! Started logfile: /image_prod/ug002_uva//J2133+1443_S_dfm.log on Thu Mar 5 05:17:14 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2133+1443_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2133+1443_S_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.771111 visibilities/baseline/integration-bin. ! Found source: J2133+1443 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6246 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2133+1443_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009979Jy sigma=8.136775 ! Fit after self-cal, rms=0.873350Jy sigma=6.984811 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=6.924 mas, bpa=-4.069 degrees ! Estimated noise=1.84609 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104526 Jy ! Component: 100 - total flux cleaned = 0.128024 Jy ! Total flux subtracted in 100 components = 0.128024 Jy ! Clean residual min=-0.005781 max=0.009050 Jy/beam ! Clean residual mean=0.000008 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.128024 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.128024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070892Jy sigma=0.448569 ! Fit after self-cal, rms=0.070922Jy sigma=0.448224 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=7.702 mas, bpa=-3.784 degrees ! Estimated noise=1.17134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00930965 Jy ! Component: 100 - total flux cleaned = 0.0136825 Jy ! Component: 150 - total flux cleaned = 0.0154716 Jy ! Component: 200 - total flux cleaned = 0.0157065 Jy ! Total flux subtracted in 200 components = 0.0157065 Jy ! Clean residual min=-0.003850 max=0.005770 Jy/beam ! Clean residual mean=0.000007 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.143731 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.143731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069835Jy sigma=0.436418 ! Fit after self-cal, rms=0.069828Jy sigma=0.436302 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 7.702 at -3.784 degrees (North through East) ! Clean map min=-0.00366 max=0.1297 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.00 HN 0.99 KP 1.03 ! LA 1.00 MK 0.98 OV 0.95 PT 1.00 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.00 HN 1.01 KP 0.97 ! LA 0.97 MK 0.97 OV 0.97 PT 1.03 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.36 FD 0.99 HN 0.99 KP 1.02 ! LA 1.00 MK 0.97 OV 0.95 PT 1.00 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.069828Jy sigma=0.436302 ! Fit after self-cal, rms=0.074648Jy sigma=0.430550 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=7.766 mas, bpa=-3.851 degrees ! Estimated noise=1.16873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000617995 Jy ! Component: 100 - total flux cleaned = -0.000745345 Jy ! Component: 150 - total flux cleaned = -0.00088775 Jy ! Component: 200 - total flux cleaned = -0.000982636 Jy ! Total flux subtracted in 200 components = -0.000982636 Jy ! Clean residual min=-0.003848 max=0.004530 Jy/beam ! Clean residual mean=0.000005 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.142748 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.142748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074575Jy sigma=0.430231 ! Fit after self-cal, rms=0.074636Jy sigma=0.430156 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074636Jy sigma=0.430156 ! Fit after self-cal, rms=0.091992Jy sigma=0.416347 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=7.736 mas, bpa=-3.817 degrees ! Estimated noise=1.17009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000884198 Jy ! Component: 100 - total flux cleaned = -0.000966956 Jy ! Component: 150 - total flux cleaned = -0.00103967 Jy ! Component: 200 - total flux cleaned = -0.0011318 Jy ! Total flux subtracted in 200 components = -0.0011318 Jy ! Clean residual min=-0.001802 max=0.001967 Jy/beam ! Clean residual mean=0.000001 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.141616 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.141616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091943Jy sigma=0.415969 ! Fit after self-cal, rms=0.092091Jy sigma=0.415844 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189856 Jy ! Component: 100 - total flux cleaned = -0.00013859 Jy ! Component: 150 - total flux cleaned = -0.0001156 Jy ! Component: 200 - total flux cleaned = -0.000114885 Jy ! Total flux subtracted in 200 components = -0.000114885 Jy ! Clean residual min=-0.001706 max=0.001919 Jy/beam ! Clean residual mean=0.000001 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.141501 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.141501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092069Jy sigma=0.415700 ! Fit after self-cal, rms=0.092073Jy sigma=0.415675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092073Jy sigma=0.415675 ! Fit after self-cal, rms=0.094948Jy sigma=0.415577 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=7.742 mas, bpa=-3.892 degrees ! Estimated noise=1.17055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000568443 Jy ! Component: 100 - total flux cleaned = -0.000592453 Jy ! Component: 150 - total flux cleaned = -0.00061339 Jy ! Component: 200 - total flux cleaned = -0.000612861 Jy ! Total flux subtracted in 200 components = -0.000612861 Jy ! Clean residual min=-0.001634 max=0.001899 Jy/beam ! Clean residual mean=0.000000 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.140889 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.140889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094925Jy sigma=0.415438 ! Fit after self-cal, rms=0.094943Jy sigma=0.415421 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-126.5, -74). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319462 Jy ! Component: 100 - total flux cleaned = -7.02607e-05 Jy ! Component: 150 - total flux cleaned = -0.000391778 Jy ! Component: 200 - total flux cleaned = -0.00057161 Jy ! Total flux subtracted in 200 components = -0.00057161 Jy ! Clean residual min=-0.001727 max=0.001555 Jy/beam ! Clean residual mean=0.000000 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.140317 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.140317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094872Jy sigma=0.415035 ! Fit after self-cal, rms=0.094860Jy sigma=0.414990 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094860Jy sigma=0.414990 ! Fit after self-cal, rms=0.096260Jy sigma=0.414905 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.86 mas, bmaj=11.91 mas, bpa=-2.054 degrees ! Estimated noise=1.36122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234443 Jy ! Component: 100 - total flux cleaned = -0.000373648 Jy ! Component: 150 - total flux cleaned = -0.000392111 Jy ! Component: 200 - total flux cleaned = -0.000391779 Jy ! Total flux subtracted in 200 components = -0.000391779 Jy ! Clean residual min=-0.001628 max=0.001572 Jy/beam ! Clean residual mean=0.000002 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.139925 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.139925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.096240Jy sigma=0.414809 ! Fit after self-cal, rms=0.096243Jy sigma=0.414797 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.1864e-05 Jy ! Component: 100 - total flux cleaned = -3.6714e-05 Jy ! Component: 150 - total flux cleaned = -4.99944e-05 Jy ! Component: 200 - total flux cleaned = -6.16626e-05 Jy ! Total flux subtracted in 200 components = -6.16626e-05 Jy ! Clean residual min=-0.001615 max=0.001570 Jy/beam ! Clean residual mean=0.000003 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.139864 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 86 components and 0.139864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.096234Jy sigma=0.414776 ! Fit after self-cal, rms=0.096230Jy sigma=0.414769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=7.751 mas, bpa=-3.972 degrees ! Estimated noise=1.17087 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 7.751 at -3.972 degrees (North through East) ! Clean map min=-0.0015471 max=0.13091 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.805 mas, bmaj=6.927 mas, bpa=-3.89 degrees ! Estimated noise=1.82531 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103285 Jy ! Component: 100 - total flux cleaned = 0.126929 Jy ! Component: 150 - total flux cleaned = 0.135098 Jy ! Component: 200 - total flux cleaned = 0.138549 Jy ! Total flux subtracted in 200 components = 0.138549 Jy ! Clean residual min=-0.003175 max=0.003065 Jy/beam ! Clean residual mean=0.000002 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.138549 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.138549 Jy ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=7.751 mas, bpa=-3.972 degrees ! Estimated noise=1.17087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012976 Jy ! Component: 100 - total flux cleaned = 0.00137117 Jy ! Component: 150 - total flux cleaned = 0.00127455 Jy ! Component: 200 - total flux cleaned = 0.00119092 Jy ! Total flux subtracted in 200 components = 0.00119092 Jy ! Clean residual min=-0.001655 max=0.001674 Jy/beam ! Clean residual mean=-0.000001 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.13974 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 38 components and 0.13974 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.86 mas, bmaj=11.91 mas, bpa=-2.054 degrees ! Estimated noise=1.36122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135239 Jy ! Component: 100 - total flux cleaned = 8.50067e-05 Jy ! Component: 150 - total flux cleaned = 6.48005e-05 Jy ! Component: 200 - total flux cleaned = 2.9929e-05 Jy ! Total flux subtracted in 200 components = 2.9929e-05 Jy ! Clean residual min=-0.001677 max=0.001598 Jy/beam ! Clean residual mean=0.000001 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.13977 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.47962e-05 Jy ! Component: 100 - total flux cleaned = -2.84664e-05 Jy ! Component: 150 - total flux cleaned = -4.07334e-05 Jy ! Component: 200 - total flux cleaned = -5.14614e-05 Jy ! Total flux subtracted in 200 components = -5.14614e-05 Jy ! Clean residual min=-0.001651 max=0.001581 Jy/beam ! Clean residual mean=0.000002 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.139718 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.139718 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=7.751 mas, bpa=-3.972 degrees ! Estimated noise=1.17087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.56174e-05 Jy ! Component: 100 - total flux cleaned = -0.000116801 Jy ! Component: 150 - total flux cleaned = -0.000116661 Jy ! Component: 200 - total flux cleaned = -9.93185e-05 Jy ! Total flux subtracted in 200 components = -9.93185e-05 Jy ! Clean residual min=-0.001639 max=0.001583 Jy/beam ! Clean residual mean=0.000002 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.139619 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.139619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.096234Jy sigma=0.414812 ! Fit after self-cal, rms=0.096227Jy sigma=0.414794 wmodel J2133+1443_S_map.mod ! Writing 74 model components to file: J2133+1443_S_map.mod wobs J2133+1443_S_uvs.fits ! Writing UV FITS file: J2133+1443_S_uvs.fits wwins J2133+1443_S_map.win ! wwins: Wrote 2 windows to J2133+1443_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243418 Jy ! Component: 100 - total flux cleaned = -0.000243703 Jy ! Component: 150 - total flux cleaned = -0.00037361 Jy ! Component: 200 - total flux cleaned = -0.000423451 Jy ! Component: 250 - total flux cleaned = -0.000447439 Jy ! Component: 300 - total flux cleaned = -0.000423957 Jy ! Component: 350 - total flux cleaned = -0.000424304 Jy ! Component: 400 - total flux cleaned = -0.000402192 Jy ! Component: 450 - total flux cleaned = -0.000424461 Jy ! Component: 500 - total flux cleaned = -0.000359475 Jy ! Component: 550 - total flux cleaned = -0.000359319 Jy ! Component: 600 - total flux cleaned = -0.000317252 Jy ! Component: 650 - total flux cleaned = -0.000297023 Jy ! Component: 700 - total flux cleaned = -0.000236898 Jy ! Component: 750 - total flux cleaned = -0.000217109 Jy ! Component: 800 - total flux cleaned = -0.000217411 Jy ! Component: 850 - total flux cleaned = -0.000255311 Jy ! Component: 900 - total flux cleaned = -0.000198481 Jy ! Component: 950 - total flux cleaned = -0.000217029 Jy ! Component: 1000 - total flux cleaned = -0.000180497 Jy ! Component: 1050 - total flux cleaned = -0.000180561 Jy ! Component: 1100 - total flux cleaned = -0.000110303 Jy ! Component: 1150 - total flux cleaned = -0.00011057 Jy ! Component: 1200 - total flux cleaned = -9.37072e-05 Jy ! Component: 1250 - total flux cleaned = -0.000144519 Jy ! Component: 1300 - total flux cleaned = -0.000127636 Jy ! Component: 1350 - total flux cleaned = -0.000111033 Jy ! Component: 1400 - total flux cleaned = -7.84644e-05 Jy ! Component: 1450 - total flux cleaned = -4.62147e-05 Jy ! Component: 1500 - total flux cleaned = -3.0295e-05 Jy ! Component: 1550 - total flux cleaned = -3.03834e-05 Jy ! Component: 1600 - total flux cleaned = 1.64332e-05 Jy ! Component: 1650 - total flux cleaned = 6.25908e-05 Jy ! Component: 1700 - total flux cleaned = 7.78053e-05 Jy ! Component: 1750 - total flux cleaned = 0.000122854 Jy ! Component: 1800 - total flux cleaned = 0.000167545 Jy ! Component: 1850 - total flux cleaned = 0.000152878 Jy ! Component: 1900 - total flux cleaned = 0.000269286 Jy ! Component: 1950 - total flux cleaned = 0.00035555 Jy ! Component: 2000 - total flux cleaned = 0.000327203 Jy ! Component: 2050 - total flux cleaned = 0.000425716 Jy ! Component: 2100 - total flux cleaned = 0.000425907 Jy ! Component: 2150 - total flux cleaned = 0.000453688 Jy ! Component: 2200 - total flux cleaned = 0.000563417 Jy ! Component: 2250 - total flux cleaned = 0.000577186 Jy ! Component: 2300 - total flux cleaned = 0.000631084 Jy ! Component: 2350 - total flux cleaned = 0.000710945 Jy ! Component: 2400 - total flux cleaned = 0.000711031 Jy ! Component: 2450 - total flux cleaned = 0.000763453 Jy ! Component: 2500 - total flux cleaned = 0.000802373 Jy ! Component: 2550 - total flux cleaned = 0.000828203 Jy ! Component: 2600 - total flux cleaned = 0.000879192 Jy ! Component: 2650 - total flux cleaned = 0.000917029 Jy ! Component: 2700 - total flux cleaned = 0.000892032 Jy ! Component: 2750 - total flux cleaned = 0.000954205 Jy ! Component: 2800 - total flux cleaned = 0.000991162 Jy ! Component: 2850 - total flux cleaned = 0.000966643 Jy ! Component: 2900 - total flux cleaned = 0.000990848 Jy ! Component: 2950 - total flux cleaned = 0.00106287 Jy ! Component: 3000 - total flux cleaned = 0.00103903 Jy ! Component: 3050 - total flux cleaned = 0.00100356 Jy ! Component: 3100 - total flux cleaned = 0.00110932 Jy ! Component: 3150 - total flux cleaned = 0.00109777 Jy ! Component: 3200 - total flux cleaned = 0.00117863 Jy ! Component: 3250 - total flux cleaned = 0.00120143 Jy ! Component: 3300 - total flux cleaned = 0.00117866 Jy ! Component: 3350 - total flux cleaned = 0.00125802 Jy ! Component: 3400 - total flux cleaned = 0.00131424 Jy ! Component: 3450 - total flux cleaned = 0.00131422 Jy ! Component: 3500 - total flux cleaned = 0.00135856 Jy ! Component: 3550 - total flux cleaned = 0.00139151 Jy ! Component: 3600 - total flux cleaned = 0.0014025 Jy ! Component: 3650 - total flux cleaned = 0.00141337 Jy ! Component: 3700 - total flux cleaned = 0.0013917 Jy ! Component: 3750 - total flux cleaned = 0.00139175 Jy ! Component: 3800 - total flux cleaned = 0.00142386 Jy ! Component: 3850 - total flux cleaned = 0.00142395 Jy ! Component: 3900 - total flux cleaned = 0.00147671 Jy ! Component: 3950 - total flux cleaned = 0.00147672 Jy ! Component: 4000 - total flux cleaned = 0.00144548 Jy ! Component: 4050 - total flux cleaned = 0.00146622 Jy ! Total flux subtracted in 4096 components = 0.00148687 Jy ! Clean residual min=-0.000655 max=0.000616 Jy/beam ! Clean residual mean=0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.141106 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 343 components and 0.141106 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2133+1443_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 7.751 at -3.972 degrees (North through East) ! Clean map min=-0.0016367 max=0.13088 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2133+1443_S_map.fits wmodel /image_prod/ug002_uva//J2133+1443_S_map.mod ! Writing 343 model components to file: /image_prod/ug002_uva//J2133+1443_S_map.mod wobs /image_prod/ug002_uva//J2133+1443_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2133+1443_S_uvs.fits wwins /image_prod/ug002_uva//J2133+1443_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J2133+1443_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.130884 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185308 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.424746 0.424746 0.849491 1.69898 3.39796 6.79593 13.5919 27.1837 54.3674 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.13 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 706.305 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2133+1443_S_dfm.log closed on Thu Mar 5 05:17:17 2020