! Started logfile: /image_prod/ug002_uva//J2106+0231_S_dfm.log on Thu Mar  5 05:03:33 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2106+0231_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2106+0231_S_uva.fits
! AN table 1: 60 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.742857 visibilities/baseline/integration-bin.
! Found source: J2106+0231
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 36 lines of history.
! 
! Reading 3744 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2106+0231_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017094Jy  sigma=7.761342
! Fit after  self-cal, rms=0.838077Jy  sigma=6.388327
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.976 mas, bmaj=7.885 mas, bpa=-12.57 degrees
! Estimated noise=2.10274 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129281 Jy
! Component: 100  -  total flux cleaned = 0.157849 Jy
! Total flux subtracted in 100 components = 0.157849 Jy
! Clean residual min=-0.008114 max=0.010675 Jy/beam
! Clean residual mean=0.000007 rms=0.002109 Jy/beam
! Combined flux in latest and established models = 0.157849 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.157849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067691Jy  sigma=0.463486
! Fit after  self-cal, rms=0.067681Jy  sigma=0.463457
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.461 mas, bmaj=8.573 mas, bpa=-12.42 degrees
! Estimated noise=1.57245 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00928346 Jy
! Component: 100  -  total flux cleaned = 0.0137001 Jy
! Component: 150  -  total flux cleaned = 0.0164604 Jy
! Component: 200  -  total flux cleaned = 0.0183083 Jy
! Total flux subtracted in 200 components = 0.0183083 Jy
! Clean residual min=-0.007224 max=0.006262 Jy/beam
! Clean residual mean=0.000008 rms=0.001492 Jy/beam
! Combined flux in latest and established models = 0.176157 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 22 components and 0.176157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066725Jy  sigma=0.452081
! Fit after  self-cal, rms=0.066714Jy  sigma=0.452042
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.461 x 8.573 at -12.42 degrees (North through East)
! Clean map  min=-0.0070704  max=0.1646 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.99     HN        1.09     KP        1.03     
!   MK        1.03     NL        0.96     OV        0.92     SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.28     FD        1.00     HN        1.04     KP        1.05     
!   MK        1.04     NL        1.10     OV        0.89     SC        0.92     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.05     KP        1.02     
!   MK        0.99     NL        0.89     OV        0.91     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.066714Jy  sigma=0.452042
! Fit after  self-cal, rms=0.065370Jy  sigma=0.430513
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.474 mas, bmaj=8.596 mas, bpa=-12.04 degrees
! Estimated noise=1.57319 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00183833 Jy
! Component: 100  -  total flux cleaned = -0.00305 Jy
! Component: 150  -  total flux cleaned = -0.00360033 Jy
! Component: 200  -  total flux cleaned = -0.00385284 Jy
! Total flux subtracted in 200 components = -0.00385284 Jy
! Clean residual min=-0.003597 max=0.004769 Jy/beam
! Clean residual mean=0.000006 rms=0.001021 Jy/beam
! Combined flux in latest and established models = 0.172304 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 31 components and 0.172304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065262Jy  sigma=0.430205
! Fit after  self-cal, rms=0.065356Jy  sigma=0.430029
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065356Jy  sigma=0.430029
! Fit after  self-cal, rms=0.065083Jy  sigma=0.423457
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.476 mas, bmaj=8.642 mas, bpa=-12.03 degrees
! Estimated noise=1.57096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000770143 Jy
! Component: 100  -  total flux cleaned = -0.000898697 Jy
! Component: 150  -  total flux cleaned = -0.000987396 Jy
! Component: 200  -  total flux cleaned = -0.00102578 Jy
! Total flux subtracted in 200 components = -0.00102578 Jy
! Clean residual min=-0.002852 max=0.002816 Jy/beam
! Clean residual mean=0.000002 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.171279 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.171279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065048Jy  sigma=0.423390
! Fit after  self-cal, rms=0.065077Jy  sigma=0.423357
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.41125e-05 Jy
! Component: 100  -  total flux cleaned = -6.64891e-05 Jy
! Component: 150  -  total flux cleaned = -0.000111644 Jy
! Component: 200  -  total flux cleaned = -0.000154334 Jy
! Total flux subtracted in 200 components = -0.000154334 Jy
! Clean residual min=-0.002845 max=0.002823 Jy/beam
! Clean residual mean=0.000002 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.171124 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 45 components and 0.171124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065065Jy  sigma=0.423335
! Fit after  self-cal, rms=0.065066Jy  sigma=0.423333
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065066Jy  sigma=0.423333
! Fit after  self-cal, rms=0.066907Jy  sigma=0.420376
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.474 mas, bmaj=8.65 mas, bpa=-12.04 degrees
! Estimated noise=1.57015 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000268833 Jy
! Component: 100  -  total flux cleaned = 0.000323107 Jy
! Component: 150  -  total flux cleaned = 0.00037228 Jy
! Component: 200  -  total flux cleaned = 0.000416814 Jy
! Total flux subtracted in 200 components = 0.000416814 Jy
! Clean residual min=-0.002627 max=0.002365 Jy/beam
! Clean residual mean=-0.000001 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.171541 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 52 components and 0.171541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066895Jy  sigma=0.420325
! Fit after  self-cal, rms=0.066929Jy  sigma=0.420302
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.96124e-05 Jy
! Component: 100  -  total flux cleaned = 9.32049e-05 Jy
! Component: 150  -  total flux cleaned = 0.000116497 Jy
! Component: 200  -  total flux cleaned = 0.000138425 Jy
! Total flux subtracted in 200 components = 0.000138425 Jy
! Clean residual min=-0.002604 max=0.002324 Jy/beam
! Clean residual mean=-0.000001 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.171679 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 58 components and 0.171679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066921Jy  sigma=0.420284
! Fit after  self-cal, rms=0.066922Jy  sigma=0.420283
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066922Jy  sigma=0.420283
! Fit after  self-cal, rms=0.066976Jy  sigma=0.420270
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.159 mas, bmaj=11.06 mas, bpa=-4.516 degrees
! Estimated noise=1.87989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000304532 Jy
! Component: 100  -  total flux cleaned = 0.000410795 Jy
! Component: 150  -  total flux cleaned = 0.000475108 Jy
! Component: 200  -  total flux cleaned = 0.000519841 Jy
! Total flux subtracted in 200 components = 0.000519841 Jy
! Clean residual min=-0.002778 max=0.002805 Jy/beam
! Clean residual mean=-0.000002 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.172199 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.172199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066980Jy  sigma=0.420265
! Fit after  self-cal, rms=0.066968Jy  sigma=0.420238
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.46982e-05 Jy
! Component: 100  -  total flux cleaned = 7.59081e-05 Jy
! Component: 150  -  total flux cleaned = 0.000126554 Jy
! Component: 200  -  total flux cleaned = 0.000144822 Jy
! Total flux subtracted in 200 components = 0.000144822 Jy
! Clean residual min=-0.002758 max=0.002842 Jy/beam
! Clean residual mean=-0.000002 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.172344 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 69 components and 0.172344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066973Jy  sigma=0.420246
! Fit after  self-cal, rms=0.066965Jy  sigma=0.420232
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.475 mas, bmaj=8.652 mas, bpa=-12.02 degrees
! Estimated noise=1.57068 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.475 x 8.652 at -12.02 degrees (North through East)
! Clean map  min=-0.0024653  max=0.16461 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.998 mas, bmaj=7.886 mas, bpa=-11.87 degrees
! Estimated noise=2.09432 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128639 Jy
! Component: 100  -  total flux cleaned = 0.156728 Jy
! Component: 150  -  total flux cleaned = 0.164427 Jy
! Component: 200  -  total flux cleaned = 0.167817 Jy
! Total flux subtracted in 200 components = 0.167817 Jy
! Clean residual min=-0.002971 max=0.002920 Jy/beam
! Clean residual mean=-0.000000 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.167817 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.167817 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.475 mas, bmaj=8.652 mas, bpa=-12.02 degrees
! Estimated noise=1.57068 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020327 Jy
! Component: 100  -  total flux cleaned = 0.00271922 Jy
! Component: 150  -  total flux cleaned = 0.00310071 Jy
! Component: 200  -  total flux cleaned = 0.00334302 Jy
! Total flux subtracted in 200 components = 0.00334302 Jy
! Clean residual min=-0.002515 max=0.002215 Jy/beam
! Clean residual mean=-0.000001 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.17116 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 39 components and 0.17116 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.159 mas, bmaj=11.06 mas, bpa=-4.516 degrees
! Estimated noise=1.87989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00041788 Jy
! Component: 100  -  total flux cleaned = 0.000570864 Jy
! Component: 150  -  total flux cleaned = 0.000676455 Jy
! Component: 200  -  total flux cleaned = 0.000800502 Jy
! Total flux subtracted in 200 components = 0.000800502 Jy
! Clean residual min=-0.002801 max=0.002836 Jy/beam
! Clean residual mean=-0.000002 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.171961 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.1278e-05 Jy
! Component: 100  -  total flux cleaned = 0.000168804 Jy
! Component: 150  -  total flux cleaned = 0.000219085 Jy
! Component: 200  -  total flux cleaned = 0.000249908 Jy
! Total flux subtracted in 200 components = 0.000249908 Jy
! Clean residual min=-0.002764 max=0.002854 Jy/beam
! Clean residual mean=-0.000002 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.172211 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 60 components and 0.172211 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.475 mas, bmaj=8.652 mas, bpa=-12.02 degrees
! Estimated noise=1.57068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000113294 Jy
! Component: 100  -  total flux cleaned = -3.56932e-05 Jy
! Component: 150  -  total flux cleaned = -0.000151629 Jy
! Component: 200  -  total flux cleaned = -0.000198463 Jy
! Total flux subtracted in 200 components = -0.000198463 Jy
! Clean residual min=-0.002458 max=0.002201 Jy/beam
! Clean residual mean=-0.000001 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.172012 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 71 components and 0.172012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066971Jy  sigma=0.420330
! Fit after  self-cal, rms=0.066972Jy  sigma=0.420319
wmodel J2106+0231_S_map.mod
! Writing 71 model components to file: J2106+0231_S_map.mod
wobs   J2106+0231_S_uvs.fits
! Writing UV FITS file: J2106+0231_S_uvs.fits
wwins  J2106+0231_S_map.win
! wwins: Wrote 1 windows to J2106+0231_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000366378 Jy
! Component: 100  -  total flux cleaned = -0.000367109 Jy
! Component: 150  -  total flux cleaned = -0.000148422 Jy
! Component: 200  -  total flux cleaned = 2.67885e-05 Jy
! Component: 250  -  total flux cleaned = 0.000194933 Jy
! Component: 300  -  total flux cleaned = 0.000325079 Jy
! Component: 350  -  total flux cleaned = 0.000482181 Jy
! Component: 400  -  total flux cleaned = 0.000603614 Jy
! Component: 450  -  total flux cleaned = 0.000662573 Jy
! Component: 500  -  total flux cleaned = 0.000720548 Jy
! Component: 550  -  total flux cleaned = 0.000776821 Jy
! Component: 600  -  total flux cleaned = 0.000858584 Jy
! Component: 650  -  total flux cleaned = 0.000833423 Jy
! Component: 700  -  total flux cleaned = 0.000808434 Jy
! Component: 750  -  total flux cleaned = 0.000733461 Jy
! Component: 800  -  total flux cleaned = 0.000561937 Jy
! Component: 850  -  total flux cleaned = 0.000490006 Jy
! Component: 900  -  total flux cleaned = 0.000348353 Jy
! Component: 950  -  total flux cleaned = 0.000278698 Jy
! Component: 1000  -  total flux cleaned = 0.000165389 Jy
! Component: 1050  -  total flux cleaned = 7.65277e-05 Jy
! Component: 1100  -  total flux cleaned = 1.11802e-05 Jy
! Component: 1150  -  total flux cleaned = -5.37731e-05 Jy
! Component: 1200  -  total flux cleaned = -0.000201174 Jy
! Component: 1250  -  total flux cleaned = -0.000242235 Jy
! Component: 1300  -  total flux cleaned = -0.000323625 Jy
! Component: 1350  -  total flux cleaned = -0.000403189 Jy
! Component: 1400  -  total flux cleaned = -0.000442797 Jy
! Component: 1450  -  total flux cleaned = -0.000539418 Jy
! Component: 1500  -  total flux cleaned = -0.000558584 Jy
! Component: 1550  -  total flux cleaned = -0.000652532 Jy
! Component: 1600  -  total flux cleaned = -0.000689658 Jy
! Component: 1650  -  total flux cleaned = -0.000798803 Jy
! Component: 1700  -  total flux cleaned = -0.000834714 Jy
! Component: 1750  -  total flux cleaned = -0.00090559 Jy
! Component: 1800  -  total flux cleaned = -0.00102751 Jy
! Component: 1850  -  total flux cleaned = -0.00107915 Jy
! Component: 1900  -  total flux cleaned = -0.00119814 Jy
! Component: 1950  -  total flux cleaned = -0.00126484 Jy
! Component: 2000  -  total flux cleaned = -0.00129789 Jy
! Component: 2050  -  total flux cleaned = -0.00131428 Jy
! Component: 2100  -  total flux cleaned = -0.00136272 Jy
! Component: 2150  -  total flux cleaned = -0.00142633 Jy
! Component: 2200  -  total flux cleaned = -0.00139494 Jy
! Component: 2250  -  total flux cleaned = -0.00142627 Jy
! Component: 2300  -  total flux cleaned = -0.00142641 Jy
! Component: 2350  -  total flux cleaned = -0.00142644 Jy
! Component: 2400  -  total flux cleaned = -0.00136643 Jy
! Component: 2450  -  total flux cleaned = -0.00135184 Jy
! Component: 2500  -  total flux cleaned = -0.00135197 Jy
! Component: 2550  -  total flux cleaned = -0.0013227 Jy
! Component: 2600  -  total flux cleaned = -0.00138043 Jy
! Component: 2650  -  total flux cleaned = -0.00132277 Jy
! Component: 2700  -  total flux cleaned = -0.00133692 Jy
! Component: 2750  -  total flux cleaned = -0.00132265 Jy
! Component: 2800  -  total flux cleaned = -0.00129451 Jy
! Component: 2850  -  total flux cleaned = -0.00125295 Jy
! Component: 2900  -  total flux cleaned = -0.00128054 Jy
! Component: 2950  -  total flux cleaned = -0.0013078 Jy
! Component: 3000  -  total flux cleaned = -0.00134822 Jy
! Component: 3050  -  total flux cleaned = -0.00134832 Jy
! Component: 3100  -  total flux cleaned = -0.00142795 Jy
! Component: 3150  -  total flux cleaned = -0.0013751 Jy
! Component: 3200  -  total flux cleaned = -0.00141428 Jy
! Component: 3250  -  total flux cleaned = -0.00137535 Jy
! Component: 3300  -  total flux cleaned = -0.00136252 Jy
! Component: 3350  -  total flux cleaned = -0.00134983 Jy
! Component: 3400  -  total flux cleaned = -0.00141342 Jy
! Component: 3450  -  total flux cleaned = -0.00142589 Jy
! Component: 3500  -  total flux cleaned = -0.0014008 Jy
! Component: 3550  -  total flux cleaned = -0.00140085 Jy
! Component: 3600  -  total flux cleaned = -0.00143793 Jy
! Component: 3650  -  total flux cleaned = -0.00142563 Jy
! Component: 3700  -  total flux cleaned = -0.00146229 Jy
! Component: 3750  -  total flux cleaned = -0.00143802 Jy
! Component: 3800  -  total flux cleaned = -0.00145011 Jy
! Component: 3850  -  total flux cleaned = -0.00142611 Jy
! Component: 3900  -  total flux cleaned = -0.00137863 Jy
! Component: 3950  -  total flux cleaned = -0.00141405 Jy
! Component: 4000  -  total flux cleaned = -0.00140219 Jy
! Component: 4050  -  total flux cleaned = -0.00139047 Jy
! Total flux subtracted in 4096 components = -0.00137884 Jy
! Clean residual min=-0.000718 max=0.000630 Jy/beam
! Clean residual mean=-0.000001 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.170633 Jy
keep
! Adding 273 model components to the UV plane model.
! The established model now contains 344 components and 0.170633 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2106+0231_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.475 x 8.652 at -12.02 degrees (North through East)
! Clean map  min=-0.0017115  max=0.1651 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2106+0231_S_map.fits
wmodel /image_prod/ug002_uva//J2106+0231_S_map.mod
! Writing 344 model components to file: /image_prod/ug002_uva//J2106+0231_S_map.mod
wobs   /image_prod/ug002_uva//J2106+0231_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2106+0231_S_uvs.fits
wwins  /image_prod/ug002_uva//J2106+0231_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J2106+0231_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.165098 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000196847 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.357691 0.357691 0.715382 1.43076 2.86153 5.72305 11.4461 22.8922 45.7844 91.5688
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.165 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  838.713 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2106+0231_S_dfm.log closed on Thu Mar  5 05:03:36 2020