! Started logfile: /image_prod/ug002_uva//J2047-2849_S_dfm.log on Thu Mar  5 04:58:06 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2047-2849_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2047-2849_S_uva.fits
! AN table 1: 50 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.887222 visibilities/baseline/integration-bin.
! Found source: J2047-2849
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4791 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2047-2849_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003195Jy  sigma=6.395522
! Fit after  self-cal, rms=0.864797Jy  sigma=5.453801
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.422 mas, bmaj=6.529 mas, bpa=-2.88 degrees
! Estimated noise=2.68367 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102569 Jy
! Component: 100  -  total flux cleaned = 0.137321 Jy
! Total flux subtracted in 100 components = 0.137321 Jy
! Clean residual min=-0.012910 max=0.030692 Jy/beam
! Clean residual mean=0.000014 rms=0.003650 Jy/beam
! Combined flux in latest and established models = 0.137321 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.137321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090983Jy  sigma=0.535927
! Fit after  self-cal, rms=0.090753Jy  sigma=0.535043
! Inverting map 
! Added new window around map position (-3.5, 4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0276567 Jy
! Component: 100  -  total flux cleaned = 0.0422576 Jy
! Total flux subtracted in 100 components = 0.0422576 Jy
! Clean residual min=-0.007570 max=0.016153 Jy/beam
! Clean residual mean=0.000015 rms=0.002142 Jy/beam
! Combined flux in latest and established models = 0.179578 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 0.179578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082086Jy  sigma=0.455394
! Fit after  self-cal, rms=0.081018Jy  sigma=0.449554
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116733 Jy
! Component: 100  -  total flux cleaned = 0.0170879 Jy
! Total flux subtracted in 100 components = 0.0170879 Jy
! Clean residual min=-0.006657 max=0.008461 Jy/beam
! Clean residual mean=0.000015 rms=0.001618 Jy/beam
! Combined flux in latest and established models = 0.196666 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 20 components and 0.196666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079580Jy  sigma=0.435504
! Fit after  self-cal, rms=0.079271Jy  sigma=0.433651
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.962 mas, bmaj=7.726 mas, bpa=-2.296 degrees
! Estimated noise=1.65772 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0056055 Jy
! Component: 100  -  total flux cleaned = 0.00695065 Jy
! Component: 150  -  total flux cleaned = 0.0071315 Jy
! Component: 200  -  total flux cleaned = 0.00720786 Jy
! Total flux subtracted in 200 components = 0.00720786 Jy
! Clean residual min=-0.004170 max=0.005461 Jy/beam
! Clean residual mean=0.000007 rms=0.001132 Jy/beam
! Combined flux in latest and established models = 0.203874 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 32 components and 0.203874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078881Jy  sigma=0.430113
! Fit after  self-cal, rms=0.078837Jy  sigma=0.429846
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.962 x 7.726 at -2.296 degrees (North through East)
! Clean map  min=-0.0038504  max=0.12845 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.10     KP        0.96     
!   LA        1.02     MK        0.98     NL        1.07     PT        0.95     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.32     FD        1.01     HN        0.99     KP        0.95     
!   LA        1.00     MK        0.95     NL        1.03     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.14     KP        0.95     
!   LA        1.00     MK        0.97     NL        1.09     PT        0.97     
!   SC        0.95     
! 
! 
! Fit before self-cal, rms=0.078837Jy  sigma=0.429846
! Fit after  self-cal, rms=0.081840Jy  sigma=0.424045
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.935 mas, bmaj=7.681 mas, bpa=-2.229 degrees
! Estimated noise=1.65286 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000411263 Jy
! Component: 100  -  total flux cleaned = 7.79892e-05 Jy
! Component: 150  -  total flux cleaned = -0.00019718 Jy
! Component: 200  -  total flux cleaned = -0.000472772 Jy
! Total flux subtracted in 200 components = -0.000472772 Jy
! Clean residual min=-0.003135 max=0.003566 Jy/beam
! Clean residual mean=-0.000005 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.203401 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 46 components and 0.203401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081725Jy  sigma=0.423502
! Fit after  self-cal, rms=0.081804Jy  sigma=0.423385
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081804Jy  sigma=0.423385
! Fit after  self-cal, rms=0.082446Jy  sigma=0.421859
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.931 mas, bmaj=7.646 mas, bpa=-2.112 degrees
! Estimated noise=1.64961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00010301 Jy
! Component: 100  -  total flux cleaned = -0.00028794 Jy
! Component: 150  -  total flux cleaned = -0.000397809 Jy
! Component: 200  -  total flux cleaned = -0.000491556 Jy
! Total flux subtracted in 200 components = -0.000491556 Jy
! Clean residual min=-0.002662 max=0.002948 Jy/beam
! Clean residual mean=-0.000006 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.20291 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 56 components and 0.20291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082393Jy  sigma=0.421606
! Fit after  self-cal, rms=0.082396Jy  sigma=0.421571
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.30421e-06 Jy
! Component: 100  -  total flux cleaned = -0.000111024 Jy
! Component: 150  -  total flux cleaned = -0.000187229 Jy
! Component: 200  -  total flux cleaned = -0.00025489 Jy
! Total flux subtracted in 200 components = -0.00025489 Jy
! Clean residual min=-0.002681 max=0.002889 Jy/beam
! Clean residual mean=-0.000006 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.202655 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 60 components and 0.202655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082368Jy  sigma=0.421478
! Fit after  self-cal, rms=0.082368Jy  sigma=0.421459
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082368Jy  sigma=0.421459
! Fit after  self-cal, rms=0.082786Jy  sigma=0.421301
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.929 mas, bmaj=7.629 mas, bpa=-2.016 degrees
! Estimated noise=1.64649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000277709 Jy
! Component: 100  -  total flux cleaned = -0.000361068 Jy
! Component: 150  -  total flux cleaned = -0.000408996 Jy
! Component: 200  -  total flux cleaned = -0.000474239 Jy
! Total flux subtracted in 200 components = -0.000474239 Jy
! Clean residual min=-0.002591 max=0.002750 Jy/beam
! Clean residual mean=-0.000006 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.202181 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 67 components and 0.202181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082762Jy  sigma=0.421213
! Fit after  self-cal, rms=0.082767Jy  sigma=0.421200
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.09045e-05 Jy
! Component: 100  -  total flux cleaned = -9.38225e-05 Jy
! Component: 150  -  total flux cleaned = -0.00013127 Jy
! Component: 200  -  total flux cleaned = -0.000165703 Jy
! Total flux subtracted in 200 components = -0.000165703 Jy
! Clean residual min=-0.002577 max=0.002736 Jy/beam
! Clean residual mean=-0.000006 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.202015 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 69 components and 0.202015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082750Jy  sigma=0.421159
! Fit after  self-cal, rms=0.082751Jy  sigma=0.421147
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082751Jy  sigma=0.421147
! Fit after  self-cal, rms=0.083011Jy  sigma=0.421130
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.322 mas, bmaj=19.87 mas, bpa=4.5 degrees
! Estimated noise=2.10584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000202905 Jy
! Component: 100  -  total flux cleaned = -0.000189802 Jy
! Component: 150  -  total flux cleaned = -0.00021359 Jy
! Component: 200  -  total flux cleaned = -0.000224051 Jy
! Total flux subtracted in 200 components = -0.000224051 Jy
! Clean residual min=-0.002498 max=0.002344 Jy/beam
! Clean residual mean=-0.000014 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.201791 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 73 components and 0.201791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083010Jy  sigma=0.421121
! Fit after  self-cal, rms=0.083013Jy  sigma=0.421117
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.12597e-06 Jy
! Component: 100  -  total flux cleaned = 3.9182e-06 Jy
! Component: 150  -  total flux cleaned = 4.21704e-06 Jy
! Component: 200  -  total flux cleaned = -5.75269e-06 Jy
! Total flux subtracted in 200 components = -5.75269e-06 Jy
! Clean residual min=-0.002485 max=0.002332 Jy/beam
! Clean residual mean=-0.000014 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.201785 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 76 components and 0.201785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083013Jy  sigma=0.421118
! Fit after  self-cal, rms=0.083011Jy  sigma=0.421115
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.929 mas, bmaj=7.624 mas, bpa=-1.941 degrees
! Estimated noise=1.64599 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.929 x 7.624 at -1.941 degrees (North through East)
! Clean map  min=-0.002457  max=0.1278 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.399 mas, bmaj=6.464 mas, bpa=-2.629 degrees
! Estimated noise=2.654 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103222 Jy
! Component: 100  -  total flux cleaned = 0.143621 Jy
! Component: 150  -  total flux cleaned = 0.166621 Jy
! Component: 200  -  total flux cleaned = 0.180645 Jy
! Total flux subtracted in 200 components = 0.180645 Jy
! Clean residual min=-0.006218 max=0.007908 Jy/beam
! Clean residual mean=0.000002 rms=0.001624 Jy/beam
! Combined flux in latest and established models = 0.180645 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.180645 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.929 mas, bmaj=7.624 mas, bpa=-1.941 degrees
! Estimated noise=1.64599 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110291 Jy
! Component: 100  -  total flux cleaned = 0.0167496 Jy
! Component: 150  -  total flux cleaned = 0.0194915 Jy
! Component: 200  -  total flux cleaned = 0.0198617 Jy
! Total flux subtracted in 200 components = 0.0198617 Jy
! Clean residual min=-0.003068 max=0.003559 Jy/beam
! Clean residual mean=-0.000008 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.200507 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.200507 Jy
! Inverting map 
! Added new window around map position (-4.5, -17).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196438 Jy
! Component: 100  -  total flux cleaned = 0.00203707 Jy
! Component: 150  -  total flux cleaned = 0.00216463 Jy
! Component: 200  -  total flux cleaned = 0.00222055 Jy
! Total flux subtracted in 200 components = 0.00222055 Jy
! Clean residual min=-0.002794 max=0.002646 Jy/beam
! Clean residual mean=-0.000006 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.202727 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 50 components and 0.202727 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.322 mas, bmaj=19.87 mas, bpa=4.5 degrees
! Estimated noise=2.10584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.84083e-05 Jy
! Component: 100  -  total flux cleaned = -3.59636e-05 Jy
! Component: 150  -  total flux cleaned = -0.000112451 Jy
! Component: 200  -  total flux cleaned = -0.000134799 Jy
! Total flux subtracted in 200 components = -0.000134799 Jy
! Clean residual min=-0.002297 max=0.002432 Jy/beam
! Clean residual mean=-0.000015 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.202592 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.28278e-07 Jy
! Component: 100  -  total flux cleaned = -1.9883e-05 Jy
! Component: 150  -  total flux cleaned = -3.81571e-05 Jy
! Component: 200  -  total flux cleaned = -3.80532e-05 Jy
! Total flux subtracted in 200 components = -3.80532e-05 Jy
! Clean residual min=-0.002311 max=0.002419 Jy/beam
! Clean residual mean=-0.000016 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.202554 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 0.202554 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.929 mas, bmaj=7.624 mas, bpa=-1.941 degrees
! Estimated noise=1.64599 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.70321e-05 Jy
! Component: 100  -  total flux cleaned = 1.45655e-05 Jy
! Component: 150  -  total flux cleaned = 1.72703e-05 Jy
! Component: 200  -  total flux cleaned = 1.99082e-05 Jy
! Total flux subtracted in 200 components = 1.99082e-05 Jy
! Clean residual min=-0.002721 max=0.002646 Jy/beam
! Clean residual mean=-0.000007 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.202574 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.202574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082990Jy  sigma=0.421027
! Fit after  self-cal, rms=0.082981Jy  sigma=0.420961
wmodel J2047-2849_S_map.mod
! Writing 81 model components to file: J2047-2849_S_map.mod
wobs   J2047-2849_S_uvs.fits
! Writing UV FITS file: J2047-2849_S_uvs.fits
wwins  J2047-2849_S_map.win
! wwins: Wrote 3 windows to J2047-2849_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000206981 Jy
! Component: 100  -  total flux cleaned = -0.000116262 Jy
! Component: 150  -  total flux cleaned = -3.14281e-05 Jy
! Component: 200  -  total flux cleaned = 9.26133e-05 Jy
! Component: 250  -  total flux cleaned = 0.00013137 Jy
! Component: 300  -  total flux cleaned = 9.2544e-05 Jy
! Component: 350  -  total flux cleaned = -1.88962e-05 Jy
! Component: 400  -  total flux cleaned = 5.438e-05 Jy
! Component: 450  -  total flux cleaned = 0.000161276 Jy
! Component: 500  -  total flux cleaned = 0.000160008 Jy
! Component: 550  -  total flux cleaned = 5.76123e-05 Jy
! Component: 600  -  total flux cleaned = 2.44087e-05 Jy
! Component: 650  -  total flux cleaned = -8.27902e-06 Jy
! Component: 700  -  total flux cleaned = 8.77088e-05 Jy
! Component: 750  -  total flux cleaned = 2.47078e-05 Jy
! Component: 800  -  total flux cleaned = 0.000117517 Jy
! Component: 850  -  total flux cleaned = 0.000238951 Jy
! Component: 900  -  total flux cleaned = 0.000298726 Jy
! Component: 950  -  total flux cleaned = 0.000415791 Jy
! Component: 1000  -  total flux cleaned = 0.000444176 Jy
! Component: 1050  -  total flux cleaned = 0.000500606 Jy
! Component: 1100  -  total flux cleaned = 0.000583744 Jy
! Component: 1150  -  total flux cleaned = 0.000528645 Jy
! Component: 1200  -  total flux cleaned = 0.00060974 Jy
! Component: 1250  -  total flux cleaned = 0.000636095 Jy
! Component: 1300  -  total flux cleaned = 0.000609886 Jy
! Component: 1350  -  total flux cleaned = 0.000661647 Jy
! Component: 1400  -  total flux cleaned = 0.000636013 Jy
! Component: 1450  -  total flux cleaned = 0.000661426 Jy
! Component: 1500  -  total flux cleaned = 0.000711428 Jy
! Component: 1550  -  total flux cleaned = 0.000686885 Jy
! Component: 1600  -  total flux cleaned = 0.000759451 Jy
! Component: 1650  -  total flux cleaned = 0.000806831 Jy
! Component: 1700  -  total flux cleaned = 0.000830496 Jy
! Component: 1750  -  total flux cleaned = 0.000830587 Jy
! Component: 1800  -  total flux cleaned = 0.000738982 Jy
! Component: 1850  -  total flux cleaned = 0.000716406 Jy
! Component: 1900  -  total flux cleaned = 0.000626888 Jy
! Component: 1950  -  total flux cleaned = 0.000671242 Jy
! Component: 2000  -  total flux cleaned = 0.000627669 Jy
! Component: 2050  -  total flux cleaned = 0.000605862 Jy
! Component: 2100  -  total flux cleaned = 0.000477632 Jy
! Component: 2150  -  total flux cleaned = 0.000499173 Jy
! Component: 2200  -  total flux cleaned = 0.000499112 Jy
! Component: 2250  -  total flux cleaned = 0.000416394 Jy
! Component: 2300  -  total flux cleaned = 0.000375524 Jy
! Component: 2350  -  total flux cleaned = 0.000375632 Jy
! Component: 2400  -  total flux cleaned = 0.000355385 Jy
! Component: 2450  -  total flux cleaned = 0.000295548 Jy
! Component: 2500  -  total flux cleaned = 0.000216929 Jy
! Component: 2550  -  total flux cleaned = 0.000158508 Jy
! Component: 2600  -  total flux cleaned = 0.000177741 Jy
! Component: 2650  -  total flux cleaned = 0.000120093 Jy
! Component: 2700  -  total flux cleaned = 4.42858e-05 Jy
! Component: 2750  -  total flux cleaned = 6.29309e-05 Jy
! Component: 2800  -  total flux cleaned = 7.06496e-06 Jy
! Component: 2850  -  total flux cleaned = -2.99433e-05 Jy
! Component: 2900  -  total flux cleaned = -6.64492e-05 Jy
! Component: 2950  -  total flux cleaned = -6.62348e-05 Jy
! Component: 3000  -  total flux cleaned = -0.00010215 Jy
! Component: 3050  -  total flux cleaned = -8.43874e-05 Jy
! Component: 3100  -  total flux cleaned = -0.000137334 Jy
! Component: 3150  -  total flux cleaned = -0.000189653 Jy
! Component: 3200  -  total flux cleaned = -0.000224507 Jy
! Component: 3250  -  total flux cleaned = -0.000258709 Jy
! Component: 3300  -  total flux cleaned = -0.000326733 Jy
! Component: 3350  -  total flux cleaned = -0.000360469 Jy
! Component: 3400  -  total flux cleaned = -0.000377264 Jy
! Component: 3450  -  total flux cleaned = -0.000443648 Jy
! Component: 3500  -  total flux cleaned = -0.000410814 Jy
! Component: 3550  -  total flux cleaned = -0.000476229 Jy
! Component: 3600  -  total flux cleaned = -0.000508557 Jy
! Component: 3650  -  total flux cleaned = -0.000572752 Jy
! Component: 3700  -  total flux cleaned = -0.000541044 Jy
! Component: 3750  -  total flux cleaned = -0.000541145 Jy
! Component: 3800  -  total flux cleaned = -0.000651333 Jy
! Component: 3850  -  total flux cleaned = -0.000651457 Jy
! Component: 3900  -  total flux cleaned = -0.00063617 Jy
! Component: 3950  -  total flux cleaned = -0.00066706 Jy
! Component: 4000  -  total flux cleaned = -0.00068231 Jy
! Component: 4050  -  total flux cleaned = -0.000697524 Jy
! Total flux subtracted in 4096 components = -0.000712539 Jy
! Clean residual min=-0.000950 max=0.000869 Jy/beam
! Clean residual mean=-0.000006 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.201862 Jy
keep
! Adding 226 model components to the UV plane model.
! The established model now contains 307 components and 0.201862 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2047-2849_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.929 x 7.624 at -1.941 degrees (North through East)
! Clean map  min=-0.00188  max=0.12665 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2047-2849_S_map.fits
wmodel /image_prod/ug002_uva//J2047-2849_S_map.mod
! Writing 307 model components to file: /image_prod/ug002_uva//J2047-2849_S_map.mod
wobs   /image_prod/ug002_uva//J2047-2849_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2047-2849_S_uvs.fits
wwins  /image_prod/ug002_uva//J2047-2849_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2047-2849_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.126647 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000254793 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.603551 0.603551 1.2071 2.4142 4.8284 9.65681 19.3136 38.6272 77.2545
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.126 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  497.058 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2047-2849_S_dfm.log closed on Thu Mar  5 04:58:09 2020