! Started logfile: /image_prod/ug002_uva//J2129-1538_X_h_dfm.log on Thu Mar 5 05:16:17 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2129-1538_X_h_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2129-1538_X_h_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.885417 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 3060 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2129-1538_X_h] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.691050Jy sigma=12.389533 ! Fit after self-cal, rms=0.550480Jy sigma=4.281817 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5678 mas, bmaj=1.685 mas, bpa=-8.628 degrees ! Estimated noise=2.33998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.840783 Jy ! Component: 100 - total flux cleaned = 1.20272 Jy ! Total flux subtracted in 100 components = 1.20272 Jy ! Clean residual min=-0.062724 max=0.163115 Jy/beam ! Clean residual mean=0.000049 rms=0.019100 Jy/beam ! Combined flux in latest and established models = 1.20272 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.20272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.354995Jy sigma=2.343579 ! Fit after self-cal, rms=0.354649Jy sigma=2.341848 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178414 Jy ! Component: 100 - total flux cleaned = 0.275688 Jy ! Total flux subtracted in 100 components = 0.275688 Jy ! Clean residual min=-0.039361 max=0.049156 Jy/beam ! Clean residual mean=0.000030 rms=0.008464 Jy/beam ! Combined flux in latest and established models = 1.47841 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 1.47841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.172137Jy sigma=1.129829 ! Fit after self-cal, rms=0.171990Jy sigma=1.128839 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0597685 Jy ! Component: 100 - total flux cleaned = 0.0988615 Jy ! Total flux subtracted in 100 components = 0.0988615 Jy ! Clean residual min=-0.033690 max=0.028546 Jy/beam ! Clean residual mean=0.000024 rms=0.006063 Jy/beam ! Combined flux in latest and established models = 1.57727 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 1.57727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128648Jy sigma=0.864075 ! Fit after self-cal, rms=0.128576Jy sigma=0.863539 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6903 mas, bmaj=1.86 mas, bpa=-8.162 degrees ! Estimated noise=1.7448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0378173 Jy ! Component: 100 - total flux cleaned = 0.0592133 Jy ! Component: 150 - total flux cleaned = 0.0718342 Jy ! Component: 200 - total flux cleaned = 0.0793619 Jy ! Total flux subtracted in 200 components = 0.0793619 Jy ! Clean residual min=-0.039054 max=0.032898 Jy/beam ! Clean residual mean=0.000031 rms=0.007728 Jy/beam ! Combined flux in latest and established models = 1.65663 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 33 components and 1.65663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112535Jy sigma=0.787906 ! Fit after self-cal, rms=0.112500Jy sigma=0.787727 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6903 x 1.86 at -8.162 degrees (North through East) ! Clean map min=-0.036352 max=1.1373 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 HN 0.98 KP 1.07 ! LA 1.05 MK 0.99 OV 0.93 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.96 KP 1.07 ! LA 1.07 MK 0.98 OV 0.94 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.97 KP 1.07 ! LA 1.06 MK 1.03 OV 0.93 PT 0.94 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.98 KP 1.07 ! LA 1.04 MK 0.98 OV 0.92 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 0.98 KP 1.05 ! LA 1.03 MK 1.02 OV 0.93 PT 0.90 ! SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.07 HN 0.99 KP 1.06 ! LA 1.03 MK 0.97 OV 0.93 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 HN 0.97 KP 1.05 ! LA 1.05 MK 1.01 OV 0.93 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 HN 0.97 KP 1.05 ! LA 1.05 MK 1.00 OV 0.92 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.00 KP 1.05 ! LA 1.02 MK 0.98 OV 0.95 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 HN 0.99 KP 1.04 ! LA 1.06 MK 1.03 OV 0.94 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 1.00 KP 1.06 ! LA 1.05 MK 1.02 OV 0.93 PT 0.93 ! SC 1.01 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 1.00 KP 1.06 ! LA 1.05 MK 1.02 OV 0.92 PT 0.91 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.112500Jy sigma=0.787727 ! Fit after self-cal, rms=0.060716Jy sigma=0.469617 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6904 mas, bmaj=1.864 mas, bpa=-8.406 degrees ! Estimated noise=1.74203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375408 Jy ! Component: 100 - total flux cleaned = 1.81596e-06 Jy ! Component: 150 - total flux cleaned = 0.000130058 Jy ! Component: 200 - total flux cleaned = 0.00019009 Jy ! Total flux subtracted in 200 components = 0.00019009 Jy ! Clean residual min=-0.004701 max=0.004996 Jy/beam ! Clean residual mean=-0.000003 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 1.65682 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 1.65682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060565Jy sigma=0.468386 ! Fit after self-cal, rms=0.060569Jy sigma=0.468267 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060569Jy sigma=0.468267 ! Fit after self-cal, rms=0.060574Jy sigma=0.468224 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6903 mas, bmaj=1.865 mas, bpa=-8.42 degrees ! Estimated noise=1.74216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.93814e-05 Jy ! Component: 100 - total flux cleaned = 0.000286192 Jy ! Component: 150 - total flux cleaned = 0.000287262 Jy ! Component: 200 - total flux cleaned = 0.000243119 Jy ! Total flux subtracted in 200 components = 0.000243119 Jy ! Clean residual min=-0.004696 max=0.004847 Jy/beam ! Clean residual mean=-0.000003 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 1.65707 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 1.65707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060492Jy sigma=0.467657 ! Fit after self-cal, rms=0.060492Jy sigma=0.467632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.4, 29.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310525 Jy ! Component: 100 - total flux cleaned = 0.00312135 Jy ! Component: 150 - total flux cleaned = 0.00318009 Jy ! Component: 200 - total flux cleaned = 0.00323157 Jy ! Total flux subtracted in 200 components = 0.00323157 Jy ! Clean residual min=-0.004436 max=0.004771 Jy/beam ! Clean residual mean=-0.000002 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 1.6603 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 1.6603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060233Jy sigma=0.465242 ! Fit after self-cal, rms=0.060214Jy sigma=0.465186 ! Inverting map ! Added new window around map position (-13.8, -49.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034017 Jy ! Component: 100 - total flux cleaned = 0.00381504 Jy ! Component: 150 - total flux cleaned = 0.00386963 Jy ! Component: 200 - total flux cleaned = 0.00392179 Jy ! Total flux subtracted in 200 components = 0.00392179 Jy ! Clean residual min=-0.004189 max=0.003536 Jy/beam ! Clean residual mean=-0.000002 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 1.66422 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 1.66422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059966Jy sigma=0.463088 ! Fit after self-cal, rms=0.059952Jy sigma=0.463010 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059952Jy sigma=0.463010 ! Fit after self-cal, rms=0.059864Jy sigma=0.462786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6902 mas, bmaj=1.865 mas, bpa=-8.425 degrees ! Estimated noise=1.74108 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359969 Jy ! Component: 100 - total flux cleaned = 0.000357411 Jy ! Component: 150 - total flux cleaned = 0.000444801 Jy ! Component: 200 - total flux cleaned = 0.000405679 Jy ! Total flux subtracted in 200 components = 0.000405679 Jy ! Clean residual min=-0.003939 max=0.003314 Jy/beam ! Clean residual mean=-0.000004 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 1.66462 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 72 components and 1.66462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059795Jy sigma=0.462247 ! Fit after self-cal, rms=0.059793Jy sigma=0.462240 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201821 Jy ! Component: 100 - total flux cleaned = 0.000201416 Jy ! Component: 150 - total flux cleaned = 0.000128202 Jy ! Component: 200 - total flux cleaned = 0.00012877 Jy ! Total flux subtracted in 200 components = 0.00012877 Jy ! Clean residual min=-0.003864 max=0.003301 Jy/beam ! Clean residual mean=-0.000004 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 1.66475 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 1.66475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059752Jy sigma=0.461945 ! Fit after self-cal, rms=0.059753Jy sigma=0.461942 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059753Jy sigma=0.461942 ! Fit after self-cal, rms=0.059727Jy sigma=0.461910 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.276 mas, bmaj=3.722 mas, bpa=0.4198 degrees ! Estimated noise=2.95731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117778 Jy ! Component: 100 - total flux cleaned = 0.000191099 Jy ! Component: 150 - total flux cleaned = 0.000319848 Jy ! Component: 200 - total flux cleaned = 0.000437124 Jy ! Total flux subtracted in 200 components = 0.000437124 Jy ! Clean residual min=-0.003630 max=0.004816 Jy/beam ! Clean residual mean=-0.000013 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 1.66519 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 82 components and 1.66519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059704Jy sigma=0.461959 ! Fit after self-cal, rms=0.059707Jy sigma=0.461934 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000231211 Jy ! Component: 100 - total flux cleaned = 0.000349233 Jy ! Component: 150 - total flux cleaned = 0.000454811 Jy ! Component: 200 - total flux cleaned = 0.000552048 Jy ! Total flux subtracted in 200 components = 0.000552048 Jy ! Clean residual min=-0.003657 max=0.004880 Jy/beam ! Clean residual mean=-0.000013 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 1.66574 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 1.66574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059700Jy sigma=0.462054 ! Fit after self-cal, rms=0.059701Jy sigma=0.462027 ! Inverting map ! Added new window around map position (18.4, -42.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407164 Jy ! Component: 100 - total flux cleaned = 0.00493981 Jy ! Component: 150 - total flux cleaned = 0.00535066 Jy ! Component: 200 - total flux cleaned = 0.00570651 Jy ! Total flux subtracted in 200 components = 0.00570651 Jy ! Clean residual min=-0.002693 max=0.002536 Jy/beam ! Clean residual mean=-0.000009 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 1.67145 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 131 components and 1.67145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059511Jy sigma=0.461042 ! Fit after self-cal, rms=0.059508Jy sigma=0.460966 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.6901 mas, bmaj=1.865 mas, bpa=-8.433 degrees ! Estimated noise=1.7405 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6901 x 1.865 at -8.433 degrees (North through East) ! Clean map min=-0.0030412 max=1.1349 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059508Jy sigma=0.460966 ! Fit after self-cal, rms=0.056638Jy sigma=0.433422 ! Inverting map and beam ! Estimated beam: bmin=0.6899 mas, bmaj=1.865 mas, bpa=-8.468 degrees ! Estimated noise=1.73934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113228 Jy ! Component: 100 - total flux cleaned = -0.00105056 Jy ! Component: 150 - total flux cleaned = -0.00111907 Jy ! Component: 200 - total flux cleaned = -0.00101018 Jy ! Total flux subtracted in 200 components = -0.00101018 Jy ! Clean residual min=-0.002994 max=0.002819 Jy/beam ! Clean residual mean=-0.000004 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 1.67044 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 160 components and 1.67044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056482Jy sigma=0.431781 ! Fit after self-cal, rms=0.056479Jy sigma=0.431762 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000339574 Jy ! Component: 100 - total flux cleaned = -0.000286523 Jy ! Component: 150 - total flux cleaned = -0.000104472 Jy ! Component: 200 - total flux cleaned = 2.067e-05 Jy ! Total flux subtracted in 200 components = 2.067e-05 Jy ! Clean residual min=-0.002958 max=0.002693 Jy/beam ! Clean residual mean=-0.000003 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 1.67046 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 177 components and 1.67046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056414Jy sigma=0.431215 ! Fit after self-cal, rms=0.056415Jy sigma=0.431210 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056415Jy sigma=0.431210 ! Fit after self-cal, rms=0.056425Jy sigma=0.431157 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5682 mas, bmaj=1.686 mas, bpa=-8.776 degrees ! Estimated noise=2.24043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.836446 Jy ! Component: 100 - total flux cleaned = 1.19769 Jy ! Component: 150 - total flux cleaned = 1.37608 Jy ! Component: 200 - total flux cleaned = 1.47329 Jy ! Total flux subtracted in 200 components = 1.47329 Jy ! Clean residual min=-0.025687 max=0.048095 Jy/beam ! Clean residual mean=0.000010 rms=0.006828 Jy/beam ! Combined flux in latest and established models = 1.47329 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.47329 Jy ! Inverting map and beam ! Estimated beam: bmin=0.69 mas, bmaj=1.865 mas, bpa=-8.461 degrees ! Estimated noise=1.73989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0826681 Jy ! Component: 100 - total flux cleaned = 0.12662 Jy ! Component: 150 - total flux cleaned = 0.151171 Jy ! Component: 200 - total flux cleaned = 0.1652 Jy ! Total flux subtracted in 200 components = 0.1652 Jy ! Clean residual min=-0.005717 max=0.008822 Jy/beam ! Clean residual mean=-0.000008 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 1.63849 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 28 components and 1.63849 Jy ! Inverting map ! Added new window around map position (-0.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00937647 Jy ! Component: 100 - total flux cleaned = 0.0157853 Jy ! Component: 150 - total flux cleaned = 0.0207955 Jy ! Component: 200 - total flux cleaned = 0.0248247 Jy ! Total flux subtracted in 200 components = 0.0248247 Jy ! Clean residual min=-0.004276 max=0.003827 Jy/beam ! Clean residual mean=-0.000003 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 1.66332 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 1.66332 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.276 mas, bmaj=3.722 mas, bpa=0.3873 degrees ! Estimated noise=2.95722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442503 Jy ! Component: 100 - total flux cleaned = 0.00698027 Jy ! Component: 150 - total flux cleaned = 0.00810203 Jy ! Component: 200 - total flux cleaned = 0.00879631 Jy ! Total flux subtracted in 200 components = 0.00879631 Jy ! Clean residual min=-0.003301 max=0.002992 Jy/beam ! Clean residual mean=-0.000005 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 1.67211 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174819 Jy ! Component: 100 - total flux cleaned = 0.000229704 Jy ! Component: 150 - total flux cleaned = 0.000133794 Jy ! Component: 200 - total flux cleaned = 8.63976e-05 Jy ! Total flux subtracted in 200 components = 8.63976e-05 Jy ! Clean residual min=-0.002990 max=0.002740 Jy/beam ! Clean residual mean=-0.000004 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 1.6722 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 103 components and 1.6722 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.69 mas, bmaj=1.865 mas, bpa=-8.461 degrees ! Estimated noise=1.73989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000645459 Jy ! Component: 100 - total flux cleaned = 0.000351972 Jy ! Component: 150 - total flux cleaned = 0.000166905 Jy ! Component: 200 - total flux cleaned = -6.19004e-06 Jy ! Total flux subtracted in 200 components = -6.19004e-06 Jy ! Clean residual min=-0.003543 max=0.002939 Jy/beam ! Clean residual mean=-0.000003 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 1.67219 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 129 components and 1.67219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056810Jy sigma=0.434542 ! Fit after self-cal, rms=0.056809Jy sigma=0.434423 wmodel J2129-1538_X_h_map.mod ! Writing 129 model components to file: J2129-1538_X_h_map.mod wobs J2129-1538_X_h_uvs.fits ! Writing UV FITS file: J2129-1538_X_h_uvs.fits wwins J2129-1538_X_h_map.win ! wwins: Wrote 5 windows to J2129-1538_X_h_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011723 Jy ! Component: 100 - total flux cleaned = -0.00200308 Jy ! Component: 150 - total flux cleaned = -0.00252089 Jy ! Component: 200 - total flux cleaned = -0.00281479 Jy ! Component: 250 - total flux cleaned = -0.00314395 Jy ! Component: 300 - total flux cleaned = -0.00332464 Jy ! Component: 350 - total flux cleaned = -0.00354441 Jy ! Component: 400 - total flux cleaned = -0.00375859 Jy ! Component: 450 - total flux cleaned = -0.00400922 Jy ! Component: 500 - total flux cleaned = -0.00425347 Jy ! Component: 550 - total flux cleaned = -0.00433303 Jy ! Component: 600 - total flux cleaned = -0.00452867 Jy ! Component: 650 - total flux cleaned = -0.00464446 Jy ! Component: 700 - total flux cleaned = -0.00483274 Jy ! Component: 750 - total flux cleaned = -0.00505385 Jy ! Component: 800 - total flux cleaned = -0.00512618 Jy ! Component: 850 - total flux cleaned = -0.00519692 Jy ! Component: 900 - total flux cleaned = -0.00533705 Jy ! Component: 950 - total flux cleaned = -0.00547412 Jy ! Component: 1000 - total flux cleaned = -0.0054728 Jy ! Component: 1050 - total flux cleaned = -0.00547256 Jy ! Component: 1100 - total flux cleaned = -0.00560364 Jy ! Component: 1150 - total flux cleaned = -0.00550641 Jy ! Component: 1200 - total flux cleaned = -0.00563456 Jy ! Component: 1250 - total flux cleaned = -0.0055717 Jy ! Component: 1300 - total flux cleaned = -0.00560284 Jy ! Component: 1350 - total flux cleaned = -0.00563352 Jy ! Component: 1400 - total flux cleaned = -0.00551282 Jy ! Component: 1450 - total flux cleaned = -0.00557263 Jy ! Component: 1500 - total flux cleaned = -0.00551408 Jy ! Component: 1550 - total flux cleaned = -0.00551396 Jy ! Component: 1600 - total flux cleaned = -0.00545633 Jy ! Component: 1650 - total flux cleaned = -0.00548452 Jy ! Component: 1700 - total flux cleaned = -0.00540005 Jy ! Component: 1750 - total flux cleaned = -0.0054277 Jy ! Component: 1800 - total flux cleaned = -0.00540001 Jy ! Component: 1850 - total flux cleaned = -0.00537276 Jy ! Component: 1900 - total flux cleaned = -0.00529276 Jy ! Component: 1950 - total flux cleaned = -0.00531927 Jy ! Component: 2000 - total flux cleaned = -0.00529333 Jy ! Component: 2050 - total flux cleaned = -0.00526743 Jy ! Component: 2100 - total flux cleaned = -0.00521648 Jy ! Component: 2150 - total flux cleaned = -0.00524197 Jy ! Component: 2200 - total flux cleaned = -0.00509149 Jy ! Component: 2250 - total flux cleaned = -0.00504181 Jy ! Component: 2300 - total flux cleaned = -0.00499279 Jy ! Component: 2350 - total flux cleaned = -0.00491996 Jy ! Component: 2400 - total flux cleaned = -0.00491981 Jy ! Component: 2450 - total flux cleaned = -0.00479983 Jy ! Component: 2500 - total flux cleaned = -0.00470502 Jy ! Component: 2550 - total flux cleaned = -0.00461132 Jy ! Component: 2600 - total flux cleaned = -0.00456482 Jy ! Component: 2650 - total flux cleaned = -0.00444977 Jy ! Component: 2700 - total flux cleaned = -0.00438158 Jy ! Component: 2750 - total flux cleaned = -0.00424625 Jy ! Component: 2800 - total flux cleaned = -0.00422425 Jy ! Component: 2850 - total flux cleaned = -0.00415779 Jy ! Component: 2900 - total flux cleaned = -0.00411404 Jy ! Component: 2950 - total flux cleaned = -0.00407052 Jy ! Component: 3000 - total flux cleaned = -0.00407076 Jy ! Component: 3050 - total flux cleaned = -0.00404919 Jy ! Component: 3100 - total flux cleaned = -0.00398514 Jy ! Component: 3150 - total flux cleaned = -0.0039428 Jy ! Component: 3200 - total flux cleaned = -0.00383803 Jy ! Component: 3250 - total flux cleaned = -0.00377564 Jy ! Component: 3300 - total flux cleaned = -0.00369315 Jy ! Component: 3350 - total flux cleaned = -0.00361123 Jy ! Component: 3400 - total flux cleaned = -0.00361138 Jy ! Component: 3450 - total flux cleaned = -0.00353066 Jy ! Component: 3500 - total flux cleaned = -0.0035505 Jy ! Component: 3550 - total flux cleaned = -0.00349045 Jy ! Component: 3600 - total flux cleaned = -0.00333213 Jy ! Component: 3650 - total flux cleaned = -0.0032732 Jy ! Component: 3700 - total flux cleaned = -0.00327331 Jy ! Component: 3750 - total flux cleaned = -0.00319567 Jy ! Component: 3800 - total flux cleaned = -0.00313764 Jy ! Component: 3850 - total flux cleaned = -0.00300369 Jy ! Component: 3900 - total flux cleaned = -0.00292775 Jy ! Component: 3950 - total flux cleaned = -0.00279557 Jy ! Component: 4000 - total flux cleaned = -0.00275804 Jy ! Component: 4050 - total flux cleaned = -0.00272058 Jy ! Total flux subtracted in 4096 components = -0.00259065 Jy ! Clean residual min=-0.001077 max=0.001203 Jy/beam ! Clean residual mean=-0.000000 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 1.6696 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 387 components and 1.6696 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2129-1538_X_h_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.69 x 1.865 at -8.461 degrees (North through East) ! Clean map min=-0.0024727 max=1.132 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2129-1538_X_h_map.fits wmodel /image_prod/ug002_uva//J2129-1538_X_h_map.mod ! Writing 387 model components to file: /image_prod/ug002_uva//J2129-1538_X_h_map.mod wobs /image_prod/ug002_uva//J2129-1538_X_h_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2129-1538_X_h_uvs.fits wwins /image_prod/ug002_uva//J2129-1538_X_h_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uva//J2129-1538_X_h_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.13199 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000302595 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0801938 0.0801938 0.160388 0.320775 0.641551 1.2831 2.5662 5.13241 10.2648 20.5296 41.0592 82.1185 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.131 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3740.94 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2129-1538_X_h_dfm.log closed on Thu Mar 5 05:16:22 2020