! Started logfile: /image_prod/ug002_uva//J2129-1538_X_n_dfm.log on Thu Mar 5 05:16:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2129-1538_X_n_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2129-1538_X_n_uva.fits ! AN table 1: 27 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.742798 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8664 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2129-1538_X_n] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.553346Jy sigma=7.987705 ! Fit after self-cal, rms=0.417326Jy sigma=2.446114 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6006 mas, bmaj=1.518 mas, bpa=-5.778 degrees ! Estimated noise=1.90719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.797835 Jy ! Component: 100 - total flux cleaned = 1.1199 Jy ! Total flux subtracted in 100 components = 1.1199 Jy ! Clean residual min=-0.050573 max=0.143982 Jy/beam ! Clean residual mean=0.000043 rms=0.011179 Jy/beam ! Combined flux in latest and established models = 1.1199 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.1199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.268244Jy sigma=1.329990 ! Fit after self-cal, rms=0.267871Jy sigma=1.328659 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15459 Jy ! Component: 100 - total flux cleaned = 0.238802 Jy ! Total flux subtracted in 100 components = 0.238802 Jy ! Clean residual min=-0.024549 max=0.042170 Jy/beam ! Clean residual mean=0.000017 rms=0.004153 Jy/beam ! Combined flux in latest and established models = 1.3587 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 1.3587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107333Jy sigma=0.575922 ! Fit after self-cal, rms=0.106916Jy sigma=0.574347 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489217 Jy ! Component: 100 - total flux cleaned = 0.0733447 Jy ! Total flux subtracted in 100 components = 0.0733447 Jy ! Clean residual min=-0.017265 max=0.016561 Jy/beam ! Clean residual mean=0.000009 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 1.43204 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 14 components and 1.43204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079304Jy sigma=0.449127 ! Fit after self-cal, rms=0.079024Jy sigma=0.448352 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7271 mas, bmaj=1.724 mas, bpa=-6.021 degrees ! Estimated noise=1.45984 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120007 Jy ! Component: 100 - total flux cleaned = 0.0148342 Jy ! Component: 150 - total flux cleaned = 0.0171539 Jy ! Component: 200 - total flux cleaned = 0.0174833 Jy ! Total flux subtracted in 200 components = 0.0174833 Jy ! Clean residual min=-0.010369 max=0.010213 Jy/beam ! Clean residual mean=0.000017 rms=0.001652 Jy/beam ! Combined flux in latest and established models = 1.44953 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 1.44953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074065Jy sigma=0.420969 ! Fit after self-cal, rms=0.073843Jy sigma=0.420246 ! Inverting map ! Added new window around map position (12.4, 12.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00611669 Jy ! Component: 100 - total flux cleaned = 0.00748279 Jy ! Component: 150 - total flux cleaned = 0.00888298 Jy ! Component: 200 - total flux cleaned = 0.00928656 Jy ! Total flux subtracted in 200 components = 0.00928656 Jy ! Clean residual min=-0.007986 max=0.007686 Jy/beam ! Clean residual mean=0.000011 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 1.45881 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 1.45881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072061Jy sigma=0.410786 ! Fit after self-cal, rms=0.071977Jy sigma=0.410351 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7271 x 1.724 at -6.021 degrees (North through East) ! Clean map min=-0.0061699 max=1.0655 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 KP 0.98 LA 1.01 ! MK 0.98 NL 0.97 OV 1.01 PT 0.98 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 KP 1.01 LA 1.02 ! MK 0.96 NL 0.98 OV 0.99 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 KP 0.99 LA 1.03 ! MK 1.00 NL 1.03 OV 1.00 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 KP 0.99 LA 1.02 ! MK 1.00 NL 0.98 OV 1.01 PT 0.98 ! SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 KP 0.99 LA 1.03 ! MK 0.98 NL 0.98 OV 1.01 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 KP 1.01 LA 1.02 ! MK 0.98 NL 1.00 OV 1.01 PT 0.99 ! SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 KP 1.00 LA 1.02 ! MK 0.98 NL 1.01 OV 1.01 PT 1.00 ! SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 KP 0.99 LA 1.01 ! MK 1.01 NL 1.03 OV 0.98 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 KP 1.00 LA 1.00 ! MK 1.00 NL 1.00 OV 0.99 PT 1.02 ! SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 KP 0.99 LA 1.01 ! MK 0.98 NL 0.98 OV 1.04 PT 1.00 ! SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 KP 0.99 LA 0.99 ! MK 0.97 NL 1.03 OV 0.99 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 KP 1.01 LA 1.00 ! MK 0.99 NL 1.01 OV 1.01 PT 0.97 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.071977Jy sigma=0.410351 ! Fit after self-cal, rms=0.066492Jy sigma=0.385207 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7241 mas, bmaj=1.72 mas, bpa=-6.069 degrees ! Estimated noise=1.45169 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.8, -15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408192 Jy ! Component: 100 - total flux cleaned = 0.00524585 Jy ! Component: 150 - total flux cleaned = 0.00557841 Jy ! Component: 200 - total flux cleaned = 0.00544838 Jy ! Total flux subtracted in 200 components = 0.00544838 Jy ! Clean residual min=-0.005946 max=0.005184 Jy/beam ! Clean residual mean=0.000006 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 1.46426 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 56 components and 1.46426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065754Jy sigma=0.379384 ! Fit after self-cal, rms=0.065748Jy sigma=0.379248 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065748Jy sigma=0.379248 ! Fit after self-cal, rms=0.064539Jy sigma=0.372710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7229 mas, bmaj=1.723 mas, bpa=-6.06 degrees ! Estimated noise=1.45275 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112433 Jy ! Component: 100 - total flux cleaned = 0.00124113 Jy ! Component: 150 - total flux cleaned = 0.00113436 Jy ! Component: 200 - total flux cleaned = 0.00113494 Jy ! Total flux subtracted in 200 components = 0.00113494 Jy ! Clean residual min=-0.004194 max=0.004619 Jy/beam ! Clean residual mean=0.000004 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 1.4654 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 1.46539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064198Jy sigma=0.370328 ! Fit after self-cal, rms=0.064188Jy sigma=0.370260 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.6, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041668 Jy ! Component: 100 - total flux cleaned = 0.00533544 Jy ! Component: 150 - total flux cleaned = 0.00593162 Jy ! Component: 200 - total flux cleaned = 0.00608991 Jy ! Total flux subtracted in 200 components = 0.00608991 Jy ! Clean residual min=-0.003786 max=0.003998 Jy/beam ! Clean residual mean=0.000002 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 1.47148 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 86 components and 1.47149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063861Jy sigma=0.368435 ! Fit after self-cal, rms=0.063850Jy sigma=0.368367 ! Inverting map ! Added new window around map position (-10.2, 36.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311498 Jy ! Component: 100 - total flux cleaned = 0.00428448 Jy ! Component: 150 - total flux cleaned = 0.00488062 Jy ! Component: 200 - total flux cleaned = 0.00536402 Jy ! Total flux subtracted in 200 components = 0.00536402 Jy ! Clean residual min=-0.003313 max=0.003291 Jy/beam ! Clean residual mean=0.000001 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 1.47685 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 1.47685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063642Jy sigma=0.366851 ! Fit after self-cal, rms=0.063620Jy sigma=0.366771 ! Inverting map ! Added new window around map position (-8.6, -33.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253972 Jy ! Component: 100 - total flux cleaned = 0.00312787 Jy ! Component: 150 - total flux cleaned = 0.00346353 Jy ! Component: 200 - total flux cleaned = 0.0035277 Jy ! Total flux subtracted in 200 components = 0.0035277 Jy ! Clean residual min=-0.003009 max=0.002666 Jy/beam ! Clean residual mean=0.000001 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 1.48038 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 118 components and 1.48038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063450Jy sigma=0.365739 ! Fit after self-cal, rms=0.063447Jy sigma=0.365714 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063447Jy sigma=0.365714 ! Fit after self-cal, rms=0.063194Jy sigma=0.363518 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7226 mas, bmaj=1.724 mas, bpa=-6.056 degrees ! Estimated noise=1.45311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476483 Jy ! Component: 100 - total flux cleaned = 0.000159232 Jy ! Component: 150 - total flux cleaned = -0.000307262 Jy ! Component: 200 - total flux cleaned = -0.000637849 Jy ! Total flux subtracted in 200 components = -0.000637849 Jy ! Clean residual min=-0.002599 max=0.002524 Jy/beam ! Clean residual mean=0.000001 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 1.47974 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 136 components and 1.47974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063095Jy sigma=0.362916 ! Fit after self-cal, rms=0.063094Jy sigma=0.362905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147091 Jy ! Component: 100 - total flux cleaned = -0.000446456 Jy ! Component: 150 - total flux cleaned = -0.000781023 Jy ! Component: 200 - total flux cleaned = -0.00101003 Jy ! Total flux subtracted in 200 components = -0.00101003 Jy ! Clean residual min=-0.002485 max=0.002390 Jy/beam ! Clean residual mean=0.000001 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 1.47873 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 143 components and 1.47873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063035Jy sigma=0.362538 ! Fit after self-cal, rms=0.063036Jy sigma=0.362533 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063036Jy sigma=0.362533 ! Fit after self-cal, rms=0.063054Jy sigma=0.362501 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.155 mas, bmaj=3.769 mas, bpa=-5.986 degrees ! Estimated noise=2.355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000576565 Jy ! Component: 100 - total flux cleaned = -0.00113324 Jy ! Component: 150 - total flux cleaned = -0.00128597 Jy ! Component: 200 - total flux cleaned = -0.00139094 Jy ! Total flux subtracted in 200 components = -0.00139094 Jy ! Clean residual min=-0.002410 max=0.002500 Jy/beam ! Clean residual mean=0.000003 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 1.47734 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 171 components and 1.47734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063031Jy sigma=0.362429 ! Fit after self-cal, rms=0.063027Jy sigma=0.362419 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.12942e-06 Jy ! Component: 100 - total flux cleaned = -6.09033e-05 Jy ! Component: 150 - total flux cleaned = -0.000121794 Jy ! Component: 200 - total flux cleaned = -0.000267586 Jy ! Total flux subtracted in 200 components = -0.000267586 Jy ! Clean residual min=-0.002325 max=0.002451 Jy/beam ! Clean residual mean=0.000003 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 1.47707 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 178 components and 1.47707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063013Jy sigma=0.362401 ! Fit after self-cal, rms=0.063012Jy sigma=0.362398 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7225 mas, bmaj=1.724 mas, bpa=-6.054 degrees ! Estimated noise=1.4535 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7225 x 1.724 at -6.054 degrees (North through East) ! Clean map min=-0.0055764 max=1.0621 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063012Jy sigma=0.362398 ! Fit after self-cal, rms=0.059513Jy sigma=0.326565 ! Inverting map and beam ! Estimated beam: bmin=0.7224 mas, bmaj=1.724 mas, bpa=-6.075 degrees ! Estimated noise=1.45325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272995 Jy ! Component: 100 - total flux cleaned = 0.000272754 Jy ! Component: 150 - total flux cleaned = 0.000273948 Jy ! Component: 200 - total flux cleaned = 0.000233767 Jy ! Total flux subtracted in 200 components = 0.000233767 Jy ! Clean residual min=-0.002371 max=0.002322 Jy/beam ! Clean residual mean=0.000001 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 1.4773 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 191 components and 1.4773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059460Jy sigma=0.326229 ! Fit after self-cal, rms=0.059461Jy sigma=0.326225 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.07885e-06 Jy ! Component: 100 - total flux cleaned = -7.20804e-05 Jy ! Component: 150 - total flux cleaned = -0.000219569 Jy ! Component: 200 - total flux cleaned = -0.000397269 Jy ! Total flux subtracted in 200 components = -0.000397269 Jy ! Clean residual min=-0.002302 max=0.002290 Jy/beam ! Clean residual mean=0.000001 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 1.47691 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 198 components and 1.47691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059425Jy sigma=0.325987 ! Fit after self-cal, rms=0.059426Jy sigma=0.325985 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059426Jy sigma=0.325985 ! Fit after self-cal, rms=0.059440Jy sigma=0.325969 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5976 mas, bmaj=1.521 mas, bpa=-5.847 degrees ! Estimated noise=1.89249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.79312 Jy ! Component: 100 - total flux cleaned = 1.11541 Jy ! Component: 150 - total flux cleaned = 1.2709 Jy ! Component: 200 - total flux cleaned = 1.35498 Jy ! Total flux subtracted in 200 components = 1.35498 Jy ! Clean residual min=-0.023620 max=0.041896 Jy/beam ! Clean residual mean=0.000015 rms=0.003966 Jy/beam ! Combined flux in latest and established models = 1.35498 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.35498 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7223 mas, bmaj=1.724 mas, bpa=-6.071 degrees ! Estimated noise=1.45347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0555724 Jy ! Component: 100 - total flux cleaned = 0.0827032 Jy ! Component: 150 - total flux cleaned = 0.0925452 Jy ! Component: 200 - total flux cleaned = 0.0967992 Jy ! Total flux subtracted in 200 components = 0.0967992 Jy ! Clean residual min=-0.008875 max=0.009858 Jy/beam ! Clean residual mean=0.000008 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 1.45178 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 1.45178 Jy ! Inverting map ! Added new window around map position (0.8, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330307 Jy ! Component: 100 - total flux cleaned = 0.00597931 Jy ! Component: 150 - total flux cleaned = 0.00860471 Jy ! Component: 200 - total flux cleaned = 0.0106715 Jy ! Total flux subtracted in 200 components = 0.0106715 Jy ! Clean residual min=-0.005413 max=0.004460 Jy/beam ! Clean residual mean=0.000006 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 1.46245 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 1.46245 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.155 mas, bmaj=3.769 mas, bpa=-6 degrees ! Estimated noise=2.35587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00441282 Jy ! Component: 100 - total flux cleaned = 0.00665994 Jy ! Component: 150 - total flux cleaned = 0.00834638 Jy ! Component: 200 - total flux cleaned = 0.00942045 Jy ! Total flux subtracted in 200 components = 0.00942045 Jy ! Clean residual min=-0.003178 max=0.003450 Jy/beam ! Clean residual mean=0.000009 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 1.47187 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000782905 Jy ! Component: 100 - total flux cleaned = 0.00132941 Jy ! Component: 150 - total flux cleaned = 0.00182726 Jy ! Component: 200 - total flux cleaned = 0.00228362 Jy ! Total flux subtracted in 200 components = 0.00228362 Jy ! Clean residual min=-0.002783 max=0.003080 Jy/beam ! Clean residual mean=0.000007 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 1.47415 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 70 components and 1.47415 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7223 mas, bmaj=1.724 mas, bpa=-6.071 degrees ! Estimated noise=1.45347 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337244 Jy ! Component: 100 - total flux cleaned = 0.000844367 Jy ! Component: 150 - total flux cleaned = 0.0015982 Jy ! Component: 200 - total flux cleaned = 0.00229431 Jy ! Total flux subtracted in 200 components = 0.00229431 Jy ! Clean residual min=-0.003554 max=0.003213 Jy/beam ! Clean residual mean=0.000003 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 1.47644 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 86 components and 1.47644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060339Jy sigma=0.332660 ! Fit after self-cal, rms=0.060310Jy sigma=0.332359 wmodel J2129-1538_X_n_map.mod ! Writing 86 model components to file: J2129-1538_X_n_map.mod wobs J2129-1538_X_n_uvs.fits ! Writing UV FITS file: J2129-1538_X_n_uvs.fits wwins J2129-1538_X_n_map.win ! wwins: Wrote 8 windows to J2129-1538_X_n_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131667 Jy ! Component: 100 - total flux cleaned = -0.0010899 Jy ! Component: 150 - total flux cleaned = -0.000873315 Jy ! Component: 200 - total flux cleaned = -0.000770345 Jy ! Component: 250 - total flux cleaned = -0.000721054 Jy ! Component: 300 - total flux cleaned = -0.000672583 Jy ! Component: 350 - total flux cleaned = -0.000532391 Jy ! Component: 400 - total flux cleaned = -0.000487259 Jy ! Component: 450 - total flux cleaned = -0.000444305 Jy ! Component: 500 - total flux cleaned = -0.000358757 Jy ! Component: 550 - total flux cleaned = -0.000400325 Jy ! Component: 600 - total flux cleaned = -0.000357713 Jy ! Component: 650 - total flux cleaned = -0.000398274 Jy ! Component: 700 - total flux cleaned = -0.000358044 Jy ! Component: 750 - total flux cleaned = -0.00031884 Jy ! Component: 800 - total flux cleaned = -0.000280719 Jy ! Component: 850 - total flux cleaned = -0.00028175 Jy ! Component: 900 - total flux cleaned = -0.000208502 Jy ! Component: 950 - total flux cleaned = -0.000243768 Jy ! Component: 1000 - total flux cleaned = -0.000173553 Jy ! Component: 1050 - total flux cleaned = -0.000208042 Jy ! Component: 1100 - total flux cleaned = -7.14388e-05 Jy ! Component: 1150 - total flux cleaned = 6.32847e-05 Jy ! Component: 1200 - total flux cleaned = 0.000195014 Jy ! Component: 1250 - total flux cleaned = 0.000260084 Jy ! Component: 1300 - total flux cleaned = 0.000228072 Jy ! Component: 1350 - total flux cleaned = 0.000259731 Jy ! Component: 1400 - total flux cleaned = 0.000165909 Jy ! Component: 1450 - total flux cleaned = 0.000135707 Jy ! Component: 1500 - total flux cleaned = 0.000105607 Jy ! Component: 1550 - total flux cleaned = 0.000105361 Jy ! Component: 1600 - total flux cleaned = -4.14464e-05 Jy ! Component: 1650 - total flux cleaned = -1.17856e-05 Jy ! Component: 1700 - total flux cleaned = -0.000155025 Jy ! Component: 1750 - total flux cleaned = -0.000126031 Jy ! Component: 1800 - total flux cleaned = -0.000125245 Jy ! Component: 1850 - total flux cleaned = -0.000125458 Jy ! Component: 1900 - total flux cleaned = -0.000207452 Jy ! Component: 1950 - total flux cleaned = -0.000261735 Jy ! Component: 2000 - total flux cleaned = -0.000396029 Jy ! Component: 2050 - total flux cleaned = -0.000474796 Jy ! Component: 2100 - total flux cleaned = -0.000526929 Jy ! Component: 2150 - total flux cleaned = -0.000553454 Jy ! Component: 2200 - total flux cleaned = -0.000553418 Jy ! Component: 2250 - total flux cleaned = -0.000654918 Jy ! Component: 2300 - total flux cleaned = -0.000629943 Jy ! Component: 2350 - total flux cleaned = -0.000704177 Jy ! Component: 2400 - total flux cleaned = -0.000531731 Jy ! Component: 2450 - total flux cleaned = -0.000385229 Jy ! Component: 2500 - total flux cleaned = -0.000457469 Jy ! Component: 2550 - total flux cleaned = -0.000504982 Jy ! Component: 2600 - total flux cleaned = -0.000457772 Jy ! Component: 2650 - total flux cleaned = -0.0004109 Jy ! Component: 2700 - total flux cleaned = -0.000410991 Jy ! Component: 2750 - total flux cleaned = -0.000364797 Jy ! Component: 2800 - total flux cleaned = -0.000342047 Jy ! Component: 2850 - total flux cleaned = -0.000319048 Jy ! Component: 2900 - total flux cleaned = -0.000252135 Jy ! Component: 2950 - total flux cleaned = -0.000340825 Jy ! Component: 3000 - total flux cleaned = -0.00031895 Jy ! Component: 3050 - total flux cleaned = -0.00020986 Jy ! Component: 3100 - total flux cleaned = -0.000317728 Jy ! Component: 3150 - total flux cleaned = -0.000296112 Jy ! Component: 3200 - total flux cleaned = -0.000232524 Jy ! Component: 3250 - total flux cleaned = -0.000253528 Jy ! Component: 3300 - total flux cleaned = -0.00025365 Jy ! Component: 3350 - total flux cleaned = -0.000253721 Jy ! Component: 3400 - total flux cleaned = -0.000171635 Jy ! Component: 3450 - total flux cleaned = -0.000232634 Jy ! Component: 3500 - total flux cleaned = -0.000252887 Jy ! Component: 3550 - total flux cleaned = -0.000212872 Jy ! Component: 3600 - total flux cleaned = -0.000173089 Jy ! Component: 3650 - total flux cleaned = -0.000232193 Jy ! Component: 3700 - total flux cleaned = -9.52242e-05 Jy ! Component: 3750 - total flux cleaned = -5.65023e-05 Jy ! Component: 3800 - total flux cleaned = 2.0387e-05 Jy ! Component: 3850 - total flux cleaned = -9.43178e-05 Jy ! Component: 3900 - total flux cleaned = 5.60015e-07 Jy ! Component: 3950 - total flux cleaned = -3.70478e-05 Jy ! Component: 4000 - total flux cleaned = -3.68866e-05 Jy ! Component: 4050 - total flux cleaned = 5.02456e-07 Jy ! Total flux subtracted in 4096 components = 5.54516e-05 Jy ! Clean residual min=-0.001084 max=0.001071 Jy/beam ! Clean residual mean=0.000001 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 1.4765 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 391 components and 1.4765 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2129-1538_X_n_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7223 x 1.724 at -6.071 degrees (North through East) ! Clean map min=-0.0049963 max=1.0581 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2129-1538_X_n_map.fits wmodel /image_prod/ug002_uva//J2129-1538_X_n_map.mod ! Writing 391 model components to file: /image_prod/ug002_uva//J2129-1538_X_n_map.mod wobs /image_prod/ug002_uva//J2129-1538_X_n_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2129-1538_X_n_uvs.fits wwins /image_prod/ug002_uva//J2129-1538_X_n_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J2129-1538_X_n_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.05806 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000311148 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0882222 0.0882222 0.176444 0.352889 0.705778 1.41156 2.82311 5.64622 11.2924 22.5849 45.1698 90.3396 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.058 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3400.5 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2129-1538_X_n_dfm.log closed on Thu Mar 5 05:16:52 2020