! Started logfile: /image_prod/ug002_uva//J2049-1915_S_dfm.log on Thu Mar 5 04:58:27 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2049-1915_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2049-1915_S_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.884815 visibilities/baseline/integration-bin. ! Found source: J2049-1915 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7167 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2049-1915_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013026Jy sigma=7.412052 ! Fit after self-cal, rms=0.912897Jy sigma=6.666003 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=6.498 mas, bpa=-0.5253 degrees ! Estimated noise=1.84513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0731497 Jy ! Component: 100 - total flux cleaned = 0.0894297 Jy ! Total flux subtracted in 100 components = 0.0894297 Jy ! Clean residual min=-0.005390 max=0.005327 Jy/beam ! Clean residual mean=0.000017 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 0.0894297 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0894297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.097166Jy sigma=0.546003 ! Fit after self-cal, rms=0.096688Jy sigma=0.542365 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=8 mas, bpa=-2.525 degrees ! Estimated noise=1.17768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360613 Jy ! Component: 100 - total flux cleaned = 0.00352657 Jy ! Component: 150 - total flux cleaned = 0.00353223 Jy ! Component: 200 - total flux cleaned = 0.00347906 Jy ! Total flux subtracted in 200 components = 0.00347906 Jy ! Clean residual min=-0.004519 max=0.005020 Jy/beam ! Clean residual mean=0.000038 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.0929087 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 0.0929087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.096533Jy sigma=0.540835 ! Fit after self-cal, rms=0.096538Jy sigma=0.540816 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 8 at -2.525 degrees (North through East) ! Clean map min=-0.0043472 max=0.092846 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.94 KP 0.96 LA 0.99 ! MK 0.94 NL 1.06 OV 1.01 PT 1.14 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.91 KP 0.96 LA 0.99 ! MK 1.01 NL 0.91 OV 0.98 PT 1.20 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.90 KP 0.98 LA 1.03 ! MK 0.98 NL 1.08 OV 0.92 PT 1.17 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.096538Jy sigma=0.540816 ! Fit after self-cal, rms=0.095183Jy sigma=0.536502 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=7.991 mas, bpa=-2.674 degrees ! Estimated noise=1.16891 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.30768e-05 Jy ! Component: 100 - total flux cleaned = -3.71187e-05 Jy ! Component: 150 - total flux cleaned = -0.000100655 Jy ! Component: 200 - total flux cleaned = -0.000100562 Jy ! Total flux subtracted in 200 components = -0.000100562 Jy ! Clean residual min=-0.003703 max=0.003563 Jy/beam ! Clean residual mean=0.000023 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.0928082 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.0928082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095165Jy sigma=0.536271 ! Fit after self-cal, rms=0.095240Jy sigma=0.536045 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095240Jy sigma=0.536045 ! Fit after self-cal, rms=0.095655Jy sigma=0.531725 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=7.967 mas, bpa=-2.907 degrees ! Estimated noise=1.16867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012468 Jy ! Component: 100 - total flux cleaned = 0.000102372 Jy ! Component: 150 - total flux cleaned = 9.29691e-05 Jy ! Component: 200 - total flux cleaned = 0.000101375 Jy ! Total flux subtracted in 200 components = 0.000101375 Jy ! Clean residual min=-0.002628 max=0.002700 Jy/beam ! Clean residual mean=0.000006 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0929096 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.0929096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095650Jy sigma=0.531712 ! Fit after self-cal, rms=0.095739Jy sigma=0.531591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.54421e-06 Jy ! Component: 100 - total flux cleaned = -1.33157e-05 Jy ! Component: 150 - total flux cleaned = -1.35033e-05 Jy ! Component: 200 - total flux cleaned = 7.16358e-07 Jy ! Total flux subtracted in 200 components = 7.16358e-07 Jy ! Clean residual min=-0.002722 max=0.002679 Jy/beam ! Clean residual mean=0.000006 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0929103 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.0929103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095736Jy sigma=0.531583 ! Fit after self-cal, rms=0.095738Jy sigma=0.531580 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095738Jy sigma=0.531580 ! Fit after self-cal, rms=0.095986Jy sigma=0.531568 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=7.956 mas, bpa=-2.887 degrees ! Estimated noise=1.16936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176062 Jy ! Component: 100 - total flux cleaned = 0.00017562 Jy ! Component: 150 - total flux cleaned = 0.000182593 Jy ! Component: 200 - total flux cleaned = 0.000196031 Jy ! Total flux subtracted in 200 components = 0.000196031 Jy ! Clean residual min=-0.002681 max=0.002666 Jy/beam ! Clean residual mean=0.000006 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0931063 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.0931063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095983Jy sigma=0.531561 ! Fit after self-cal, rms=0.095990Jy sigma=0.531558 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.73426e-06 Jy ! Component: 100 - total flux cleaned = 5.2858e-06 Jy ! Component: 150 - total flux cleaned = 1.79117e-05 Jy ! Component: 200 - total flux cleaned = 2.96755e-05 Jy ! Total flux subtracted in 200 components = 2.96755e-05 Jy ! Clean residual min=-0.002682 max=0.002671 Jy/beam ! Clean residual mean=0.000006 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.093136 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.093136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095988Jy sigma=0.531553 ! Fit after self-cal, rms=0.095989Jy sigma=0.531552 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095989Jy sigma=0.531552 ! Fit after self-cal, rms=0.095961Jy sigma=0.531548 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.912 mas, bmaj=18.71 mas, bpa=-1.912 degrees ! Estimated noise=1.47622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.41938e-05 Jy ! Component: 100 - total flux cleaned = 6.91402e-05 Jy ! Component: 150 - total flux cleaned = 9.61959e-05 Jy ! Component: 200 - total flux cleaned = 0.000107959 Jy ! Total flux subtracted in 200 components = 0.000107959 Jy ! Clean residual min=-0.002665 max=0.002848 Jy/beam ! Clean residual mean=0.000011 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.0932439 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.0932439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095960Jy sigma=0.531550 ! Fit after self-cal, rms=0.095958Jy sigma=0.531543 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.93598e-05 Jy ! Component: 100 - total flux cleaned = 6.68382e-06 Jy ! Component: 150 - total flux cleaned = 1.87202e-05 Jy ! Component: 200 - total flux cleaned = 4.04299e-05 Jy ! Total flux subtracted in 200 components = 4.04299e-05 Jy ! Clean residual min=-0.002661 max=0.002827 Jy/beam ! Clean residual mean=0.000011 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.0932843 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.0932843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095958Jy sigma=0.531556 ! Fit after self-cal, rms=0.095957Jy sigma=0.531551 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=7.946 mas, bpa=-2.87 degrees ! Estimated noise=1.16956 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.188 x 7.946 at -2.87 degrees (North through East) ! Clean map min=-0.0026068 max=0.091956 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=6.478 mas, bpa=-0.9451 degrees ! Estimated noise=1.79494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0715634 Jy ! Component: 100 - total flux cleaned = 0.0874281 Jy ! Component: 150 - total flux cleaned = 0.0921387 Jy ! Component: 200 - total flux cleaned = 0.0926589 Jy ! Total flux subtracted in 200 components = 0.0926589 Jy ! Clean residual min=-0.004132 max=0.003706 Jy/beam ! Clean residual mean=0.000003 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.0926589 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0926589 Jy ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=7.946 mas, bpa=-2.87 degrees ! Estimated noise=1.16956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (88, -127.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200477 Jy ! Component: 100 - total flux cleaned = 0.00242075 Jy ! Component: 150 - total flux cleaned = 0.00251731 Jy ! Component: 200 - total flux cleaned = 0.00263346 Jy ! Total flux subtracted in 200 components = 0.00263346 Jy ! Clean residual min=-0.002805 max=0.001908 Jy/beam ! Clean residual mean=0.000007 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0952924 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.0952924 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.912 mas, bmaj=18.71 mas, bpa=-1.912 degrees ! Estimated noise=1.47622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146107 Jy ! Component: 100 - total flux cleaned = -0.00023345 Jy ! Component: 150 - total flux cleaned = -0.000260447 Jy ! Component: 200 - total flux cleaned = -0.000282193 Jy ! Total flux subtracted in 200 components = -0.000282193 Jy ! Clean residual min=-0.002747 max=0.002237 Jy/beam ! Clean residual mean=0.000012 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.0950102 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.11003e-05 Jy ! Component: 100 - total flux cleaned = -3.88076e-05 Jy ! Component: 150 - total flux cleaned = -5.55048e-05 Jy ! Component: 200 - total flux cleaned = -7.05541e-05 Jy ! Total flux subtracted in 200 components = -7.05541e-05 Jy ! Clean residual min=-0.002745 max=0.002195 Jy/beam ! Clean residual mean=0.000012 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.0949397 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.0949397 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=7.946 mas, bpa=-2.87 degrees ! Estimated noise=1.16956 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.7242e-05 Jy ! Component: 100 - total flux cleaned = 1.74256e-05 Jy ! Component: 150 - total flux cleaned = 1.8229e-05 Jy ! Component: 200 - total flux cleaned = 1.81585e-05 Jy ! Total flux subtracted in 200 components = 1.81585e-05 Jy ! Clean residual min=-0.002630 max=0.001947 Jy/beam ! Clean residual mean=0.000006 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.0949578 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.0949578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095873Jy sigma=0.531200 ! Fit after self-cal, rms=0.095844Jy sigma=0.531066 wmodel J2049-1915_S_map.mod ! Writing 59 model components to file: J2049-1915_S_map.mod wobs J2049-1915_S_uvs.fits ! Writing UV FITS file: J2049-1915_S_uvs.fits wwins J2049-1915_S_map.win ! wwins: Wrote 2 windows to J2049-1915_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116626 Jy ! Component: 100 - total flux cleaned = -0.00220641 Jy ! Component: 150 - total flux cleaned = -0.00316698 Jy ! Component: 200 - total flux cleaned = -0.00378297 Jy ! Component: 250 - total flux cleaned = -0.00416271 Jy ! Component: 300 - total flux cleaned = -0.00446239 Jy ! Component: 350 - total flux cleaned = -0.00475303 Jy ! Component: 400 - total flux cleaned = -0.00506562 Jy ! Component: 450 - total flux cleaned = -0.00533825 Jy ! Component: 500 - total flux cleaned = -0.00548579 Jy ! Component: 550 - total flux cleaned = -0.00565852 Jy ! Component: 600 - total flux cleaned = -0.00579875 Jy ! Component: 650 - total flux cleaned = -0.00588076 Jy ! Component: 700 - total flux cleaned = -0.00601443 Jy ! Component: 750 - total flux cleaned = -0.00609317 Jy ! Component: 800 - total flux cleaned = -0.00619599 Jy ! Component: 850 - total flux cleaned = -0.00624642 Jy ! Component: 900 - total flux cleaned = -0.00629595 Jy ! Component: 950 - total flux cleaned = -0.00634483 Jy ! Component: 1000 - total flux cleaned = -0.00639271 Jy ! Component: 1050 - total flux cleaned = -0.00641628 Jy ! Component: 1100 - total flux cleaned = -0.0065088 Jy ! Component: 1150 - total flux cleaned = -0.00657693 Jy ! Component: 1200 - total flux cleaned = -0.00662167 Jy ! Component: 1250 - total flux cleaned = -0.00664365 Jy ! Component: 1300 - total flux cleaned = -0.00666558 Jy ! Component: 1350 - total flux cleaned = -0.00677363 Jy ! Component: 1400 - total flux cleaned = -0.00677358 Jy ! Component: 1450 - total flux cleaned = -0.00683694 Jy ! Component: 1500 - total flux cleaned = -0.00696213 Jy ! Component: 1550 - total flux cleaned = -0.00700321 Jy ! Component: 1600 - total flux cleaned = -0.00706439 Jy ! Component: 1650 - total flux cleaned = -0.00716498 Jy ! Component: 1700 - total flux cleaned = -0.00720475 Jy ! Component: 1750 - total flux cleaned = -0.00726381 Jy ! Component: 1800 - total flux cleaned = -0.00728342 Jy ! Component: 1850 - total flux cleaned = -0.00732206 Jy ! Component: 1900 - total flux cleaned = -0.00737935 Jy ! Component: 1950 - total flux cleaned = -0.00736057 Jy ! Component: 2000 - total flux cleaned = -0.00743548 Jy ! Component: 2050 - total flux cleaned = -0.0073985 Jy ! Component: 2100 - total flux cleaned = -0.00743501 Jy ! Component: 2150 - total flux cleaned = -0.00739844 Jy ! Component: 2200 - total flux cleaned = -0.00734433 Jy ! Component: 2250 - total flux cleaned = -0.00739813 Jy ! Component: 2300 - total flux cleaned = -0.00743345 Jy ! Component: 2350 - total flux cleaned = -0.0074156 Jy ! Component: 2400 - total flux cleaned = -0.00745043 Jy ! Component: 2450 - total flux cleaned = -0.00745029 Jy ! Component: 2500 - total flux cleaned = -0.00750173 Jy ! Component: 2550 - total flux cleaned = -0.00750176 Jy ! Component: 2600 - total flux cleaned = -0.0075187 Jy ! Component: 2650 - total flux cleaned = -0.00755229 Jy ! Component: 2700 - total flux cleaned = -0.00758568 Jy ! Component: 2750 - total flux cleaned = -0.00761853 Jy ! Component: 2800 - total flux cleaned = -0.00761853 Jy ! Component: 2850 - total flux cleaned = -0.00766729 Jy ! Component: 2900 - total flux cleaned = -0.00768335 Jy ! Component: 2950 - total flux cleaned = -0.00763514 Jy ! Component: 3000 - total flux cleaned = -0.00769918 Jy ! Component: 3050 - total flux cleaned = -0.00773088 Jy ! Component: 3100 - total flux cleaned = -0.00774654 Jy ! Component: 3150 - total flux cleaned = -0.00777798 Jy ! Component: 3200 - total flux cleaned = -0.00774672 Jy ! Component: 3250 - total flux cleaned = -0.0077467 Jy ! Component: 3300 - total flux cleaned = -0.00780853 Jy ! Component: 3350 - total flux cleaned = -0.00780846 Jy ! Component: 3400 - total flux cleaned = -0.00783906 Jy ! Component: 3450 - total flux cleaned = -0.00785415 Jy ! Component: 3500 - total flux cleaned = -0.0078542 Jy ! Component: 3550 - total flux cleaned = -0.00789937 Jy ! Component: 3600 - total flux cleaned = -0.00788426 Jy ! Component: 3650 - total flux cleaned = -0.00789926 Jy ! Component: 3700 - total flux cleaned = -0.00792895 Jy ! Component: 3750 - total flux cleaned = -0.00789934 Jy ! Component: 3800 - total flux cleaned = -0.00791421 Jy ! Component: 3850 - total flux cleaned = -0.007929 Jy ! Component: 3900 - total flux cleaned = -0.00797294 Jy ! Component: 3950 - total flux cleaned = -0.00795822 Jy ! Component: 4000 - total flux cleaned = -0.00792913 Jy ! Component: 4050 - total flux cleaned = -0.00792915 Jy ! Total flux subtracted in 4096 components = -0.00790019 Jy ! Clean residual min=-0.000898 max=0.000987 Jy/beam ! Clean residual mean=0.000003 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.0870576 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 351 components and 0.0870577 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2049-1915_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.188 x 7.946 at -2.87 degrees (North through East) ! Clean map min=-0.0021249 max=0.091649 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2049-1915_S_map.fits wmodel /image_prod/ug002_uva//J2049-1915_S_map.mod ! Writing 351 model components to file: /image_prod/ug002_uva//J2049-1915_S_map.mod wobs /image_prod/ug002_uva//J2049-1915_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2049-1915_S_uvs.fits wwins /image_prod/ug002_uva//J2049-1915_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J2049-1915_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0916494 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000252647 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.827 0.827 1.654 3.308 6.616 13.232 26.464 52.928 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.091 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 362.757 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2049-1915_S_dfm.log closed on Thu Mar 5 04:58:31 2020