! Started logfile: /image_prod/ug002_uva//J2035+1056_X_dfm.log on Thu Mar 5 04:52:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2035+1056_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2035+1056_X_uva.fits ! AN table 1: 45 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.954762 visibilities/baseline/integration-bin. ! Found source: J2035+1056 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 14436 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2035+1056_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.173402Jy sigma=8.007091 ! Fit after self-cal, rms=0.415536Jy sigma=2.936811 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6155 mas, bmaj=1.535 mas, bpa=-4.249 degrees ! Estimated noise=1.47284 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.443024 Jy ! Component: 100 - total flux cleaned = 0.566659 Jy ! Total flux subtracted in 100 components = 0.566659 Jy ! Clean residual min=-0.028513 max=0.054402 Jy/beam ! Clean residual mean=0.000009 rms=0.005152 Jy/beam ! Combined flux in latest and established models = 0.566659 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.566659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130983Jy sigma=0.855330 ! Fit after self-cal, rms=0.130760Jy sigma=0.853407 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583666 Jy ! Component: 100 - total flux cleaned = 0.0862772 Jy ! Total flux subtracted in 100 components = 0.0862772 Jy ! Clean residual min=-0.023426 max=0.026479 Jy/beam ! Clean residual mean=0.000007 rms=0.003730 Jy/beam ! Combined flux in latest and established models = 0.652936 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 7 components and 0.652936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097639Jy sigma=0.648044 ! Fit after self-cal, rms=0.097403Jy sigma=0.646209 ! Inverting map ! Added new window around map position (2, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219588 Jy ! Component: 100 - total flux cleaned = 0.0357468 Jy ! Total flux subtracted in 100 components = 0.0357468 Jy ! Clean residual min=-0.020094 max=0.025127 Jy/beam ! Clean residual mean=0.000007 rms=0.003434 Jy/beam ! Combined flux in latest and established models = 0.688683 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.688683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091213Jy sigma=0.606933 ! Fit after self-cal, rms=0.090784Jy sigma=0.603939 ! Inverting map ! Added new window around map position (-1.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197758 Jy ! Component: 100 - total flux cleaned = 0.0320448 Jy ! Total flux subtracted in 100 components = 0.0320448 Jy ! Clean residual min=-0.017329 max=0.015539 Jy/beam ! Clean residual mean=0.000007 rms=0.003127 Jy/beam ! Combined flux in latest and established models = 0.720728 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.720728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086024Jy sigma=0.569681 ! Fit after self-cal, rms=0.085865Jy sigma=0.568567 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7478 mas, bmaj=1.742 mas, bpa=-3.552 degrees ! Estimated noise=0.871348 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117603 Jy ! Component: 100 - total flux cleaned = 0.0201425 Jy ! Component: 150 - total flux cleaned = 0.0266765 Jy ! Component: 200 - total flux cleaned = 0.0312866 Jy ! Total flux subtracted in 200 components = 0.0312866 Jy ! Clean residual min=-0.014367 max=0.013999 Jy/beam ! Clean residual mean=0.000008 rms=0.003187 Jy/beam ! Combined flux in latest and established models = 0.752014 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.752015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083532Jy sigma=0.554076 ! Fit after self-cal, rms=0.083493Jy sigma=0.553816 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7478 x 1.742 at -3.552 degrees (North through East) ! Clean map min=-0.013478 max=0.58803 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.89 LA 1.05 MK 1.02 ! NL 1.09 OV 0.93 PT 0.93 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.89 LA 1.05 MK 1.02 ! NL 1.09 OV 0.94 PT 0.95 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.89 LA 1.06 MK 1.02 ! NL 1.10 OV 0.94 PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.90 LA 1.07 MK 1.03 ! NL 1.10 OV 0.96 PT 0.95 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.90 LA 1.06 MK 1.01 ! NL 1.08 OV 0.94 PT 0.96 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.91 LA 1.06 MK 1.04 ! NL 1.09 OV 0.94 PT 0.97 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.92 LA 1.06 MK 1.08 ! NL 1.09 OV 0.96 PT 0.95 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.92 LA 1.07 MK 1.07 ! NL 1.10 OV 0.93 PT 0.96 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.93 LA 1.06 MK 1.10 ! NL 1.08 OV 0.93 PT 0.98 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.89 LA 1.06 MK 1.07 ! NL 1.12 OV 0.96 PT 0.97 SC 1.05 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.93 LA 1.07 MK 1.06 ! NL 1.11 OV 0.94 PT 0.98 SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.90 LA 1.06 MK 1.07 ! NL 1.11 OV 0.94 PT 0.97 SC 1.05 ! ! ! Fit before self-cal, rms=0.083493Jy sigma=0.553816 ! Fit after self-cal, rms=0.065150Jy sigma=0.431320 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7532 mas, bmaj=1.752 mas, bpa=-3.473 degrees ! Estimated noise=0.877442 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.014009 Jy ! Component: 100 - total flux cleaned = -0.0205666 Jy ! Component: 150 - total flux cleaned = -0.0219024 Jy ! Component: 200 - total flux cleaned = -0.0222747 Jy ! Total flux subtracted in 200 components = -0.0222747 Jy ! Clean residual min=-0.006172 max=0.008143 Jy/beam ! Clean residual mean=-0.000004 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.72974 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.72974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062241Jy sigma=0.411807 ! Fit after self-cal, rms=0.062232Jy sigma=0.411599 ! Inverting map ! Added new window around map position (-0.4, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0071463 Jy ! Component: 100 - total flux cleaned = 0.00826053 Jy ! Component: 150 - total flux cleaned = 0.00798431 Jy ! Component: 200 - total flux cleaned = 0.00760868 Jy ! Total flux subtracted in 200 components = 0.00760868 Jy ! Clean residual min=-0.004954 max=0.007597 Jy/beam ! Clean residual mean=-0.000005 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.737349 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 69 components and 0.737349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061091Jy sigma=0.404024 ! Fit after self-cal, rms=0.060984Jy sigma=0.403298 ! Inverting map ! Added new window around map position (5.8, -39.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550877 Jy ! Component: 100 - total flux cleaned = 0.00632916 Jy ! Component: 150 - total flux cleaned = 0.00599249 Jy ! Component: 200 - total flux cleaned = 0.00548094 Jy ! Total flux subtracted in 200 components = 0.00548094 Jy ! Clean residual min=-0.004615 max=0.006042 Jy/beam ! Clean residual mean=-0.000005 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.74283 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 85 components and 0.74283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060340Jy sigma=0.399066 ! Fit after self-cal, rms=0.060318Jy sigma=0.398889 ! Inverting map ! Added new window around map position (0.6, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327145 Jy ! Component: 100 - total flux cleaned = 0.00480011 Jy ! Component: 150 - total flux cleaned = 0.00502003 Jy ! Component: 200 - total flux cleaned = 0.00531093 Jy ! Total flux subtracted in 200 components = 0.00531093 Jy ! Clean residual min=-0.004178 max=0.004602 Jy/beam ! Clean residual mean=-0.000005 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.748141 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 100 components and 0.748141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059719Jy sigma=0.395184 ! Fit after self-cal, rms=0.059682Jy sigma=0.394934 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059682Jy sigma=0.394934 ! Fit after self-cal, rms=0.058323Jy sigma=0.386001 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7529 mas, bmaj=1.75 mas, bpa=-3.529 degrees ! Estimated noise=0.877139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00345501 Jy ! Component: 100 - total flux cleaned = -0.00575261 Jy ! Component: 150 - total flux cleaned = -0.00700743 Jy ! Component: 200 - total flux cleaned = -0.00812586 Jy ! Total flux subtracted in 200 components = -0.00812586 Jy ! Clean residual min=-0.002975 max=0.003467 Jy/beam ! Clean residual mean=-0.000001 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.740015 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 117 components and 0.740015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058014Jy sigma=0.384019 ! Fit after self-cal, rms=0.058013Jy sigma=0.383990 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267431 Jy ! Component: 100 - total flux cleaned = 0.00276909 Jy ! Component: 150 - total flux cleaned = 0.00277037 Jy ! Component: 200 - total flux cleaned = 0.00238021 Jy ! Total flux subtracted in 200 components = 0.00238021 Jy ! Clean residual min=-0.002680 max=0.002982 Jy/beam ! Clean residual mean=-0.000001 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.742395 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 142 components and 0.742395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057779Jy sigma=0.382484 ! Fit after self-cal, rms=0.057771Jy sigma=0.382398 ! Inverting map ! Added new window around map position (22, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264135 Jy ! Component: 100 - total flux cleaned = 0.00291436 Jy ! Component: 150 - total flux cleaned = 0.00285795 Jy ! Component: 200 - total flux cleaned = 0.00285575 Jy ! Total flux subtracted in 200 components = 0.00285575 Jy ! Clean residual min=-0.002598 max=0.002676 Jy/beam ! Clean residual mean=-0.000001 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.745251 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 162 components and 0.745251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057603Jy sigma=0.381288 ! Fit after self-cal, rms=0.057598Jy sigma=0.381257 ! Inverting map ! Added new window around map position (1.8, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013056 Jy ! Component: 100 - total flux cleaned = 0.00147466 Jy ! Component: 150 - total flux cleaned = 0.00157715 Jy ! Component: 200 - total flux cleaned = 0.00167322 Jy ! Total flux subtracted in 200 components = 0.00167322 Jy ! Clean residual min=-0.002548 max=0.002229 Jy/beam ! Clean residual mean=-0.000001 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.746924 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 179 components and 0.746924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057473Jy sigma=0.380407 ! Fit after self-cal, rms=0.057469Jy sigma=0.380376 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057469Jy sigma=0.380376 ! Fit after self-cal, rms=0.057332Jy sigma=0.379717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7529 mas, bmaj=1.749 mas, bpa=-3.521 degrees ! Estimated noise=0.876644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000814352 Jy ! Component: 100 - total flux cleaned = -0.000989069 Jy ! Component: 150 - total flux cleaned = -0.000986018 Jy ! Component: 200 - total flux cleaned = -0.000939282 Jy ! Total flux subtracted in 200 components = -0.000939282 Jy ! Clean residual min=-0.002373 max=0.001994 Jy/beam ! Clean residual mean=0.000000 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.745984 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 189 components and 0.745985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057232Jy sigma=0.379051 ! Fit after self-cal, rms=0.057232Jy sigma=0.379041 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.86923e-06 Jy ! Component: 100 - total flux cleaned = -4.96769e-06 Jy ! Component: 150 - total flux cleaned = -5.86681e-06 Jy ! Component: 200 - total flux cleaned = -7.96964e-05 Jy ! Total flux subtracted in 200 components = -7.96964e-05 Jy ! Clean residual min=-0.002342 max=0.001925 Jy/beam ! Clean residual mean=0.000000 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.745905 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 202 components and 0.745905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057184Jy sigma=0.378707 ! Fit after self-cal, rms=0.057183Jy sigma=0.378700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057183Jy sigma=0.378700 ! Fit after self-cal, rms=0.057144Jy sigma=0.378588 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.764 mas, bmaj=2.851 mas, bpa=-2.23 degrees ! Estimated noise=1.25838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357293 Jy ! Component: 100 - total flux cleaned = 0.000354916 Jy ! Component: 150 - total flux cleaned = 0.000264969 Jy ! Component: 200 - total flux cleaned = 0.000265949 Jy ! Total flux subtracted in 200 components = 0.000265949 Jy ! Clean residual min=-0.003136 max=0.002821 Jy/beam ! Clean residual mean=0.000000 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.746171 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 218 components and 0.746171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057128Jy sigma=0.378459 ! Fit after self-cal, rms=0.057124Jy sigma=0.378426 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.45709e-05 Jy ! Component: 100 - total flux cleaned = 5.24171e-05 Jy ! Component: 150 - total flux cleaned = 1.86615e-05 Jy ! Component: 200 - total flux cleaned = 5.15967e-05 Jy ! Total flux subtracted in 200 components = 5.15967e-05 Jy ! Clean residual min=-0.003122 max=0.002644 Jy/beam ! Clean residual mean=0.000001 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.746222 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 233 components and 0.746222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057121Jy sigma=0.378410 ! Fit after self-cal, rms=0.057120Jy sigma=0.378399 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7528 mas, bmaj=1.749 mas, bpa=-3.505 degrees ! Estimated noise=0.876315 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7528 x 1.749 at -3.505 degrees (North through East) ! Clean map min=-0.0026503 max=0.5888 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057120Jy sigma=0.378399 ! Fit after self-cal, rms=0.052658Jy sigma=0.344261 ! Inverting map and beam ! Estimated beam: bmin=0.7529 mas, bmaj=1.749 mas, bpa=-3.501 degrees ! Estimated noise=0.876699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000273802 Jy ! Component: 100 - total flux cleaned = -0.000624196 Jy ! Component: 150 - total flux cleaned = -0.000820571 Jy ! Component: 200 - total flux cleaned = -0.00100115 Jy ! Total flux subtracted in 200 components = -0.00100115 Jy ! Clean residual min=-0.002130 max=0.001771 Jy/beam ! Clean residual mean=0.000000 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.745221 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 241 components and 0.745221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052597Jy sigma=0.343860 ! Fit after self-cal, rms=0.052597Jy sigma=0.343855 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142096 Jy ! Component: 100 - total flux cleaned = -0.000207959 Jy ! Component: 150 - total flux cleaned = -0.000269615 Jy ! Component: 200 - total flux cleaned = -0.000268269 Jy ! Total flux subtracted in 200 components = -0.000268269 Jy ! Clean residual min=-0.002092 max=0.001748 Jy/beam ! Clean residual mean=0.000000 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.744953 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 251 components and 0.744953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052564Jy sigma=0.343630 ! Fit after self-cal, rms=0.052564Jy sigma=0.343626 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052564Jy sigma=0.343626 ! Fit after self-cal, rms=0.052550Jy sigma=0.343579 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6202 mas, bmaj=1.54 mas, bpa=-4.25 degrees ! Estimated noise=1.48547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.446506 Jy ! Component: 100 - total flux cleaned = 0.569774 Jy ! Component: 150 - total flux cleaned = 0.6268 Jy ! Component: 200 - total flux cleaned = 0.654043 Jy ! Total flux subtracted in 200 components = 0.654043 Jy ! Clean residual min=-0.008094 max=0.012186 Jy/beam ! Clean residual mean=0.000002 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.654043 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.654043 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7529 mas, bmaj=1.749 mas, bpa=-3.49 degrees ! Estimated noise=0.876514 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167627 Jy ! Component: 100 - total flux cleaned = 0.0271078 Jy ! Component: 150 - total flux cleaned = 0.034852 Jy ! Component: 200 - total flux cleaned = 0.0411284 Jy ! Total flux subtracted in 200 components = 0.0411284 Jy ! Clean residual min=-0.004642 max=0.005804 Jy/beam ! Clean residual mean=-0.000004 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.695171 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 40 components and 0.695171 Jy ! Inverting map ! Added new window around map position (-0.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593765 Jy ! Component: 100 - total flux cleaned = 0.010684 Jy ! Component: 150 - total flux cleaned = 0.014927 Jy ! Component: 200 - total flux cleaned = 0.0187535 Jy ! Total flux subtracted in 200 components = 0.0187535 Jy ! Clean residual min=-0.003831 max=0.003944 Jy/beam ! Clean residual mean=-0.000003 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.713925 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 70 components and 0.713925 Jy ! Inverting map ! Added new window around map position (8.4, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388368 Jy ! Component: 100 - total flux cleaned = 0.00680377 Jy ! Component: 150 - total flux cleaned = 0.00902747 Jy ! Component: 200 - total flux cleaned = 0.0112008 Jy ! Total flux subtracted in 200 components = 0.0112008 Jy ! Clean residual min=-0.003196 max=0.003031 Jy/beam ! Clean residual mean=-0.000001 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.725126 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 87 components and 0.725126 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.765 mas, bmaj=2.851 mas, bpa=-2.213 degrees ! Estimated noise=1.25847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00484094 Jy ! Component: 100 - total flux cleaned = 0.00830911 Jy ! Component: 150 - total flux cleaned = 0.0108991 Jy ! Component: 200 - total flux cleaned = 0.011994 Jy ! Total flux subtracted in 200 components = 0.011994 Jy ! Clean residual min=-0.003818 max=0.003159 Jy/beam ! Clean residual mean=-0.000002 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.73712 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000803987 Jy ! Component: 100 - total flux cleaned = 0.00138456 Jy ! Component: 150 - total flux cleaned = 0.00197662 Jy ! Component: 200 - total flux cleaned = 0.00251844 Jy ! Total flux subtracted in 200 components = 0.00251844 Jy ! Clean residual min=-0.003378 max=0.002643 Jy/beam ! Clean residual mean=-0.000001 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.739638 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 153 components and 0.739638 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7529 mas, bmaj=1.749 mas, bpa=-3.49 degrees ! Estimated noise=0.876514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206325 Jy ! Component: 100 - total flux cleaned = 0.000130424 Jy ! Component: 150 - total flux cleaned = 0.000358671 Jy ! Component: 200 - total flux cleaned = 0.000712816 Jy ! Total flux subtracted in 200 components = 0.000712816 Jy ! Clean residual min=-0.002609 max=0.002352 Jy/beam ! Clean residual mean=0.000000 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.740351 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 178 components and 0.740351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052941Jy sigma=0.346539 ! Fit after self-cal, rms=0.052907Jy sigma=0.346271 wmodel J2035+1056_X_map.mod ! Writing 178 model components to file: J2035+1056_X_map.mod wobs J2035+1056_X_uvs.fits ! Writing UV FITS file: J2035+1056_X_uvs.fits wwins J2035+1056_X_map.win ! wwins: Wrote 11 windows to J2035+1056_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000415534 Jy ! Component: 100 - total flux cleaned = -0.000860966 Jy ! Component: 150 - total flux cleaned = -0.00123901 Jy ! Component: 200 - total flux cleaned = -0.00148966 Jy ! Component: 250 - total flux cleaned = -0.00183169 Jy ! Component: 300 - total flux cleaned = -0.00202907 Jy ! Component: 350 - total flux cleaned = -0.00202845 Jy ! Component: 400 - total flux cleaned = -0.00205965 Jy ! Component: 450 - total flux cleaned = -0.00215129 Jy ! Component: 500 - total flux cleaned = -0.00229966 Jy ! Component: 550 - total flux cleaned = -0.00224143 Jy ! Component: 600 - total flux cleaned = -0.00238255 Jy ! Component: 650 - total flux cleaned = -0.00240979 Jy ! Component: 700 - total flux cleaned = -0.00241015 Jy ! Component: 750 - total flux cleaned = -0.00248952 Jy ! Component: 800 - total flux cleaned = -0.00243732 Jy ! Component: 850 - total flux cleaned = -0.00241109 Jy ! Component: 900 - total flux cleaned = -0.00243576 Jy ! Component: 950 - total flux cleaned = -0.00238615 Jy ! Component: 1000 - total flux cleaned = -0.00241095 Jy ! Component: 1050 - total flux cleaned = -0.0024587 Jy ! Component: 1100 - total flux cleaned = -0.00259989 Jy ! Component: 1150 - total flux cleaned = -0.00248419 Jy ! Component: 1200 - total flux cleaned = -0.00252989 Jy ! Component: 1250 - total flux cleaned = -0.00250725 Jy ! Component: 1300 - total flux cleaned = -0.00248526 Jy ! Component: 1350 - total flux cleaned = -0.00248528 Jy ! Component: 1400 - total flux cleaned = -0.00259317 Jy ! Component: 1450 - total flux cleaned = -0.00263511 Jy ! Component: 1500 - total flux cleaned = -0.00261376 Jy ! Component: 1550 - total flux cleaned = -0.00263431 Jy ! Component: 1600 - total flux cleaned = -0.00263462 Jy ! Component: 1650 - total flux cleaned = -0.00279542 Jy ! Component: 1700 - total flux cleaned = -0.00269596 Jy ! Component: 1750 - total flux cleaned = -0.00275526 Jy ! Component: 1800 - total flux cleaned = -0.00285198 Jy ! Component: 1850 - total flux cleaned = -0.00290897 Jy ! Component: 1900 - total flux cleaned = -0.00296555 Jy ! Component: 1950 - total flux cleaned = -0.00303992 Jy ! Component: 2000 - total flux cleaned = -0.00298497 Jy ! Component: 2050 - total flux cleaned = -0.00309466 Jy ! Component: 2100 - total flux cleaned = -0.00322105 Jy ! Component: 2150 - total flux cleaned = -0.00329237 Jy ! Component: 2200 - total flux cleaned = -0.00336264 Jy ! Component: 2250 - total flux cleaned = -0.00329313 Jy ! Component: 2300 - total flux cleaned = -0.00339701 Jy ! Component: 2350 - total flux cleaned = -0.00341396 Jy ! Component: 2400 - total flux cleaned = -0.00334673 Jy ! Component: 2450 - total flux cleaned = -0.00346388 Jy ! Component: 2500 - total flux cleaned = -0.0034307 Jy ! Component: 2550 - total flux cleaned = -0.00349634 Jy ! Component: 2600 - total flux cleaned = -0.00351224 Jy ! Component: 2650 - total flux cleaned = -0.00349611 Jy ! Component: 2700 - total flux cleaned = -0.00351205 Jy ! Component: 2750 - total flux cleaned = -0.0035436 Jy ! Component: 2800 - total flux cleaned = -0.00355935 Jy ! Component: 2850 - total flux cleaned = -0.00365211 Jy ! Component: 2900 - total flux cleaned = -0.0036061 Jy ! Component: 2950 - total flux cleaned = -0.00360591 Jy ! Component: 3000 - total flux cleaned = -0.00362081 Jy ! Component: 3050 - total flux cleaned = -0.00356113 Jy ! Component: 3100 - total flux cleaned = -0.00360543 Jy ! Component: 3150 - total flux cleaned = -0.00354715 Jy ! Component: 3200 - total flux cleaned = -0.00351826 Jy ! Component: 3250 - total flux cleaned = -0.0036476 Jy ! Component: 3300 - total flux cleaned = -0.0035906 Jy ! Component: 3350 - total flux cleaned = -0.00364699 Jy ! Component: 3400 - total flux cleaned = -0.00360502 Jy ! Component: 3450 - total flux cleaned = -0.00361858 Jy ! Component: 3500 - total flux cleaned = -0.00360483 Jy ! Component: 3550 - total flux cleaned = -0.00359108 Jy ! Component: 3600 - total flux cleaned = -0.00355039 Jy ! Component: 3650 - total flux cleaned = -0.00353712 Jy ! Component: 3700 - total flux cleaned = -0.00359057 Jy ! Component: 3750 - total flux cleaned = -0.00355105 Jy ! Component: 3800 - total flux cleaned = -0.00353785 Jy ! Component: 3850 - total flux cleaned = -0.00353787 Jy ! Component: 3900 - total flux cleaned = -0.0034864 Jy ! Component: 3950 - total flux cleaned = -0.00342258 Jy ! Component: 4000 - total flux cleaned = -0.00347341 Jy ! Component: 4050 - total flux cleaned = -0.00343566 Jy ! Total flux subtracted in 4096 components = -0.00344823 Jy ! Clean residual min=-0.000647 max=0.000735 Jy/beam ! Clean residual mean=0.000000 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.736903 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 498 components and 0.736902 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2035+1056_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7529 x 1.749 at -3.49 degrees (North through East) ! Clean map min=-0.0017188 max=0.59147 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2035+1056_X_map.fits wmodel /image_prod/ug002_uva//J2035+1056_X_map.mod ! Writing 498 model components to file: /image_prod/ug002_uva//J2035+1056_X_map.mod wobs /image_prod/ug002_uva//J2035+1056_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2035+1056_X_uvs.fits wwins /image_prod/ug002_uva//J2035+1056_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J2035+1056_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.591469 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213885 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.108485 0.108485 0.21697 0.43394 0.86788 1.73576 3.47152 6.94304 13.8861 27.7722 55.5443 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.591 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2765.36 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2035+1056_X_dfm.log closed on Thu Mar 5 04:52:52 2020