! Started logfile: /image_prod/ug002_uva//J2115+2933_X_h_dfm.log on Thu Mar 5 05:08:36 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2115+2933_X_h_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2115+2933_X_h_uva.fits ! AN table 1: 21 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.755291 visibilities/baseline/integration-bin. ! Found source: J2115+2933 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6852 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2115+2933_X_h] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.137078Jy sigma=8.113074 ! Fit after self-cal, rms=0.470915Jy sigma=3.352396 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7233 mas, bmaj=1.346 mas, bpa=-2.18 degrees ! Estimated noise=1.74311 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.401839 Jy ! Component: 100 - total flux cleaned = 0.500149 Jy ! Total flux subtracted in 100 components = 0.500149 Jy ! Clean residual min=-0.015860 max=0.040755 Jy/beam ! Clean residual mean=-0.000027 rms=0.003903 Jy/beam ! Combined flux in latest and established models = 0.500149 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.500149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106753Jy sigma=0.758222 ! Fit after self-cal, rms=0.106697Jy sigma=0.757649 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0448558 Jy ! Component: 100 - total flux cleaned = 0.0691144 Jy ! Total flux subtracted in 100 components = 0.0691144 Jy ! Clean residual min=-0.011309 max=0.017856 Jy/beam ! Clean residual mean=-0.000020 rms=0.002493 Jy/beam ! Combined flux in latest and established models = 0.569263 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.569263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078591Jy sigma=0.546419 ! Fit after self-cal, rms=0.078405Jy sigma=0.545073 ! Inverting map ! Added new window around map position (-1.8, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180446 Jy ! Component: 100 - total flux cleaned = 0.0301201 Jy ! Total flux subtracted in 100 components = 0.0301201 Jy ! Clean residual min=-0.010198 max=0.011968 Jy/beam ! Clean residual mean=-0.000017 rms=0.002147 Jy/beam ! Combined flux in latest and established models = 0.599383 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.599383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071733Jy sigma=0.498054 ! Fit after self-cal, rms=0.071521Jy sigma=0.496231 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9169 mas, bmaj=1.62 mas, bpa=-1.166 degrees ! Estimated noise=1.21658 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172272 Jy ! Component: 100 - total flux cleaned = 0.028402 Jy ! Component: 150 - total flux cleaned = 0.0362529 Jy ! Component: 200 - total flux cleaned = 0.0419443 Jy ! Total flux subtracted in 200 components = 0.0419443 Jy ! Clean residual min=-0.010359 max=0.009896 Jy/beam ! Clean residual mean=-0.000030 rms=0.002212 Jy/beam ! Combined flux in latest and established models = 0.641328 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 44 components and 0.641328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066374Jy sigma=0.460572 ! Fit after self-cal, rms=0.065983Jy sigma=0.456801 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9169 x 1.62 at -1.166 degrees (North through East) ! Clean map min=-0.0090269 max=0.53042 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 0.97 KP 1.07 ! LA 1.04 MK 1.05 OV 0.94 PT 0.93 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.97 KP 1.05 ! LA 1.04 MK 1.05 OV 0.93 PT 0.94 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.97 KP 1.07 ! LA 1.03 MK 1.06 OV 0.94 PT 0.93 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.95 KP 1.06 ! LA 1.04 MK 1.05 OV 0.94 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 0.96 KP 1.05 ! LA 1.02 MK 1.06 OV 0.95 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.96 KP 1.05 ! LA 1.03 MK 1.05 OV 0.94 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.95 KP 1.07 ! LA 1.03 MK 1.04 OV 0.93 PT 0.94 ! SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.95 KP 1.07 ! LA 1.02 MK 1.06 OV 0.95 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.96 KP 1.05 ! LA 1.02 MK 1.03 OV 0.95 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.97 KP 1.05 ! LA 1.01 MK 1.05 OV 0.95 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.95 KP 1.03 ! LA 1.01 MK 1.05 OV 0.93 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.97 KP 1.04 ! LA 1.02 MK 1.05 OV 0.96 PT 0.92 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.065983Jy sigma=0.456801 ! Fit after self-cal, rms=0.056796Jy sigma=0.387464 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.923 mas, bmaj=1.628 mas, bpa=-1.01 degrees ! Estimated noise=1.21351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041765 Jy ! Component: 100 - total flux cleaned = 0.0055024 Jy ! Component: 150 - total flux cleaned = 0.00572026 Jy ! Component: 200 - total flux cleaned = 0.00572378 Jy ! Total flux subtracted in 200 components = 0.00572378 Jy ! Clean residual min=-0.003326 max=0.003497 Jy/beam ! Clean residual mean=-0.000004 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.647051 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 66 components and 0.647052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056170Jy sigma=0.383353 ! Fit after self-cal, rms=0.056151Jy sigma=0.382951 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056151Jy sigma=0.382951 ! Fit after self-cal, rms=0.055331Jy sigma=0.376915 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9233 mas, bmaj=1.626 mas, bpa=-1.184 degrees ! Estimated noise=1.21356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232651 Jy ! Component: 100 - total flux cleaned = 0.00303106 Jy ! Component: 150 - total flux cleaned = 0.00332732 Jy ! Component: 200 - total flux cleaned = 0.00358517 Jy ! Total flux subtracted in 200 components = 0.00358517 Jy ! Clean residual min=-0.002689 max=0.003045 Jy/beam ! Clean residual mean=-0.000003 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.650637 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.650637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055084Jy sigma=0.375291 ! Fit after self-cal, rms=0.055074Jy sigma=0.375151 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220527 Jy ! Component: 100 - total flux cleaned = 0.00261946 Jy ! Component: 150 - total flux cleaned = 0.00297435 Jy ! Component: 200 - total flux cleaned = 0.00323903 Jy ! Total flux subtracted in 200 components = 0.00323903 Jy ! Clean residual min=-0.002486 max=0.002831 Jy/beam ! Clean residual mean=-0.000002 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.653876 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.653876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054885Jy sigma=0.373775 ! Fit after self-cal, rms=0.054871Jy sigma=0.373701 ! Inverting map ! Added new window around map position (-13.2, -42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264909 Jy ! Component: 100 - total flux cleaned = 0.00395856 Jy ! Component: 150 - total flux cleaned = 0.0048099 Jy ! Component: 200 - total flux cleaned = 0.00543376 Jy ! Total flux subtracted in 200 components = 0.00543376 Jy ! Clean residual min=-0.002242 max=0.002369 Jy/beam ! Clean residual mean=-0.000000 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.65931 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 0.65931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054707Jy sigma=0.372563 ! Fit after self-cal, rms=0.054697Jy sigma=0.372517 ! Inverting map ! Added new window around map position (4.6, 27.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137972 Jy ! Component: 100 - total flux cleaned = 0.00203599 Jy ! Component: 150 - total flux cleaned = 0.0025127 Jy ! Component: 200 - total flux cleaned = 0.00290805 Jy ! Total flux subtracted in 200 components = 0.00290805 Jy ! Clean residual min=-0.002127 max=0.002091 Jy/beam ! Clean residual mean=-0.000002 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.662218 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 117 components and 0.662218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054582Jy sigma=0.371683 ! Fit after self-cal, rms=0.054576Jy sigma=0.371653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054576Jy sigma=0.371653 ! Fit after self-cal, rms=0.054521Jy sigma=0.371334 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9235 mas, bmaj=1.627 mas, bpa=-1.237 degrees ! Estimated noise=1.21311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000457365 Jy ! Component: 100 - total flux cleaned = 0.000865874 Jy ! Component: 150 - total flux cleaned = 0.00119846 Jy ! Component: 200 - total flux cleaned = 0.00151012 Jy ! Total flux subtracted in 200 components = 0.00151012 Jy ! Clean residual min=-0.002067 max=0.002003 Jy/beam ! Clean residual mean=-0.000003 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.663728 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 125 components and 0.663728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054456Jy sigma=0.370897 ! Fit after self-cal, rms=0.054454Jy sigma=0.370882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.2, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015862 Jy ! Component: 100 - total flux cleaned = 0.00193739 Jy ! Component: 150 - total flux cleaned = 0.00228898 Jy ! Component: 200 - total flux cleaned = 0.0024709 Jy ! Total flux subtracted in 200 components = 0.0024709 Jy ! Clean residual min=-0.002019 max=0.001697 Jy/beam ! Clean residual mean=-0.000002 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.666199 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 136 components and 0.666199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054373Jy sigma=0.370316 ! Fit after self-cal, rms=0.054368Jy sigma=0.370296 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054368Jy sigma=0.370296 ! Fit after self-cal, rms=0.054362Jy sigma=0.370252 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.314 mas, bmaj=2.658 mas, bpa=25.8 degrees ! Estimated noise=1.57496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119502 Jy ! Component: 100 - total flux cleaned = 0.00206316 Jy ! Component: 150 - total flux cleaned = 0.00245775 Jy ! Component: 200 - total flux cleaned = 0.00278242 Jy ! Total flux subtracted in 200 components = 0.00278242 Jy ! Clean residual min=-0.001848 max=0.001966 Jy/beam ! Clean residual mean=-0.000004 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.668981 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 149 components and 0.668981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054350Jy sigma=0.370120 ! Fit after self-cal, rms=0.054349Jy sigma=0.370104 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472825 Jy ! Component: 100 - total flux cleaned = 0.000710956 Jy ! Component: 150 - total flux cleaned = 0.000841083 Jy ! Component: 200 - total flux cleaned = 0.000981138 Jy ! Total flux subtracted in 200 components = 0.000981138 Jy ! Clean residual min=-0.001816 max=0.001864 Jy/beam ! Clean residual mean=-0.000004 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.669963 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 161 components and 0.669963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054346Jy sigma=0.370053 ! Fit after self-cal, rms=0.054344Jy sigma=0.370048 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9236 mas, bmaj=1.627 mas, bpa=-1.251 degrees ! Estimated noise=1.21307 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9236 x 1.627 at -1.251 degrees (North through East) ! Clean map min=-0.0018648 max=0.52746 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054344Jy sigma=0.370048 ! Fit after self-cal, rms=0.051093Jy sigma=0.342573 ! Inverting map and beam ! Estimated beam: bmin=0.9234 mas, bmaj=1.626 mas, bpa=-1.262 degrees ! Estimated noise=1.21332 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127228 Jy ! Component: 100 - total flux cleaned = -5.5142e-05 Jy ! Component: 150 - total flux cleaned = 4.36374e-05 Jy ! Component: 200 - total flux cleaned = 7.52937e-05 Jy ! Total flux subtracted in 200 components = 7.52937e-05 Jy ! Clean residual min=-0.001894 max=0.001670 Jy/beam ! Clean residual mean=-0.000001 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.670038 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 176 components and 0.670038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051048Jy sigma=0.342293 ! Fit after self-cal, rms=0.051047Jy sigma=0.342290 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.05515e-05 Jy ! Component: 100 - total flux cleaned = 8.85698e-05 Jy ! Component: 150 - total flux cleaned = 0.000116852 Jy ! Component: 200 - total flux cleaned = 0.000170299 Jy ! Total flux subtracted in 200 components = 0.000170299 Jy ! Clean residual min=-0.001884 max=0.001614 Jy/beam ! Clean residual mean=-0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.670208 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 184 components and 0.670208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051017Jy sigma=0.342107 ! Fit after self-cal, rms=0.051016Jy sigma=0.342103 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051016Jy sigma=0.342103 ! Fit after self-cal, rms=0.051027Jy sigma=0.342083 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7281 mas, bmaj=1.351 mas, bpa=-2.362 degrees ! Estimated noise=1.74415 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.401859 Jy ! Component: 100 - total flux cleaned = 0.499752 Jy ! Component: 150 - total flux cleaned = 0.543491 Jy ! Component: 200 - total flux cleaned = 0.566655 Jy ! Total flux subtracted in 200 components = 0.566655 Jy ! Clean residual min=-0.006218 max=0.012259 Jy/beam ! Clean residual mean=-0.000011 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.566655 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.566655 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9234 mas, bmaj=1.626 mas, bpa=-1.265 degrees ! Estimated noise=1.21355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263266 Jy ! Component: 100 - total flux cleaned = 0.0426669 Jy ! Component: 150 - total flux cleaned = 0.0538379 Jy ! Component: 200 - total flux cleaned = 0.0619414 Jy ! Total flux subtracted in 200 components = 0.0619414 Jy ! Clean residual min=-0.003272 max=0.004672 Jy/beam ! Clean residual mean=-0.000013 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.628596 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 53 components and 0.628596 Jy ! Inverting map ! Added new window around map position (-1.8, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603121 Jy ! Component: 100 - total flux cleaned = 0.0107134 Jy ! Component: 150 - total flux cleaned = 0.0145853 Jy ! Component: 200 - total flux cleaned = 0.0179124 Jy ! Total flux subtracted in 200 components = 0.0179124 Jy ! Clean residual min=-0.002731 max=0.002357 Jy/beam ! Clean residual mean=-0.000007 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.646509 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 83 components and 0.646509 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.313 mas, bmaj=2.656 mas, bpa=25.79 degrees ! Estimated noise=1.57633 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500652 Jy ! Component: 100 - total flux cleaned = 0.00862329 Jy ! Component: 150 - total flux cleaned = 0.0114804 Jy ! Component: 200 - total flux cleaned = 0.0137799 Jy ! Total flux subtracted in 200 components = 0.0137799 Jy ! Clean residual min=-0.002109 max=0.002422 Jy/beam ! Clean residual mean=-0.000007 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.660289 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187462 Jy ! Component: 100 - total flux cleaned = 0.00343777 Jy ! Component: 150 - total flux cleaned = 0.00476358 Jy ! Component: 200 - total flux cleaned = 0.0058953 Jy ! Total flux subtracted in 200 components = 0.0058953 Jy ! Clean residual min=-0.001742 max=0.001991 Jy/beam ! Clean residual mean=-0.000003 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.666184 Jy ! Adding 120 model components to the UV plane model. ! The established model now contains 189 components and 0.666184 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9234 mas, bmaj=1.626 mas, bpa=-1.265 degrees ! Estimated noise=1.21355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105857 Jy ! Component: 100 - total flux cleaned = 0.000398158 Jy ! Component: 150 - total flux cleaned = 0.000956443 Jy ! Component: 200 - total flux cleaned = 0.00147084 Jy ! Total flux subtracted in 200 components = 0.00147084 Jy ! Clean residual min=-0.002008 max=0.001711 Jy/beam ! Clean residual mean=-0.000002 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.667655 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 212 components and 0.667654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051124Jy sigma=0.342912 ! Fit after self-cal, rms=0.051099Jy sigma=0.342770 wmodel J2115+2933_X_h_map.mod ! Writing 212 model components to file: J2115+2933_X_h_map.mod wobs J2115+2933_X_h_uvs.fits ! Writing UV FITS file: J2115+2933_X_h_uvs.fits wwins J2115+2933_X_h_map.win ! wwins: Wrote 9 windows to J2115+2933_X_h_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216258 Jy ! Component: 100 - total flux cleaned = -0.000214061 Jy ! Component: 150 - total flux cleaned = -0.000213714 Jy ! Component: 200 - total flux cleaned = -0.000243 Jy ! Component: 250 - total flux cleaned = -0.000186931 Jy ! Component: 300 - total flux cleaned = -0.000131908 Jy ! Component: 350 - total flux cleaned = -0.000104405 Jy ! Component: 400 - total flux cleaned = -5.153e-05 Jy ! Component: 450 - total flux cleaned = 7.6653e-05 Jy ! Component: 500 - total flux cleaned = 0.000151295 Jy ! Component: 550 - total flux cleaned = 0.000249178 Jy ! Component: 600 - total flux cleaned = 0.000297602 Jy ! Component: 650 - total flux cleaned = 0.000416596 Jy ! Component: 700 - total flux cleaned = 0.000439956 Jy ! Component: 750 - total flux cleaned = 0.000509489 Jy ! Component: 800 - total flux cleaned = 0.000554992 Jy ! Component: 850 - total flux cleaned = 0.000644716 Jy ! Component: 900 - total flux cleaned = 0.000667087 Jy ! Component: 950 - total flux cleaned = 0.000820688 Jy ! Component: 1000 - total flux cleaned = 0.000907279 Jy ! Component: 1050 - total flux cleaned = 0.000993172 Jy ! Component: 1100 - total flux cleaned = 0.00107802 Jy ! Component: 1150 - total flux cleaned = 0.00120319 Jy ! Component: 1200 - total flux cleaned = 0.00128581 Jy ! Component: 1250 - total flux cleaned = 0.00134711 Jy ! Component: 1300 - total flux cleaned = 0.00146806 Jy ! Component: 1350 - total flux cleaned = 0.00148815 Jy ! Component: 1400 - total flux cleaned = 0.00158704 Jy ! Component: 1450 - total flux cleaned = 0.00160669 Jy ! Component: 1500 - total flux cleaned = 0.00172338 Jy ! Component: 1550 - total flux cleaned = 0.00178078 Jy ! Component: 1600 - total flux cleaned = 0.0018759 Jy ! Component: 1650 - total flux cleaned = 0.00193235 Jy ! Component: 1700 - total flux cleaned = 0.00198839 Jy ! Component: 1750 - total flux cleaned = 0.00208095 Jy ! Component: 1800 - total flux cleaned = 0.00208093 Jy ! Component: 1850 - total flux cleaned = 0.00220839 Jy ! Component: 1900 - total flux cleaned = 0.00226253 Jy ! Component: 1950 - total flux cleaned = 0.00228042 Jy ! Component: 2000 - total flux cleaned = 0.00236902 Jy ! Component: 2050 - total flux cleaned = 0.00240449 Jy ! Component: 2100 - total flux cleaned = 0.00249203 Jy ! Component: 2150 - total flux cleaned = 0.0025612 Jy ! Component: 2200 - total flux cleaned = 0.00261269 Jy ! Component: 2250 - total flux cleaned = 0.00276622 Jy ! Component: 2300 - total flux cleaned = 0.00288488 Jy ! Component: 2350 - total flux cleaned = 0.00286803 Jy ! Component: 2400 - total flux cleaned = 0.00300172 Jy ! Component: 2450 - total flux cleaned = 0.00305125 Jy ! Component: 2500 - total flux cleaned = 0.0031501 Jy ! Component: 2550 - total flux cleaned = 0.00313365 Jy ! Component: 2600 - total flux cleaned = 0.00327966 Jy ! Component: 2650 - total flux cleaned = 0.00329568 Jy ! Component: 2700 - total flux cleaned = 0.0033596 Jy ! Component: 2750 - total flux cleaned = 0.00348683 Jy ! Component: 2800 - total flux cleaned = 0.00348682 Jy ! Component: 2850 - total flux cleaned = 0.00350237 Jy ! Component: 2900 - total flux cleaned = 0.00356472 Jy ! Component: 2950 - total flux cleaned = 0.00362666 Jy ! Component: 3000 - total flux cleaned = 0.00365766 Jy ! Component: 3050 - total flux cleaned = 0.0037189 Jy ! Component: 3100 - total flux cleaned = 0.00382526 Jy ! Component: 3150 - total flux cleaned = 0.00387051 Jy ! Component: 3200 - total flux cleaned = 0.0039005 Jy ! Component: 3250 - total flux cleaned = 0.00391539 Jy ! Component: 3300 - total flux cleaned = 0.00401919 Jy ! Component: 3350 - total flux cleaned = 0.00406309 Jy ! Component: 3400 - total flux cleaned = 0.00410695 Jy ! Component: 3450 - total flux cleaned = 0.00407769 Jy ! Component: 3500 - total flux cleaned = 0.00414992 Jy ! Component: 3550 - total flux cleaned = 0.00420732 Jy ! Component: 3600 - total flux cleaned = 0.00422162 Jy ! Component: 3650 - total flux cleaned = 0.00417886 Jy ! Component: 3700 - total flux cleaned = 0.00416463 Jy ! Component: 3750 - total flux cleaned = 0.00426319 Jy ! Component: 3800 - total flux cleaned = 0.00429109 Jy ! Component: 3850 - total flux cleaned = 0.00429108 Jy ! Component: 3900 - total flux cleaned = 0.00437413 Jy ! Component: 3950 - total flux cleaned = 0.00436028 Jy ! Component: 4000 - total flux cleaned = 0.00436031 Jy ! Component: 4050 - total flux cleaned = 0.00442862 Jy ! Total flux subtracted in 4096 components = 0.00446931 Jy ! Clean residual min=-0.000896 max=0.000797 Jy/beam ! Clean residual mean=-0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.672124 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 503 components and 0.672123 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2115+2933_X_h_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9234 x 1.626 at -1.265 degrees (North through East) ! Clean map min=-0.0013696 max=0.52851 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2115+2933_X_h_map.fits wmodel /image_prod/ug002_uva//J2115+2933_X_h_map.mod ! Writing 503 model components to file: /image_prod/ug002_uva//J2115+2933_X_h_map.mod wobs /image_prod/ug002_uva//J2115+2933_X_h_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2115+2933_X_h_uvs.fits wwins /image_prod/ug002_uva//J2115+2933_X_h_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J2115+2933_X_h_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.528506 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00022976 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.130421 0.130421 0.260841 0.521682 1.04336 2.08673 4.17346 8.34692 16.6938 33.3877 66.7753 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.528 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2300.25 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2115+2933_X_h_dfm.log closed on Thu Mar 5 05:08:40 2020