! Started logfile: /image_prod/ug002_uva//J2123+1007_X_dfm.log on Thu Mar 5 05:12:06 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2123+1007_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2123+1007_X_uva.fits ! AN table 1: 90 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.844753 visibilities/baseline/integration-bin. ! Found source: J2123+1007 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 32844 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2123+1007_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009986Jy sigma=9.050774 ! Fit after self-cal, rms=0.890171Jy sigma=7.958433 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7074 mas, bmaj=1.658 mas, bpa=-0.7192 degrees ! Estimated noise=0.995667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0848391 Jy ! Component: 100 - total flux cleaned = 0.104608 Jy ! Total flux subtracted in 100 components = 0.104608 Jy ! Clean residual min=-0.007686 max=0.017426 Jy/beam ! Clean residual mean=0.000039 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 0.104608 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.104608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076432Jy sigma=0.694050 ! Fit after self-cal, rms=0.076396Jy sigma=0.693596 ! Inverting map ! Added new window around map position (8.4, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179354 Jy ! Component: 100 - total flux cleaned = 0.0295329 Jy ! Total flux subtracted in 100 components = 0.0295329 Jy ! Clean residual min=-0.006969 max=0.012015 Jy/beam ! Clean residual mean=0.000031 rms=0.001888 Jy/beam ! Combined flux in latest and established models = 0.13414 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 29 components and 0.13414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069371Jy sigma=0.618377 ! Fit after self-cal, rms=0.069003Jy sigma=0.615679 ! Inverting map ! Added new window around map position (9.8, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130073 Jy ! Component: 100 - total flux cleaned = 0.0221859 Jy ! Total flux subtracted in 100 components = 0.0221859 Jy ! Clean residual min=-0.006644 max=0.007960 Jy/beam ! Clean residual mean=0.000027 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.156326 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 45 components and 0.156326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064479Jy sigma=0.565425 ! Fit after self-cal, rms=0.064124Jy sigma=0.562739 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8957 mas, bmaj=1.974 mas, bpa=-0.1147 degrees ! Estimated noise=0.447675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.6, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191734 Jy ! Component: 100 - total flux cleaned = 0.032427 Jy ! Component: 150 - total flux cleaned = 0.0429279 Jy ! Component: 200 - total flux cleaned = 0.051481 Jy ! Total flux subtracted in 200 components = 0.051481 Jy ! Clean residual min=-0.005624 max=0.007246 Jy/beam ! Clean residual mean=0.000051 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 0.207807 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 98 components and 0.207807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057012Jy sigma=0.481748 ! Fit after self-cal, rms=0.056340Jy sigma=0.475222 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8957 x 1.974 at -0.1147 degrees (North through East) ! Clean map min=-0.0048152 max=0.11466 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.01 KP 1.00 ! LA 0.94 MK 1.06 OV 0.95 PT 0.85 ! SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.99 KP 0.99 ! LA 0.94 MK 1.10 OV 0.95 PT 0.84 ! SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.00 KP 1.00 ! LA 0.96 MK 1.09 OV 0.96 PT 0.84 ! SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.97 KP 1.01 ! LA 0.97 MK 1.10 OV 0.95 PT 0.84 ! SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.97 KP 1.02 ! LA 0.95 MK 1.05 OV 0.94 PT 0.87 ! SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.98 KP 1.00 ! LA 0.95 MK 1.12 OV 0.94 PT 0.85 ! SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.96 KP 1.03 ! LA 0.95 MK 1.09 OV 0.92 PT 0.86 ! SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.97 KP 1.02 ! LA 0.95 MK 1.07 OV 0.95 PT 0.84 ! SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.94 KP 1.02 ! LA 0.95 MK 1.09 OV 0.96 PT 0.84 ! SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.95 KP 0.98 ! LA 0.94 MK 1.07 OV 0.97 PT 0.86 ! SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.94 KP 0.99 ! LA 0.97 MK 1.07 OV 0.95 PT 0.84 ! SC 1.08 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.94 KP 1.00 ! LA 0.94 MK 1.06 OV 0.95 PT 0.85 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.056340Jy sigma=0.475222 ! Fit after self-cal, rms=0.052420Jy sigma=0.457225 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9261 mas, bmaj=2.026 mas, bpa=-0.06576 degrees ! Estimated noise=0.422379 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.4, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0068577 Jy ! Component: 100 - total flux cleaned = 0.0100457 Jy ! Component: 150 - total flux cleaned = 0.0122488 Jy ! Component: 200 - total flux cleaned = 0.013927 Jy ! Total flux subtracted in 200 components = 0.013927 Jy ! Clean residual min=-0.002839 max=0.004147 Jy/beam ! Clean residual mean=0.000007 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.221734 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 141 components and 0.221734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051503Jy sigma=0.443258 ! Fit after self-cal, rms=0.051430Jy sigma=0.442039 ! Inverting map ! Added new window around map position (-0.2, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392645 Jy ! Component: 100 - total flux cleaned = 0.00608872 Jy ! Component: 150 - total flux cleaned = 0.00749852 Jy ! Component: 200 - total flux cleaned = 0.00853547 Jy ! Total flux subtracted in 200 components = 0.00853547 Jy ! Clean residual min=-0.002205 max=0.002961 Jy/beam ! Clean residual mean=0.000003 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.23027 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 168 components and 0.23027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051086Jy sigma=0.437100 ! Fit after self-cal, rms=0.051057Jy sigma=0.436855 ! Inverting map ! Added new window around map position (-1.8, 13.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267684 Jy ! Component: 100 - total flux cleaned = 0.00403912 Jy ! Component: 150 - total flux cleaned = 0.00490058 Jy ! Component: 200 - total flux cleaned = 0.00555145 Jy ! Total flux subtracted in 200 components = 0.00555145 Jy ! Clean residual min=-0.001921 max=0.002195 Jy/beam ! Clean residual mean=0.000002 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.235821 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 178 components and 0.235821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050895Jy sigma=0.434692 ! Fit after self-cal, rms=0.050888Jy sigma=0.434583 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050888Jy sigma=0.434583 ! Fit after self-cal, rms=0.050933Jy sigma=0.433002 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.926 mas, bmaj=2.026 mas, bpa=0.07136 degrees ! Estimated noise=0.42322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148651 Jy ! Component: 100 - total flux cleaned = 0.00207951 Jy ! Component: 150 - total flux cleaned = 0.00242851 Jy ! Component: 200 - total flux cleaned = 0.00278194 Jy ! Total flux subtracted in 200 components = 0.00278194 Jy ! Clean residual min=-0.001514 max=0.002022 Jy/beam ! Clean residual mean=0.000004 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.238603 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 194 components and 0.238603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050861Jy sigma=0.432094 ! Fit after self-cal, rms=0.050862Jy sigma=0.432046 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.6, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125703 Jy ! Component: 100 - total flux cleaned = 0.00163914 Jy ! Component: 150 - total flux cleaned = 0.00184292 Jy ! Component: 200 - total flux cleaned = 0.00195054 Jy ! Total flux subtracted in 200 components = 0.00195054 Jy ! Clean residual min=-0.001328 max=0.001484 Jy/beam ! Clean residual mean=0.000003 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.240554 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 208 components and 0.240554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050768Jy sigma=0.431116 ! Fit after self-cal, rms=0.050763Jy sigma=0.431082 ! Inverting map ! Added new window around map position (-20.4, 10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106167 Jy ! Component: 100 - total flux cleaned = 0.00122998 Jy ! Component: 150 - total flux cleaned = 0.00141016 Jy ! Component: 200 - total flux cleaned = 0.00152189 Jy ! Total flux subtracted in 200 components = 0.00152189 Jy ! Clean residual min=-0.001187 max=0.001358 Jy/beam ! Clean residual mean=0.000002 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.242076 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 225 components and 0.242076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050714Jy sigma=0.430619 ! Fit after self-cal, rms=0.050713Jy sigma=0.430600 ! Inverting map ! Added new window around map position (-10, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102003 Jy ! Component: 100 - total flux cleaned = 0.00141013 Jy ! Component: 150 - total flux cleaned = 0.00162742 Jy ! Component: 200 - total flux cleaned = 0.0017555 Jy ! Total flux subtracted in 200 components = 0.0017555 Jy ! Clean residual min=-0.001121 max=0.001099 Jy/beam ! Clean residual mean=0.000000 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.243831 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 243 components and 0.243831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050672Jy sigma=0.430225 ! Fit after self-cal, rms=0.050670Jy sigma=0.430205 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050670Jy sigma=0.430205 ! Fit after self-cal, rms=0.050633Jy sigma=0.430087 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.926 mas, bmaj=2.026 mas, bpa=0.1154 degrees ! Estimated noise=0.423312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000458613 Jy ! Component: 100 - total flux cleaned = 0.000819456 Jy ! Component: 150 - total flux cleaned = 0.00104633 Jy ! Component: 200 - total flux cleaned = 0.00123638 Jy ! Total flux subtracted in 200 components = 0.00123638 Jy ! Clean residual min=-0.001103 max=0.001025 Jy/beam ! Clean residual mean=0.000001 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.245068 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 259 components and 0.245068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050607Jy sigma=0.429839 ! Fit after self-cal, rms=0.050605Jy sigma=0.429832 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014394 Jy ! Component: 100 - total flux cleaned = 0.000209862 Jy ! Component: 150 - total flux cleaned = 0.000315871 Jy ! Component: 200 - total flux cleaned = 0.000396689 Jy ! Total flux subtracted in 200 components = 0.000396689 Jy ! Clean residual min=-0.001069 max=0.001009 Jy/beam ! Clean residual mean=0.000001 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.245464 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 268 components and 0.245464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050587Jy sigma=0.429685 ! Fit after self-cal, rms=0.050586Jy sigma=0.429683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050586Jy sigma=0.429683 ! Fit after self-cal, rms=0.050586Jy sigma=0.429665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.382 mas, bmaj=3.158 mas, bpa=12.06 degrees ! Estimated noise=0.499858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853391 Jy ! Component: 100 - total flux cleaned = 0.00109398 Jy ! Component: 150 - total flux cleaned = 0.00123474 Jy ! Component: 200 - total flux cleaned = 0.00131877 Jy ! Total flux subtracted in 200 components = 0.00131877 Jy ! Clean residual min=-0.001085 max=0.001148 Jy/beam ! Clean residual mean=0.000001 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.246783 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 285 components and 0.246783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050578Jy sigma=0.429525 ! Fit after self-cal, rms=0.050577Jy sigma=0.429514 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.77099e-05 Jy ! Component: 100 - total flux cleaned = 0.000104881 Jy ! Component: 150 - total flux cleaned = 0.000122296 Jy ! Component: 200 - total flux cleaned = 0.000105449 Jy ! Total flux subtracted in 200 components = 0.000105449 Jy ! Clean residual min=-0.001043 max=0.001119 Jy/beam ! Clean residual mean=0.000001 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.246888 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 296 components and 0.246888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050573Jy sigma=0.429453 ! Fit after self-cal, rms=0.050572Jy sigma=0.429450 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9262 mas, bmaj=2.026 mas, bpa=0.1239 degrees ! Estimated noise=0.423337 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9262 x 2.026 at 0.1239 degrees (North through East) ! Clean map min=-0.001356 max=0.10879 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.727 mas, bmaj=1.691 mas, bpa=-0.361 degrees ! Estimated noise=0.966662 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.082013 Jy ! Component: 100 - total flux cleaned = 0.106413 Jy ! Component: 150 - total flux cleaned = 0.122883 Jy ! Component: 200 - total flux cleaned = 0.135704 Jy ! Total flux subtracted in 200 components = 0.135704 Jy ! Clean residual min=-0.004869 max=0.008143 Jy/beam ! Clean residual mean=0.000026 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.135704 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.135704 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9262 mas, bmaj=2.026 mas, bpa=0.1239 degrees ! Estimated noise=0.423337 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201326 Jy ! Component: 100 - total flux cleaned = 0.0344817 Jy ! Component: 150 - total flux cleaned = 0.0457042 Jy ! Component: 200 - total flux cleaned = 0.0547028 Jy ! Total flux subtracted in 200 components = 0.0547028 Jy ! Clean residual min=-0.003664 max=0.005589 Jy/beam ! Clean residual mean=0.000037 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.190407 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 104 components and 0.190407 Jy ! Inverting map ! Added new window around map position (7.6, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00737074 Jy ! Component: 100 - total flux cleaned = 0.0134481 Jy ! Component: 150 - total flux cleaned = 0.0185205 Jy ! Component: 200 - total flux cleaned = 0.0228286 Jy ! Total flux subtracted in 200 components = 0.0228286 Jy ! Clean residual min=-0.002471 max=0.003226 Jy/beam ! Clean residual mean=0.000021 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.213235 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 143 components and 0.213235 Jy ! Inverting map ! Added new window around map position (1, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038445 Jy ! Component: 100 - total flux cleaned = 0.00713851 Jy ! Component: 150 - total flux cleaned = 0.0100315 Jy ! Component: 200 - total flux cleaned = 0.0125997 Jy ! Total flux subtracted in 200 components = 0.0125997 Jy ! Clean residual min=-0.001952 max=0.002340 Jy/beam ! Clean residual mean=0.000013 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.225835 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 173 components and 0.225835 Jy ! Inverting map ! Added new window around map position (13.2, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248071 Jy ! Component: 100 - total flux cleaned = 0.004562 Jy ! Component: 150 - total flux cleaned = 0.00643373 Jy ! Component: 200 - total flux cleaned = 0.00812611 Jy ! Total flux subtracted in 200 components = 0.00812611 Jy ! Clean residual min=-0.001570 max=0.001467 Jy/beam ! Clean residual mean=0.000008 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.233961 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 207 components and 0.233961 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.382 mas, bmaj=3.158 mas, bpa=12.06 degrees ! Estimated noise=0.499858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263888 Jy ! Component: 100 - total flux cleaned = 0.00472671 Jy ! Component: 150 - total flux cleaned = 0.00644984 Jy ! Component: 200 - total flux cleaned = 0.00789426 Jy ! Total flux subtracted in 200 components = 0.00789426 Jy ! Clean residual min=-0.001579 max=0.001315 Jy/beam ! Clean residual mean=0.000007 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.241855 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122683 Jy ! Component: 100 - total flux cleaned = 0.00215327 Jy ! Component: 150 - total flux cleaned = 0.0027441 Jy ! Component: 200 - total flux cleaned = 0.00310946 Jy ! Total flux subtracted in 200 components = 0.00310946 Jy ! Clean residual min=-0.001301 max=0.001092 Jy/beam ! Clean residual mean=0.000002 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.244965 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 274 components and 0.244965 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9262 mas, bmaj=2.026 mas, bpa=0.1239 degrees ! Estimated noise=0.423337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258493 Jy ! Component: 100 - total flux cleaned = -1.60377e-05 Jy ! Component: 150 - total flux cleaned = 0.000294315 Jy ! Component: 200 - total flux cleaned = 0.000522086 Jy ! Total flux subtracted in 200 components = 0.000522086 Jy ! Clean residual min=-0.001055 max=0.000947 Jy/beam ! Clean residual mean=0.000001 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.245487 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 301 components and 0.245487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050565Jy sigma=0.429615 ! Fit after self-cal, rms=0.050541Jy sigma=0.429466 wmodel J2123+1007_X_map.mod ! Writing 301 model components to file: J2123+1007_X_map.mod wobs J2123+1007_X_uvs.fits ! Writing UV FITS file: J2123+1007_X_uvs.fits wwins J2123+1007_X_map.win ! wwins: Wrote 13 windows to J2123+1007_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245794 Jy ! Component: 100 - total flux cleaned = -0.000295649 Jy ! Component: 150 - total flux cleaned = -0.000310204 Jy ! Component: 200 - total flux cleaned = -0.000309732 Jy ! Component: 250 - total flux cleaned = -0.000310063 Jy ! Component: 300 - total flux cleaned = -0.000310075 Jy ! Component: 350 - total flux cleaned = -0.000309941 Jy ! Component: 400 - total flux cleaned = -0.000310192 Jy ! Component: 450 - total flux cleaned = -0.00031041 Jy ! Component: 500 - total flux cleaned = -0.000234952 Jy ! Component: 550 - total flux cleaned = -0.000197983 Jy ! Component: 600 - total flux cleaned = -0.000149895 Jy ! Component: 650 - total flux cleaned = -0.000114554 Jy ! Component: 700 - total flux cleaned = -7.94286e-05 Jy ! Component: 750 - total flux cleaned = -3.34946e-05 Jy ! Component: 800 - total flux cleaned = 2.29675e-05 Jy ! Component: 850 - total flux cleaned = 3.42036e-05 Jy ! Component: 900 - total flux cleaned = 8.88644e-05 Jy ! Component: 950 - total flux cleaned = 0.000131943 Jy ! Component: 1000 - total flux cleaned = 0.000184975 Jy ! Component: 1050 - total flux cleaned = 0.000237146 Jy ! Component: 1100 - total flux cleaned = 0.000268106 Jy ! Component: 1150 - total flux cleaned = 0.000359666 Jy ! Component: 1200 - total flux cleaned = 0.000379704 Jy ! Component: 1250 - total flux cleaned = 0.000439291 Jy ! Component: 1300 - total flux cleaned = 0.000488367 Jy ! Component: 1350 - total flux cleaned = 0.000517477 Jy ! Component: 1400 - total flux cleaned = 0.000584463 Jy ! Component: 1450 - total flux cleaned = 0.000622304 Jy ! Component: 1500 - total flux cleaned = 0.000659789 Jy ! Component: 1550 - total flux cleaned = 0.000687489 Jy ! Component: 1600 - total flux cleaned = 0.000723965 Jy ! Component: 1650 - total flux cleaned = 0.000732897 Jy ! Component: 1700 - total flux cleaned = 0.00073285 Jy ! Component: 1750 - total flux cleaned = 0.000777143 Jy ! Component: 1800 - total flux cleaned = 0.000785901 Jy ! Component: 1850 - total flux cleaned = 0.00081196 Jy ! Component: 1900 - total flux cleaned = 0.000837781 Jy ! Component: 1950 - total flux cleaned = 0.000846393 Jy ! Component: 2000 - total flux cleaned = 0.000897031 Jy ! Component: 2050 - total flux cleaned = 0.000905408 Jy ! Component: 2100 - total flux cleaned = 0.000930384 Jy ! Component: 2150 - total flux cleaned = 0.000971483 Jy ! Component: 2200 - total flux cleaned = 0.00100394 Jy ! Component: 2250 - total flux cleaned = 0.0010281 Jy ! Component: 2300 - total flux cleaned = 0.00104404 Jy ! Component: 2350 - total flux cleaned = 0.0010837 Jy ! Component: 2400 - total flux cleaned = 0.00106798 Jy ! Component: 2450 - total flux cleaned = 0.00109146 Jy ! Component: 2500 - total flux cleaned = 0.00112253 Jy ! Component: 2550 - total flux cleaned = 0.00113793 Jy ! Component: 2600 - total flux cleaned = 0.00116845 Jy ! Component: 2650 - total flux cleaned = 0.00116088 Jy ! Component: 2700 - total flux cleaned = 0.00117603 Jy ! Component: 2750 - total flux cleaned = 0.00119098 Jy ! Component: 2800 - total flux cleaned = 0.0012356 Jy ! Component: 2850 - total flux cleaned = 0.00123556 Jy ! Component: 2900 - total flux cleaned = 0.00125024 Jy ! Component: 2950 - total flux cleaned = 0.00127936 Jy ! Component: 3000 - total flux cleaned = 0.00128655 Jy ! Component: 3050 - total flux cleaned = 0.00130089 Jy ! Component: 3100 - total flux cleaned = 0.00131519 Jy ! Component: 3150 - total flux cleaned = 0.00133643 Jy ! Component: 3200 - total flux cleaned = 0.00135756 Jy ! Component: 3250 - total flux cleaned = 0.00136459 Jy ! Component: 3300 - total flux cleaned = 0.00135757 Jy ! Component: 3350 - total flux cleaned = 0.00136454 Jy ! Component: 3400 - total flux cleaned = 0.00135078 Jy ! Component: 3450 - total flux cleaned = 0.00139181 Jy ! Component: 3500 - total flux cleaned = 0.00141211 Jy ! Component: 3550 - total flux cleaned = 0.00142559 Jy ! Component: 3600 - total flux cleaned = 0.00141889 Jy ! Component: 3650 - total flux cleaned = 0.00142556 Jy ! Component: 3700 - total flux cleaned = 0.00145873 Jy ! Component: 3750 - total flux cleaned = 0.00146532 Jy ! Component: 3800 - total flux cleaned = 0.00146529 Jy ! Component: 3850 - total flux cleaned = 0.00149789 Jy ! Component: 3900 - total flux cleaned = 0.00151726 Jy ! Component: 3950 - total flux cleaned = 0.00151725 Jy ! Component: 4000 - total flux cleaned = 0.00152368 Jy ! Component: 4050 - total flux cleaned = 0.00154916 Jy ! Total flux subtracted in 4096 components = 0.0015682 Jy ! Clean residual min=-0.000348 max=0.000363 Jy/beam ! Clean residual mean=-0.000000 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.247055 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 593 components and 0.247055 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2123+1007_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9262 x 2.026 at 0.1239 degrees (North through East) ! Clean map min=-0.000741 max=0.10777 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2123+1007_X_map.fits wmodel /image_prod/ug002_uva//J2123+1007_X_map.mod ! Writing 593 model components to file: /image_prod/ug002_uva//J2123+1007_X_map.mod wobs /image_prod/ug002_uva//J2123+1007_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2123+1007_X_uvs.fits wwins /image_prod/ug002_uva//J2123+1007_X_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J2123+1007_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.107768 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00010781 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.300118 0.300118 0.600236 1.20047 2.40094 4.80189 9.60377 19.2075 38.4151 76.8302 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.107 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 999.607 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2123+1007_X_dfm.log closed on Thu Mar 5 05:12:12 2020