! Started logfile: /image_prod/ug002_uva//J2118+2034_S_dfm.log on Thu Mar  5 05:09:31 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2118+2034_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2118+2034_S_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.908642 visibilities/baseline/integration-bin.
! Found source: J2118+2034
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2118+2034_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011227Jy  sigma=8.891922
! Fit after  self-cal, rms=0.867031Jy  sigma=7.459193
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.135 mas, bmaj=7.373 mas, bpa=5.588 degrees
! Estimated noise=1.40189 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10789 Jy
! Component: 100  -  total flux cleaned = 0.153016 Jy
! Total flux subtracted in 100 components = 0.153016 Jy
! Clean residual min=-0.010816 max=0.032993 Jy/beam
! Clean residual mean=-0.000060 rms=0.003151 Jy/beam
! Combined flux in latest and established models = 0.153016 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.153016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079957Jy  sigma=0.675757
! Fit after  self-cal, rms=0.078666Jy  sigma=0.669329
! Inverting map 
! Added new window around map position (-4.5, 3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0323601 Jy
! Component: 100  -  total flux cleaned = 0.0497794 Jy
! Total flux subtracted in 100 components = 0.0497794 Jy
! Clean residual min=-0.006279 max=0.012511 Jy/beam
! Clean residual mean=-0.000024 rms=0.001725 Jy/beam
! Combined flux in latest and established models = 0.202795 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 30 components and 0.202795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064196Jy  sigma=0.513527
! Fit after  self-cal, rms=0.062923Jy  sigma=0.504107
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132431 Jy
! Component: 100  -  total flux cleaned = 0.0205202 Jy
! Total flux subtracted in 100 components = 0.0205202 Jy
! Clean residual min=-0.005188 max=0.005967 Jy/beam
! Clean residual mean=-0.000009 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.223316 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 35 components and 0.223316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060281Jy  sigma=0.473834
! Fit after  self-cal, rms=0.060070Jy  sigma=0.472137
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.753 mas, bmaj=8.271 mas, bpa=4.74 degrees
! Estimated noise=1.11754 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00550322 Jy
! Component: 100  -  total flux cleaned = 0.00835681 Jy
! Component: 150  -  total flux cleaned = 0.00934357 Jy
! Component: 200  -  total flux cleaned = 0.00961978 Jy
! Total flux subtracted in 200 components = 0.00961978 Jy
! Clean residual min=-0.003744 max=0.003581 Jy/beam
! Clean residual mean=-0.000003 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.232935 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 52 components and 0.232935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059564Jy  sigma=0.466823
! Fit after  self-cal, rms=0.059497Jy  sigma=0.466345
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.753 x 8.271 at 4.74 degrees (North through East)
! Clean map  min=-0.0033191  max=0.12844 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.02     KP        0.99     
!   LA        1.01     MK        1.03     NL        0.99     OV        1.04     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        1.00     KP        1.00     
!   LA        1.01     MK        1.00     NL        1.14     OV        0.94     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        1.00     KP        1.00     
!   LA        1.01     MK        0.98     NL        0.88     OV        0.99     
!   PT        1.00     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.059497Jy  sigma=0.466345
! Fit after  self-cal, rms=0.059325Jy  sigma=0.457175
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.737 mas, bmaj=8.283 mas, bpa=4.97 degrees
! Estimated noise=1.11387 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000449813 Jy
! Component: 100  -  total flux cleaned = 0.000383486 Jy
! Component: 150  -  total flux cleaned = 0.000218136 Jy
! Component: 200  -  total flux cleaned = 6.84055e-05 Jy
! Total flux subtracted in 200 components = 6.84055e-05 Jy
! Clean residual min=-0.003984 max=0.003139 Jy/beam
! Clean residual mean=0.000000 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.233004 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 61 components and 0.233004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059153Jy  sigma=0.456397
! Fit after  self-cal, rms=0.059175Jy  sigma=0.456216
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059175Jy  sigma=0.456216
! Fit after  self-cal, rms=0.061937Jy  sigma=0.443397
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.747 mas, bmaj=8.209 mas, bpa=5.348 degrees
! Estimated noise=1.11667 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000303431 Jy
! Component: 100  -  total flux cleaned = -0.000306507 Jy
! Component: 150  -  total flux cleaned = -0.000306641 Jy
! Component: 200  -  total flux cleaned = -0.000307732 Jy
! Total flux subtracted in 200 components = -0.000307732 Jy
! Clean residual min=-0.002775 max=0.002456 Jy/beam
! Clean residual mean=-0.000004 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.232696 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 65 components and 0.232696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061865Jy  sigma=0.442900
! Fit after  self-cal, rms=0.061877Jy  sigma=0.442755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.25054e-05 Jy
! Component: 100  -  total flux cleaned = 2.12744e-05 Jy
! Component: 150  -  total flux cleaned = 8.60986e-05 Jy
! Component: 200  -  total flux cleaned = 8.55658e-05 Jy
! Total flux subtracted in 200 components = 8.55658e-05 Jy
! Clean residual min=-0.002702 max=0.002392 Jy/beam
! Clean residual mean=-0.000003 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.232782 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 70 components and 0.232782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061828Jy  sigma=0.442409
! Fit after  self-cal, rms=0.061818Jy  sigma=0.442332
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061818Jy  sigma=0.442332
! Fit after  self-cal, rms=0.061927Jy  sigma=0.442282
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.745 mas, bmaj=8.205 mas, bpa=5.234 degrees
! Estimated noise=1.11576 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000231616 Jy
! Component: 100  -  total flux cleaned = -0.000103932 Jy
! Component: 150  -  total flux cleaned = -0.00010332 Jy
! Component: 200  -  total flux cleaned = -7.55226e-05 Jy
! Total flux subtracted in 200 components = -7.55226e-05 Jy
! Clean residual min=-0.002578 max=0.002377 Jy/beam
! Clean residual mean=-0.000003 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.232706 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 72 components and 0.232706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061886Jy  sigma=0.442000
! Fit after  self-cal, rms=0.061878Jy  sigma=0.441939
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.98338e-05 Jy
! Component: 100  -  total flux cleaned = 1.90779e-05 Jy
! Component: 150  -  total flux cleaned = 4.46576e-05 Jy
! Component: 200  -  total flux cleaned = 6.91145e-05 Jy
! Total flux subtracted in 200 components = 6.91145e-05 Jy
! Clean residual min=-0.002506 max=0.002348 Jy/beam
! Clean residual mean=-0.000003 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.232775 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 73 components and 0.232775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061847Jy  sigma=0.441725
! Fit after  self-cal, rms=0.061841Jy  sigma=0.441678
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061841Jy  sigma=0.441678
! Fit after  self-cal, rms=0.061864Jy  sigma=0.441664
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.679 mas, bmaj=11.08 mas, bpa=-3.889 degrees
! Estimated noise=1.28739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271553 Jy
! Component: 100  -  total flux cleaned = 0.000373055 Jy
! Component: 150  -  total flux cleaned = 0.000444363 Jy
! Component: 200  -  total flux cleaned = 0.000484328 Jy
! Total flux subtracted in 200 components = 0.000484328 Jy
! Clean residual min=-0.002230 max=0.002010 Jy/beam
! Clean residual mean=-0.000005 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.233259 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.233259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061852Jy  sigma=0.441540
! Fit after  self-cal, rms=0.061845Jy  sigma=0.441466
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.71991e-05 Jy
! Component: 100  -  total flux cleaned = 4.74975e-05 Jy
! Component: 150  -  total flux cleaned = 0.000106189 Jy
! Component: 200  -  total flux cleaned = 0.000128661 Jy
! Total flux subtracted in 200 components = 0.000128661 Jy
! Clean residual min=-0.002162 max=0.001953 Jy/beam
! Clean residual mean=-0.000004 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.233388 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 91 components and 0.233388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061836Jy  sigma=0.441384
! Fit after  self-cal, rms=0.061829Jy  sigma=0.441331
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.746 mas, bmaj=8.204 mas, bpa=5.117 degrees
! Estimated noise=1.11556 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.746 x 8.204 at 5.117 degrees (North through East)
! Clean map  min=-0.0022985  max=0.12669 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.13 mas, bmaj=7.307 mas, bpa=6.011 degrees
! Estimated noise=1.3901 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108743 Jy
! Component: 100  -  total flux cleaned = 0.160128 Jy
! Component: 150  -  total flux cleaned = 0.188211 Jy
! Component: 200  -  total flux cleaned = 0.204175 Jy
! Total flux subtracted in 200 components = 0.204175 Jy
! Clean residual min=-0.003832 max=0.008035 Jy/beam
! Clean residual mean=-0.000024 rms=0.001073 Jy/beam
! Combined flux in latest and established models = 0.204175 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.204175 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.746 mas, bmaj=8.204 mas, bpa=5.117 degrees
! Estimated noise=1.11556 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119164 Jy
! Component: 100  -  total flux cleaned = 0.0184909 Jy
! Component: 150  -  total flux cleaned = 0.0222986 Jy
! Component: 200  -  total flux cleaned = 0.0247085 Jy
! Total flux subtracted in 200 components = 0.0247085 Jy
! Clean residual min=-0.002277 max=0.002493 Jy/beam
! Clean residual mean=-0.000006 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.228883 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 50 components and 0.228883 Jy
! Inverting map 
! Added new window around map position (-11.5, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00221127 Jy
! Component: 100  -  total flux cleaned = 0.00321609 Jy
! Component: 150  -  total flux cleaned = 0.00382764 Jy
! Component: 200  -  total flux cleaned = 0.00412484 Jy
! Total flux subtracted in 200 components = 0.00412484 Jy
! Clean residual min=-0.002122 max=0.001803 Jy/beam
! Clean residual mean=-0.000004 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.233008 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 73 components and 0.233008 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.679 mas, bmaj=11.08 mas, bpa=-3.889 degrees
! Estimated noise=1.28739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000907272 Jy
! Component: 100  -  total flux cleaned = 0.00120143 Jy
! Component: 150  -  total flux cleaned = 0.00134065 Jy
! Component: 200  -  total flux cleaned = 0.00142317 Jy
! Total flux subtracted in 200 components = 0.00142317 Jy
! Clean residual min=-0.001926 max=0.001776 Jy/beam
! Clean residual mean=-0.000004 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.234431 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.87147e-07 Jy
! Component: 100  -  total flux cleaned = 8.25923e-07 Jy
! Component: 150  -  total flux cleaned = 6.58842e-07 Jy
! Component: 200  -  total flux cleaned = 3.14053e-07 Jy
! Total flux subtracted in 200 components = 3.14053e-07 Jy
! Clean residual min=-0.001914 max=0.001758 Jy/beam
! Clean residual mean=-0.000004 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.234431 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 96 components and 0.234431 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.746 mas, bmaj=8.204 mas, bpa=5.117 degrees
! Estimated noise=1.11556 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000490429 Jy
! Component: 100  -  total flux cleaned = -0.000516786 Jy
! Component: 150  -  total flux cleaned = -0.000516279 Jy
! Component: 200  -  total flux cleaned = -0.000516347 Jy
! Total flux subtracted in 200 components = -0.000516347 Jy
! Clean residual min=-0.002028 max=0.001758 Jy/beam
! Clean residual mean=-0.000003 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.233915 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 113 components and 0.233915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061642Jy  sigma=0.440238
! Fit after  self-cal, rms=0.061630Jy  sigma=0.440029
wmodel J2118+2034_S_map.mod
! Writing 113 model components to file: J2118+2034_S_map.mod
wobs   J2118+2034_S_uvs.fits
! Writing UV FITS file: J2118+2034_S_uvs.fits
wwins  J2118+2034_S_map.win
! wwins: Wrote 3 windows to J2118+2034_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000766553 Jy
! Component: 100  -  total flux cleaned = -0.00105756 Jy
! Component: 150  -  total flux cleaned = -0.00118003 Jy
! Component: 200  -  total flux cleaned = -0.00123822 Jy
! Component: 250  -  total flux cleaned = -0.00121 Jy
! Component: 300  -  total flux cleaned = -0.00131925 Jy
! Component: 350  -  total flux cleaned = -0.00145207 Jy
! Component: 400  -  total flux cleaned = -0.00152983 Jy
! Component: 450  -  total flux cleaned = -0.00165747 Jy
! Component: 500  -  total flux cleaned = -0.00178317 Jy
! Component: 550  -  total flux cleaned = -0.00195567 Jy
! Component: 600  -  total flux cleaned = -0.00210067 Jy
! Component: 650  -  total flux cleaned = -0.0022668 Jy
! Component: 700  -  total flux cleaned = -0.00236058 Jy
! Component: 750  -  total flux cleaned = -0.00254521 Jy
! Component: 800  -  total flux cleaned = -0.00272665 Jy
! Component: 850  -  total flux cleaned = -0.00286065 Jy
! Component: 900  -  total flux cleaned = -0.00299352 Jy
! Component: 950  -  total flux cleaned = -0.00318933 Jy
! Component: 1000  -  total flux cleaned = -0.00333959 Jy
! Component: 1050  -  total flux cleaned = -0.00342436 Jy
! Component: 1100  -  total flux cleaned = -0.00357052 Jy
! Component: 1150  -  total flux cleaned = -0.00371501 Jy
! Component: 1200  -  total flux cleaned = -0.00385732 Jy
! Component: 1250  -  total flux cleaned = -0.00397797 Jy
! Component: 1300  -  total flux cleaned = -0.00403762 Jy
! Component: 1350  -  total flux cleaned = -0.00421437 Jy
! Component: 1400  -  total flux cleaned = -0.0043116 Jy
! Component: 1450  -  total flux cleaned = -0.00436901 Jy
! Component: 1500  -  total flux cleaned = -0.00444494 Jy
! Component: 1550  -  total flux cleaned = -0.00448253 Jy
! Component: 1600  -  total flux cleaned = -0.00455672 Jy
! Component: 1650  -  total flux cleaned = -0.00459386 Jy
! Component: 1700  -  total flux cleaned = -0.00470319 Jy
! Component: 1750  -  total flux cleaned = -0.00472128 Jy
! Component: 1800  -  total flux cleaned = -0.00475665 Jy
! Component: 1850  -  total flux cleaned = -0.00479177 Jy
! Component: 1900  -  total flux cleaned = -0.00484437 Jy
! Component: 1950  -  total flux cleaned = -0.0049483 Jy
! Component: 2000  -  total flux cleaned = -0.00510255 Jy
! Component: 2050  -  total flux cleaned = -0.00513662 Jy
! Component: 2100  -  total flux cleaned = -0.00522105 Jy
! Component: 2150  -  total flux cleaned = -0.00530449 Jy
! Component: 2200  -  total flux cleaned = -0.00537072 Jy
! Component: 2250  -  total flux cleaned = -0.005502 Jy
! Component: 2300  -  total flux cleaned = -0.00553468 Jy
! Component: 2350  -  total flux cleaned = -0.00559921 Jy
! Component: 2400  -  total flux cleaned = -0.00572711 Jy
! Component: 2450  -  total flux cleaned = -0.00575852 Jy
! Component: 2500  -  total flux cleaned = -0.00577435 Jy
! Component: 2550  -  total flux cleaned = -0.00585246 Jy
! Component: 2600  -  total flux cleaned = -0.00596074 Jy
! Component: 2650  -  total flux cleaned = -0.00599143 Jy
! Component: 2700  -  total flux cleaned = -0.00606753 Jy
! Component: 2750  -  total flux cleaned = -0.00608272 Jy
! Component: 2800  -  total flux cleaned = -0.00617254 Jy
! Component: 2850  -  total flux cleaned = -0.00626175 Jy
! Component: 2900  -  total flux cleaned = -0.00621752 Jy
! Component: 2950  -  total flux cleaned = -0.00630527 Jy
! Component: 3000  -  total flux cleaned = -0.00636338 Jy
! Component: 3050  -  total flux cleaned = -0.00634889 Jy
! Component: 3100  -  total flux cleaned = -0.00636328 Jy
! Component: 3150  -  total flux cleaned = -0.00641999 Jy
! Component: 3200  -  total flux cleaned = -0.00642001 Jy
! Component: 3250  -  total flux cleaned = -0.00649 Jy
! Component: 3300  -  total flux cleaned = -0.00643444 Jy
! Component: 3350  -  total flux cleaned = -0.00648967 Jy
! Component: 3400  -  total flux cleaned = -0.00646223 Jy
! Component: 3450  -  total flux cleaned = -0.00648963 Jy
! Component: 3500  -  total flux cleaned = -0.006503 Jy
! Component: 3550  -  total flux cleaned = -0.00650299 Jy
! Component: 3600  -  total flux cleaned = -0.00654298 Jy
! Component: 3650  -  total flux cleaned = -0.00652975 Jy
! Component: 3700  -  total flux cleaned = -0.00651667 Jy
! Component: 3750  -  total flux cleaned = -0.00647753 Jy
! Component: 3800  -  total flux cleaned = -0.00650357 Jy
! Component: 3850  -  total flux cleaned = -0.00647764 Jy
! Component: 3900  -  total flux cleaned = -0.00649039 Jy
! Component: 3950  -  total flux cleaned = -0.00646491 Jy
! Component: 4000  -  total flux cleaned = -0.00645226 Jy
! Component: 4050  -  total flux cleaned = -0.00642715 Jy
! Total flux subtracted in 4096 components = -0.00643964 Jy
! Clean residual min=-0.000757 max=0.000971 Jy/beam
! Clean residual mean=-0.000002 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.227475 Jy
keep
! Adding 267 model components to the UV plane model.
! The established model now contains 380 components and 0.227476 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2118+2034_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.746 x 8.204 at 5.117 degrees (North through East)
! Clean map  min=-0.0014922  max=0.12638 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2118+2034_S_map.fits
wmodel /image_prod/ug002_uva//J2118+2034_S_map.mod
! Writing 380 model components to file: /image_prod/ug002_uva//J2118+2034_S_map.mod
wobs   /image_prod/ug002_uva//J2118+2034_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2118+2034_S_uvs.fits
wwins  /image_prod/ug002_uva//J2118+2034_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2118+2034_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.126378 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000228792 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.543113 0.543113 1.08623 2.17245 4.34491 8.68981 17.3796 34.7593 69.5185
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.126 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  552.37 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2118+2034_S_dfm.log closed on Thu Mar  5 05:09:35 2020