! Started logfile: /image_prod/ug002_uva//J2129-1538_X_l_dfm.log on Thu Mar 5 05:16:38 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2129-1538_X_l_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2129-1538_X_l_uva.fits ! AN table 1: 12 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.872024 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 3516 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2129-1538_X_l] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.638994Jy sigma=7.820466 ! Fit after self-cal, rms=0.506676Jy sigma=2.749551 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.584 mas, bmaj=1.459 mas, bpa=-5.321 degrees ! Estimated noise=3.07782 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.824564 Jy ! Component: 100 - total flux cleaned = 1.16568 Jy ! Total flux subtracted in 100 components = 1.16568 Jy ! Clean residual min=-0.065225 max=0.155276 Jy/beam ! Clean residual mean=0.000017 rms=0.015926 Jy/beam ! Combined flux in latest and established models = 1.16568 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.16568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.348718Jy sigma=1.535479 ! Fit after self-cal, rms=0.348059Jy sigma=1.532828 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.17361 Jy ! Component: 100 - total flux cleaned = 0.272855 Jy ! Total flux subtracted in 100 components = 0.272855 Jy ! Clean residual min=-0.041837 max=0.051115 Jy/beam ! Clean residual mean=-0.000006 rms=0.008859 Jy/beam ! Combined flux in latest and established models = 1.43853 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 1.43853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.203025Jy sigma=0.887317 ! Fit after self-cal, rms=0.202767Jy sigma=0.886158 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0578243 Jy ! Component: 100 - total flux cleaned = 0.0909565 Jy ! Total flux subtracted in 100 components = 0.0909565 Jy ! Clean residual min=-0.040105 max=0.049021 Jy/beam ! Clean residual mean=-0.000013 rms=0.007649 Jy/beam ! Combined flux in latest and established models = 1.52949 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 14 components and 1.52949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.180465Jy sigma=0.789902 ! Fit after self-cal, rms=0.180343Jy sigma=0.789371 ! Inverting map ! Added new window around map position (-10.2, -5.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444917 Jy ! Component: 100 - total flux cleaned = 0.0694452 Jy ! Total flux subtracted in 100 components = 0.0694452 Jy ! Clean residual min=-0.037913 max=0.041114 Jy/beam ! Clean residual mean=-0.000021 rms=0.006839 Jy/beam ! Combined flux in latest and established models = 1.59893 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 1.59893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168005Jy sigma=0.736185 ! Fit after self-cal, rms=0.167284Jy sigma=0.731965 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6908 mas, bmaj=1.592 mas, bpa=-5.375 degrees ! Estimated noise=2.4806 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158893 Jy ! Component: 100 - total flux cleaned = 0.0250193 Jy ! Component: 150 - total flux cleaned = 0.0312617 Jy ! Component: 200 - total flux cleaned = 0.0338601 Jy ! Total flux subtracted in 200 components = 0.0338601 Jy ! Clean residual min=-0.043659 max=0.042221 Jy/beam ! Clean residual mean=-0.000044 rms=0.008849 Jy/beam ! Combined flux in latest and established models = 1.63279 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 1.6328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.162474Jy sigma=0.711968 ! Fit after self-cal, rms=0.162346Jy sigma=0.711218 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6908 x 1.592 at -5.375 degrees (North through East) ! Clean map min=-0.041739 max=1.0781 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 1.05 LA 1.02 MK 1.02 ! NL 1.05 OV 0.92 PT 0.91 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 1.02 LA 1.00 MK 1.00 ! NL 1.08 OV 0.92 PT 0.94 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 1.06 LA 1.04 MK 1.01 ! NL 1.07 OV 0.92 PT 0.93 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 1.03 LA 1.03 MK 1.02 ! NL 1.06 OV 0.93 PT 0.92 SC 0.98 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 1.07 LA 1.02 MK 0.99 ! NL 1.06 OV 0.91 PT 0.95 SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 1.02 LA 1.02 MK 1.03 ! NL 1.08 OV 0.92 PT 0.95 SC 1.00 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.09 LA 1.02 MK 1.04 ! NL 1.07 OV 0.93 PT 0.93 SC 1.02 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 1.07 LA 1.03 MK 1.04 ! NL 1.09 OV 0.92 PT 0.94 SC 1.04 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.06 LA 1.02 MK 1.05 ! NL 1.07 OV 0.90 PT 0.93 SC 1.04 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 1.03 LA 1.03 MK 1.03 ! NL 1.11 OV 0.92 PT 0.94 SC 1.02 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 1.05 LA 1.03 MK 1.02 ! NL 1.10 OV 0.92 PT 0.95 SC 1.04 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 1.06 LA 1.03 MK 1.04 ! NL 1.09 OV 0.91 PT 0.94 SC 1.05 ! ! ! Fit before self-cal, rms=0.162346Jy sigma=0.711218 ! Fit after self-cal, rms=0.133748Jy sigma=0.571726 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7055 mas, bmaj=1.602 mas, bpa=-4.683 degrees ! Estimated noise=2.52048 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0176687 Jy ! Component: 100 - total flux cleaned = -0.0279332 Jy ! Component: 150 - total flux cleaned = -0.0316833 Jy ! Component: 200 - total flux cleaned = -0.0324835 Jy ! Total flux subtracted in 200 components = -0.0324835 Jy ! Clean residual min=-0.025250 max=0.026004 Jy/beam ! Clean residual mean=-0.000017 rms=0.006015 Jy/beam ! Combined flux in latest and established models = 1.60031 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 1.60031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130437Jy sigma=0.558715 ! Fit after self-cal, rms=0.130161Jy sigma=0.557890 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130161Jy sigma=0.557890 ! Fit after self-cal, rms=0.083750Jy sigma=0.375226 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7048 mas, bmaj=1.6 mas, bpa=-4.734 degrees ! Estimated noise=2.51534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0173339 Jy ! Component: 100 - total flux cleaned = -0.0224117 Jy ! Component: 150 - total flux cleaned = -0.0241172 Jy ! Component: 200 - total flux cleaned = -0.0249058 Jy ! Total flux subtracted in 200 components = -0.0249058 Jy ! Clean residual min=-0.011096 max=0.009304 Jy/beam ! Clean residual mean=-0.000001 rms=0.001979 Jy/beam ! Combined flux in latest and established models = 1.57541 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 1.57541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079301Jy sigma=0.358044 ! Fit after self-cal, rms=0.078843Jy sigma=0.356026 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00321507 Jy ! Component: 100 - total flux cleaned = -0.00321477 Jy ! Component: 150 - total flux cleaned = -0.00335426 Jy ! Component: 200 - total flux cleaned = -0.00349482 Jy ! Total flux subtracted in 200 components = -0.00349482 Jy ! Clean residual min=-0.010443 max=0.007835 Jy/beam ! Clean residual mean=0.000001 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 1.57191 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 1.57191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078123Jy sigma=0.352532 ! Fit after self-cal, rms=0.078066Jy sigma=0.352314 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078066Jy sigma=0.352314 ! Fit after self-cal, rms=0.076986Jy sigma=0.347834 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7045 mas, bmaj=1.598 mas, bpa=-4.763 degrees ! Estimated noise=2.51122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00712057 Jy ! Component: 100 - total flux cleaned = -0.00841397 Jy ! Component: 150 - total flux cleaned = -0.00828517 Jy ! Component: 200 - total flux cleaned = -0.00828712 Jy ! Total flux subtracted in 200 components = -0.00828712 Jy ! Clean residual min=-0.008694 max=0.006990 Jy/beam ! Clean residual mean=0.000004 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 1.56362 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 1.56362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076128Jy sigma=0.344030 ! Fit after self-cal, rms=0.076067Jy sigma=0.343678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121327 Jy ! Component: 100 - total flux cleaned = -0.0009921 Jy ! Component: 150 - total flux cleaned = -0.000684237 Jy ! Component: 200 - total flux cleaned = -0.000490543 Jy ! Total flux subtracted in 200 components = -0.000490543 Jy ! Clean residual min=-0.008352 max=0.006614 Jy/beam ! Clean residual mean=0.000005 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 1.56313 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 1.56313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075813Jy sigma=0.342043 ! Fit after self-cal, rms=0.075804Jy sigma=0.341976 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075804Jy sigma=0.341976 ! Fit after self-cal, rms=0.075678Jy sigma=0.341228 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.819 mas, bmaj=3.553 mas, bpa=5.363 degrees ! Estimated noise=4.18951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117333 Jy ! Component: 100 - total flux cleaned = -0.000920161 Jy ! Component: 150 - total flux cleaned = -0.000915163 Jy ! Component: 200 - total flux cleaned = -0.000916067 Jy ! Total flux subtracted in 200 components = -0.000916067 Jy ! Clean residual min=-0.009977 max=0.008428 Jy/beam ! Clean residual mean=0.000019 rms=0.002227 Jy/beam ! Combined flux in latest and established models = 1.56222 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 59 components and 1.56222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075587Jy sigma=0.341285 ! Fit after self-cal, rms=0.075586Jy sigma=0.341129 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156049 Jy ! Component: 100 - total flux cleaned = -0.000216768 Jy ! Component: 150 - total flux cleaned = -0.000273574 Jy ! Component: 200 - total flux cleaned = -0.00032212 Jy ! Total flux subtracted in 200 components = -0.00032212 Jy ! Clean residual min=-0.009649 max=0.008350 Jy/beam ! Clean residual mean=0.000019 rms=0.002203 Jy/beam ! Combined flux in latest and established models = 1.5619 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 1.5619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075552Jy sigma=0.341500 ! Fit after self-cal, rms=0.075544Jy sigma=0.341364 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7044 mas, bmaj=1.598 mas, bpa=-4.779 degrees ! Estimated noise=2.50979 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7044 x 1.598 at -4.779 degrees (North through East) ! Clean map min=-0.0062148 max=1.0924 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075544Jy sigma=0.341364 ! Fit after self-cal, rms=0.070735Jy sigma=0.316713 ! Inverting map and beam ! Estimated beam: bmin=0.7041 mas, bmaj=1.598 mas, bpa=-4.832 degrees ! Estimated noise=2.50974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116253 Jy ! Component: 100 - total flux cleaned = -0.00104464 Jy ! Component: 150 - total flux cleaned = -0.00114544 Jy ! Component: 200 - total flux cleaned = -0.00105157 Jy ! Total flux subtracted in 200 components = -0.00105157 Jy ! Clean residual min=-0.007116 max=0.006345 Jy/beam ! Clean residual mean=0.000007 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 1.56084 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 1.56084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070410Jy sigma=0.314478 ! Fit after self-cal, rms=0.070404Jy sigma=0.314386 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000315902 Jy ! Component: 100 - total flux cleaned = -0.000230014 Jy ! Component: 150 - total flux cleaned = -0.000151219 Jy ! Component: 200 - total flux cleaned = -7.73565e-05 Jy ! Total flux subtracted in 200 components = -7.73565e-05 Jy ! Clean residual min=-0.006869 max=0.006019 Jy/beam ! Clean residual mean=0.000007 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 1.56077 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 1.56077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070252Jy sigma=0.313246 ! Fit after self-cal, rms=0.070258Jy sigma=0.313204 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070258Jy sigma=0.313204 ! Fit after self-cal, rms=0.070190Jy sigma=0.313033 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5889 mas, bmaj=1.455 mas, bpa=-4.989 degrees ! Estimated noise=3.12367 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.826273 Jy ! Component: 100 - total flux cleaned = 1.16269 Jy ! Component: 150 - total flux cleaned = 1.3329 Jy ! Component: 200 - total flux cleaned = 1.42995 Jy ! Total flux subtracted in 200 components = 1.42995 Jy ! Clean residual min=-0.028038 max=0.048224 Jy/beam ! Clean residual mean=0.000013 rms=0.005126 Jy/beam ! Combined flux in latest and established models = 1.42996 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.42996 Jy ! Inverting map and beam ! Estimated beam: bmin=0.704 mas, bmaj=1.597 mas, bpa=-4.825 degrees ! Estimated noise=2.50867 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0672402 Jy ! Component: 100 - total flux cleaned = 0.0996682 Jy ! Component: 150 - total flux cleaned = 0.11671 Jy ! Component: 200 - total flux cleaned = 0.121524 Jy ! Total flux subtracted in 200 components = 0.121524 Jy ! Clean residual min=-0.007700 max=0.010395 Jy/beam ! Clean residual mean=0.000008 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 1.55148 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 1.55148 Jy ! Inverting map ! Added new window around map position (-0.6, -10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724217 Jy ! Component: 100 - total flux cleaned = 0.010144 Jy ! Component: 150 - total flux cleaned = 0.0128774 Jy ! Component: 200 - total flux cleaned = 0.0150311 Jy ! Total flux subtracted in 200 components = 0.0150311 Jy ! Clean residual min=-0.005921 max=0.007428 Jy/beam ! Clean residual mean=0.000006 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 1.56651 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 35 components and 1.56651 Jy ! Inverting map ! Added new window around map position (-2.6, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357072 Jy ! Component: 100 - total flux cleaned = 0.0052863 Jy ! Component: 150 - total flux cleaned = 0.00630431 Jy ! Component: 200 - total flux cleaned = 0.00723969 Jy ! Total flux subtracted in 200 components = 0.00723969 Jy ! Clean residual min=-0.005342 max=0.005763 Jy/beam ! Clean residual mean=0.000003 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 1.57375 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 49 components and 1.57375 Jy ! Inverting map ! Added new window around map position (-0.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257698 Jy ! Component: 100 - total flux cleaned = 0.00254426 Jy ! Component: 150 - total flux cleaned = 0.00267823 Jy ! Component: 200 - total flux cleaned = 0.00254487 Jy ! Total flux subtracted in 200 components = 0.00254487 Jy ! Clean residual min=-0.005470 max=0.005251 Jy/beam ! Clean residual mean=0.000002 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 1.5763 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 1.5763 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.819 mas, bmaj=3.552 mas, bpa=5.327 degrees ! Estimated noise=4.19124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00310643 Jy ! Component: 100 - total flux cleaned = -0.00404581 Jy ! Component: 150 - total flux cleaned = -0.0044341 Jy ! Component: 200 - total flux cleaned = -0.00461074 Jy ! Total flux subtracted in 200 components = -0.00461074 Jy ! Clean residual min=-0.005792 max=0.005682 Jy/beam ! Clean residual mean=0.000010 rms=0.001610 Jy/beam ! Combined flux in latest and established models = 1.57168 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109147 Jy ! Component: 100 - total flux cleaned = -0.000106348 Jy ! Component: 150 - total flux cleaned = -0.000203858 Jy ! Component: 200 - total flux cleaned = -0.00034297 Jy ! Total flux subtracted in 200 components = -0.00034297 Jy ! Clean residual min=-0.005735 max=0.005526 Jy/beam ! Clean residual mean=0.000010 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 1.57134 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 82 components and 1.57134 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.704 mas, bmaj=1.597 mas, bpa=-4.825 degrees ! Estimated noise=2.50867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132129 Jy ! Component: 100 - total flux cleaned = 0.00167048 Jy ! Component: 150 - total flux cleaned = 0.00166688 Jy ! Component: 200 - total flux cleaned = 0.00166651 Jy ! Total flux subtracted in 200 components = 0.00166651 Jy ! Clean residual min=-0.004779 max=0.004800 Jy/beam ! Clean residual mean=0.000002 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 1.57301 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 1.57301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068946Jy sigma=0.305767 ! Fit after self-cal, rms=0.068879Jy sigma=0.305269 wmodel J2129-1538_X_l_map.mod ! Writing 92 model components to file: J2129-1538_X_l_map.mod wobs J2129-1538_X_l_uvs.fits ! Writing UV FITS file: J2129-1538_X_l_uvs.fits wwins J2129-1538_X_l_map.win ! wwins: Wrote 5 windows to J2129-1538_X_l_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.91258e-05 Jy ! Component: 100 - total flux cleaned = -0.000247782 Jy ! Component: 150 - total flux cleaned = -0.0003219 Jy ! Component: 200 - total flux cleaned = -0.000322795 Jy ! Component: 250 - total flux cleaned = -0.000656552 Jy ! Component: 300 - total flux cleaned = -0.000913142 Jy ! Component: 350 - total flux cleaned = -0.0010365 Jy ! Component: 400 - total flux cleaned = -0.00103618 Jy ! Component: 450 - total flux cleaned = -0.000918835 Jy ! Component: 500 - total flux cleaned = -0.000862975 Jy ! Component: 550 - total flux cleaned = -0.00080919 Jy ! Component: 600 - total flux cleaned = -0.000810349 Jy ! Component: 650 - total flux cleaned = -0.000758309 Jy ! Component: 700 - total flux cleaned = -0.000605936 Jy ! Component: 750 - total flux cleaned = -0.00060584 Jy ! Component: 800 - total flux cleaned = -0.00050737 Jy ! Component: 850 - total flux cleaned = -0.000364737 Jy ! Component: 900 - total flux cleaned = -0.000133935 Jy ! Component: 950 - total flux cleaned = -0.000180102 Jy ! Component: 1000 - total flux cleaned = -0.000180453 Jy ! Component: 1050 - total flux cleaned = -9.34228e-05 Jy ! Component: 1100 - total flux cleaned = -9.35688e-05 Jy ! Component: 1150 - total flux cleaned = -0.000219286 Jy ! Component: 1200 - total flux cleaned = -0.000133853 Jy ! Component: 1250 - total flux cleaned = -5.16185e-05 Jy ! Component: 1300 - total flux cleaned = 6.88321e-05 Jy ! Component: 1350 - total flux cleaned = 2.98203e-05 Jy ! Component: 1400 - total flux cleaned = 0.000107934 Jy ! Component: 1450 - total flux cleaned = 0.00033827 Jy ! Component: 1500 - total flux cleaned = 0.000338698 Jy ! Component: 1550 - total flux cleaned = 0.000450787 Jy ! Component: 1600 - total flux cleaned = 0.00041445 Jy ! Component: 1650 - total flux cleaned = 0.00045089 Jy ! Component: 1700 - total flux cleaned = 0.000630058 Jy ! Component: 1750 - total flux cleaned = 0.000524089 Jy ! Component: 1800 - total flux cleaned = 0.000594172 Jy ! Component: 1850 - total flux cleaned = 0.000594621 Jy ! Component: 1900 - total flux cleaned = 0.000526261 Jy ! Component: 1950 - total flux cleaned = 0.000526289 Jy ! Component: 2000 - total flux cleaned = 0.000393585 Jy ! Component: 2050 - total flux cleaned = 0.000426617 Jy ! Component: 2100 - total flux cleaned = 0.000426576 Jy ! Component: 2150 - total flux cleaned = 0.00036262 Jy ! Component: 2200 - total flux cleaned = 0.000299187 Jy ! Component: 2250 - total flux cleaned = 0.00029903 Jy ! Component: 2300 - total flux cleaned = 0.00026841 Jy ! Component: 2350 - total flux cleaned = 0.000237698 Jy ! Component: 2400 - total flux cleaned = 0.000146957 Jy ! Component: 2450 - total flux cleaned = 5.72585e-05 Jy ! Component: 2500 - total flux cleaned = 0.000146336 Jy ! Component: 2550 - total flux cleaned = 0.000175618 Jy ! Component: 2600 - total flux cleaned = 0.000175014 Jy ! Component: 2650 - total flux cleaned = 0.000203709 Jy ! Component: 2700 - total flux cleaned = 0.000147205 Jy ! Component: 2750 - total flux cleaned = 0.000118973 Jy ! Component: 2800 - total flux cleaned = 9.10943e-05 Jy ! Component: 2850 - total flux cleaned = 0.000201051 Jy ! Component: 2900 - total flux cleaned = 0.000147201 Jy ! Component: 2950 - total flux cleaned = 0.000281981 Jy ! Component: 3000 - total flux cleaned = 0.000362283 Jy ! Component: 3050 - total flux cleaned = 0.000468017 Jy ! Component: 3100 - total flux cleaned = 0.000520647 Jy ! Component: 3150 - total flux cleaned = 0.000494624 Jy ! Component: 3200 - total flux cleaned = 0.000546383 Jy ! Component: 3250 - total flux cleaned = 0.000572294 Jy ! Component: 3300 - total flux cleaned = 0.000622588 Jy ! Component: 3350 - total flux cleaned = 0.000747802 Jy ! Component: 3400 - total flux cleaned = 0.000797247 Jy ! Component: 3450 - total flux cleaned = 0.000920367 Jy ! Component: 3500 - total flux cleaned = 0.00101754 Jy ! Component: 3550 - total flux cleaned = 0.00108971 Jy ! Component: 3600 - total flux cleaned = 0.00118531 Jy ! Component: 3650 - total flux cleaned = 0.00118554 Jy ! Component: 3700 - total flux cleaned = 0.00127992 Jy ! Component: 3750 - total flux cleaned = 0.0013732 Jy ! Component: 3800 - total flux cleaned = 0.00132684 Jy ! Component: 3850 - total flux cleaned = 0.00144199 Jy ! Component: 3900 - total flux cleaned = 0.00148754 Jy ! Component: 3950 - total flux cleaned = 0.00153295 Jy ! Component: 4000 - total flux cleaned = 0.00148786 Jy ! Component: 4050 - total flux cleaned = 0.00148776 Jy ! Total flux subtracted in 4096 components = 0.00151009 Jy ! Clean residual min=-0.001296 max=0.001299 Jy/beam ! Clean residual mean=0.000000 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 1.57452 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 387 components and 1.57452 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2129-1538_X_l_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.704 x 1.597 at -4.825 degrees (North through East) ! Clean map min=-0.0027417 max=1.0926 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2129-1538_X_l_map.fits wmodel /image_prod/ug002_uva//J2129-1538_X_l_map.mod ! Writing 387 model components to file: /image_prod/ug002_uva//J2129-1538_X_l_map.mod wobs /image_prod/ug002_uva//J2129-1538_X_l_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2129-1538_X_l_uvs.fits wwins /image_prod/ug002_uva//J2129-1538_X_l_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uva//J2129-1538_X_l_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.09258 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00036468 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.100133 0.100133 0.200267 0.400533 0.801067 1.60213 3.20427 6.40854 12.8171 25.6341 51.2683 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.092 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2996 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2129-1538_X_l_dfm.log closed on Thu Mar 5 05:16:42 2020