! Started logfile: /image_prod/ug002_uva//J2129-1538_S_k_dfm.log on Thu Mar  5 05:15:26 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2129-1538_S_k_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2129-1538_S_k_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.742857 visibilities/baseline/integration-bin.
! Found source: J2129-1538
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 1404 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2129-1538_S_k]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.295551Jy  sigma=8.320476
! Fit after  self-cal, rms=0.220125Jy  sigma=1.324630
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.889 mas, bmaj=7.638 mas, bpa=6.189 degrees
! Estimated noise=3.92361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.642747 Jy
! Component: 100  -  total flux cleaned = 0.78297 Jy
! Total flux subtracted in 100 components = 0.78297 Jy
! Clean residual min=-0.031933 max=0.040352 Jy/beam
! Clean residual mean=0.000024 rms=0.007632 Jy/beam
! Combined flux in latest and established models = 0.78297 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.78297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.135950Jy  sigma=0.807487
! Fit after  self-cal, rms=0.135944Jy  sigma=0.807480
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.361 mas, bmaj=8.697 mas, bpa=4.982 degrees
! Estimated noise=3.13005 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0454524 Jy
! Component: 100  -  total flux cleaned = 0.0682795 Jy
! Component: 150  -  total flux cleaned = 0.0806279 Jy
! Component: 200  -  total flux cleaned = 0.085391 Jy
! Total flux subtracted in 200 components = 0.085391 Jy
! Clean residual min=-0.030274 max=0.024602 Jy/beam
! Clean residual mean=0.000014 rms=0.005417 Jy/beam
! Combined flux in latest and established models = 0.868361 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 22 components and 0.868361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.121409Jy  sigma=0.697905
! Fit after  self-cal, rms=0.121422Jy  sigma=0.697860
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.361 x 8.697 at 4.982 degrees (North through East)
! Clean map  min=-0.029264  max=0.81189 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.15     KP        0.99     
!   LA        1.05     MK        0.99     NL        0.97     OV        0.90     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.12     KP        1.02     
!   LA        1.01     MK        1.01     NL        0.92     OV        0.91     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        1.01     HN        1.12     KP        1.01     
!   LA        1.03     MK        1.02     NL        0.92     OV        0.89     
!   PT        1.06     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.121422Jy  sigma=0.697860
! Fit after  self-cal, rms=0.103708Jy  sigma=0.546138
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.375 mas, bmaj=8.718 mas, bpa=5.081 degrees
! Estimated noise=3.15796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0014679 Jy
! Component: 100  -  total flux cleaned = -0.00176027 Jy
! Component: 150  -  total flux cleaned = -0.00250911 Jy
! Component: 200  -  total flux cleaned = -0.00342678 Jy
! Total flux subtracted in 200 components = -0.00342678 Jy
! Clean residual min=-0.013744 max=0.014564 Jy/beam
! Clean residual mean=0.000025 rms=0.003358 Jy/beam
! Combined flux in latest and established models = 0.864935 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 31 components and 0.864935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102091Jy  sigma=0.538800
! Fit after  self-cal, rms=0.102164Jy  sigma=0.538709
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102164Jy  sigma=0.538709
! Fit after  self-cal, rms=0.088040Jy  sigma=0.468148
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=8.748 mas, bpa=5.099 degrees
! Estimated noise=3.15374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00123529 Jy
! Component: 100  -  total flux cleaned = -0.00156051 Jy
! Component: 150  -  total flux cleaned = -0.001707 Jy
! Component: 200  -  total flux cleaned = -0.0018431 Jy
! Total flux subtracted in 200 components = -0.0018431 Jy
! Clean residual min=-0.007314 max=0.007928 Jy/beam
! Clean residual mean=-0.000003 rms=0.001715 Jy/beam
! Combined flux in latest and established models = 0.863091 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 39 components and 0.863092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087384Jy  sigma=0.464789
! Fit after  self-cal, rms=0.087397Jy  sigma=0.464658
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, -29.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00670829 Jy
! Component: 100  -  total flux cleaned = 0.00763634 Jy
! Component: 150  -  total flux cleaned = 0.00789636 Jy
! Component: 200  -  total flux cleaned = 0.00790596 Jy
! Total flux subtracted in 200 components = 0.00790596 Jy
! Clean residual min=-0.006957 max=0.006276 Jy/beam
! Clean residual mean=-0.000000 rms=0.001526 Jy/beam
! Combined flux in latest and established models = 0.870997 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 51 components and 0.870997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086737Jy  sigma=0.459894
! Fit after  self-cal, rms=0.086743Jy  sigma=0.459736
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086743Jy  sigma=0.459736
! Fit after  self-cal, rms=0.086806Jy  sigma=0.459310
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.375 mas, bmaj=8.743 mas, bpa=5.051 degrees
! Estimated noise=3.15221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000240686 Jy
! Component: 100  -  total flux cleaned = 3.13061e-05 Jy
! Component: 150  -  total flux cleaned = 0.000221716 Jy
! Component: 200  -  total flux cleaned = 0.000395063 Jy
! Total flux subtracted in 200 components = 0.000395063 Jy
! Clean residual min=-0.006663 max=0.005986 Jy/beam
! Clean residual mean=-0.000001 rms=0.001450 Jy/beam
! Combined flux in latest and established models = 0.871393 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 61 components and 0.871392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086558Jy  sigma=0.457834
! Fit after  self-cal, rms=0.086575Jy  sigma=0.457806
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000292411 Jy
! Component: 100  -  total flux cleaned = 0.000528401 Jy
! Component: 150  -  total flux cleaned = 0.000600097 Jy
! Component: 200  -  total flux cleaned = 0.000672236 Jy
! Total flux subtracted in 200 components = 0.000672236 Jy
! Clean residual min=-0.006577 max=0.005799 Jy/beam
! Clean residual mean=-0.000001 rms=0.001418 Jy/beam
! Combined flux in latest and established models = 0.872065 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 71 components and 0.872065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086433Jy  sigma=0.456983
! Fit after  self-cal, rms=0.086444Jy  sigma=0.456971
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086444Jy  sigma=0.456971
! Fit after  self-cal, rms=0.086521Jy  sigma=0.456853
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.699 mas, bmaj=16.35 mas, bpa=7.63 degrees
! Estimated noise=3.7516 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178593 Jy
! Component: 100  -  total flux cleaned = 0.00238845 Jy
! Component: 150  -  total flux cleaned = 0.00295765 Jy
! Component: 200  -  total flux cleaned = 0.00326355 Jy
! Total flux subtracted in 200 components = 0.00326355 Jy
! Clean residual min=-0.006534 max=0.006063 Jy/beam
! Clean residual mean=0.000001 rms=0.001645 Jy/beam
! Combined flux in latest and established models = 0.875328 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 84 components and 0.875328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086464Jy  sigma=0.456837
! Fit after  self-cal, rms=0.086465Jy  sigma=0.456806
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000500999 Jy
! Component: 100  -  total flux cleaned = 0.000593292 Jy
! Component: 150  -  total flux cleaned = 0.000681814 Jy
! Component: 200  -  total flux cleaned = 0.000722767 Jy
! Total flux subtracted in 200 components = 0.000722767 Jy
! Clean residual min=-0.006452 max=0.005814 Jy/beam
! Clean residual mean=0.000001 rms=0.001620 Jy/beam
! Combined flux in latest and established models = 0.876051 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 88 components and 0.876051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086434Jy  sigma=0.456657
! Fit after  self-cal, rms=0.086436Jy  sigma=0.456648
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.374 mas, bmaj=8.742 mas, bpa=5.016 degrees
! Estimated noise=3.15205 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.374 x 8.742 at 5.016 degrees (North through East)
! Clean map  min=-0.0060016  max=0.82187 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086436Jy  sigma=0.456648
! Fit after  self-cal, rms=0.082925Jy  sigma=0.430832
! Inverting map and beam 
! Estimated beam: bmin=3.371 mas, bmaj=8.737 mas, bpa=4.973 degrees
! Estimated noise=3.15265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173655 Jy
! Component: 100  -  total flux cleaned = -0.000465354 Jy
! Component: 150  -  total flux cleaned = -0.000595736 Jy
! Component: 200  -  total flux cleaned = -0.000596907 Jy
! Total flux subtracted in 200 components = -0.000596907 Jy
! Clean residual min=-0.006146 max=0.005304 Jy/beam
! Clean residual mean=-0.000003 rms=0.001347 Jy/beam
! Combined flux in latest and established models = 0.875454 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 94 components and 0.875454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082785Jy  sigma=0.430044
! Fit after  self-cal, rms=0.082794Jy  sigma=0.430034
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.4738e-05 Jy
! Component: 100  -  total flux cleaned = 9.91097e-05 Jy
! Component: 150  -  total flux cleaned = 0.000148752 Jy
! Component: 200  -  total flux cleaned = 0.00019791 Jy
! Total flux subtracted in 200 components = 0.00019791 Jy
! Clean residual min=-0.006124 max=0.005279 Jy/beam
! Clean residual mean=-0.000003 rms=0.001333 Jy/beam
! Combined flux in latest and established models = 0.875652 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 101 components and 0.875652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082724Jy  sigma=0.429586
! Fit after  self-cal, rms=0.082736Jy  sigma=0.429580
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082736Jy  sigma=0.429580
! Fit after  self-cal, rms=0.082807Jy  sigma=0.429488
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.892 mas, bmaj=7.667 mas, bpa=6.399 degrees
! Estimated noise=3.9484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.642579 Jy
! Component: 100  -  total flux cleaned = 0.782772 Jy
! Component: 150  -  total flux cleaned = 0.823603 Jy
! Component: 200  -  total flux cleaned = 0.842964 Jy
! Total flux subtracted in 200 components = 0.842964 Jy
! Clean residual min=-0.008405 max=0.009594 Jy/beam
! Clean residual mean=0.000000 rms=0.002193 Jy/beam
! Combined flux in latest and established models = 0.842964 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.842964 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.369 mas, bmaj=8.733 mas, bpa=4.96 degrees
! Estimated noise=3.15171 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.5, 9.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122487 Jy
! Component: 100  -  total flux cleaned = 0.0199581 Jy
! Component: 150  -  total flux cleaned = 0.0232085 Jy
! Component: 200  -  total flux cleaned = 0.02531 Jy
! Total flux subtracted in 200 components = 0.02531 Jy
! Clean residual min=-0.007026 max=0.006032 Jy/beam
! Clean residual mean=-0.000006 rms=0.001545 Jy/beam
! Combined flux in latest and established models = 0.868274 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 38 components and 0.868274 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.697 mas, bmaj=16.34 mas, bpa=7.586 degrees
! Estimated noise=3.75584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00444471 Jy
! Component: 100  -  total flux cleaned = 0.00590172 Jy
! Component: 150  -  total flux cleaned = 0.00712645 Jy
! Component: 200  -  total flux cleaned = 0.00817937 Jy
! Total flux subtracted in 200 components = 0.00817937 Jy
! Clean residual min=-0.006618 max=0.005822 Jy/beam
! Clean residual mean=-0.000006 rms=0.001604 Jy/beam
! Combined flux in latest and established models = 0.876453 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000766275 Jy
! Component: 100  -  total flux cleaned = 0.00131408 Jy
! Component: 150  -  total flux cleaned = 0.00162557 Jy
! Component: 200  -  total flux cleaned = 0.00174284 Jy
! Total flux subtracted in 200 components = 0.00174284 Jy
! Clean residual min=-0.006297 max=0.005591 Jy/beam
! Clean residual mean=-0.000005 rms=0.001560 Jy/beam
! Combined flux in latest and established models = 0.878196 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 63 components and 0.878196 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.369 mas, bmaj=8.733 mas, bpa=4.96 degrees
! Estimated noise=3.15171 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00195095 Jy
! Component: 100  -  total flux cleaned = -0.00196395 Jy
! Component: 150  -  total flux cleaned = -0.00207949 Jy
! Component: 200  -  total flux cleaned = -0.00208285 Jy
! Total flux subtracted in 200 components = -0.00208285 Jy
! Clean residual min=-0.006213 max=0.005628 Jy/beam
! Clean residual mean=-0.000004 rms=0.001379 Jy/beam
! Combined flux in latest and established models = 0.876113 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 80 components and 0.876113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083052Jy  sigma=0.431382
! Fit after  self-cal, rms=0.083025Jy  sigma=0.431211
wmodel J2129-1538_S_k_map.mod
! Writing 80 model components to file: J2129-1538_S_k_map.mod
wobs   J2129-1538_S_k_uvs.fits
! Writing UV FITS file: J2129-1538_S_k_uvs.fits
wwins  J2129-1538_S_k_map.win
! wwins: Wrote 3 windows to J2129-1538_S_k_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000616292 Jy
! Component: 100  -  total flux cleaned = 0.000628822 Jy
! Component: 150  -  total flux cleaned = 0.00188286 Jy
! Component: 200  -  total flux cleaned = 0.00247954 Jy
! Component: 250  -  total flux cleaned = 0.00305143 Jy
! Component: 300  -  total flux cleaned = 0.00383834 Jy
! Component: 350  -  total flux cleaned = 0.00452424 Jy
! Component: 400  -  total flux cleaned = 0.00496676 Jy
! Component: 450  -  total flux cleaned = 0.00532424 Jy
! Component: 500  -  total flux cleaned = 0.00567075 Jy
! Component: 550  -  total flux cleaned = 0.00587432 Jy
! Component: 600  -  total flux cleaned = 0.00620659 Jy
! Component: 650  -  total flux cleaned = 0.00646532 Jy
! Component: 700  -  total flux cleaned = 0.00671742 Jy
! Component: 750  -  total flux cleaned = 0.00690247 Jy
! Component: 800  -  total flux cleaned = 0.00738591 Jy
! Component: 850  -  total flux cleaned = 0.00756343 Jy
! Component: 900  -  total flux cleaned = 0.00797038 Jy
! Component: 950  -  total flux cleaned = 0.0082559 Jy
! Component: 1000  -  total flux cleaned = 0.00859281 Jy
! Component: 1050  -  total flux cleaned = 0.00881343 Jy
! Component: 1100  -  total flux cleaned = 0.00919263 Jy
! Component: 1150  -  total flux cleaned = 0.00919078 Jy
! Component: 1200  -  total flux cleaned = 0.00940146 Jy
! Component: 1250  -  total flux cleaned = 0.00945253 Jy
! Component: 1300  -  total flux cleaned = 0.00955517 Jy
! Component: 1350  -  total flux cleaned = 0.00960595 Jy
! Component: 1400  -  total flux cleaned = 0.00990329 Jy
! Component: 1450  -  total flux cleaned = 0.0100992 Jy
! Component: 1500  -  total flux cleaned = 0.0102908 Jy
! Component: 1550  -  total flux cleaned = 0.0104795 Jy
! Component: 1600  -  total flux cleaned = 0.0105258 Jy
! Component: 1650  -  total flux cleaned = 0.0105255 Jy
! Component: 1700  -  total flux cleaned = 0.0106626 Jy
! Component: 1750  -  total flux cleaned = 0.0107081 Jy
! Component: 1800  -  total flux cleaned = 0.0109306 Jy
! Component: 1850  -  total flux cleaned = 0.0111504 Jy
! Component: 1900  -  total flux cleaned = 0.0115399 Jy
! Component: 1950  -  total flux cleaned = 0.011711 Jy
! Component: 2000  -  total flux cleaned = 0.0118805 Jy
! Component: 2050  -  total flux cleaned = 0.01209 Jy
! Component: 2100  -  total flux cleaned = 0.0123383 Jy
! Component: 2150  -  total flux cleaned = 0.0126243 Jy
! Component: 2200  -  total flux cleaned = 0.0126244 Jy
! Component: 2250  -  total flux cleaned = 0.0127053 Jy
! Component: 2300  -  total flux cleaned = 0.0129437 Jy
! Component: 2350  -  total flux cleaned = 0.0131007 Jy
! Component: 2400  -  total flux cleaned = 0.01314 Jy
! Component: 2450  -  total flux cleaned = 0.0132554 Jy
! Component: 2500  -  total flux cleaned = 0.0134848 Jy
! Component: 2550  -  total flux cleaned = 0.0136735 Jy
! Component: 2600  -  total flux cleaned = 0.0138604 Jy
! Component: 2650  -  total flux cleaned = 0.0140455 Jy
! Component: 2700  -  total flux cleaned = 0.0141552 Jy
! Component: 2750  -  total flux cleaned = 0.0143365 Jy
! Component: 2800  -  total flux cleaned = 0.0143725 Jy
! Component: 2850  -  total flux cleaned = 0.014694 Jy
! Component: 2900  -  total flux cleaned = 0.0147652 Jy
! Component: 2950  -  total flux cleaned = 0.0149755 Jy
! Component: 3000  -  total flux cleaned = 0.0150452 Jy
! Component: 3050  -  total flux cleaned = 0.0152173 Jy
! Component: 3100  -  total flux cleaned = 0.0153194 Jy
! Component: 3150  -  total flux cleaned = 0.0153871 Jy
! Component: 3200  -  total flux cleaned = 0.015488 Jy
! Component: 3250  -  total flux cleaned = 0.0155544 Jy
! Component: 3300  -  total flux cleaned = 0.0155877 Jy
! Component: 3350  -  total flux cleaned = 0.0157186 Jy
! Component: 3400  -  total flux cleaned = 0.0157508 Jy
! Component: 3450  -  total flux cleaned = 0.0159433 Jy
! Component: 3500  -  total flux cleaned = 0.0158797 Jy
! Component: 3550  -  total flux cleaned = 0.015912 Jy
! Component: 3600  -  total flux cleaned = 0.0159749 Jy
! Component: 3650  -  total flux cleaned = 0.0162245 Jy
! Component: 3700  -  total flux cleaned = 0.016255 Jy
! Component: 3750  -  total flux cleaned = 0.0163477 Jy
! Component: 3800  -  total flux cleaned = 0.0164695 Jy
! Component: 3850  -  total flux cleaned = 0.0163785 Jy
! Component: 3900  -  total flux cleaned = 0.0165596 Jy
! Component: 3950  -  total flux cleaned = 0.0164702 Jy
! Component: 4000  -  total flux cleaned = 0.0166485 Jy
! Component: 4050  -  total flux cleaned = 0.0167077 Jy
! Total flux subtracted in 4096 components = 0.0166491 Jy
! Clean residual min=-0.001674 max=0.001586 Jy/beam
! Clean residual mean=0.000000 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.892762 Jy
keep
! Adding 254 model components to the UV plane model.
! The established model now contains 334 components and 0.892763 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2129-1538_S_k_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.369 x 8.733 at 4.96 degrees (North through East)
! Clean map  min=-0.0039034  max=0.82274 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2129-1538_S_k_map.fits
wmodel /image_prod/ug002_uva//J2129-1538_S_k_map.mod
! Writing 334 model components to file: /image_prod/ug002_uva//J2129-1538_S_k_map.mod
wobs   /image_prod/ug002_uva//J2129-1538_S_k_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2129-1538_S_k_uvs.fits
wwins  /image_prod/ug002_uva//J2129-1538_S_k_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2129-1538_S_k_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.822744 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00051779 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.188803 0.188803 0.377607 0.755214 1.51043 3.02085 6.04171 12.0834 24.1668 48.3337 96.6673
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.822 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1588.95 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2129-1538_S_k_dfm.log closed on Thu Mar  5 05:15:29 2020