! Started logfile: /image_prod/ug002_uva//J2155+1914_S_dfm.log on Thu Mar  5 05:24:31 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2155+1914_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2155+1914_S_uva.fits
! AN table 1: 90 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.989198 visibilities/baseline/integration-bin.
! Found source: J2155+1914
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 9615 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2155+1914_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.009774Jy  sigma=9.091662
! Fit after  self-cal, rms=0.910299Jy  sigma=8.212289
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.175 mas, bmaj=10.1 mas, bpa=-20.37 degrees
! Estimated noise=1.17146 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0711089 Jy
! Component: 100  -  total flux cleaned = 0.0866284 Jy
! Total flux subtracted in 100 components = 0.0866284 Jy
! Clean residual min=-0.003501 max=0.005313 Jy/beam
! Clean residual mean=0.000010 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 0.0866284 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0866284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058744Jy  sigma=0.480529
! Fit after  self-cal, rms=0.058620Jy  sigma=0.479620
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.851 mas, bmaj=10.72 mas, bpa=-19.98 degrees
! Estimated noise=0.823357 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00469458 Jy
! Component: 100  -  total flux cleaned = 0.00663817 Jy
! Component: 150  -  total flux cleaned = 0.00715208 Jy
! Component: 200  -  total flux cleaned = 0.00742228 Jy
! Total flux subtracted in 200 components = 0.00742228 Jy
! Clean residual min=-0.002917 max=0.004189 Jy/beam
! Clean residual mean=0.000010 rms=0.000933 Jy/beam
! Combined flux in latest and established models = 0.0940507 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.0940507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058212Jy  sigma=0.476558
! Fit after  self-cal, rms=0.058214Jy  sigma=0.476482
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.851 x 10.72 at -19.98 degrees (North through East)
! Clean map  min=-0.0029228  max=0.091112 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.11     HN        0.98     KP        0.95     
!   LA        0.95     MK        1.01     NL        0.99     OV        0.98     
!   PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.11     HN        1.01     KP        0.97     
!   LA        1.00     MK        0.94     NL        1.05     OV        0.91     
!   PT        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.16     HN        0.96     KP        0.96     
!   LA        1.00     MK        0.98     NL        1.13     OV        0.96     
!   PT        0.99     
! 
! 
! Fit before self-cal, rms=0.058214Jy  sigma=0.476482
! Fit after  self-cal, rms=0.057520Jy  sigma=0.471721
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.828 mas, bmaj=10.73 mas, bpa=-20 degrees
! Estimated noise=0.820273 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.04252e-05 Jy
! Component: 100  -  total flux cleaned = -8.13089e-05 Jy
! Component: 150  -  total flux cleaned = -5.78147e-05 Jy
! Component: 200  -  total flux cleaned = -1.38392e-05 Jy
! Total flux subtracted in 200 components = -1.38392e-05 Jy
! Clean residual min=-0.002909 max=0.003173 Jy/beam
! Clean residual mean=0.000003 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.0940368 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.0940368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057475Jy  sigma=0.471474
! Fit after  self-cal, rms=0.057472Jy  sigma=0.471340
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057472Jy  sigma=0.471340
! Fit after  self-cal, rms=0.058322Jy  sigma=0.456723
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.832 mas, bmaj=10.72 mas, bpa=-19.92 degrees
! Estimated noise=0.822103 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000668871 Jy
! Component: 100  -  total flux cleaned = 0.000846974 Jy
! Component: 150  -  total flux cleaned = 0.000886565 Jy
! Component: 200  -  total flux cleaned = 0.000921197 Jy
! Total flux subtracted in 200 components = 0.000921197 Jy
! Clean residual min=-0.001334 max=0.001416 Jy/beam
! Clean residual mean=0.000005 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.094958 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 43 components and 0.094958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058311Jy  sigma=0.456634
! Fit after  self-cal, rms=0.058420Jy  sigma=0.456334
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (34.5, -75).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000955635 Jy
! Component: 100  -  total flux cleaned = 0.000895074 Jy
! Component: 150  -  total flux cleaned = 0.000761449 Jy
! Component: 200  -  total flux cleaned = 0.000629289 Jy
! Total flux subtracted in 200 components = 0.000629289 Jy
! Clean residual min=-0.001181 max=0.001239 Jy/beam
! Clean residual mean=0.000003 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.0955873 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 60 components and 0.0955873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058381Jy  sigma=0.455991
! Fit after  self-cal, rms=0.058379Jy  sigma=0.455974
! Inverting map 
! Added new window around map position (-12, -111.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000758751 Jy
! Component: 100  -  total flux cleaned = 0.000788779 Jy
! Component: 150  -  total flux cleaned = 0.000892004 Jy
! Component: 200  -  total flux cleaned = 0.000891631 Jy
! Total flux subtracted in 200 components = 0.000891631 Jy
! Clean residual min=-0.001129 max=0.001198 Jy/beam
! Clean residual mean=0.000003 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0964789 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 81 components and 0.096479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058352Jy  sigma=0.455723
! Fit after  self-cal, rms=0.058351Jy  sigma=0.455705
! Inverting map 
! Added new window around map position (69, 100).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000280812 Jy
! Component: 100  -  total flux cleaned = 0.000425766 Jy
! Component: 150  -  total flux cleaned = 0.000496926 Jy
! Component: 200  -  total flux cleaned = 0.000559881 Jy
! Total flux subtracted in 200 components = 0.000559881 Jy
! Clean residual min=-0.000983 max=0.000972 Jy/beam
! Clean residual mean=0.000003 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.0970388 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 101 components and 0.0970388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058322Jy  sigma=0.455423
! Fit after  self-cal, rms=0.058323Jy  sigma=0.455410
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058323Jy  sigma=0.455410
! Fit after  self-cal, rms=0.058214Jy  sigma=0.455339
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.821 mas, bmaj=10.7 mas, bpa=-19.91 degrees
! Estimated noise=0.821228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211699 Jy
! Component: 100  -  total flux cleaned = 0.000293897 Jy
! Component: 150  -  total flux cleaned = 0.000294337 Jy
! Component: 200  -  total flux cleaned = 0.00029441 Jy
! Total flux subtracted in 200 components = 0.00029441 Jy
! Clean residual min=-0.000939 max=0.000920 Jy/beam
! Clean residual mean=0.000002 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.0973332 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 119 components and 0.0973332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058202Jy  sigma=0.455223
! Fit after  self-cal, rms=0.058199Jy  sigma=0.455219
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.23728e-05 Jy
! Component: 100  -  total flux cleaned = 1.95618e-05 Jy
! Component: 150  -  total flux cleaned = 1.98824e-05 Jy
! Component: 200  -  total flux cleaned = 1.98686e-05 Jy
! Total flux subtracted in 200 components = 1.98686e-05 Jy
! Clean residual min=-0.000910 max=0.000884 Jy/beam
! Clean residual mean=0.000002 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.0973531 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 133 components and 0.0973531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058191Jy  sigma=0.455150
! Fit after  self-cal, rms=0.058191Jy  sigma=0.455149
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058191Jy  sigma=0.455149
! Fit after  self-cal, rms=0.058131Jy  sigma=0.455141
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.015 mas, bmaj=11.99 mas, bpa=-16.99 degrees
! Estimated noise=0.950283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.64004e-05 Jy
! Component: 100  -  total flux cleaned = -0.000137658 Jy
! Component: 150  -  total flux cleaned = -0.000149256 Jy
! Component: 200  -  total flux cleaned = -0.000159954 Jy
! Total flux subtracted in 200 components = -0.000159954 Jy
! Clean residual min=-0.000852 max=0.000927 Jy/beam
! Clean residual mean=0.000004 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.0971931 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 154 components and 0.0971931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058126Jy  sigma=0.455112
! Fit after  self-cal, rms=0.058124Jy  sigma=0.455110
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.31987e-05 Jy
! Component: 100  -  total flux cleaned = -2.34701e-05 Jy
! Component: 150  -  total flux cleaned = -5.35585e-06 Jy
! Component: 200  -  total flux cleaned = 1.22771e-05 Jy
! Total flux subtracted in 200 components = 1.22771e-05 Jy
! Clean residual min=-0.000845 max=0.000927 Jy/beam
! Clean residual mean=0.000004 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0972054 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 166 components and 0.0972054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058121Jy  sigma=0.455098
! Fit after  self-cal, rms=0.058121Jy  sigma=0.455097
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.82 mas, bmaj=10.69 mas, bpa=-19.9 degrees
! Estimated noise=0.821138 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.82 x 10.69 at -19.9 degrees (North through East)
! Clean map  min=-0.00099214  max=0.091023 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.152 mas, bmaj=10.06 mas, bpa=-20.19 degrees
! Estimated noise=1.15945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0704206 Jy
! Component: 100  -  total flux cleaned = 0.0859298 Jy
! Component: 150  -  total flux cleaned = 0.0911925 Jy
! Component: 200  -  total flux cleaned = 0.093641 Jy
! Total flux subtracted in 200 components = 0.093641 Jy
! Clean residual min=-0.001948 max=0.001947 Jy/beam
! Clean residual mean=0.000003 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.093641 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.093641 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.82 mas, bmaj=10.69 mas, bpa=-19.9 degrees
! Estimated noise=0.821138 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161629 Jy
! Component: 100  -  total flux cleaned = 0.00211552 Jy
! Component: 150  -  total flux cleaned = 0.00248611 Jy
! Component: 200  -  total flux cleaned = 0.00281079 Jy
! Total flux subtracted in 200 components = 0.00281079 Jy
! Clean residual min=-0.001155 max=0.001173 Jy/beam
! Clean residual mean=0.000002 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.0964518 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 47 components and 0.0964518 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.015 mas, bmaj=11.99 mas, bpa=-16.99 degrees
! Estimated noise=0.950283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000500068 Jy
! Component: 100  -  total flux cleaned = 0.000833965 Jy
! Component: 150  -  total flux cleaned = 0.000911831 Jy
! Component: 200  -  total flux cleaned = 0.000912679 Jy
! Total flux subtracted in 200 components = 0.000912679 Jy
! Clean residual min=-0.001032 max=0.000903 Jy/beam
! Clean residual mean=0.000003 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.0973645 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.19287e-05 Jy
! Component: 100  -  total flux cleaned = -4.21082e-05 Jy
! Component: 150  -  total flux cleaned = -6.16235e-05 Jy
! Component: 200  -  total flux cleaned = -4.47763e-05 Jy
! Total flux subtracted in 200 components = -4.47763e-05 Jy
! Clean residual min=-0.001002 max=0.000878 Jy/beam
! Clean residual mean=0.000003 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.0973197 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 101 components and 0.0973197 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.82 mas, bmaj=10.69 mas, bpa=-19.9 degrees
! Estimated noise=0.821138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000130888 Jy
! Component: 100  -  total flux cleaned = -5.74015e-05 Jy
! Component: 150  -  total flux cleaned = 5.45976e-05 Jy
! Component: 200  -  total flux cleaned = 7.57696e-05 Jy
! Total flux subtracted in 200 components = 7.57696e-05 Jy
! Clean residual min=-0.000988 max=0.000934 Jy/beam
! Clean residual mean=0.000002 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.0973954 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 125 components and 0.0973954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058148Jy  sigma=0.455293
! Fit after  self-cal, rms=0.058146Jy  sigma=0.455264
wmodel J2155+1914_S_map.mod
! Writing 125 model components to file: J2155+1914_S_map.mod
wobs   J2155+1914_S_uvs.fits
! Writing UV FITS file: J2155+1914_S_uvs.fits
wwins  J2155+1914_S_map.win
! wwins: Wrote 4 windows to J2155+1914_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000128101 Jy
! Component: 100  -  total flux cleaned = -0.000144375 Jy
! Component: 150  -  total flux cleaned = -8.33993e-05 Jy
! Component: 200  -  total flux cleaned = 1.96576e-05 Jy
! Component: 250  -  total flux cleaned = 0.000119542 Jy
! Component: 300  -  total flux cleaned = 0.000216431 Jy
! Component: 350  -  total flux cleaned = 0.000202872 Jy
! Component: 400  -  total flux cleaned = 0.000216406 Jy
! Component: 450  -  total flux cleaned = 0.000229531 Jy
! Component: 500  -  total flux cleaned = 0.000254969 Jy
! Component: 550  -  total flux cleaned = 0.000254636 Jy
! Component: 600  -  total flux cleaned = 0.000169093 Jy
! Component: 650  -  total flux cleaned = 0.00015737 Jy
! Component: 700  -  total flux cleaned = 0.000110476 Jy
! Component: 750  -  total flux cleaned = 0.000110379 Jy
! Component: 800  -  total flux cleaned = 4.18991e-05 Jy
! Component: 850  -  total flux cleaned = 1.94768e-05 Jy
! Component: 900  -  total flux cleaned = -1.35869e-05 Jy
! Component: 950  -  total flux cleaned = -3.52576e-05 Jy
! Component: 1000  -  total flux cleaned = -6.7541e-05 Jy
! Component: 1050  -  total flux cleaned = -6.75563e-05 Jy
! Component: 1100  -  total flux cleaned = -8.88807e-05 Jy
! Component: 1150  -  total flux cleaned = -0.000162103 Jy
! Component: 1200  -  total flux cleaned = -0.000172322 Jy
! Component: 1250  -  total flux cleaned = -0.000223499 Jy
! Component: 1300  -  total flux cleaned = -0.000233463 Jy
! Component: 1350  -  total flux cleaned = -0.000263415 Jy
! Component: 1400  -  total flux cleaned = -0.00028322 Jy
! Component: 1450  -  total flux cleaned = -0.000342429 Jy
! Component: 1500  -  total flux cleaned = -0.000332613 Jy
! Component: 1550  -  total flux cleaned = -0.00037133 Jy
! Component: 1600  -  total flux cleaned = -0.000409604 Jy
! Component: 1650  -  total flux cleaned = -0.000390649 Jy
! Component: 1700  -  total flux cleaned = -0.000428271 Jy
! Component: 1750  -  total flux cleaned = -0.000456091 Jy
! Component: 1800  -  total flux cleaned = -0.000474345 Jy
! Component: 1850  -  total flux cleaned = -0.000465231 Jy
! Component: 1900  -  total flux cleaned = -0.000474368 Jy
! Component: 1950  -  total flux cleaned = -0.00051916 Jy
! Component: 2000  -  total flux cleaned = -0.00054584 Jy
! Component: 2050  -  total flux cleaned = -0.000563461 Jy
! Component: 2100  -  total flux cleaned = -0.000607156 Jy
! Component: 2150  -  total flux cleaned = -0.000659146 Jy
! Component: 2200  -  total flux cleaned = -0.000676263 Jy
! Component: 2250  -  total flux cleaned = -0.000676246 Jy
! Component: 2300  -  total flux cleaned = -0.000718551 Jy
! Component: 2350  -  total flux cleaned = -0.000785853 Jy
! Component: 2400  -  total flux cleaned = -0.000802464 Jy
! Component: 2450  -  total flux cleaned = -0.000835484 Jy
! Component: 2500  -  total flux cleaned = -0.000884718 Jy
! Component: 2550  -  total flux cleaned = -0.000909083 Jy
! Component: 2600  -  total flux cleaned = -0.000925297 Jy
! Component: 2650  -  total flux cleaned = -0.000965402 Jy
! Component: 2700  -  total flux cleaned = -0.000981336 Jy
! Component: 2750  -  total flux cleaned = -0.00101298 Jy
! Component: 2800  -  total flux cleaned = -0.00102875 Jy
! Component: 2850  -  total flux cleaned = -0.00107551 Jy
! Component: 2900  -  total flux cleaned = -0.00106775 Jy
! Component: 2950  -  total flux cleaned = -0.00113695 Jy
! Component: 3000  -  total flux cleaned = -0.00112927 Jy
! Component: 3050  -  total flux cleaned = -0.00117482 Jy
! Component: 3100  -  total flux cleaned = -0.00118979 Jy
! Component: 3150  -  total flux cleaned = -0.00121975 Jy
! Component: 3200  -  total flux cleaned = -0.00121981 Jy
! Component: 3250  -  total flux cleaned = -0.00124203 Jy
! Component: 3300  -  total flux cleaned = -0.00128605 Jy
! Component: 3350  -  total flux cleaned = -0.00129325 Jy
! Component: 3400  -  total flux cleaned = -0.00129324 Jy
! Component: 3450  -  total flux cleaned = -0.00131485 Jy
! Component: 3500  -  total flux cleaned = -0.00135068 Jy
! Component: 3550  -  total flux cleaned = -0.0013293 Jy
! Component: 3600  -  total flux cleaned = -0.0013858 Jy
! Component: 3650  -  total flux cleaned = -0.00136463 Jy
! Component: 3700  -  total flux cleaned = -0.00135062 Jy
! Component: 3750  -  total flux cleaned = -0.00139228 Jy
! Component: 3800  -  total flux cleaned = -0.00135778 Jy
! Component: 3850  -  total flux cleaned = -0.00136462 Jy
! Component: 3900  -  total flux cleaned = -0.0013987 Jy
! Component: 3950  -  total flux cleaned = -0.00138503 Jy
! Component: 4000  -  total flux cleaned = -0.00136476 Jy
! Component: 4050  -  total flux cleaned = -0.00136477 Jy
! Total flux subtracted in 4096 components = -0.00137812 Jy
! Clean residual min=-0.000471 max=0.000373 Jy/beam
! Clean residual mean=0.000000 rms=0.000129 Jy/beam
! Combined flux in latest and established models = 0.0960173 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 411 components and 0.0960173 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2155+1914_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.82 x 10.69 at -19.9 degrees (North through East)
! Clean map  min=-0.00096347  max=0.090752 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2155+1914_S_map.fits
wmodel /image_prod/ug002_uva//J2155+1914_S_map.mod
! Writing 411 model components to file: /image_prod/ug002_uva//J2155+1914_S_map.mod
wobs   /image_prod/ug002_uva//J2155+1914_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2155+1914_S_uvs.fits
wwins  /image_prod/ug002_uva//J2155+1914_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J2155+1914_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0907524 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000127556 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.421662 0.421662 0.843325 1.68665 3.3733 6.7466 13.4932 26.9864 53.9728
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.09 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  711.469 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2155+1914_S_dfm.log closed on Thu Mar  5 05:24:35 2020