! Started logfile: /image_prod/ug002_uva//J2148+6107_X_dfm.log on Thu Mar 5 05:23:31 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2148+6107_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2148+6107_X_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.962963 visibilities/baseline/integration-bin. ! Found source: J2148+6107 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 24960 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2148+6107_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.044153Jy sigma=8.987393 ! Fit after self-cal, rms=0.804504Jy sigma=7.021444 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.726 mas, bmaj=0.93 mas, bpa=-9.95 degrees ! Estimated noise=0.976103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113803 Jy ! Component: 100 - total flux cleaned = 0.17007 Jy ! Total flux subtracted in 100 components = 0.17007 Jy ! Clean residual min=-0.014544 max=0.055059 Jy/beam ! Clean residual mean=0.000082 rms=0.004111 Jy/beam ! Combined flux in latest and established models = 0.17007 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.17007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.205058Jy sigma=1.611722 ! Fit after self-cal, rms=0.204909Jy sigma=1.610158 ! Inverting map ! Added new window around map position (-3, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0531797 Jy ! Component: 100 - total flux cleaned = 0.0903412 Jy ! Total flux subtracted in 100 components = 0.0903412 Jy ! Clean residual min=-0.010771 max=0.027294 Jy/beam ! Clean residual mean=0.000071 rms=0.003077 Jy/beam ! Combined flux in latest and established models = 0.260412 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 35 components and 0.260412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167609Jy sigma=1.306239 ! Fit after self-cal, rms=0.166720Jy sigma=1.297281 ! Inverting map ! Added new window around map position (-1.2, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339705 Jy ! Component: 100 - total flux cleaned = 0.0615035 Jy ! Total flux subtracted in 100 components = 0.0615035 Jy ! Clean residual min=-0.009103 max=0.022420 Jy/beam ! Clean residual mean=0.000062 rms=0.002497 Jy/beam ! Combined flux in latest and established models = 0.321915 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 51 components and 0.321915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.142567Jy sigma=1.100600 ! Fit after self-cal, rms=0.142326Jy sigma=1.097963 ! Inverting map ! Added new window around map position (-1, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259771 Jy ! Component: 100 - total flux cleaned = 0.0470002 Jy ! Total flux subtracted in 100 components = 0.0470002 Jy ! Clean residual min=-0.007723 max=0.016727 Jy/beam ! Clean residual mean=0.000055 rms=0.002104 Jy/beam ! Combined flux in latest and established models = 0.368915 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 64 components and 0.368915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125290Jy sigma=0.962148 ! Fit after self-cal, rms=0.125107Jy sigma=0.959927 ! Inverting map ! Added new window around map position (0.8, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195148 Jy ! Component: 100 - total flux cleaned = 0.0362235 Jy ! Total flux subtracted in 100 components = 0.0362235 Jy ! Clean residual min=-0.007284 max=0.012436 Jy/beam ! Clean residual mean=0.000050 rms=0.001856 Jy/beam ! Combined flux in latest and established models = 0.405139 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 88 components and 0.405139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113378Jy sigma=0.869206 ! Fit after self-cal, rms=0.113328Jy sigma=0.868710 ! Inverting map ! Added new window around map position (-4.6, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157785 Jy ! Component: 100 - total flux cleaned = 0.0296133 Jy ! Total flux subtracted in 100 components = 0.0296133 Jy ! Clean residual min=-0.006598 max=0.011472 Jy/beam ! Clean residual mean=0.000046 rms=0.001670 Jy/beam ! Combined flux in latest and established models = 0.434752 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 100 components and 0.434752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104797Jy sigma=0.804473 ! Fit after self-cal, rms=0.104751Jy sigma=0.804025 ! Inverting map ! Added new window around map position (-3.2, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135327 Jy ! Component: 100 - total flux cleaned = 0.0255322 Jy ! Total flux subtracted in 100 components = 0.0255322 Jy ! Clean residual min=-0.006066 max=0.009419 Jy/beam ! Clean residual mean=0.000042 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 0.460284 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 113 components and 0.460284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097710Jy sigma=0.751760 ! Fit after self-cal, rms=0.097700Jy sigma=0.751282 ! Inverting map ! Added new window around map position (-4.8, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117106 Jy ! Component: 100 - total flux cleaned = 0.02227 Jy ! Total flux subtracted in 100 components = 0.02227 Jy ! Clean residual min=-0.005849 max=0.008581 Jy/beam ! Clean residual mean=0.000039 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.482554 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 128 components and 0.482554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091930Jy sigma=0.708776 ! Fit after self-cal, rms=0.091937Jy sigma=0.708266 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9427 mas, bmaj=1.172 mas, bpa=-9.319 degrees ! Estimated noise=0.525781 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288418 Jy ! Component: 100 - total flux cleaned = 0.0523515 Jy ! Component: 150 - total flux cleaned = 0.072162 Jy ! Component: 200 - total flux cleaned = 0.0890456 Jy ! Total flux subtracted in 200 components = 0.0890456 Jy ! Clean residual min=-0.008521 max=0.013573 Jy/beam ! Clean residual mean=0.000020 rms=0.002345 Jy/beam ! Combined flux in latest and established models = 0.5716 Jy ! Performing phase self-cal ! Adding 97 model components to the UV plane model. ! The established model now contains 192 components and 0.5716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072435Jy sigma=0.571711 ! Fit after self-cal, rms=0.072043Jy sigma=0.566008 ! Inverting map ! Added new window around map position (-6, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169132 Jy ! Component: 100 - total flux cleaned = 0.0305968 Jy ! Component: 150 - total flux cleaned = 0.0424058 Jy ! Component: 200 - total flux cleaned = 0.0527277 Jy ! Total flux subtracted in 200 components = 0.0527277 Jy ! Clean residual min=-0.006534 max=0.009458 Jy/beam ! Clean residual mean=0.000016 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.624328 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 237 components and 0.624328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063661Jy sigma=0.510099 ! Fit after self-cal, rms=0.063458Jy sigma=0.506988 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9427 x 1.172 at -9.319 degrees (North through East) ! Clean map min=-0.0060038 max=0.16973 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 1.06 KP 1.02 ! LA 0.97 MK 0.99 OV 0.97 PT 0.87 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 1.09 KP 1.01 ! LA 0.97 MK 0.99 OV 0.97 PT 0.87 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.06 KP 1.01 ! LA 0.98 MK 0.99 OV 0.97 PT 0.87 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.04 KP 1.02 ! LA 0.98 MK 1.01 OV 0.97 PT 0.87 ! SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 1.04 KP 1.02 ! LA 0.97 MK 1.05 OV 0.99 PT 0.87 ! SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.07 KP 1.01 ! LA 0.96 MK 0.99 OV 0.97 PT 0.87 ! SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.04 KP 1.01 ! LA 0.98 MK 1.04 OV 0.97 PT 0.87 ! SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.02 KP 1.04 ! LA 0.98 MK 1.07 OV 0.97 PT 0.86 ! SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.04 KP 1.00 ! LA 0.97 MK 1.05 OV 0.98 PT 0.87 ! SC 0.95 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 1.06 KP 1.02 ! LA 0.97 MK 1.05 OV 0.97 PT 0.87 ! SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.00 KP 1.02 ! LA 0.96 MK 1.08 OV 0.99 PT 0.87 ! SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 1.08 KP 1.02 ! LA 0.96 MK 1.09 OV 0.98 PT 0.85 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.063458Jy sigma=0.506988 ! Fit after self-cal, rms=0.055623Jy sigma=0.462043 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9533 mas, bmaj=1.186 mas, bpa=-8.717 degrees ! Estimated noise=0.522681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0064032 Jy ! Component: 100 - total flux cleaned = 0.011144 Jy ! Component: 150 - total flux cleaned = 0.0138613 Jy ! Component: 200 - total flux cleaned = 0.0160994 Jy ! Total flux subtracted in 200 components = 0.0160994 Jy ! Clean residual min=-0.004171 max=0.004298 Jy/beam ! Clean residual mean=-0.000009 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.640427 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 274 components and 0.640427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054540Jy sigma=0.452683 ! Fit after self-cal, rms=0.054484Jy sigma=0.451840 ! Inverting map ! Added new window around map position (-51, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447441 Jy ! Component: 100 - total flux cleaned = 0.00695452 Jy ! Component: 150 - total flux cleaned = 0.00889113 Jy ! Component: 200 - total flux cleaned = 0.0102962 Jy ! Total flux subtracted in 200 components = 0.0102962 Jy ! Clean residual min=-0.003895 max=0.003270 Jy/beam ! Clean residual mean=-0.000009 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.650723 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 296 components and 0.650723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053970Jy sigma=0.447275 ! Fit after self-cal, rms=0.053949Jy sigma=0.446976 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053949Jy sigma=0.446976 ! Fit after self-cal, rms=0.053542Jy sigma=0.442065 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9531 mas, bmaj=1.188 mas, bpa=-6.835 degrees ! Estimated noise=0.522179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271933 Jy ! Component: 100 - total flux cleaned = 0.00418891 Jy ! Component: 150 - total flux cleaned = 0.00537311 Jy ! Component: 200 - total flux cleaned = 0.00647861 Jy ! Total flux subtracted in 200 components = 0.00647861 Jy ! Clean residual min=-0.002732 max=0.002693 Jy/beam ! Clean residual mean=-0.000002 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.657202 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 309 components and 0.657202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053274Jy sigma=0.439768 ! Fit after self-cal, rms=0.053268Jy sigma=0.439574 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120101 Jy ! Component: 100 - total flux cleaned = 0.00208351 Jy ! Component: 150 - total flux cleaned = 0.0027636 Jy ! Component: 200 - total flux cleaned = 0.00323585 Jy ! Total flux subtracted in 200 components = 0.00323585 Jy ! Clean residual min=-0.002582 max=0.002607 Jy/beam ! Clean residual mean=-0.000002 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.660438 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 315 components and 0.660438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053141Jy sigma=0.438524 ! Fit after self-cal, rms=0.053138Jy sigma=0.438463 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053138Jy sigma=0.438463 ! Fit after self-cal, rms=0.053198Jy sigma=0.438069 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9551 mas, bmaj=1.189 mas, bpa=-6.749 degrees ! Estimated noise=0.522561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186373 Jy ! Component: 100 - total flux cleaned = 0.0027904 Jy ! Component: 150 - total flux cleaned = 0.00348332 Jy ! Component: 200 - total flux cleaned = 0.00396895 Jy ! Total flux subtracted in 200 components = 0.00396895 Jy ! Clean residual min=-0.002344 max=0.002580 Jy/beam ! Clean residual mean=-0.000003 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.664407 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 321 components and 0.664407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053072Jy sigma=0.437063 ! Fit after self-cal, rms=0.053071Jy sigma=0.436986 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.4, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028049 Jy ! Component: 100 - total flux cleaned = 0.00426654 Jy ! Component: 150 - total flux cleaned = 0.00526771 Jy ! Component: 200 - total flux cleaned = 0.0059096 Jy ! Total flux subtracted in 200 components = 0.0059096 Jy ! Clean residual min=-0.002171 max=0.002067 Jy/beam ! Clean residual mean=-0.000002 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.670317 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 336 components and 0.670317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052877Jy sigma=0.435439 ! Fit after self-cal, rms=0.052864Jy sigma=0.435317 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052864Jy sigma=0.435317 ! Fit after self-cal, rms=0.052843Jy sigma=0.435105 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.373 mas, bmaj=2.603 mas, bpa=49.52 degrees ! Estimated noise=0.722395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329752 Jy ! Component: 100 - total flux cleaned = 0.00479019 Jy ! Component: 150 - total flux cleaned = 0.00598332 Jy ! Component: 200 - total flux cleaned = 0.0069187 Jy ! Total flux subtracted in 200 components = 0.0069187 Jy ! Clean residual min=-0.002482 max=0.002726 Jy/beam ! Clean residual mean=-0.000006 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.677235 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 364 components and 0.677236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052761Jy sigma=0.434421 ! Fit after self-cal, rms=0.052747Jy sigma=0.434280 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000882545 Jy ! Component: 100 - total flux cleaned = 0.00163176 Jy ! Component: 150 - total flux cleaned = 0.00218561 Jy ! Component: 200 - total flux cleaned = 0.00250874 Jy ! Total flux subtracted in 200 components = 0.00250874 Jy ! Clean residual min=-0.002498 max=0.002674 Jy/beam ! Clean residual mean=-0.000006 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.679744 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 374 components and 0.679744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052730Jy sigma=0.434103 ! Fit after self-cal, rms=0.052725Jy sigma=0.434058 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.956 mas, bmaj=1.189 mas, bpa=-6.745 degrees ! Estimated noise=0.5226 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.956 x 1.189 at -6.745 degrees (North through East) ! Clean map min=-0.0019992 max=0.16603 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7327 mas, bmaj=0.9395 mas, bpa=-7.453 degrees ! Estimated noise=0.990715 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115978 Jy ! Component: 100 - total flux cleaned = 0.180472 Jy ! Component: 150 - total flux cleaned = 0.228023 Jy ! Component: 200 - total flux cleaned = 0.266148 Jy ! Total flux subtracted in 200 components = 0.266148 Jy ! Clean residual min=-0.010413 max=0.023227 Jy/beam ! Clean residual mean=0.000061 rms=0.002914 Jy/beam ! Combined flux in latest and established models = 0.266148 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.266148 Jy ! Inverting map and beam ! Estimated beam: bmin=0.956 mas, bmaj=1.189 mas, bpa=-6.745 degrees ! Estimated noise=0.5226 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0761808 Jy ! Component: 100 - total flux cleaned = 0.129424 Jy ! Component: 150 - total flux cleaned = 0.170577 Jy ! Component: 200 - total flux cleaned = 0.203561 Jy ! Total flux subtracted in 200 components = 0.203561 Jy ! Clean residual min=-0.009593 max=0.020175 Jy/beam ! Clean residual mean=0.000014 rms=0.003270 Jy/beam ! Combined flux in latest and established models = 0.469709 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 130 components and 0.469709 Jy ! Inverting map ! Added new window around map position (0.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.02721 Jy ! Component: 100 - total flux cleaned = 0.0499023 Jy ! Component: 150 - total flux cleaned = 0.0691074 Jy ! Component: 200 - total flux cleaned = 0.0855066 Jy ! Total flux subtracted in 200 components = 0.0855066 Jy ! Clean residual min=-0.005482 max=0.010929 Jy/beam ! Clean residual mean=0.000006 rms=0.001845 Jy/beam ! Combined flux in latest and established models = 0.555216 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 212 components and 0.555216 Jy ! Inverting map ! Added new window around map position (-4.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141834 Jy ! Component: 100 - total flux cleaned = 0.0263501 Jy ! Component: 150 - total flux cleaned = 0.0368632 Jy ! Component: 200 - total flux cleaned = 0.045995 Jy ! Total flux subtracted in 200 components = 0.045995 Jy ! Clean residual min=-0.003574 max=0.005889 Jy/beam ! Clean residual mean=0.000002 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.601211 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 268 components and 0.601211 Jy ! Inverting map ! Added new window around map position (-0.2, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00801133 Jy ! Component: 100 - total flux cleaned = 0.0150397 Jy ! Component: 150 - total flux cleaned = 0.0212652 Jy ! Component: 200 - total flux cleaned = 0.0268215 Jy ! Total flux subtracted in 200 components = 0.0268215 Jy ! Clean residual min=-0.002851 max=0.003847 Jy/beam ! Clean residual mean=0.000000 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.628032 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 299 components and 0.628032 Jy ! Inverting map ! Added new window around map position (-3.8, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504022 Jy ! Component: 100 - total flux cleaned = 0.00955458 Jy ! Component: 150 - total flux cleaned = 0.0136345 Jy ! Component: 200 - total flux cleaned = 0.0173279 Jy ! Total flux subtracted in 200 components = 0.0173279 Jy ! Clean residual min=-0.002365 max=0.002773 Jy/beam ! Clean residual mean=-0.000001 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.64536 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 336 components and 0.64536 Jy ! Inverting map ! Added new window around map position (-7.6, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346688 Jy ! Component: 100 - total flux cleaned = 0.00652873 Jy ! Component: 150 - total flux cleaned = 0.00930798 Jy ! Component: 200 - total flux cleaned = 0.0118406 Jy ! Total flux subtracted in 200 components = 0.0118406 Jy ! Clean residual min=-0.002032 max=0.002021 Jy/beam ! Clean residual mean=-0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.657201 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 363 components and 0.657201 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.373 mas, bmaj=2.603 mas, bpa=49.52 degrees ! Estimated noise=0.722395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482345 Jy ! Component: 100 - total flux cleaned = 0.00860157 Jy ! Component: 150 - total flux cleaned = 0.0116934 Jy ! Component: 200 - total flux cleaned = 0.0142527 Jy ! Total flux subtracted in 200 components = 0.0142527 Jy ! Clean residual min=-0.002608 max=0.002879 Jy/beam ! Clean residual mean=-0.000005 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.671454 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213266 Jy ! Component: 100 - total flux cleaned = 0.00391596 Jy ! Component: 150 - total flux cleaned = 0.00541235 Jy ! Component: 200 - total flux cleaned = 0.00667036 Jy ! Total flux subtracted in 200 components = 0.00667036 Jy ! Clean residual min=-0.002539 max=0.002721 Jy/beam ! Clean residual mean=-0.000005 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.678124 Jy ! Adding 122 model components to the UV plane model. ! The established model now contains 452 components and 0.678125 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.956 mas, bmaj=1.189 mas, bpa=-6.745 degrees ! Estimated noise=0.5226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194339 Jy ! Component: 100 - total flux cleaned = 0.000203768 Jy ! Component: 150 - total flux cleaned = 0.000613533 Jy ! Component: 200 - total flux cleaned = 0.00107111 Jy ! Total flux subtracted in 200 components = 0.00107111 Jy ! Clean residual min=-0.001855 max=0.001778 Jy/beam ! Clean residual mean=-0.000002 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.679196 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 474 components and 0.679196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052630Jy sigma=0.433188 ! Fit after self-cal, rms=0.052585Jy sigma=0.432816 wmodel J2148+6107_X_map.mod ! Writing 474 model components to file: J2148+6107_X_map.mod wobs J2148+6107_X_uvs.fits ! Writing UV FITS file: J2148+6107_X_uvs.fits wwins J2148+6107_X_map.win ! wwins: Wrote 17 windows to J2148+6107_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235494 Jy ! Component: 100 - total flux cleaned = -0.000173577 Jy ! Component: 150 - total flux cleaned = 3.04647e-06 Jy ! Component: 200 - total flux cleaned = -2.4662e-05 Jy ! Component: 250 - total flux cleaned = -7.92989e-05 Jy ! Component: 300 - total flux cleaned = -0.000160324 Jy ! Component: 350 - total flux cleaned = -0.000239353 Jy ! Component: 400 - total flux cleaned = -0.000265245 Jy ! Component: 450 - total flux cleaned = -0.000290814 Jy ! Component: 500 - total flux cleaned = -0.000315367 Jy ! Component: 550 - total flux cleaned = -0.000339589 Jy ! Component: 600 - total flux cleaned = -0.000387462 Jy ! Component: 650 - total flux cleaned = -0.000458141 Jy ! Component: 700 - total flux cleaned = -0.000504456 Jy ! Component: 750 - total flux cleaned = -0.000572528 Jy ! Component: 800 - total flux cleaned = -0.00057272 Jy ! Component: 850 - total flux cleaned = -0.000638793 Jy ! Component: 900 - total flux cleaned = -0.000616917 Jy ! Component: 950 - total flux cleaned = -0.000660103 Jy ! Component: 1000 - total flux cleaned = -0.00072385 Jy ! Component: 1050 - total flux cleaned = -0.000723833 Jy ! Component: 1100 - total flux cleaned = -0.00086835 Jy ! Component: 1150 - total flux cleaned = -0.000786574 Jy ! Component: 1200 - total flux cleaned = -0.000827355 Jy ! Component: 1250 - total flux cleaned = -0.000907323 Jy ! Component: 1300 - total flux cleaned = -0.000927163 Jy ! Component: 1350 - total flux cleaned = -0.000946916 Jy ! Component: 1400 - total flux cleaned = -0.000985548 Jy ! Component: 1450 - total flux cleaned = -0.0010425 Jy ! Component: 1500 - total flux cleaned = -0.00109894 Jy ! Component: 1550 - total flux cleaned = -0.00111788 Jy ! Component: 1600 - total flux cleaned = -0.0011179 Jy ! Component: 1650 - total flux cleaned = -0.001118 Jy ! Component: 1700 - total flux cleaned = -0.00120868 Jy ! Component: 1750 - total flux cleaned = -0.00126265 Jy ! Component: 1800 - total flux cleaned = -0.00129791 Jy ! Component: 1850 - total flux cleaned = -0.00136776 Jy ! Component: 1900 - total flux cleaned = -0.00135035 Jy ! Component: 1950 - total flux cleaned = -0.00140199 Jy ! Component: 2000 - total flux cleaned = -0.0014697 Jy ! Component: 2050 - total flux cleaned = -0.00150339 Jy ! Component: 2100 - total flux cleaned = -0.00155367 Jy ! Component: 2150 - total flux cleaned = -0.00161986 Jy ! Component: 2200 - total flux cleaned = -0.00171825 Jy ! Component: 2250 - total flux cleaned = -0.00176705 Jy ! Component: 2300 - total flux cleaned = -0.00189607 Jy ! Component: 2350 - total flux cleaned = -0.00192799 Jy ! Component: 2400 - total flux cleaned = -0.00200718 Jy ! Component: 2450 - total flux cleaned = -0.00203867 Jy ! Component: 2500 - total flux cleaned = -0.00208525 Jy ! Component: 2550 - total flux cleaned = -0.00211614 Jy ! Component: 2600 - total flux cleaned = -0.00214679 Jy ! Component: 2650 - total flux cleaned = -0.0021926 Jy ! Component: 2700 - total flux cleaned = -0.00223785 Jy ! Component: 2750 - total flux cleaned = -0.00229769 Jy ! Component: 2800 - total flux cleaned = -0.0022977 Jy ! Component: 2850 - total flux cleaned = -0.00235683 Jy ! Component: 2900 - total flux cleaned = -0.00240081 Jy ! Component: 2950 - total flux cleaned = -0.00241538 Jy ! Component: 3000 - total flux cleaned = -0.00247305 Jy ! Component: 3050 - total flux cleaned = -0.00250173 Jy ! Component: 3100 - total flux cleaned = -0.00253015 Jy ! Component: 3150 - total flux cleaned = -0.00255831 Jy ! Component: 3200 - total flux cleaned = -0.00262854 Jy ! Component: 3250 - total flux cleaned = -0.00262846 Jy ! Component: 3300 - total flux cleaned = -0.00267023 Jy ! Component: 3350 - total flux cleaned = -0.0027801 Jy ! Component: 3400 - total flux cleaned = -0.00278002 Jy ! Component: 3450 - total flux cleaned = -0.0028342 Jy ! Component: 3500 - total flux cleaned = -0.00279389 Jy ! Component: 3550 - total flux cleaned = -0.00282083 Jy ! Component: 3600 - total flux cleaned = -0.00290063 Jy ! Component: 3650 - total flux cleaned = -0.00294039 Jy ! Component: 3700 - total flux cleaned = -0.00301897 Jy ! Component: 3750 - total flux cleaned = -0.00303196 Jy ! Component: 3800 - total flux cleaned = -0.00304487 Jy ! Component: 3850 - total flux cleaned = -0.00309635 Jy ! Component: 3900 - total flux cleaned = -0.00308362 Jy ! Component: 3950 - total flux cleaned = -0.00314722 Jy ! Component: 4000 - total flux cleaned = -0.0031852 Jy ! Component: 4050 - total flux cleaned = -0.00321018 Jy ! Total flux subtracted in 4096 components = -0.00321015 Jy ! Clean residual min=-0.000754 max=0.000769 Jy/beam ! Clean residual mean=-0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.675986 Jy keep ! Adding 357 model components to the UV plane model. ! The established model now contains 831 components and 0.675985 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2148+6107_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.956 x 1.189 at -6.745 degrees (North through East) ! Clean map min=-0.0012261 max=0.1686 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2148+6107_X_map.fits wmodel /image_prod/ug002_uva//J2148+6107_X_map.mod ! Writing 831 model components to file: /image_prod/ug002_uva//J2148+6107_X_map.mod wobs /image_prod/ug002_uva//J2148+6107_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2148+6107_X_uvs.fits wwins /image_prod/ug002_uva//J2148+6107_X_map.win ! wwins: Wrote 18 windows to /image_prod/ug002_uva//J2148+6107_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.168604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218188 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.388224 0.388224 0.776449 1.5529 3.1058 6.21159 12.4232 24.8464 49.6927 99.3855 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.168 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 772.748 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2148+6107_X_dfm.log closed on Thu Mar 5 05:23:38 2020