! Started logfile: /image_prod/ug002_uva//J2055+6122_X_dfm.log on Thu Mar 5 05:00:54 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2055+6122_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2055+6122_X_uva.fits ! AN table 1: 100 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.925333 visibilities/baseline/integration-bin. ! Found source: J2055+6122 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 49968 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2055+6122_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.043785Jy sigma=9.527649 ! Fit after self-cal, rms=0.716780Jy sigma=6.524086 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7866 mas, bmaj=1.026 mas, bpa=-26.06 degrees ! Estimated noise=0.848517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.21778 Jy ! Component: 100 - total flux cleaned = 0.265477 Jy ! Total flux subtracted in 100 components = 0.265477 Jy ! Clean residual min=-0.008402 max=0.016968 Jy/beam ! Clean residual mean=0.000009 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.265477 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.265477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075891Jy sigma=0.655941 ! Fit after self-cal, rms=0.075878Jy sigma=0.655834 ! Inverting map ! Added new window around map position (0.8, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182165 Jy ! Component: 100 - total flux cleaned = 0.0299111 Jy ! Total flux subtracted in 100 components = 0.0299111 Jy ! Clean residual min=-0.007026 max=0.011329 Jy/beam ! Clean residual mean=0.000008 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 0.295388 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.295388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068401Jy sigma=0.580841 ! Fit after self-cal, rms=0.068180Jy sigma=0.578856 ! Inverting map ! Added new window around map position (1.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108911 Jy ! Component: 100 - total flux cleaned = 0.0182297 Jy ! Total flux subtracted in 100 components = 0.0182297 Jy ! Clean residual min=-0.007025 max=0.010422 Jy/beam ! Clean residual mean=0.000008 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.313618 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.313618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065269Jy sigma=0.551463 ! Fit after self-cal, rms=0.065136Jy sigma=0.549991 ! Inverting map ! Added new window around map position (1.2, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00939796 Jy ! Component: 100 - total flux cleaned = 0.0154215 Jy ! Total flux subtracted in 100 components = 0.0154215 Jy ! Clean residual min=-0.006321 max=0.008647 Jy/beam ! Clean residual mean=0.000007 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.329039 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.329039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062993Jy sigma=0.530397 ! Fit after self-cal, rms=0.062880Jy sigma=0.529243 ! Inverting map ! Added new window around map position (-1.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00719698 Jy ! Component: 100 - total flux cleaned = 0.0121167 Jy ! Total flux subtracted in 100 components = 0.0121167 Jy ! Clean residual min=-0.006199 max=0.006316 Jy/beam ! Clean residual mean=0.000007 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.341156 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.341156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061656Jy sigma=0.518596 ! Fit after self-cal, rms=0.061617Jy sigma=0.518293 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.059 mas, bmaj=1.322 mas, bpa=-23.1 degrees ! Estimated noise=0.352541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00903617 Jy ! Component: 100 - total flux cleaned = 0.0154391 Jy ! Component: 150 - total flux cleaned = 0.0206852 Jy ! Component: 200 - total flux cleaned = 0.0250836 Jy ! Total flux subtracted in 200 components = 0.0250836 Jy ! Clean residual min=-0.005104 max=0.005855 Jy/beam ! Clean residual mean=0.000021 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.366239 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 76 components and 0.366239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059731Jy sigma=0.500272 ! Fit after self-cal, rms=0.059634Jy sigma=0.499338 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.059 x 1.322 at -23.1 degrees (North through East) ! Clean map min=-0.0047223 max=0.2796 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.98 KP 1.04 ! LA 1.02 MK 1.03 NL 1.08 OV 0.93 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.99 KP 1.05 ! LA 1.01 MK 1.03 NL 1.08 OV 0.94 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.98 KP 1.06 ! LA 1.02 MK 1.02 NL 1.09 OV 0.94 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.99 KP 1.03 ! LA 1.03 MK 1.02 NL 1.08 OV 0.94 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.99 KP 1.04 ! LA 1.01 MK 1.01 NL 1.09 OV 0.93 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.97 KP 1.04 ! LA 1.02 MK 1.02 NL 1.08 OV 0.86 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.99 KP 1.02 ! LA 1.00 MK 1.03 NL 1.08 OV 0.93 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.98 KP 1.05 ! LA 1.01 MK 1.04 NL 1.06 OV 0.90 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.97 KP 1.03 ! LA 1.00 MK 1.02 NL 1.08 OV 0.93 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.97 KP 1.03 ! LA 1.01 MK 1.03 NL 1.07 OV 0.92 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 0.97 KP 1.04 ! LA 0.99 MK 1.01 NL 1.06 OV 0.93 ! PT 0.90 SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.96 KP 1.04 ! LA 1.02 MK 1.00 NL 1.07 OV 0.93 ! PT 0.90 SC 1.04 ! ! ! Fit before self-cal, rms=0.059634Jy sigma=0.499338 ! Fit after self-cal, rms=0.055671Jy sigma=0.463578 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.07 mas, bmaj=1.331 mas, bpa=-23.12 degrees ! Estimated noise=0.350689 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000619978 Jy ! Component: 100 - total flux cleaned = -0.000799409 Jy ! Component: 150 - total flux cleaned = -0.000690552 Jy ! Component: 200 - total flux cleaned = -0.000786233 Jy ! Total flux subtracted in 200 components = -0.000786233 Jy ! Clean residual min=-0.003025 max=0.003568 Jy/beam ! Clean residual mean=0.000011 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.365453 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.365453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054985Jy sigma=0.457609 ! Fit after self-cal, rms=0.054958Jy sigma=0.457244 ! Inverting map ! Added new window around map position (2.8, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177555 Jy ! Component: 100 - total flux cleaned = 0.00220068 Jy ! Component: 150 - total flux cleaned = 0.00238822 Jy ! Component: 200 - total flux cleaned = 0.00238639 Jy ! Total flux subtracted in 200 components = 0.00238639 Jy ! Clean residual min=-0.003175 max=0.003486 Jy/beam ! Clean residual mean=0.000010 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.36784 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 113 components and 0.36784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054509Jy sigma=0.454221 ! Fit after self-cal, rms=0.054492Jy sigma=0.454094 ! Inverting map ! Added new window around map position (-16.4, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136891 Jy ! Component: 100 - total flux cleaned = 0.00116205 Jy ! Component: 150 - total flux cleaned = 0.00116741 Jy ! Component: 200 - total flux cleaned = 0.00124703 Jy ! Total flux subtracted in 200 components = 0.00124703 Jy ! Clean residual min=-0.002990 max=0.003243 Jy/beam ! Clean residual mean=0.000010 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.369087 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 0.369087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054008Jy sigma=0.451159 ! Fit after self-cal, rms=0.053997Jy sigma=0.451036 ! Inverting map ! Added new window around map position (-10, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267478 Jy ! Component: 100 - total flux cleaned = 0.00320233 Jy ! Component: 150 - total flux cleaned = 0.00336733 Jy ! Component: 200 - total flux cleaned = 0.00337053 Jy ! Total flux subtracted in 200 components = 0.00337053 Jy ! Clean residual min=-0.002797 max=0.002818 Jy/beam ! Clean residual mean=0.000012 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.372457 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 141 components and 0.372457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053639Jy sigma=0.448969 ! Fit after self-cal, rms=0.053631Jy sigma=0.448893 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053631Jy sigma=0.448893 ! Fit after self-cal, rms=0.053050Jy sigma=0.429490 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.067 mas, bmaj=1.338 mas, bpa=-21.38 degrees ! Estimated noise=0.351313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000993222 Jy ! Component: 100 - total flux cleaned = -0.00106142 Jy ! Component: 150 - total flux cleaned = -0.00101029 Jy ! Component: 200 - total flux cleaned = -0.0010917 Jy ! Total flux subtracted in 200 components = -0.0010917 Jy ! Clean residual min=-0.001350 max=0.001307 Jy/beam ! Clean residual mean=0.000006 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.371365 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 159 components and 0.371365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052895Jy sigma=0.428074 ! Fit after self-cal, rms=0.052915Jy sigma=0.427978 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.6, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000527865 Jy ! Component: 100 - total flux cleaned = 0.000688448 Jy ! Component: 150 - total flux cleaned = 0.00072384 Jy ! Component: 200 - total flux cleaned = 0.000757455 Jy ! Total flux subtracted in 200 components = 0.000757455 Jy ! Clean residual min=-0.001217 max=0.001202 Jy/beam ! Clean residual mean=0.000006 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.372123 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 174 components and 0.372123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052849Jy sigma=0.427451 ! Fit after self-cal, rms=0.052846Jy sigma=0.427437 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052846Jy sigma=0.427437 ! Fit after self-cal, rms=0.053215Jy sigma=0.426943 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.067 mas, bmaj=1.34 mas, bpa=-21.15 degrees ! Estimated noise=0.350835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122412 Jy ! Component: 100 - total flux cleaned = -0.00160032 Jy ! Component: 150 - total flux cleaned = -0.00181157 Jy ! Component: 200 - total flux cleaned = -0.00197269 Jy ! Total flux subtracted in 200 components = -0.00197269 Jy ! Clean residual min=-0.001117 max=0.001096 Jy/beam ! Clean residual mean=0.000005 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.37015 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 188 components and 0.37015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053142Jy sigma=0.426357 ! Fit after self-cal, rms=0.053142Jy sigma=0.426340 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.60612e-05 Jy ! Component: 100 - total flux cleaned = -0.00021726 Jy ! Component: 150 - total flux cleaned = -0.000304132 Jy ! Component: 200 - total flux cleaned = -0.00038657 Jy ! Total flux subtracted in 200 components = -0.00038657 Jy ! Clean residual min=-0.001078 max=0.001061 Jy/beam ! Clean residual mean=0.000005 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.369764 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 200 components and 0.369764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053111Jy sigma=0.426072 ! Fit after self-cal, rms=0.053109Jy sigma=0.426064 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053109Jy sigma=0.426064 ! Fit after self-cal, rms=0.053206Jy sigma=0.425930 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.406 mas, bmaj=2.483 mas, bpa=56.98 degrees ! Estimated noise=0.432006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000646707 Jy ! Component: 100 - total flux cleaned = -0.000906281 Jy ! Component: 150 - total flux cleaned = -0.00114765 Jy ! Component: 200 - total flux cleaned = -0.00137434 Jy ! Total flux subtracted in 200 components = -0.00137434 Jy ! Clean residual min=-0.001275 max=0.001386 Jy/beam ! Clean residual mean=0.000009 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.368389 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 215 components and 0.368389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053185Jy sigma=0.425752 ! Fit after self-cal, rms=0.053185Jy sigma=0.425740 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.4, -11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012541 Jy ! Component: 100 - total flux cleaned = 0.00132628 Jy ! Component: 150 - total flux cleaned = 0.00134968 Jy ! Component: 200 - total flux cleaned = 0.00137037 Jy ! Total flux subtracted in 200 components = 0.00137037 Jy ! Clean residual min=-0.001069 max=0.001054 Jy/beam ! Clean residual mean=0.000006 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.36976 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 244 components and 0.36976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053156Jy sigma=0.425560 ! Fit after self-cal, rms=0.053156Jy sigma=0.425546 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.067 mas, bmaj=1.34 mas, bpa=-21.06 degrees ! Estimated noise=0.350443 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.067 x 1.34 at -21.06 degrees (North through East) ! Clean map min=-0.0016231 max=0.27808 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7905 mas, bmaj=1.037 mas, bpa=-24.09 degrees ! Estimated noise=0.852116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218512 Jy ! Component: 100 - total flux cleaned = 0.267572 Jy ! Component: 150 - total flux cleaned = 0.28689 Jy ! Component: 200 - total flux cleaned = 0.299379 Jy ! Total flux subtracted in 200 components = 0.299379 Jy ! Clean residual min=-0.002978 max=0.007009 Jy/beam ! Clean residual mean=0.000005 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.299379 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.299379 Jy ! Inverting map and beam ! Estimated beam: bmin=1.067 mas, bmaj=1.34 mas, bpa=-21.06 degrees ! Estimated noise=0.350443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155619 Jy ! Component: 100 - total flux cleaned = 0.0254893 Jy ! Component: 150 - total flux cleaned = 0.0328426 Jy ! Component: 200 - total flux cleaned = 0.0385778 Jy ! Total flux subtracted in 200 components = 0.0385778 Jy ! Clean residual min=-0.001888 max=0.003651 Jy/beam ! Clean residual mean=0.000015 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.337956 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 57 components and 0.337957 Jy ! Inverting map ! Added new window around map position (-0.4, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046105 Jy ! Component: 100 - total flux cleaned = 0.00832776 Jy ! Component: 150 - total flux cleaned = 0.0113768 Jy ! Component: 200 - total flux cleaned = 0.0139045 Jy ! Total flux subtracted in 200 components = 0.0139045 Jy ! Clean residual min=-0.001355 max=0.001669 Jy/beam ! Clean residual mean=0.000009 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.351861 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 91 components and 0.351861 Jy ! Inverting map ! Added new window around map position (0.2, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213669 Jy ! Component: 100 - total flux cleaned = 0.00395018 Jy ! Component: 150 - total flux cleaned = 0.00554149 Jy ! Component: 200 - total flux cleaned = 0.00695977 Jy ! Total flux subtracted in 200 components = 0.00695977 Jy ! Clean residual min=-0.001189 max=0.001188 Jy/beam ! Clean residual mean=0.000007 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.358821 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 120 components and 0.358821 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.406 mas, bmaj=2.483 mas, bpa=56.98 degrees ! Estimated noise=0.432006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203302 Jy ! Component: 100 - total flux cleaned = 0.00328092 Jy ! Component: 150 - total flux cleaned = 0.00418421 Jy ! Component: 200 - total flux cleaned = 0.00493723 Jy ! Total flux subtracted in 200 components = 0.00493723 Jy ! Clean residual min=-0.001227 max=0.001089 Jy/beam ! Clean residual mean=0.000010 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.363758 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071195 Jy ! Component: 100 - total flux cleaned = 0.00138699 Jy ! Component: 150 - total flux cleaned = 0.00196827 Jy ! Component: 200 - total flux cleaned = 0.00241775 Jy ! Total flux subtracted in 200 components = 0.00241775 Jy ! Clean residual min=-0.001133 max=0.001048 Jy/beam ! Clean residual mean=0.000009 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.366176 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 196 components and 0.366176 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.067 mas, bmaj=1.34 mas, bpa=-21.06 degrees ! Estimated noise=0.350443 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022116 Jy ! Component: 100 - total flux cleaned = 0.000450701 Jy ! Component: 150 - total flux cleaned = 0.000624005 Jy ! Component: 200 - total flux cleaned = 0.000820233 Jy ! Total flux subtracted in 200 components = 0.000820233 Jy ! Clean residual min=-0.000989 max=0.000946 Jy/beam ! Clean residual mean=0.000004 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.366996 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 223 components and 0.366996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053194Jy sigma=0.425467 ! Fit after self-cal, rms=0.053172Jy sigma=0.425261 wmodel J2055+6122_X_map.mod ! Writing 223 model components to file: J2055+6122_X_map.mod wobs J2055+6122_X_uvs.fits ! Writing UV FITS file: J2055+6122_X_uvs.fits wwins J2055+6122_X_map.win ! wwins: Wrote 13 windows to J2055+6122_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000272189 Jy ! Component: 100 - total flux cleaned = -0.00030641 Jy ! Component: 150 - total flux cleaned = -0.000322696 Jy ! Component: 200 - total flux cleaned = -0.000354291 Jy ! Component: 250 - total flux cleaned = -0.000400284 Jy ! Component: 300 - total flux cleaned = -0.000430357 Jy ! Component: 350 - total flux cleaned = -0.000445228 Jy ! Component: 400 - total flux cleaned = -0.000416777 Jy ! Component: 450 - total flux cleaned = -0.000416826 Jy ! Component: 500 - total flux cleaned = -0.000402877 Jy ! Component: 550 - total flux cleaned = -0.000348424 Jy ! Component: 600 - total flux cleaned = -0.000321522 Jy ! Component: 650 - total flux cleaned = -0.000255768 Jy ! Component: 700 - total flux cleaned = -0.000203762 Jy ! Component: 750 - total flux cleaned = -0.000139763 Jy ! Component: 800 - total flux cleaned = -0.000127145 Jy ! Component: 850 - total flux cleaned = -6.42179e-05 Jy ! Component: 900 - total flux cleaned = -2.70587e-05 Jy ! Component: 950 - total flux cleaned = -1.46728e-05 Jy ! Component: 1000 - total flux cleaned = -1.45845e-05 Jy ! Component: 1050 - total flux cleaned = 3.37535e-05 Jy ! Component: 1100 - total flux cleaned = 4.56874e-05 Jy ! Component: 1150 - total flux cleaned = 6.92796e-05 Jy ! Component: 1200 - total flux cleaned = 6.92899e-05 Jy ! Component: 1250 - total flux cleaned = 9.25116e-05 Jy ! Component: 1300 - total flux cleaned = 6.94189e-05 Jy ! Component: 1350 - total flux cleaned = 9.22184e-05 Jy ! Component: 1400 - total flux cleaned = 4.68495e-05 Jy ! Component: 1450 - total flux cleaned = 2.45878e-05 Jy ! Component: 1500 - total flux cleaned = 9.14485e-05 Jy ! Component: 1550 - total flux cleaned = 6.93427e-05 Jy ! Component: 1600 - total flux cleaned = 3.6575e-05 Jy ! Component: 1650 - total flux cleaned = 8.02452e-05 Jy ! Component: 1700 - total flux cleaned = 9.10039e-05 Jy ! Component: 1750 - total flux cleaned = 0.000123156 Jy ! Component: 1800 - total flux cleaned = 0.000144555 Jy ! Component: 1850 - total flux cleaned = 0.000197264 Jy ! Component: 1900 - total flux cleaned = 0.000165798 Jy ! Component: 1950 - total flux cleaned = 0.000228275 Jy ! Component: 2000 - total flux cleaned = 0.000217998 Jy ! Component: 2050 - total flux cleaned = 0.00028984 Jy ! Component: 2100 - total flux cleaned = 0.000300056 Jy ! Component: 2150 - total flux cleaned = 0.000340637 Jy ! Component: 2200 - total flux cleaned = 0.000330559 Jy ! Component: 2250 - total flux cleaned = 0.000390517 Jy ! Component: 2300 - total flux cleaned = 0.000390437 Jy ! Component: 2350 - total flux cleaned = 0.000429849 Jy ! Component: 2400 - total flux cleaned = 0.000429881 Jy ! Component: 2450 - total flux cleaned = 0.000468837 Jy ! Component: 2500 - total flux cleaned = 0.000478378 Jy ! Component: 2550 - total flux cleaned = 0.00050726 Jy ! Component: 2600 - total flux cleaned = 0.000497657 Jy ! Component: 2650 - total flux cleaned = 0.000497661 Jy ! Component: 2700 - total flux cleaned = 0.000488273 Jy ! Component: 2750 - total flux cleaned = 0.000535168 Jy ! Component: 2800 - total flux cleaned = 0.000563159 Jy ! Component: 2850 - total flux cleaned = 0.000581755 Jy ! Component: 2900 - total flux cleaned = 0.000627794 Jy ! Component: 2950 - total flux cleaned = 0.00064603 Jy ! Component: 3000 - total flux cleaned = 0.000655235 Jy ! Component: 3050 - total flux cleaned = 0.00063715 Jy ! Component: 3100 - total flux cleaned = 0.000682217 Jy ! Component: 3150 - total flux cleaned = 0.000673222 Jy ! Component: 3200 - total flux cleaned = 0.000699877 Jy ! Component: 3250 - total flux cleaned = 0.000708751 Jy ! Component: 3300 - total flux cleaned = 0.000708682 Jy ! Component: 3350 - total flux cleaned = 0.00069115 Jy ! Component: 3400 - total flux cleaned = 0.000699953 Jy ! Component: 3450 - total flux cleaned = 0.000734708 Jy ! Component: 3500 - total flux cleaned = 0.000734732 Jy ! Component: 3550 - total flux cleaned = 0.000708921 Jy ! Component: 3600 - total flux cleaned = 0.000708865 Jy ! Component: 3650 - total flux cleaned = 0.000751422 Jy ! Component: 3700 - total flux cleaned = 0.000776892 Jy ! Component: 3750 - total flux cleaned = 0.000759948 Jy ! Component: 3800 - total flux cleaned = 0.000717956 Jy ! Component: 3850 - total flux cleaned = 0.000751348 Jy ! Component: 3900 - total flux cleaned = 0.000718065 Jy ! Component: 3950 - total flux cleaned = 0.000792452 Jy ! Component: 4000 - total flux cleaned = 0.000743085 Jy ! Component: 4050 - total flux cleaned = 0.000718552 Jy ! Total flux subtracted in 4096 components = 0.000718549 Jy ! Clean residual min=-0.000419 max=0.000507 Jy/beam ! Clean residual mean=0.000002 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.367715 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 552 components and 0.367715 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2055+6122_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.067 x 1.34 at -21.06 degrees (North through East) ! Clean map min=-0.00095014 max=0.27932 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2055+6122_X_map.fits wmodel /image_prod/ug002_uva//J2055+6122_X_map.mod ! Writing 552 model components to file: /image_prod/ug002_uva//J2055+6122_X_map.mod wobs /image_prod/ug002_uva//J2055+6122_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2055+6122_X_uvs.fits wwins /image_prod/ug002_uva//J2055+6122_X_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J2055+6122_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.279315 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000142497 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.153049 0.153049 0.306099 0.612198 1.2244 2.44879 4.89758 9.79516 19.5903 39.1807 78.3613 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.279 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1960.15 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2055+6122_X_dfm.log closed on Thu Mar 5 05:01:02 2020