! Started logfile: /image_prod/ug002_uva//J2129-1538_X_d_dfm.log on Thu Mar 5 05:15:58 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2129-1538_X_d_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2129-1538_X_d_uva.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.627451 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5760 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2129-1538_X_d] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.695144Jy sigma=7.710670 ! Fit after self-cal, rms=0.559123Jy sigma=2.725378 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5875 mas, bmaj=1.557 mas, bpa=-6.833 degrees ! Estimated noise=2.5239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.865295 Jy ! Component: 100 - total flux cleaned = 1.2212 Jy ! Total flux subtracted in 100 components = 1.2212 Jy ! Clean residual min=-0.050804 max=0.157121 Jy/beam ! Clean residual mean=-0.000149 rms=0.013188 Jy/beam ! Combined flux in latest and established models = 1.2212 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.2212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.371150Jy sigma=1.574524 ! Fit after self-cal, rms=0.370760Jy sigma=1.573204 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175876 Jy ! Component: 100 - total flux cleaned = 0.274508 Jy ! Total flux subtracted in 100 components = 0.274508 Jy ! Clean residual min=-0.036154 max=0.050890 Jy/beam ! Clean residual mean=-0.000074 rms=0.007690 Jy/beam ! Combined flux in latest and established models = 1.49571 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 14 components and 1.49571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.216378Jy sigma=0.933131 ! Fit after self-cal, rms=0.216042Jy sigma=0.931749 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0567937 Jy ! Component: 100 - total flux cleaned = 0.0889635 Jy ! Total flux subtracted in 100 components = 0.0889635 Jy ! Clean residual min=-0.037177 max=0.042590 Jy/beam ! Clean residual mean=-0.000050 rms=0.006834 Jy/beam ! Combined flux in latest and established models = 1.58467 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 15 components and 1.58467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.190276Jy sigma=0.838405 ! Fit after self-cal, rms=0.190136Jy sigma=0.837930 ! Inverting map ! Added new window around map position (-1.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0400099 Jy ! Component: 100 - total flux cleaned = 0.0631604 Jy ! Total flux subtracted in 100 components = 0.0631604 Jy ! Clean residual min=-0.036545 max=0.036481 Jy/beam ! Clean residual mean=-0.000038 rms=0.006299 Jy/beam ! Combined flux in latest and established models = 1.64783 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 1.64783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.178524Jy sigma=0.792785 ! Fit after self-cal, rms=0.176949Jy sigma=0.785436 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7125 mas, bmaj=1.785 mas, bpa=-5.968 degrees ! Estimated noise=1.98344 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248627 Jy ! Component: 100 - total flux cleaned = 0.0412492 Jy ! Component: 150 - total flux cleaned = 0.0525683 Jy ! Component: 200 - total flux cleaned = 0.0581992 Jy ! Total flux subtracted in 200 components = 0.0581992 Jy ! Clean residual min=-0.034543 max=0.041757 Jy/beam ! Clean residual mean=-0.000061 rms=0.008358 Jy/beam ! Combined flux in latest and established models = 1.70603 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 1.70603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.171378Jy sigma=0.768271 ! Fit after self-cal, rms=0.171071Jy sigma=0.766591 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7125 x 1.785 at -5.968 degrees (North through East) ! Clean map min=-0.031705 max=1.1483 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00 HN 1.01 KP 1.06 ! LA 0.99 MK 1.00 NL 1.10 OV 0.91 ! PT 0.89 SC 0.97 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00 HN 0.99 KP 1.05 ! LA 1.00 MK 0.99 NL 1.11 OV 0.91 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.98 HN 1.01 KP 1.06 ! LA 1.00 MK 1.00 NL 1.11 OV 0.91 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.99 HN 0.99 KP 1.04 ! LA 1.02 MK 0.99 NL 1.11 OV 0.90 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 1.03 KP 1.06 ! LA 1.01 MK 0.99 NL 1.09 OV 0.89 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 0.98 KP 1.06 ! LA 1.03 MK 1.02 NL 1.11 OV 0.90 ! PT 0.89 SC 0.96 ! ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.99 HN 1.02 KP 1.06 ! LA 1.00 MK 1.00 NL 1.10 OV 0.91 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 1.00 KP 1.06 ! LA 1.01 MK 1.02 NL 1.10 OV 0.90 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 9. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 1.01 KP 1.04 ! LA 0.99 MK 1.01 NL 1.11 OV 0.89 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 10. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.01 HN 1.02 KP 1.04 ! LA 1.01 MK 1.02 NL 1.10 OV 0.91 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 11. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.98 HN 1.01 KP 1.05 ! LA 1.02 MK 0.97 NL 1.10 OV 0.91 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 12. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 1.01 KP 1.07 ! LA 1.02 MK 1.02 NL 1.11 OV 0.91 ! PT 0.89 SC 1.01 ! ! ! Fit before self-cal, rms=0.171071Jy sigma=0.766591 ! Fit after self-cal, rms=0.122354Jy sigma=0.507227 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7111 mas, bmaj=1.871 mas, bpa=-7.036 degrees ! Estimated noise=2.02437 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00941959 Jy ! Component: 100 - total flux cleaned = -0.010135 Jy ! Component: 150 - total flux cleaned = -0.0108957 Jy ! Component: 200 - total flux cleaned = -0.0112575 Jy ! Total flux subtracted in 200 components = -0.0112575 Jy ! Clean residual min=-0.019321 max=0.019913 Jy/beam ! Clean residual mean=-0.000007 rms=0.004765 Jy/beam ! Combined flux in latest and established models = 1.69478 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 1.69478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120341Jy sigma=0.498293 ! Fit after self-cal, rms=0.119996Jy sigma=0.497046 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119996Jy sigma=0.497046 ! Fit after self-cal, rms=0.074784Jy sigma=0.342651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7111 mas, bmaj=1.871 mas, bpa=-7.068 degrees ! Estimated noise=2.02418 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0114602 Jy ! Component: 100 - total flux cleaned = -0.0122233 Jy ! Component: 150 - total flux cleaned = -0.0127165 Jy ! Component: 200 - total flux cleaned = -0.0130857 Jy ! Total flux subtracted in 200 components = -0.0130857 Jy ! Clean residual min=-0.009302 max=0.007467 Jy/beam ! Clean residual mean=-0.000009 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 1.68169 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 1.68169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072631Jy sigma=0.334652 ! Fit after self-cal, rms=0.072028Jy sigma=0.332873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00328608 Jy ! Component: 100 - total flux cleaned = -0.00364844 Jy ! Component: 150 - total flux cleaned = -0.00391208 Jy ! Component: 200 - total flux cleaned = -0.00398332 Jy ! Total flux subtracted in 200 components = -0.00398332 Jy ! Clean residual min=-0.008245 max=0.007324 Jy/beam ! Clean residual mean=-0.000010 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 1.67771 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 1.67771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071601Jy sigma=0.331139 ! Fit after self-cal, rms=0.071471Jy sigma=0.330836 ! Inverting map ! Added new window around map position (1.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803005 Jy ! Component: 100 - total flux cleaned = 0.010903 Jy ! Component: 150 - total flux cleaned = 0.0107755 Jy ! Component: 200 - total flux cleaned = 0.0104583 Jy ! Total flux subtracted in 200 components = 0.0104583 Jy ! Clean residual min=-0.007876 max=0.006781 Jy/beam ! Clean residual mean=-0.000005 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 1.68816 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 90 components and 1.68817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070413Jy sigma=0.326357 ! Fit after self-cal, rms=0.070156Jy sigma=0.325604 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070156Jy sigma=0.325604 ! Fit after self-cal, rms=0.066707Jy sigma=0.313068 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.711 mas, bmaj=1.87 mas, bpa=-7.056 degrees ! Estimated noise=2.02617 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0059641 Jy ! Component: 100 - total flux cleaned = -0.00738112 Jy ! Component: 150 - total flux cleaned = -0.00791443 Jy ! Component: 200 - total flux cleaned = -0.00826578 Jy ! Total flux subtracted in 200 components = -0.00826578 Jy ! Clean residual min=-0.006039 max=0.004656 Jy/beam ! Clean residual mean=-0.000007 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 1.6799 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 97 components and 1.6799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065920Jy sigma=0.309906 ! Fit after self-cal, rms=0.065729Jy sigma=0.309352 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000969966 Jy ! Component: 100 - total flux cleaned = -0.000635907 Jy ! Component: 150 - total flux cleaned = -0.000780745 Jy ! Component: 200 - total flux cleaned = -0.000907071 Jy ! Total flux subtracted in 200 components = -0.000907071 Jy ! Clean residual min=-0.005317 max=0.004483 Jy/beam ! Clean residual mean=-0.000007 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 1.67899 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 102 components and 1.67899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065501Jy sigma=0.308337 ! Fit after self-cal, rms=0.065441Jy sigma=0.308172 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065441Jy sigma=0.308172 ! Fit after self-cal, rms=0.065221Jy sigma=0.307428 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.026 mas, bmaj=3.896 mas, bpa=-0.5691 degrees ! Estimated noise=3.22451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00418865 Jy ! Component: 100 - total flux cleaned = -0.0049502 Jy ! Component: 150 - total flux cleaned = -0.00542591 Jy ! Component: 200 - total flux cleaned = -0.0056994 Jy ! Total flux subtracted in 200 components = -0.0056994 Jy ! Clean residual min=-0.006698 max=0.004465 Jy/beam ! Clean residual mean=-0.000014 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 1.67329 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 110 components and 1.67329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065110Jy sigma=0.307287 ! Fit after self-cal, rms=0.065060Jy sigma=0.307104 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.39387e-05 Jy ! Component: 100 - total flux cleaned = -6.94488e-05 Jy ! Component: 150 - total flux cleaned = -0.00026213 Jy ! Component: 200 - total flux cleaned = -0.000327084 Jy ! Total flux subtracted in 200 components = -0.000327084 Jy ! Clean residual min=-0.006282 max=0.004312 Jy/beam ! Clean residual mean=-0.000014 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 1.67297 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 112 components and 1.67297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065032Jy sigma=0.307132 ! Fit after self-cal, rms=0.065017Jy sigma=0.307058 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.711 mas, bmaj=1.87 mas, bpa=-7.025 degrees ! Estimated noise=2.02617 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.711 x 1.87 at -7.025 degrees (North through East) ! Clean map min=-0.0067949 max=1.1616 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065017Jy sigma=0.307058 ! Fit after self-cal, rms=0.061438Jy sigma=0.286112 ! Inverting map and beam ! Estimated beam: bmin=0.7104 mas, bmaj=1.869 mas, bpa=-7.072 degrees ! Estimated noise=2.02307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00232315 Jy ! Component: 100 - total flux cleaned = -0.00326648 Jy ! Component: 150 - total flux cleaned = -0.00361879 Jy ! Component: 200 - total flux cleaned = -0.00355934 Jy ! Total flux subtracted in 200 components = -0.00355934 Jy ! Clean residual min=-0.004618 max=0.003915 Jy/beam ! Clean residual mean=-0.000007 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 1.66941 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 118 components and 1.66941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061225Jy sigma=0.285002 ! Fit after self-cal, rms=0.061210Jy sigma=0.284921 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.70892e-05 Jy ! Component: 100 - total flux cleaned = 0.000217244 Jy ! Component: 150 - total flux cleaned = 0.000371805 Jy ! Component: 200 - total flux cleaned = 0.000416774 Jy ! Total flux subtracted in 200 components = 0.000416774 Jy ! Clean residual min=-0.004476 max=0.003909 Jy/beam ! Clean residual mean=-0.000007 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 1.66982 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 123 components and 1.66982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061116Jy sigma=0.284486 ! Fit after self-cal, rms=0.061108Jy sigma=0.284438 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061108Jy sigma=0.284438 ! Fit after self-cal, rms=0.061033Jy sigma=0.284195 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5844 mas, bmaj=1.631 mas, bpa=-7.775 degrees ! Estimated noise=2.57995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.870254 Jy ! Component: 100 - total flux cleaned = 1.23159 Jy ! Component: 150 - total flux cleaned = 1.40685 Jy ! Component: 200 - total flux cleaned = 1.50302 Jy ! Total flux subtracted in 200 components = 1.50302 Jy ! Clean residual min=-0.018159 max=0.047391 Jy/beam ! Clean residual mean=-0.000051 rms=0.004183 Jy/beam ! Combined flux in latest and established models = 1.50302 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.50302 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7105 mas, bmaj=1.868 mas, bpa=-7.042 degrees ! Estimated noise=2.02344 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0730478 Jy ! Component: 100 - total flux cleaned = 0.10867 Jy ! Component: 150 - total flux cleaned = 0.12849 Jy ! Component: 200 - total flux cleaned = 0.141356 Jy ! Total flux subtracted in 200 components = 0.141356 Jy ! Clean residual min=-0.005388 max=0.008446 Jy/beam ! Clean residual mean=-0.000020 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 1.64437 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 1.64437 Jy ! Inverting map ! Added new window around map position (-1, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00948775 Jy ! Component: 100 - total flux cleaned = 0.0163166 Jy ! Component: 150 - total flux cleaned = 0.0211236 Jy ! Component: 200 - total flux cleaned = 0.0230107 Jy ! Total flux subtracted in 200 components = 0.0230107 Jy ! Clean residual min=-0.004639 max=0.003884 Jy/beam ! Clean residual mean=-0.000007 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 1.66738 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 48 components and 1.66738 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.028 mas, bmaj=3.893 mas, bpa=-0.5576 degrees ! Estimated noise=3.22335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381926 Jy ! Component: 100 - total flux cleaned = 0.0046903 Jy ! Component: 150 - total flux cleaned = 0.00518219 Jy ! Component: 200 - total flux cleaned = 0.00547245 Jy ! Total flux subtracted in 200 components = 0.00547245 Jy ! Clean residual min=-0.004749 max=0.003712 Jy/beam ! Clean residual mean=-0.000012 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 1.67286 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.14537e-05 Jy ! Component: 100 - total flux cleaned = -8.02196e-05 Jy ! Component: 150 - total flux cleaned = -0.000151547 Jy ! Component: 200 - total flux cleaned = -0.00018299 Jy ! Total flux subtracted in 200 components = -0.00018299 Jy ! Clean residual min=-0.004644 max=0.003617 Jy/beam ! Clean residual mean=-0.000012 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 1.67267 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 93 components and 1.67267 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7105 mas, bmaj=1.868 mas, bpa=-7.042 degrees ! Estimated noise=2.02344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000461702 Jy ! Component: 100 - total flux cleaned = -0.000219501 Jy ! Component: 150 - total flux cleaned = 3.72751e-06 Jy ! Component: 200 - total flux cleaned = 0.000106781 Jy ! Total flux subtracted in 200 components = 0.000106781 Jy ! Clean residual min=-0.004214 max=0.003582 Jy/beam ! Clean residual mean=-0.000005 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 1.67278 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 100 components and 1.67278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061048Jy sigma=0.285113 ! Fit after self-cal, rms=0.061008Jy sigma=0.284869 wmodel J2129-1538_X_d_map.mod ! Writing 100 model components to file: J2129-1538_X_d_map.mod wobs J2129-1538_X_d_uvs.fits ! Writing UV FITS file: J2129-1538_X_d_uvs.fits wwins J2129-1538_X_d_map.win ! wwins: Wrote 4 windows to J2129-1538_X_d_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126837 Jy ! Component: 100 - total flux cleaned = -0.0019131 Jy ! Component: 150 - total flux cleaned = -0.00240057 Jy ! Component: 200 - total flux cleaned = -0.00251695 Jy ! Component: 250 - total flux cleaned = -0.00257363 Jy ! Component: 300 - total flux cleaned = -0.00251934 Jy ! Component: 350 - total flux cleaned = -0.00236131 Jy ! Component: 400 - total flux cleaned = -0.00225896 Jy ! Component: 450 - total flux cleaned = -0.00220945 Jy ! Component: 500 - total flux cleaned = -0.0021117 Jy ! Component: 550 - total flux cleaned = -0.00211172 Jy ! Component: 600 - total flux cleaned = -0.00197071 Jy ! Component: 650 - total flux cleaned = -0.0018329 Jy ! Component: 700 - total flux cleaned = -0.00178832 Jy ! Component: 750 - total flux cleaned = -0.00165482 Jy ! Component: 800 - total flux cleaned = -0.0015674 Jy ! Component: 850 - total flux cleaned = -0.00139552 Jy ! Component: 900 - total flux cleaned = -0.0013531 Jy ! Component: 950 - total flux cleaned = -0.00114567 Jy ! Component: 1000 - total flux cleaned = -0.000860355 Jy ! Component: 1050 - total flux cleaned = -0.000820268 Jy ! Component: 1100 - total flux cleaned = -0.000582314 Jy ! Component: 1150 - total flux cleaned = -0.000582541 Jy ! Component: 1200 - total flux cleaned = -0.00038972 Jy ! Component: 1250 - total flux cleaned = -0.000427878 Jy ! Component: 1300 - total flux cleaned = -0.000315892 Jy ! Component: 1350 - total flux cleaned = -0.000278665 Jy ! Component: 1400 - total flux cleaned = -0.000131605 Jy ! Component: 1450 - total flux cleaned = -5.96996e-05 Jy ! Component: 1500 - total flux cleaned = -2.45434e-05 Jy ! Component: 1550 - total flux cleaned = 0.000116798 Jy ! Component: 1600 - total flux cleaned = 0.00025639 Jy ! Component: 1650 - total flux cleaned = 0.000290463 Jy ! Component: 1700 - total flux cleaned = 0.000324103 Jy ! Component: 1750 - total flux cleaned = 0.000324292 Jy ! Component: 1800 - total flux cleaned = 0.000458476 Jy ! Component: 1850 - total flux cleaned = 0.000392665 Jy ! Component: 1900 - total flux cleaned = 0.000556394 Jy ! Component: 1950 - total flux cleaned = 0.000393152 Jy ! Component: 2000 - total flux cleaned = 0.000521058 Jy ! Component: 2050 - total flux cleaned = 0.000425365 Jy ! Component: 2100 - total flux cleaned = 0.000425238 Jy ! Component: 2150 - total flux cleaned = 0.000549621 Jy ! Component: 2200 - total flux cleaned = 0.000426 Jy ! Component: 2250 - total flux cleaned = 0.000456665 Jy ! Component: 2300 - total flux cleaned = 0.000305338 Jy ! Component: 2350 - total flux cleaned = 0.000485387 Jy ! Component: 2400 - total flux cleaned = 0.000277482 Jy ! Component: 2450 - total flux cleaned = 0.000277495 Jy ! Component: 2500 - total flux cleaned = 0.000219148 Jy ! Component: 2550 - total flux cleaned = 0.000276751 Jy ! Component: 2600 - total flux cleaned = 0.000248231 Jy ! Component: 2650 - total flux cleaned = 0.000248415 Jy ! Component: 2700 - total flux cleaned = 0.000276443 Jy ! Component: 2750 - total flux cleaned = 0.000304192 Jy ! Component: 2800 - total flux cleaned = 0.000276351 Jy ! Component: 2850 - total flux cleaned = 0.000276583 Jy ! Component: 2900 - total flux cleaned = 0.000385175 Jy ! Component: 2950 - total flux cleaned = 0.000330865 Jy ! Component: 3000 - total flux cleaned = 0.000331022 Jy ! Component: 3050 - total flux cleaned = 0.000357597 Jy ! Component: 3100 - total flux cleaned = 0.000330974 Jy ! Component: 3150 - total flux cleaned = 0.000252861 Jy ! Component: 3200 - total flux cleaned = 0.000278932 Jy ! Component: 3250 - total flux cleaned = 0.000227771 Jy ! Component: 3300 - total flux cleaned = 0.000354929 Jy ! Component: 3350 - total flux cleaned = 0.000152614 Jy ! Component: 3400 - total flux cleaned = 0.000177896 Jy ! Component: 3450 - total flux cleaned = 0.000128065 Jy ! Component: 3500 - total flux cleaned = 0.00015287 Jy ! Component: 3550 - total flux cleaned = 5.50853e-05 Jy ! Component: 3600 - total flux cleaned = 5.51404e-05 Jy ! Component: 3650 - total flux cleaned = 7.2742e-06 Jy ! Component: 3700 - total flux cleaned = 3.12778e-05 Jy ! Component: 3750 - total flux cleaned = 7.88629e-05 Jy ! Component: 3800 - total flux cleaned = 0.000102332 Jy ! Component: 3850 - total flux cleaned = 7.89721e-05 Jy ! Component: 3900 - total flux cleaned = 5.55109e-05 Jy ! Component: 3950 - total flux cleaned = 7.86355e-05 Jy ! Component: 4000 - total flux cleaned = 0.000101679 Jy ! Component: 4050 - total flux cleaned = 5.65324e-05 Jy ! Total flux subtracted in 4096 components = 0.000101719 Jy ! Clean residual min=-0.001389 max=0.001395 Jy/beam ! Clean residual mean=-0.000001 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 1.67288 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 405 components and 1.67288 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2129-1538_X_d_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7105 x 1.868 at -7.042 degrees (North through East) ! Clean map min=-0.0025897 max=1.1668 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2129-1538_X_d_map.fits wmodel /image_prod/ug002_uva//J2129-1538_X_d_map.mod ! Writing 405 model components to file: /image_prod/ug002_uva//J2129-1538_X_d_map.mod wobs /image_prod/ug002_uva//J2129-1538_X_d_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2129-1538_X_d_uvs.fits wwins /image_prod/ug002_uva//J2129-1538_X_d_map.win ! wwins: Wrote 5 windows to /image_prod/ug002_uva//J2129-1538_X_d_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.16684 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00037874 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0973756 0.0973756 0.194751 0.389502 0.779005 1.55801 3.11602 6.23204 12.4641 24.9282 49.8563 99.7126 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.166 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3080.85 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2129-1538_X_d_dfm.log closed on Thu Mar 5 05:16:02 2020