! Started logfile: /image_prod/ug002_uva//J2042-2223_S_dfm.log on Thu Mar 5 04:56:01 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2042-2223_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2042-2223_S_uva.fits ! AN table 1: 50 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.999444 visibilities/baseline/integration-bin. ! Found source: J2042-2223 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 5397 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2042-2223_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.016693Jy sigma=6.826545 ! Fit after self-cal, rms=0.864194Jy sigma=5.773189 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=7.113 mas, bpa=-2.249 degrees ! Estimated noise=2.24542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106103 Jy ! Component: 100 - total flux cleaned = 0.131472 Jy ! Total flux subtracted in 100 components = 0.131472 Jy ! Clean residual min=-0.008445 max=0.011845 Jy/beam ! Clean residual mean=-0.000002 rms=0.002237 Jy/beam ! Combined flux in latest and established models = 0.131472 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.131472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085580Jy sigma=0.498263 ! Fit after self-cal, rms=0.085588Jy sigma=0.498214 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=7.996 mas, bpa=-1.31 degrees ! Estimated noise=1.50042 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162582 Jy ! Component: 100 - total flux cleaned = 0.0251721 Jy ! Component: 150 - total flux cleaned = 0.0304208 Jy ! Component: 200 - total flux cleaned = 0.03383 Jy ! Total flux subtracted in 200 components = 0.03383 Jy ! Clean residual min=-0.004200 max=0.006346 Jy/beam ! Clean residual mean=-0.000023 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.165302 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 0.165302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082404Jy sigma=0.474817 ! Fit after self-cal, rms=0.082196Jy sigma=0.472865 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 7.996 at -1.31 degrees (North through East) ! Clean map min=-0.0039674 max=0.13752 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.08 HN 1.09 KP 0.96 ! LA 0.96 MK 1.01 NL 1.02 OV 0.95 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.08 HN 1.10 KP 0.98 ! LA 1.01 MK 0.99 NL 1.00 OV 0.92 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.09 HN 1.07 KP 0.93 ! LA 0.99 MK 1.00 NL 0.97 OV 0.96 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.082196Jy sigma=0.472865 ! Fit after self-cal, rms=0.080804Jy sigma=0.467885 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=7.917 mas, bpa=-0.612 degrees ! Estimated noise=1.48541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276801 Jy ! Component: 100 - total flux cleaned = 0.00292279 Jy ! Component: 150 - total flux cleaned = 0.00269755 Jy ! Component: 200 - total flux cleaned = 0.00249963 Jy ! Total flux subtracted in 200 components = 0.00249963 Jy ! Clean residual min=-0.003867 max=0.003766 Jy/beam ! Clean residual mean=-0.000017 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.167802 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.167802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080643Jy sigma=0.467096 ! Fit after self-cal, rms=0.080643Jy sigma=0.466915 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080643Jy sigma=0.466915 ! Fit after self-cal, rms=0.080698Jy sigma=0.463025 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=7.9 mas, bpa=-0.5848 degrees ! Estimated noise=1.48894 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181788 Jy ! Component: 100 - total flux cleaned = 0.00239007 Jy ! Component: 150 - total flux cleaned = 0.00242479 Jy ! Component: 200 - total flux cleaned = 0.002392 Jy ! Total flux subtracted in 200 components = 0.002392 Jy ! Clean residual min=-0.003083 max=0.002967 Jy/beam ! Clean residual mean=-0.000007 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.170194 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.170194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080634Jy sigma=0.462726 ! Fit after self-cal, rms=0.080637Jy sigma=0.462667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472848 Jy ! Component: 100 - total flux cleaned = 0.000410115 Jy ! Component: 150 - total flux cleaned = 0.000352499 Jy ! Component: 200 - total flux cleaned = 0.000326319 Jy ! Total flux subtracted in 200 components = 0.000326319 Jy ! Clean residual min=-0.003054 max=0.003001 Jy/beam ! Clean residual mean=-0.000007 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.17052 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 59 components and 0.17052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080610Jy sigma=0.462553 ! Fit after self-cal, rms=0.080610Jy sigma=0.462544 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080610Jy sigma=0.462544 ! Fit after self-cal, rms=0.081066Jy sigma=0.461481 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=7.895 mas, bpa=-0.5727 degrees ! Estimated noise=1.48657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00077299 Jy ! Component: 100 - total flux cleaned = 0.00086171 Jy ! Component: 150 - total flux cleaned = 0.000861591 Jy ! Component: 200 - total flux cleaned = 0.000862513 Jy ! Total flux subtracted in 200 components = 0.000862513 Jy ! Clean residual min=-0.002668 max=0.002933 Jy/beam ! Clean residual mean=-0.000000 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.171382 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.171382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081045Jy sigma=0.461364 ! Fit after self-cal, rms=0.081055Jy sigma=0.461339 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279004 Jy ! Component: 100 - total flux cleaned = 0.00395219 Jy ! Component: 150 - total flux cleaned = 0.00443959 Jy ! Component: 200 - total flux cleaned = 0.0047733 Jy ! Total flux subtracted in 200 components = 0.0047733 Jy ! Clean residual min=-0.002404 max=0.002207 Jy/beam ! Clean residual mean=0.000002 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.176156 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 94 components and 0.176156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080952Jy sigma=0.460502 ! Fit after self-cal, rms=0.080950Jy sigma=0.460469 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080950Jy sigma=0.460469 ! Fit after self-cal, rms=0.080901Jy sigma=0.460441 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.123 mas, bmaj=16.73 mas, bpa=3.448 degrees ! Estimated noise=1.80989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124479 Jy ! Component: 100 - total flux cleaned = 0.00183625 Jy ! Component: 150 - total flux cleaned = 0.00216034 Jy ! Component: 200 - total flux cleaned = 0.0023899 Jy ! Total flux subtracted in 200 components = 0.0023899 Jy ! Clean residual min=-0.002031 max=0.002321 Jy/beam ! Clean residual mean=0.000006 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.178546 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.178546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080887Jy sigma=0.460354 ! Fit after self-cal, rms=0.080889Jy sigma=0.460343 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427494 Jy ! Component: 100 - total flux cleaned = 0.000458934 Jy ! Component: 150 - total flux cleaned = 0.000501894 Jy ! Component: 200 - total flux cleaned = 0.000529128 Jy ! Total flux subtracted in 200 components = 0.000529128 Jy ! Clean residual min=-0.001984 max=0.002272 Jy/beam ! Clean residual mean=0.000006 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.179075 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 126 components and 0.179075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080883Jy sigma=0.460331 ! Fit after self-cal, rms=0.080882Jy sigma=0.460329 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.895 mas, bpa=-0.5328 degrees ! Estimated noise=1.48322 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.021 x 7.895 at -0.5328 degrees (North through East) ! Clean map min=-0.0022125 max=0.13615 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.474 mas, bmaj=7.015 mas, bpa=-1.467 degrees ! Estimated noise=2.2247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104991 Jy ! Component: 100 - total flux cleaned = 0.130244 Jy ! Component: 150 - total flux cleaned = 0.143526 Jy ! Component: 200 - total flux cleaned = 0.152368 Jy ! Total flux subtracted in 200 components = 0.152368 Jy ! Clean residual min=-0.005581 max=0.005834 Jy/beam ! Clean residual mean=0.000013 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.152368 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.152368 Jy ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.895 mas, bpa=-0.5328 degrees ! Estimated noise=1.48322 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0082618 Jy ! Component: 100 - total flux cleaned = 0.0130033 Jy ! Component: 150 - total flux cleaned = 0.0162947 Jy ! Component: 200 - total flux cleaned = 0.0187794 Jy ! Total flux subtracted in 200 components = 0.0187794 Jy ! Clean residual min=-0.002714 max=0.002478 Jy/beam ! Clean residual mean=0.000001 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.171148 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 52 components and 0.171148 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.123 mas, bmaj=16.73 mas, bpa=3.448 degrees ! Estimated noise=1.80989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308117 Jy ! Component: 100 - total flux cleaned = 0.0049005 Jy ! Component: 150 - total flux cleaned = 0.00566491 Jy ! Component: 200 - total flux cleaned = 0.00631373 Jy ! Total flux subtracted in 200 components = 0.00631373 Jy ! Clean residual min=-0.002206 max=0.002255 Jy/beam ! Clean residual mean=0.000005 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.177461 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000450305 Jy ! Component: 100 - total flux cleaned = 0.00078156 Jy ! Component: 150 - total flux cleaned = 0.000929496 Jy ! Component: 200 - total flux cleaned = 0.0010846 Jy ! Total flux subtracted in 200 components = 0.0010846 Jy ! Clean residual min=-0.002053 max=0.002192 Jy/beam ! Clean residual mean=0.000005 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.178546 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 100 components and 0.178546 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.895 mas, bpa=-0.5328 degrees ! Estimated noise=1.48322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000397547 Jy ! Component: 100 - total flux cleaned = -0.000483855 Jy ! Component: 150 - total flux cleaned = -0.00044555 Jy ! Component: 200 - total flux cleaned = -0.000481466 Jy ! Total flux subtracted in 200 components = -0.000481466 Jy ! Clean residual min=-0.002395 max=0.002221 Jy/beam ! Clean residual mean=0.000003 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.178064 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 116 components and 0.178065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080901Jy sigma=0.460427 ! Fit after self-cal, rms=0.080896Jy sigma=0.460389 wmodel J2042-2223_S_map.mod ! Writing 116 model components to file: J2042-2223_S_map.mod wobs J2042-2223_S_uvs.fits ! Writing UV FITS file: J2042-2223_S_uvs.fits wwins J2042-2223_S_map.win ! wwins: Wrote 3 windows to J2042-2223_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000394458 Jy ! Component: 100 - total flux cleaned = -0.000394019 Jy ! Component: 150 - total flux cleaned = -0.000504071 Jy ! Component: 200 - total flux cleaned = -0.000643743 Jy ! Component: 250 - total flux cleaned = -0.000778476 Jy ! Component: 300 - total flux cleaned = -0.000940289 Jy ! Component: 350 - total flux cleaned = -0.00106505 Jy ! Component: 400 - total flux cleaned = -0.00103473 Jy ! Component: 450 - total flux cleaned = -0.00109429 Jy ! Component: 500 - total flux cleaned = -0.00109495 Jy ! Component: 550 - total flux cleaned = -0.00109494 Jy ! Component: 600 - total flux cleaned = -0.00115002 Jy ! Component: 650 - total flux cleaned = -0.00130984 Jy ! Component: 700 - total flux cleaned = -0.00130973 Jy ! Component: 750 - total flux cleaned = -0.0013357 Jy ! Component: 800 - total flux cleaned = -0.00133592 Jy ! Component: 850 - total flux cleaned = -0.00136064 Jy ! Component: 900 - total flux cleaned = -0.00133645 Jy ! Component: 950 - total flux cleaned = -0.00133655 Jy ! Component: 1000 - total flux cleaned = -0.00140638 Jy ! Component: 1050 - total flux cleaned = -0.00135996 Jy ! Component: 1100 - total flux cleaned = -0.00142774 Jy ! Component: 1150 - total flux cleaned = -0.00147217 Jy ! Component: 1200 - total flux cleaned = -0.00156008 Jy ! Component: 1250 - total flux cleaned = -0.00164662 Jy ! Component: 1300 - total flux cleaned = -0.00168933 Jy ! Component: 1350 - total flux cleaned = -0.00183738 Jy ! Component: 1400 - total flux cleaned = -0.00189988 Jy ! Component: 1450 - total flux cleaned = -0.00202306 Jy ! Component: 1500 - total flux cleaned = -0.00204331 Jy ! Component: 1550 - total flux cleaned = -0.0021237 Jy ! Component: 1600 - total flux cleaned = -0.00220283 Jy ! Component: 1650 - total flux cleaned = -0.00224201 Jy ! Component: 1700 - total flux cleaned = -0.00239689 Jy ! Component: 1750 - total flux cleaned = -0.00237757 Jy ! Component: 1800 - total flux cleaned = -0.00241545 Jy ! Component: 1850 - total flux cleaned = -0.00249014 Jy ! Component: 1900 - total flux cleaned = -0.00249009 Jy ! Component: 1950 - total flux cleaned = -0.00258179 Jy ! Component: 2000 - total flux cleaned = -0.00265423 Jy ! Component: 2050 - total flux cleaned = -0.00269014 Jy ! Component: 2100 - total flux cleaned = -0.00272592 Jy ! Component: 2150 - total flux cleaned = -0.00274369 Jy ! Component: 2200 - total flux cleaned = -0.00279584 Jy ! Component: 2250 - total flux cleaned = -0.00286455 Jy ! Component: 2300 - total flux cleaned = -0.00284745 Jy ! Component: 2350 - total flux cleaned = -0.00288125 Jy ! Component: 2400 - total flux cleaned = -0.00291449 Jy ! Component: 2450 - total flux cleaned = -0.00288121 Jy ! Component: 2500 - total flux cleaned = -0.0028484 Jy ! Component: 2550 - total flux cleaned = -0.00281595 Jy ! Component: 2600 - total flux cleaned = -0.00281619 Jy ! Component: 2650 - total flux cleaned = -0.00280042 Jy ! Component: 2700 - total flux cleaned = -0.00278456 Jy ! Component: 2750 - total flux cleaned = -0.00272158 Jy ! Component: 2800 - total flux cleaned = -0.00267467 Jy ! Component: 2850 - total flux cleaned = -0.00267483 Jy ! Component: 2900 - total flux cleaned = -0.00265924 Jy ! Component: 2950 - total flux cleaned = -0.00258256 Jy ! Component: 3000 - total flux cleaned = -0.00255236 Jy ! Component: 3050 - total flux cleaned = -0.00258255 Jy ! Component: 3100 - total flux cleaned = -0.00258258 Jy ! Component: 3150 - total flux cleaned = -0.00252316 Jy ! Component: 3200 - total flux cleaned = -0.00252324 Jy ! Component: 3250 - total flux cleaned = -0.00252323 Jy ! Component: 3300 - total flux cleaned = -0.00250865 Jy ! Component: 3350 - total flux cleaned = -0.0025087 Jy ! Component: 3400 - total flux cleaned = -0.00248026 Jy ! Component: 3450 - total flux cleaned = -0.00246599 Jy ! Component: 3500 - total flux cleaned = -0.00246598 Jy ! Component: 3550 - total flux cleaned = -0.00245178 Jy ! Component: 3600 - total flux cleaned = -0.00239616 Jy ! Component: 3650 - total flux cleaned = -0.00242385 Jy ! Component: 3700 - total flux cleaned = -0.00243749 Jy ! Component: 3750 - total flux cleaned = -0.00241017 Jy ! Component: 3800 - total flux cleaned = -0.00234277 Jy ! Component: 3850 - total flux cleaned = -0.00231591 Jy ! Component: 3900 - total flux cleaned = -0.00234251 Jy ! Component: 3950 - total flux cleaned = -0.0023028 Jy ! Component: 4000 - total flux cleaned = -0.00234213 Jy ! Component: 4050 - total flux cleaned = -0.00232893 Jy ! Total flux subtracted in 4096 components = -0.00228999 Jy ! Clean residual min=-0.000853 max=0.000780 Jy/beam ! Clean residual mean=0.000002 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.175775 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 380 components and 0.175775 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2042-2223_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.021 x 7.895 at -0.5328 degrees (North through East) ! Clean map min=-0.0016439 max=0.13646 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2042-2223_S_map.fits wmodel /image_prod/ug002_uva//J2042-2223_S_map.mod ! Writing 380 model components to file: /image_prod/ug002_uva//J2042-2223_S_map.mod wobs /image_prod/ug002_uva//J2042-2223_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2042-2223_S_uvs.fits wwins /image_prod/ug002_uva//J2042-2223_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2042-2223_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.13646 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000219821 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.483265 0.483265 0.96653 1.93306 3.86612 7.73224 15.4645 30.929 61.8579 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.136 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 620.777 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2042-2223_S_dfm.log closed on Thu Mar 5 04:56:04 2020