residual mean=-0.000003 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.412275 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 95 components and 0.412275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068167Jy sigma=0.411564 ! Fit after self-cal, rms=0.068159Jy sigma=0.411514 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000381057 Jy ! Component: 100 - total flux cleaned = 0.000477959 Jy ! Component: 150 - total flux cleaned = 0.000521016 Jy ! Component: 200 - total flux cleaned = 0.000580253 Jy ! Total flux subtracted in 200 components = 0.000580253 Jy ! Clean residual min=-0.003039 max=0.002416 Jy/beam ! Clean residual mean=-0.000002 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.412855 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 99 components and 0.412855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068167Jy sigma=0.411552 ! Fit after self-cal, rms=0.068164Jy sigma=0.411541 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.714 mas, bpa=-4.536 degrees ! Estimated noise=1.52961 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.714 at -4.536 degrees (North through East) ! Clean map min=-0.0030516 max=0.4054 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=7.07 mas, bpa=-5.535 degrees ! Estimated noise=1.88392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.314762 Jy ! Component: 100 - total flux cleaned = 0.383582 Jy ! Component: 150 - total flux cleaned = 0.404294 Jy ! Component: 200 - total flux cleaned = 0.409009 Jy ! Total flux subtracted in 200 components = 0.409009 Jy ! Clean residual min=-0.004735 max=0.004752 Jy/beam ! Clean residual mean=0.000001 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.409009 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.409009 Jy ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.714 mas, bpa=-4.536 degrees ! Estimated noise=1.52961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145646 Jy ! Component: 100 - total flux cleaned = 0.00207009 Jy ! Component: 150 - total flux cleaned = 0.00256075 Jy ! Component: 200 - total flux cleaned = 0.00335328 Jy ! Total flux subtracted in 200 components = 0.00335328 Jy ! Clean residual min=-0.002964 max=0.002855 Jy/beam ! Clean residual mean=-0.000001 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.412362 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.412362 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.09 mas, bmaj=12.02 mas, bpa=-0.5336 degrees ! Estimated noise=1.92522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000742661 Jy ! Component: 100 - total flux cleaned = 0.00125955 Jy ! Component: 150 - total flux cleaned = 0.00161606 Jy ! Component: 200 - total flux cleaned = 0.00189465 Jy ! Total flux subtracted in 200 components = 0.00189465 Jy ! Clean residual min=-0.002808 max=0.002452 Jy/beam ! Clean residual mean=-0.000002 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.414257 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252671 Jy ! Component: 100 - total flux cleaned = 0.000385331 Jy ! Component: 150 - total flux cleaned = 0.000386257 Jy ! Component: 200 - total flux cleaned = 0.00041648 Jy ! Total flux subtracted in 200 components = 0.00041648 Jy ! Clean residual min=-0.002730 max=0.002464 Jy/beam ! Clean residual mean=-0.000002 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.414674 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 62 components and 0.414674 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.714 mas, bpa=-4.536 degrees ! Estimated noise=1.52961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104424 Jy ! Component: 100 - total flux cleaned = 0.000336844 Jy ! Component: 150 - total flux cleaned = 0.000505968 Jy ! Component: 200 - total flux cleaned = 0.000660288 Jy ! Total flux subtracted in 200 components = 0.000660288 Jy ! Clean residual min=-0.002901 max=0.002725 Jy/beam ! Clean residual mean=-0.000001 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.415334 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 0.415334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068161Jy sigma=0.411416 ! Fit after self-cal, rms=0.068154Jy sigma=0.411345 wmodel J2156-0037_S_map.mod ! Writing 78 model components to file: J2156-0037_S_map.mod wobs J2156-0037_S_uvs.fits ! Writing UV FITS file: J2156-0037_S_uvs.fits wwins J2156-0037_S_map.win ! wwins: Wrote 3 windows to J2156-0037_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000696842 Jy ! Component: 100 - total flux cleaned = -0.000834807 Jy ! Component: 150 - total flux cleaned = -0.00118619 Jy ! Component: 200 - total flux cleaned = -0.00131197 Jy ! Component: 250 - total flux cleaned = -0.00127237 Jy ! Component: 300 - total flux cleaned = -0.0013124 Jy ! Component: 350 - total flux cleaned = -0.00142554 Jy ! Component: 400 - total flux cleaned = -0.00146222 Jy ! Component: 450 - total flux cleaned = -0.00157027 Jy ! Component: 500 - total flux cleaned = -0.00171148 Jy ! Component: 550 - total flux cleaned = -0.00191829 Jy ! Component: 600 - total flux cleaned = -0.00208711 Jy ! Component: 650 - total flux cleaned = -0.00221951 Jy ! Component: 700 - total flux cleaned = -0.00234995 Jy ! Component: 750 - total flux cleaned = -0.0025086 Jy ! Component: 800 - total flux cleaned = -0.00257079 Jy ! Component: 850 - total flux cleaned = -0.00263247 Jy ! Component: 900 - total flux cleaned = -0.00275381 Jy ! Component: 950 - total flux cleaned = -0.00281307 Jy ! Component: 1000 - total flux cleaned = -0.00284233 Jy ! Component: 1050 - total flux cleaned = -0.00287111 Jy ! Component: 1100 - total flux cleaned = -0.00289957 Jy ! Component: 1150 - total flux cleaned = -0.00298244 Jy ! Component: 1200 - total flux cleaned = -0.00303724 Jy ! Component: 1250 - total flux cleaned = -0.0031181 Jy ! Component: 1300 - total flux cleaned = -0.003171 Jy ! Component: 1350 - total flux cleaned = -0.00322313 Jy ! Component: 1400 - total flux cleaned = -0.00322335 Jy ! Component: 1450 - total flux cleaned = -0.00327445 Jy ! Component: 1500 - total flux cleaned = -0.00329947 Jy ! Component: 1550 - total flux cleaned = -0.00332399 Jy ! Component: 1600 - total flux cleaned = -0.00334839 Jy ! Component: 1650 - total flux cleaned = -0.00329971 Jy ! Component: 1700 - total flux cleaned = -0.0033238 Jy ! Component: 1750 - total flux cleaned = -0.00327662 Jy ! Component: 1800 - total flux cleaned = -0.00320713 Jy ! Component: 1850 - total flux cleaned = -0.00320745 Jy ! Component: 1900 - total flux cleaned = -0.00320729 Jy ! Component: 1950 - total flux cleaned = -0.00320731 Jy ! Component: 2000 - total flux cleaned = -0.00316275 Jy ! Component: 2050 - total flux cleaned = -0.00314107 Jy ! Component: 2100 - total flux cleaned = -0.00314186 Jy ! Component: 2150 - total flux cleaned = -0.00322749 Jy ! Component: 2200 - total flux cleaned = -0.00326963 Jy ! Component: 2250 - total flux cleaned = -0.0032276 Jy ! Component: 2300 - total flux cleaned = -0.00324868 Jy ! Component: 2350 - total flux cleaned = -0.00326917 Jy ! Component: 2400 - total flux cleaned = -0.00335017 Jy ! Component: 2450 - total flux cleaned = -0.00328941 Jy ! Component: 2500 - total flux cleaned = -0.00326953 Jy ! Component: 2550 - total flux cleaned = -0.00330936 Jy ! Component: 2600 - total flux cleaned = -0.00327015 Jy ! Component: 2650 - total flux cleaned = -0.00330913 Jy ! Component: 2700 - total flux cleaned = -0.00330938 Jy ! Component: 2750 - total flux cleaned = -0.00336682 Jy ! Component: 2800 - total flux cleaned = -0.00329078 Jy ! Component: 2850 - total flux cleaned = -0.00338501 Jy ! Component: 2900 - total flux cleaned = -0.00336611 Jy ! Component: 2950 - total flux cleaned = -0.0033105 Jy ! Component: 3000 - total flux cleaned = -0.00334746 Jy ! Component: 3050 - total flux cleaned = -0.0032746 Jy ! Component: 3100 - total flux cleaned = -0.00332894 Jy ! Component: 3150 - total flux cleaned = -0.00332909 Jy ! Component: 3200 - total flux cleaned = -0.00340022 Jy ! Component: 3250 - total flux cleaned = -0.00341775 Jy ! Component: 3300 - total flux cleaned = -0.00338254 Jy ! Component: 3350 - total flux cleaned = -0.00333049 Jy ! Component: 3400 - total flux cleaned = -0.00341712 Jy ! Component: 3450 - total flux cleaned = -0.00334829 Jy ! Component: 3500 - total flux cleaned = -0.00333127 Jy ! Component: 3550 - total flux cleaned = -0.00333128 Jy ! Component: 3600 - total flux cleaned = -0.00338185 Jy ! Component: 3650 - total flux cleaned = -0.00336504 Jy ! Component: 3700 - total flux cleaned = -0.00343149 Jy ! Component: 3750 - total flux cleaned = -0.00343149 Jy ! Component: 3800 - total flux cleaned = -0.00341508 Jy ! Component: 3850 - total flux cleaned = -0.00348028 Jy ! Component: 3900 - total flux cleaned = -0.00351251 Jy ! Component: 3950 - total flux cleaned = -0.00354463 Jy ! Component: 4000 - total flux cleaned = -0.0034809 Jy ! Component: 4050 - total flux cleaned = -0.00354431 Jy ! Total flux subtracted in 4096 components = -0.00346543 Jy ! Clean residual min=-0.000925 max=0.000856 Jy/beam ! Clean residual mean=-0.000000 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.411868 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 375 components and 0.411868 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2156-0037_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.714 at -4.536 degrees (North through East) ! Clean map min=-0.0021275 max=0.40436 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2156-0037_S_map.fits wmodel /image_prod/ug002_uva//J2156-0037_S_map.mod ! Writing 375 model components to file: /image_prod/ug002_uva//J2156-0037_S_map.mod wobs /image_prod/ug002_uva//J2156-0037_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2156-0037_S_uvs.fits wwins /image_prod/ug002_uva//J2156-0037_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2156-0037_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.404358 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000282277 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.209426 0.209426 0.418852 0.837704 1.67541 3.35082 6.70164 13.4033 26.8065 53.6131 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.404 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1432.49 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2156-0037_S_dfm.log closed on Thu Mar 5 05:24:59 2020