! Started logfile: /image_prod/ug002_uva//J2141-3729_S_dfm.log on Thu Mar  5 05:20:41 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2141-3729_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2141-3729_S_uva.fits
! AN table 1: 30 integrations on 28 of 28 possible baselines.
! AN table 2: 30 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.954167 visibilities/baseline/integration-bin.
! Found source: J2141-3729
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4809 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2141-3729_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.022967Jy  sigma=5.572583
! Fit after  self-cal, rms=0.779334Jy  sigma=4.058493
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.775 mas, bmaj=15.22 mas, bpa=-17.14 degrees
! Estimated noise=2.9119 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.168564 Jy
! Component: 100  -  total flux cleaned = 0.230892 Jy
! Total flux subtracted in 100 components = 0.230892 Jy
! Clean residual min=-0.014234 max=0.030327 Jy/beam
! Clean residual mean=0.000090 rms=0.005894 Jy/beam
! Combined flux in latest and established models = 0.230892 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.230892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.125828Jy  sigma=0.642408
! Fit after  self-cal, rms=0.125720Jy  sigma=0.641626
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.626 mas, bmaj=17.42 mas, bpa=-15.93 degrees
! Estimated noise=1.96144 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0496396 Jy
! Component: 100  -  total flux cleaned = 0.0753728 Jy
! Component: 150  -  total flux cleaned = 0.0898108 Jy
! Component: 200  -  total flux cleaned = 0.0982766 Jy
! Total flux subtracted in 200 components = 0.0982766 Jy
! Clean residual min=-0.009173 max=0.011242 Jy/beam
! Clean residual mean=0.000026 rms=0.002955 Jy/beam
! Combined flux in latest and established models = 0.329169 Jy
! Performing phase self-cal
! Adding 108 model components to the UV plane model.
! The established model now contains 125 components and 0.329169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111624Jy  sigma=0.489645
! Fit after  self-cal, rms=0.111628Jy  sigma=0.489296
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.626 x 17.42 at -15.93 degrees (North through East)
! Clean map  min=-0.009038  max=0.22124 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.22     KP        0.97     LA        0.95     
!   MK        1.00     NL        1.06     OV        0.93     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.15     FD        0.95     KP        0.97     LA        0.96     
!   MK        1.05     NL        1.21     OV        0.88     PT        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     HN        1.14     KP        1.00     LA        0.96     
!   MK        1.01     NL        1.21     OV        0.98     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.64     FD        0.98     KP        0.99     LA        0.98     
!   MK        1.02     NL        1.38     OV        0.90     PT        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.31     KP        0.96     LA        0.99     
!   MK        1.04     NL        1.10     OV        0.93     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.38     FD        0.95     KP        1.00     LA        0.99     
!   MK        0.97     NL        1.29     OV        0.90     PT        0.95     
! 
! 
! Fit before self-cal, rms=0.111628Jy  sigma=0.489296
! Fit after  self-cal, rms=0.133142Jy  sigma=0.459400
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.688 mas, bmaj=17.9 mas, bpa=-16.34 degrees
! Estimated noise=1.97835 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00371075 Jy
! Component: 100  -  total flux cleaned = -0.00412509 Jy
! Component: 150  -  total flux cleaned = -0.00447384 Jy
! Component: 200  -  total flux cleaned = -0.0047727 Jy
! Total flux subtracted in 200 components = -0.0047727 Jy
! Clean residual min=-0.005437 max=0.008292 Jy/beam
! Clean residual mean=0.000020 rms=0.001569 Jy/beam
! Combined flux in latest and established models = 0.324396 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 141 components and 0.324396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132917Jy  sigma=0.458576
! Fit after  self-cal, rms=0.133302Jy  sigma=0.458409
! Inverting map 
! Added new window around map position (-14.5, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00707089 Jy
! Component: 100  -  total flux cleaned = 0.00950645 Jy
! Component: 150  -  total flux cleaned = 0.0105367 Jy
! Component: 200  -  total flux cleaned = 0.0114039 Jy
! Total flux subtracted in 200 components = 0.0114039 Jy
! Clean residual min=-0.004736 max=0.004605 Jy/beam
! Clean residual mean=0.000057 rms=0.001233 Jy/beam
! Combined flux in latest and established models = 0.3358 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 171 components and 0.3358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132882Jy  sigma=0.455119
! Fit after  self-cal, rms=0.132814Jy  sigma=0.454838
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132814Jy  sigma=0.454838
! Fit after  self-cal, rms=0.135038Jy  sigma=0.454417
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.703 mas, bmaj=17.97 mas, bpa=-16.45 degrees
! Estimated noise=1.9757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000526937 Jy
! Component: 100  -  total flux cleaned = 7.49687e-05 Jy
! Component: 150  -  total flux cleaned = 0.000577386 Jy
! Component: 200  -  total flux cleaned = 0.00100815 Jy
! Total flux subtracted in 200 components = 0.00100815 Jy
! Clean residual min=-0.004128 max=0.003984 Jy/beam
! Clean residual mean=0.000047 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 0.336808 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 206 components and 0.336808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134875Jy  sigma=0.453640
! Fit after  self-cal, rms=0.134874Jy  sigma=0.453582
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000794053 Jy
! Component: 100  -  total flux cleaned = 0.000993779 Jy
! Component: 150  -  total flux cleaned = 0.00117879 Jy
! Component: 200  -  total flux cleaned = 0.00134933 Jy
! Total flux subtracted in 200 components = 0.00134933 Jy
! Clean residual min=-0.003965 max=0.003954 Jy/beam
! Clean residual mean=0.000050 rms=0.001045 Jy/beam
! Combined flux in latest and established models = 0.338158 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 232 components and 0.338158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134795Jy  sigma=0.453282
! Fit after  self-cal, rms=0.134789Jy  sigma=0.453263
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134789Jy  sigma=0.453263
! Fit after  self-cal, rms=0.136335Jy  sigma=0.453073
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.716 mas, bmaj=18.02 mas, bpa=-16.53 degrees
! Estimated noise=1.97445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00155276 Jy
! Component: 100  -  total flux cleaned = -0.00149378 Jy
! Component: 150  -  total flux cleaned = -0.00137633 Jy
! Component: 200  -  total flux cleaned = -0.00126742 Jy
! Total flux subtracted in 200 components = -0.00126742 Jy
! Clean residual min=-0.003718 max=0.003622 Jy/beam
! Clean residual mean=0.000044 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.33689 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 247 components and 0.33689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136241Jy  sigma=0.452756
! Fit after  self-cal, rms=0.136249Jy  sigma=0.452739
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228909 Jy
! Component: 100  -  total flux cleaned = 0.000377308 Jy
! Component: 150  -  total flux cleaned = 0.000424668 Jy
! Component: 200  -  total flux cleaned = 0.000467955 Jy
! Total flux subtracted in 200 components = 0.000467955 Jy
! Clean residual min=-0.003632 max=0.003626 Jy/beam
! Clean residual mean=0.000045 rms=0.000966 Jy/beam
! Combined flux in latest and established models = 0.337358 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 257 components and 0.337358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136203Jy  sigma=0.452586
! Fit after  self-cal, rms=0.136202Jy  sigma=0.452577
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136202Jy  sigma=0.452577
! Fit after  self-cal, rms=0.137491Jy  sigma=0.452453
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.468 mas, bmaj=34.26 mas, bpa=-0.1166 degrees
! Estimated noise=2.17463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0019391 Jy
! Component: 100  -  total flux cleaned = -0.00220688 Jy
! Component: 150  -  total flux cleaned = -0.00224376 Jy
! Component: 200  -  total flux cleaned = -0.00224468 Jy
! Total flux subtracted in 200 components = -0.00224468 Jy
! Clean residual min=-0.003661 max=0.003361 Jy/beam
! Clean residual mean=0.000065 rms=0.001017 Jy/beam
! Combined flux in latest and established models = 0.335114 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 281 components and 0.335114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.137450Jy  sigma=0.452308
! Fit after  self-cal, rms=0.137461Jy  sigma=0.452286
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.60585e-05 Jy
! Component: 100  -  total flux cleaned = 5.70186e-05 Jy
! Component: 150  -  total flux cleaned = 5.65378e-05 Jy
! Component: 200  -  total flux cleaned = 5.66098e-05 Jy
! Total flux subtracted in 200 components = 5.66098e-05 Jy
! Clean residual min=-0.003588 max=0.003351 Jy/beam
! Clean residual mean=0.000065 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 0.33517 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 295 components and 0.33517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.137435Jy  sigma=0.452233
! Fit after  self-cal, rms=0.137439Jy  sigma=0.452222
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.727 mas, bmaj=18.07 mas, bpa=-16.59 degrees
! Estimated noise=1.97309 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.727 x 18.07 at -16.59 degrees (North through East)
! Clean map  min=-0.0033929  max=0.21967 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.831 mas, bmaj=15.72 mas, bpa=-17.77 degrees
! Estimated noise=3.0212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.17407 Jy
! Component: 100  -  total flux cleaned = 0.23517 Jy
! Component: 150  -  total flux cleaned = 0.26553 Jy
! Component: 200  -  total flux cleaned = 0.283017 Jy
! Total flux subtracted in 200 components = 0.283017 Jy
! Clean residual min=-0.009985 max=0.009511 Jy/beam
! Clean residual mean=0.000030 rms=0.002588 Jy/beam
! Combined flux in latest and established models = 0.283016 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 60 model components to the UV plane model.
! The established model now contains 60 components and 0.283016 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.727 mas, bmaj=18.07 mas, bpa=-16.59 degrees
! Estimated noise=1.97309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157482 Jy
! Component: 100  -  total flux cleaned = 0.0256271 Jy
! Component: 150  -  total flux cleaned = 0.0324237 Jy
! Component: 200  -  total flux cleaned = 0.0372656 Jy
! Total flux subtracted in 200 components = 0.0372656 Jy
! Clean residual min=-0.004064 max=0.004371 Jy/beam
! Clean residual mean=0.000001 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.320282 Jy
! Adding 102 model components to the UV plane model.
! The established model now contains 162 components and 0.320282 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.468 mas, bmaj=34.26 mas, bpa=-0.1166 degrees
! Estimated noise=2.17463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0047944 Jy
! Component: 100  -  total flux cleaned = 0.00778057 Jy
! Component: 150  -  total flux cleaned = 0.00980671 Jy
! Component: 200  -  total flux cleaned = 0.0112786 Jy
! Total flux subtracted in 200 components = 0.0112786 Jy
! Clean residual min=-0.003504 max=0.003025 Jy/beam
! Clean residual mean=0.000051 rms=0.000991 Jy/beam
! Combined flux in latest and established models = 0.331561 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000852718 Jy
! Component: 100  -  total flux cleaned = 0.00125504 Jy
! Component: 150  -  total flux cleaned = 0.00157102 Jy
! Component: 200  -  total flux cleaned = 0.00187196 Jy
! Total flux subtracted in 200 components = 0.00187196 Jy
! Clean residual min=-0.003412 max=0.002889 Jy/beam
! Clean residual mean=0.000059 rms=0.000973 Jy/beam
! Combined flux in latest and established models = 0.333433 Jy
! Adding 116 model components to the UV plane model.
! The established model now contains 267 components and 0.333433 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.727 mas, bmaj=18.07 mas, bpa=-16.59 degrees
! Estimated noise=1.97309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00068403 Jy
! Component: 100  -  total flux cleaned = 0.000680968 Jy
! Component: 150  -  total flux cleaned = 0.000828098 Jy
! Component: 200  -  total flux cleaned = 0.000964854 Jy
! Total flux subtracted in 200 components = 0.000964854 Jy
! Clean residual min=-0.003432 max=0.003370 Jy/beam
! Clean residual mean=0.000040 rms=0.000915 Jy/beam
! Combined flux in latest and established models = 0.334397 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 294 components and 0.334397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.137523Jy  sigma=0.452269
! Fit after  self-cal, rms=0.137469Jy  sigma=0.452210
wmodel J2141-3729_S_map.mod
! Writing 294 model components to file: J2141-3729_S_map.mod
wobs   J2141-3729_S_uvs.fits
! Writing UV FITS file: J2141-3729_S_uvs.fits
wwins  J2141-3729_S_map.win
! wwins: Wrote 2 windows to J2141-3729_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026314 Jy
! Component: 100  -  total flux cleaned = 0.000425963 Jy
! Component: 150  -  total flux cleaned = 0.000586267 Jy
! Component: 200  -  total flux cleaned = 0.000687532 Jy
! Component: 250  -  total flux cleaned = 0.000688144 Jy
! Component: 300  -  total flux cleaned = 0.000735236 Jy
! Component: 350  -  total flux cleaned = 0.000867843 Jy
! Component: 400  -  total flux cleaned = 0.00112698 Jy
! Component: 450  -  total flux cleaned = 0.00142314 Jy
! Component: 500  -  total flux cleaned = 0.0016706 Jy
! Component: 550  -  total flux cleaned = 0.0019926 Jy
! Component: 600  -  total flux cleaned = 0.00226623 Jy
! Component: 650  -  total flux cleaned = 0.00253322 Jy
! Component: 700  -  total flux cleaned = 0.00264503 Jy
! Component: 750  -  total flux cleaned = 0.0027558 Jy
! Component: 800  -  total flux cleaned = 0.00282734 Jy
! Component: 850  -  total flux cleaned = 0.00282769 Jy
! Component: 900  -  total flux cleaned = 0.00296535 Jy
! Component: 950  -  total flux cleaned = 0.00296518 Jy
! Component: 1000  -  total flux cleaned = 0.00299884 Jy
! Component: 1050  -  total flux cleaned = 0.00309832 Jy
! Component: 1100  -  total flux cleaned = 0.00322809 Jy
! Component: 1150  -  total flux cleaned = 0.00329245 Jy
! Component: 1200  -  total flux cleaned = 0.00335573 Jy
! Component: 1250  -  total flux cleaned = 0.00351183 Jy
! Component: 1300  -  total flux cleaned = 0.00357289 Jy
! Component: 1350  -  total flux cleaned = 0.00363345 Jy
! Component: 1400  -  total flux cleaned = 0.00366371 Jy
! Component: 1450  -  total flux cleaned = 0.00381261 Jy
! Component: 1500  -  total flux cleaned = 0.00395906 Jy
! Component: 1550  -  total flux cleaned = 0.00401705 Jy
! Component: 1600  -  total flux cleaned = 0.00415987 Jy
! Component: 1650  -  total flux cleaned = 0.00418783 Jy
! Component: 1700  -  total flux cleaned = 0.00438342 Jy
! Component: 1750  -  total flux cleaned = 0.0043833 Jy
! Component: 1800  -  total flux cleaned = 0.00443796 Jy
! Component: 1850  -  total flux cleaned = 0.0045189 Jy
! Component: 1900  -  total flux cleaned = 0.00467964 Jy
! Component: 1950  -  total flux cleaned = 0.00475932 Jy
! Component: 2000  -  total flux cleaned = 0.00483814 Jy
! Component: 2050  -  total flux cleaned = 0.00494169 Jy
! Component: 2100  -  total flux cleaned = 0.00501847 Jy
! Component: 2150  -  total flux cleaned = 0.00509437 Jy
! Component: 2200  -  total flux cleaned = 0.00506919 Jy
! Component: 2250  -  total flux cleaned = 0.00511912 Jy
! Component: 2300  -  total flux cleaned = 0.00521758 Jy
! Component: 2350  -  total flux cleaned = 0.00521711 Jy
! Component: 2400  -  total flux cleaned = 0.00524174 Jy
! Component: 2450  -  total flux cleaned = 0.00533796 Jy
! Component: 2500  -  total flux cleaned = 0.00531406 Jy
! Component: 2550  -  total flux cleaned = 0.00540885 Jy
! Component: 2600  -  total flux cleaned = 0.00550226 Jy
! Component: 2650  -  total flux cleaned = 0.00545554 Jy
! Component: 2700  -  total flux cleaned = 0.00550162 Jy
! Component: 2750  -  total flux cleaned = 0.00552432 Jy
! Component: 2800  -  total flux cleaned = 0.00559207 Jy
! Component: 2850  -  total flux cleaned = 0.00554718 Jy
! Component: 2900  -  total flux cleaned = 0.00556944 Jy
! Component: 2950  -  total flux cleaned = 0.00561336 Jy
! Component: 3000  -  total flux cleaned = 0.00559129 Jy
! Component: 3050  -  total flux cleaned = 0.0055483 Jy
! Component: 3100  -  total flux cleaned = 0.00557021 Jy
! Component: 3150  -  total flux cleaned = 0.00554893 Jy
! Component: 3200  -  total flux cleaned = 0.00559142 Jy
! Component: 3250  -  total flux cleaned = 0.00554929 Jy
! Component: 3300  -  total flux cleaned = 0.00557028 Jy
! Component: 3350  -  total flux cleaned = 0.00557019 Jy
! Component: 3400  -  total flux cleaned = 0.00552873 Jy
! Component: 3450  -  total flux cleaned = 0.00548791 Jy
! Component: 3500  -  total flux cleaned = 0.00554888 Jy
! Component: 3550  -  total flux cleaned = 0.0055289 Jy
! Component: 3600  -  total flux cleaned = 0.00556891 Jy
! Component: 3650  -  total flux cleaned = 0.00550914 Jy
! Component: 3700  -  total flux cleaned = 0.00544972 Jy
! Component: 3750  -  total flux cleaned = 0.00539075 Jy
! Component: 3800  -  total flux cleaned = 0.00537129 Jy
! Component: 3850  -  total flux cleaned = 0.00539082 Jy
! Component: 3900  -  total flux cleaned = 0.00539078 Jy
! Component: 3950  -  total flux cleaned = 0.00533287 Jy
! Component: 4000  -  total flux cleaned = 0.00529484 Jy
! Component: 4050  -  total flux cleaned = 0.00533275 Jy
! Total flux subtracted in 4096 components = 0.00521931 Jy
! Clean residual min=-0.001524 max=0.001106 Jy/beam
! Clean residual mean=0.000002 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.339617 Jy
keep
! Adding 319 model components to the UV plane model.
! The established model now contains 613 components and 0.339617 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2141-3729_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.727 x 18.07 at -16.59 degrees (North through East)
! Clean map  min=-0.0022491  max=0.22283 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2141-3729_S_map.fits
wmodel /image_prod/ug002_uva//J2141-3729_S_map.mod
! Writing 613 model components to file: /image_prod/ug002_uva//J2141-3729_S_map.mod
wobs   /image_prod/ug002_uva//J2141-3729_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2141-3729_S_uvs.fits
wwins  /image_prod/ug002_uva//J2141-3729_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J2141-3729_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.222826 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000368291 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.495846 0.495846 0.991692 1.98338 3.96677 7.93353 15.8671 31.7341 63.4683
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.222 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  605.026 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2141-3729_S_dfm.log closed on Thu Mar  5 05:20:45 2020