! Started logfile: /image_prod/ug002_uva//J2125+6423_X_dfm.log on Thu Mar 5 05:13:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2125+6423_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2125+6423_X_uva.fits ! AN table 1: 80 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.977778 visibilities/baseline/integration-bin. ! Found source: J2125+6423 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 33792 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2125+6423_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.010426Jy sigma=9.175111 ! Fit after self-cal, rms=0.870762Jy sigma=7.850331 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7292 mas, bmaj=0.8932 mas, bpa=-13.95 degrees ! Estimated noise=0.929065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0838674 Jy ! Component: 100 - total flux cleaned = 0.120918 Jy ! Total flux subtracted in 100 components = 0.120918 Jy ! Clean residual min=-0.009263 max=0.036203 Jy/beam ! Clean residual mean=0.000029 rms=0.002382 Jy/beam ! Combined flux in latest and established models = 0.120918 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.120918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106811Jy sigma=0.957586 ! Fit after self-cal, rms=0.106428Jy sigma=0.954383 ! Inverting map ! Added new window around map position (0.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314828 Jy ! Component: 100 - total flux cleaned = 0.0501327 Jy ! Total flux subtracted in 100 components = 0.0501327 Jy ! Clean residual min=-0.007490 max=0.019962 Jy/beam ! Clean residual mean=0.000034 rms=0.001764 Jy/beam ! Combined flux in latest and established models = 0.171051 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 26 components and 0.171051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087613Jy sigma=0.775751 ! Fit after self-cal, rms=0.086326Jy sigma=0.765782 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016776 Jy ! Component: 100 - total flux cleaned = 0.0280777 Jy ! Total flux subtracted in 100 components = 0.0280777 Jy ! Clean residual min=-0.006055 max=0.012999 Jy/beam ! Clean residual mean=0.000036 rms=0.001417 Jy/beam ! Combined flux in latest and established models = 0.199129 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.199129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078597Jy sigma=0.694168 ! Fit after self-cal, rms=0.078221Jy sigma=0.691370 ! Inverting map ! Added new window around map position (-0.4, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115742 Jy ! Component: 100 - total flux cleaned = 0.0197004 Jy ! Total flux subtracted in 100 components = 0.0197004 Jy ! Clean residual min=-0.005172 max=0.009548 Jy/beam ! Clean residual mean=0.000038 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.218829 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.218829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074304Jy sigma=0.656817 ! Fit after self-cal, rms=0.074242Jy sigma=0.656356 ! Inverting map ! Added new window around map position (0.2, -14). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107977 Jy ! Component: 100 - total flux cleaned = 0.018613 Jy ! Total flux subtracted in 100 components = 0.018613 Jy ! Clean residual min=-0.004938 max=0.007088 Jy/beam ! Clean residual mean=0.000034 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.237442 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.237442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070069Jy sigma=0.616139 ! Fit after self-cal, rms=0.069988Jy sigma=0.614758 ! Inverting map ! Added new window around map position (0.4, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00782594 Jy ! Component: 100 - total flux cleaned = 0.0142426 Jy ! Total flux subtracted in 100 components = 0.0142426 Jy ! Clean residual min=-0.004425 max=0.005210 Jy/beam ! Clean residual mean=0.000033 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.251685 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 69 components and 0.251685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067437Jy sigma=0.591249 ! Fit after self-cal, rms=0.067408Jy sigma=0.590828 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9744 mas, bmaj=1.167 mas, bpa=-12.25 degrees ! Estimated noise=0.430869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, -12.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159865 Jy ! Component: 100 - total flux cleaned = 0.0278845 Jy ! Component: 150 - total flux cleaned = 0.0373377 Jy ! Component: 200 - total flux cleaned = 0.0450608 Jy ! Total flux subtracted in 200 components = 0.0450608 Jy ! Clean residual min=-0.005497 max=0.013402 Jy/beam ! Clean residual mean=0.000111 rms=0.001896 Jy/beam ! Combined flux in latest and established models = 0.296745 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 126 components and 0.296745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061695Jy sigma=0.539368 ! Fit after self-cal, rms=0.061415Jy sigma=0.535543 ! Inverting map ! Added new window around map position (1.2, -19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144479 Jy ! Component: 100 - total flux cleaned = 0.0238465 Jy ! Component: 150 - total flux cleaned = 0.0316928 Jy ! Component: 200 - total flux cleaned = 0.038531 Jy ! Total flux subtracted in 200 components = 0.038531 Jy ! Clean residual min=-0.004164 max=0.006908 Jy/beam ! Clean residual mean=0.000080 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.335276 Jy ! Performing phase self-cal ! Adding 116 model components to the UV plane model. ! The established model now contains 220 components and 0.335276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057007Jy sigma=0.490565 ! Fit after self-cal, rms=0.056782Jy sigma=0.488368 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9744 x 1.167 at -12.25 degrees (North through East) ! Clean map min=-0.0038766 max=0.12176 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.02 KP 1.00 ! LA 0.99 MK 1.03 OV 0.92 PT 0.87 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.05 KP 1.01 ! LA 0.98 MK 1.00 OV 0.93 PT 0.87 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.01 KP 1.01 ! LA 0.99 MK 1.03 OV 0.92 PT 0.88 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.03 KP 1.00 ! LA 0.99 MK 1.02 OV 0.93 PT 0.87 ! SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.03 KP 1.00 ! LA 0.99 MK 1.03 OV 0.94 PT 0.88 ! SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.02 KP 1.00 ! LA 0.98 MK 1.02 OV 0.93 PT 0.87 ! SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.01 KP 1.01 ! LA 0.99 MK 1.04 OV 0.94 PT 0.88 ! SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.01 KP 1.01 ! LA 1.00 MK 1.05 OV 0.95 PT 0.87 ! SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.03 KP 1.01 ! LA 0.99 MK 1.06 OV 0.94 PT 0.88 ! SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.00 KP 1.01 ! LA 0.99 MK 1.05 OV 0.95 PT 0.87 ! SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.01 KP 1.00 ! LA 0.99 MK 1.06 OV 0.96 PT 0.89 ! SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.00 KP 1.02 ! LA 0.99 MK 1.10 OV 0.94 PT 0.88 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.056782Jy sigma=0.488368 ! Fit after self-cal, rms=0.053770Jy sigma=0.469735 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9924 mas, bmaj=1.187 mas, bpa=-11.96 degrees ! Estimated noise=0.420861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0061308 Jy ! Component: 100 - total flux cleaned = 0.0107825 Jy ! Component: 150 - total flux cleaned = 0.0145325 Jy ! Component: 200 - total flux cleaned = 0.0176697 Jy ! Total flux subtracted in 200 components = 0.0176697 Jy ! Clean residual min=-0.002220 max=0.003973 Jy/beam ! Clean residual mean=0.000038 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.352946 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 273 components and 0.352946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052844Jy sigma=0.458406 ! Fit after self-cal, rms=0.052800Jy sigma=0.457684 ! Inverting map ! Added new window around map position (-0.2, -16.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381843 Jy ! Component: 100 - total flux cleaned = 0.00616741 Jy ! Component: 150 - total flux cleaned = 0.00820298 Jy ! Component: 200 - total flux cleaned = 0.009985 Jy ! Total flux subtracted in 200 components = 0.009985 Jy ! Clean residual min=-0.001892 max=0.002049 Jy/beam ! Clean residual mean=0.000027 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.362931 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 316 components and 0.362931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052417Jy sigma=0.453205 ! Fit after self-cal, rms=0.052399Jy sigma=0.452983 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052399Jy sigma=0.452983 ! Fit after self-cal, rms=0.052426Jy sigma=0.449883 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9895 mas, bmaj=1.183 mas, bpa=-12.43 degrees ! Estimated noise=0.421534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001848 Jy ! Component: 100 - total flux cleaned = 0.00309723 Jy ! Component: 150 - total flux cleaned = 0.00424789 Jy ! Component: 200 - total flux cleaned = 0.00521856 Jy ! Total flux subtracted in 200 components = 0.00521856 Jy ! Clean residual min=-0.001457 max=0.001739 Jy/beam ! Clean residual mean=0.000004 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.368149 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 336 components and 0.368149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052316Jy sigma=0.448599 ! Fit after self-cal, rms=0.052317Jy sigma=0.448524 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.2, 40.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172685 Jy ! Component: 100 - total flux cleaned = 0.00270398 Jy ! Component: 150 - total flux cleaned = 0.00357526 Jy ! Component: 200 - total flux cleaned = 0.00440397 Jy ! Total flux subtracted in 200 components = 0.00440397 Jy ! Clean residual min=-0.001425 max=0.001470 Jy/beam ! Clean residual mean=0.000003 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.372553 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 359 components and 0.372553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052241Jy sigma=0.447586 ! Fit after self-cal, rms=0.052234Jy sigma=0.447542 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052234Jy sigma=0.447542 ! Fit after self-cal, rms=0.052165Jy sigma=0.447445 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9879 mas, bmaj=1.182 mas, bpa=-12.41 degrees ! Estimated noise=0.420628 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910589 Jy ! Component: 100 - total flux cleaned = 0.00170457 Jy ! Component: 150 - total flux cleaned = 0.002392 Jy ! Component: 200 - total flux cleaned = 0.00305387 Jy ! Total flux subtracted in 200 components = 0.00305387 Jy ! Clean residual min=-0.001315 max=0.001394 Jy/beam ! Clean residual mean=0.000006 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.375607 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 368 components and 0.375607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052121Jy sigma=0.446924 ! Fit after self-cal, rms=0.052117Jy sigma=0.446896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359316 Jy ! Component: 100 - total flux cleaned = 0.000940216 Jy ! Component: 150 - total flux cleaned = 0.00144524 Jy ! Component: 200 - total flux cleaned = 0.00193561 Jy ! Total flux subtracted in 200 components = 0.00193561 Jy ! Clean residual min=-0.001228 max=0.001335 Jy/beam ! Clean residual mean=0.000004 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.377543 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 380 components and 0.377543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052090Jy sigma=0.446588 ! Fit after self-cal, rms=0.052086Jy sigma=0.446564 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052086Jy sigma=0.446564 ! Fit after self-cal, rms=0.052036Jy sigma=0.446527 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.501 mas, bmaj=2.737 mas, bpa=54.58 degrees ! Estimated noise=0.549692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018488 Jy ! Component: 100 - total flux cleaned = 0.0031191 Jy ! Component: 150 - total flux cleaned = 0.00392558 Jy ! Component: 200 - total flux cleaned = 0.00464138 Jy ! Total flux subtracted in 200 components = 0.00464138 Jy ! Clean residual min=-0.001565 max=0.001831 Jy/beam ! Clean residual mean=0.000007 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.382184 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 391 components and 0.382184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052028Jy sigma=0.446284 ! Fit after self-cal, rms=0.052021Jy sigma=0.446223 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000480534 Jy ! Component: 100 - total flux cleaned = 0.0010374 Jy ! Component: 150 - total flux cleaned = 0.00153375 Jy ! Component: 200 - total flux cleaned = 0.00188992 Jy ! Total flux subtracted in 200 components = 0.00188992 Jy ! Clean residual min=-0.001449 max=0.001630 Jy/beam ! Clean residual mean=0.000003 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.384074 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 408 components and 0.384074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052022Jy sigma=0.446189 ! Fit after self-cal, rms=0.052018Jy sigma=0.446162 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9871 mas, bmaj=1.182 mas, bpa=-12.44 degrees ! Estimated noise=0.420079 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9871 x 1.182 at -12.44 degrees (North through East) ! Clean map min=-0.0011035 max=0.11689 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7351 mas, bmaj=0.9022 mas, bpa=-14 degrees ! Estimated noise=0.920627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0832041 Jy ! Component: 100 - total flux cleaned = 0.126909 Jy ! Component: 150 - total flux cleaned = 0.15476 Jy ! Component: 200 - total flux cleaned = 0.17416 Jy ! Total flux subtracted in 200 components = 0.17416 Jy ! Clean residual min=-0.005370 max=0.011210 Jy/beam ! Clean residual mean=0.000029 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.17416 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.17416 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9871 mas, bmaj=1.182 mas, bpa=-12.44 degrees ! Estimated noise=0.420079 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313478 Jy ! Component: 100 - total flux cleaned = 0.0544521 Jy ! Component: 150 - total flux cleaned = 0.0727844 Jy ! Component: 200 - total flux cleaned = 0.0881498 Jy ! Total flux subtracted in 200 components = 0.0881498 Jy ! Clean residual min=-0.005416 max=0.009420 Jy/beam ! Clean residual mean=0.000093 rms=0.001912 Jy/beam ! Combined flux in latest and established models = 0.26231 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 91 components and 0.26231 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130929 Jy ! Component: 100 - total flux cleaned = 0.0244087 Jy ! Component: 150 - total flux cleaned = 0.0342678 Jy ! Component: 200 - total flux cleaned = 0.0428907 Jy ! Total flux subtracted in 200 components = 0.0428907 Jy ! Clean residual min=-0.003806 max=0.005392 Jy/beam ! Clean residual mean=0.000059 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.305201 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 161 components and 0.305201 Jy ! Inverting map ! Added new window around map position (-0.4, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00758015 Jy ! Component: 100 - total flux cleaned = 0.014273 Jy ! Component: 150 - total flux cleaned = 0.020207 Jy ! Component: 200 - total flux cleaned = 0.0254848 Jy ! Total flux subtracted in 200 components = 0.0254848 Jy ! Clean residual min=-0.002852 max=0.003332 Jy/beam ! Clean residual mean=0.000039 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.330686 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 223 components and 0.330686 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.501 mas, bmaj=2.737 mas, bpa=54.58 degrees ! Estimated noise=0.549692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00989133 Jy ! Component: 100 - total flux cleaned = 0.0173806 Jy ! Component: 150 - total flux cleaned = 0.0232768 Jy ! Component: 200 - total flux cleaned = 0.0280058 Jy ! Total flux subtracted in 200 components = 0.0280058 Jy ! Clean residual min=-0.003361 max=0.003334 Jy/beam ! Clean residual mean=0.000039 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.358691 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389489 Jy ! Component: 100 - total flux cleaned = 0.0071619 Jy ! Component: 150 - total flux cleaned = 0.00992594 Jy ! Component: 200 - total flux cleaned = 0.0122816 Jy ! Total flux subtracted in 200 components = 0.0122816 Jy ! Clean residual min=-0.002365 max=0.002191 Jy/beam ! Clean residual mean=0.000020 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.370973 Jy ! Adding 165 model components to the UV plane model. ! The established model now contains 344 components and 0.370973 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9871 mas, bmaj=1.182 mas, bpa=-12.44 degrees ! Estimated noise=0.420079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189014 Jy ! Component: 100 - total flux cleaned = 0.00298689 Jy ! Component: 150 - total flux cleaned = 0.00385424 Jy ! Component: 200 - total flux cleaned = 0.00477549 Jy ! Total flux subtracted in 200 components = 0.00477549 Jy ! Clean residual min=-0.001320 max=0.001404 Jy/beam ! Clean residual mean=0.000006 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.375749 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 364 components and 0.375749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052143Jy sigma=0.447509 ! Fit after self-cal, rms=0.052105Jy sigma=0.447200 wmodel J2125+6423_X_map.mod ! Writing 364 model components to file: J2125+6423_X_map.mod wobs J2125+6423_X_uvs.fits ! Writing UV FITS file: J2125+6423_X_uvs.fits wwins J2125+6423_X_map.win ! wwins: Wrote 10 windows to J2125+6423_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122405 Jy ! Component: 100 - total flux cleaned = 0.000455611 Jy ! Component: 150 - total flux cleaned = 0.000660173 Jy ! Component: 200 - total flux cleaned = 0.00083581 Jy ! Component: 250 - total flux cleaned = 0.000984904 Jy ! Component: 300 - total flux cleaned = 0.00110885 Jy ! Component: 350 - total flux cleaned = 0.00124961 Jy ! Component: 400 - total flux cleaned = 0.00124926 Jy ! Component: 450 - total flux cleaned = 0.00123027 Jy ! Component: 500 - total flux cleaned = 0.0012868 Jy ! Component: 550 - total flux cleaned = 0.00130518 Jy ! Component: 600 - total flux cleaned = 0.00134124 Jy ! Component: 650 - total flux cleaned = 0.00137685 Jy ! Component: 700 - total flux cleaned = 0.0014468 Jy ! Component: 750 - total flux cleaned = 0.00151503 Jy ! Component: 800 - total flux cleaned = 0.00148128 Jy ! Component: 850 - total flux cleaned = 0.00151488 Jy ! Component: 900 - total flux cleaned = 0.00156431 Jy ! Component: 950 - total flux cleaned = 0.00162894 Jy ! Component: 1000 - total flux cleaned = 0.00162879 Jy ! Component: 1050 - total flux cleaned = 0.00162871 Jy ! Component: 1100 - total flux cleaned = 0.00164424 Jy ! Component: 1150 - total flux cleaned = 0.00169067 Jy ! Component: 1200 - total flux cleaned = 0.00169076 Jy ! Component: 1250 - total flux cleaned = 0.00172073 Jy ! Component: 1300 - total flux cleaned = 0.00173547 Jy ! Component: 1350 - total flux cleaned = 0.0017647 Jy ! Component: 1400 - total flux cleaned = 0.00176446 Jy ! Component: 1450 - total flux cleaned = 0.00177866 Jy ! Component: 1500 - total flux cleaned = 0.00172201 Jy ! Component: 1550 - total flux cleaned = 0.00183425 Jy ! Component: 1600 - total flux cleaned = 0.00179253 Jy ! Component: 1650 - total flux cleaned = 0.00180623 Jy ! Component: 1700 - total flux cleaned = 0.00190157 Jy ! Component: 1750 - total flux cleaned = 0.00191505 Jy ! Component: 1800 - total flux cleaned = 0.00194171 Jy ! Component: 1850 - total flux cleaned = 0.00200769 Jy ! Component: 1900 - total flux cleaned = 0.00199462 Jy ! Component: 1950 - total flux cleaned = 0.00207245 Jy ! Component: 2000 - total flux cleaned = 0.00213657 Jy ! Component: 2050 - total flux cleaned = 0.00218728 Jy ! Component: 2100 - total flux cleaned = 0.00221248 Jy ! Component: 2150 - total flux cleaned = 0.00227481 Jy ! Component: 2200 - total flux cleaned = 0.00231189 Jy ! Component: 2250 - total flux cleaned = 0.00233644 Jy ! Component: 2300 - total flux cleaned = 0.00238506 Jy ! Component: 2350 - total flux cleaned = 0.00240919 Jy ! Component: 2400 - total flux cleaned = 0.0024687 Jy ! Component: 2450 - total flux cleaned = 0.00251615 Jy ! Component: 2500 - total flux cleaned = 0.00257487 Jy ! Component: 2550 - total flux cleaned = 0.00260982 Jy ! Component: 2600 - total flux cleaned = 0.00265597 Jy ! Component: 2650 - total flux cleaned = 0.00271332 Jy ! Component: 2700 - total flux cleaned = 0.0027589 Jy ! Component: 2750 - total flux cleaned = 0.00279279 Jy ! Component: 2800 - total flux cleaned = 0.00285995 Jy ! Component: 2850 - total flux cleaned = 0.0028599 Jy ! Component: 2900 - total flux cleaned = 0.0029261 Jy ! Component: 2950 - total flux cleaned = 0.00292621 Jy ! Component: 3000 - total flux cleaned = 0.00293707 Jy ! Component: 3050 - total flux cleaned = 0.00294794 Jy ! Component: 3100 - total flux cleaned = 0.00304441 Jy ! Component: 3150 - total flux cleaned = 0.00305499 Jy ! Component: 3200 - total flux cleaned = 0.003076 Jy ! Component: 3250 - total flux cleaned = 0.0030759 Jy ! Component: 3300 - total flux cleaned = 0.00307599 Jy ! Component: 3350 - total flux cleaned = 0.00311729 Jy ! Component: 3400 - total flux cleaned = 0.00311723 Jy ! Component: 3450 - total flux cleaned = 0.00313756 Jy ! Component: 3500 - total flux cleaned = 0.00313757 Jy ! Component: 3550 - total flux cleaned = 0.00320806 Jy ! Component: 3600 - total flux cleaned = 0.00325793 Jy ! Component: 3650 - total flux cleaned = 0.00329764 Jy ! Component: 3700 - total flux cleaned = 0.00331745 Jy ! Component: 3750 - total flux cleaned = 0.00338617 Jy ! Component: 3800 - total flux cleaned = 0.00337631 Jy ! Component: 3850 - total flux cleaned = 0.00339558 Jy ! Component: 3900 - total flux cleaned = 0.0034245 Jy ! Component: 3950 - total flux cleaned = 0.00343406 Jy ! Component: 4000 - total flux cleaned = 0.00347206 Jy ! Component: 4050 - total flux cleaned = 0.00346264 Jy ! Total flux subtracted in 4096 components = 0.00350962 Jy ! Clean residual min=-0.000561 max=0.000561 Jy/beam ! Clean residual mean=0.000001 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.379258 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 688 components and 0.379258 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2125+6423_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9871 x 1.182 at -12.44 degrees (North through East) ! Clean map min=-0.0010364 max=0.1177 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2125+6423_X_map.fits wmodel /image_prod/ug002_uva//J2125+6423_X_map.mod ! Writing 688 model components to file: /image_prod/ug002_uva//J2125+6423_X_map.mod wobs /image_prod/ug002_uva//J2125+6423_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2125+6423_X_uvs.fits wwins /image_prod/ug002_uva//J2125+6423_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J2125+6423_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.117698 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159579 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.40675 0.40675 0.813501 1.627 3.254 6.508 13.016 26.032 52.064 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.117 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 737.553 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2125+6423_X_dfm.log closed on Thu Mar 5 05:13:44 2020