! Started logfile: /image_prod/ug002_uva//J2031+1219_X_h_dfm.log on Thu Mar 5 04:50:33 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2031+1219_X_h_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2031+1219_X_h_uva.fits ! AN table 1: 18 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.875 visibilities/baseline/integration-bin. ! Found source: J2031+1219 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 5292 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2031+1219_X_h] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.190186Jy sigma=8.017176 ! Fit after self-cal, rms=0.450249Jy sigma=3.419023 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5966 mas, bmaj=1.515 mas, bpa=-4.065 degrees ! Estimated noise=1.95012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.433826 Jy ! Component: 100 - total flux cleaned = 0.60836 Jy ! Total flux subtracted in 100 components = 0.60836 Jy ! Clean residual min=-0.039273 max=0.076898 Jy/beam ! Clean residual mean=-0.000013 rms=0.006629 Jy/beam ! Combined flux in latest and established models = 0.60836 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.60836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.178613Jy sigma=1.127523 ! Fit after self-cal, rms=0.177534Jy sigma=1.116098 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0857855 Jy ! Component: 100 - total flux cleaned = 0.128369 Jy ! Total flux subtracted in 100 components = 0.128369 Jy ! Clean residual min=-0.019875 max=0.025057 Jy/beam ! Clean residual mean=-0.000005 rms=0.003993 Jy/beam ! Combined flux in latest and established models = 0.736729 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.736729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114334Jy sigma=0.731606 ! Fit after self-cal, rms=0.113777Jy sigma=0.725016 ! Inverting map ! Added new window around map position (2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287816 Jy ! Component: 100 - total flux cleaned = 0.0478079 Jy ! Total flux subtracted in 100 components = 0.0478079 Jy ! Clean residual min=-0.019193 max=0.022143 Jy/beam ! Clean residual mean=-0.000002 rms=0.003493 Jy/beam ! Combined flux in latest and established models = 0.784537 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.784537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102086Jy sigma=0.658206 ! Fit after self-cal, rms=0.101810Jy sigma=0.655911 ! Inverting map ! Added new window around map position (-1.4, -3.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196852 Jy ! Component: 100 - total flux cleaned = 0.0320809 Jy ! Total flux subtracted in 100 components = 0.0320809 Jy ! Clean residual min=-0.016144 max=0.018377 Jy/beam ! Clean residual mean=-0.000001 rms=0.003201 Jy/beam ! Combined flux in latest and established models = 0.816617 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.816617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096057Jy sigma=0.621608 ! Fit after self-cal, rms=0.095863Jy sigma=0.620135 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7235 mas, bmaj=1.709 mas, bpa=-4.648 degrees ! Estimated noise=1.45288 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181101 Jy ! Component: 100 - total flux cleaned = 0.0315707 Jy ! Component: 150 - total flux cleaned = 0.0421753 Jy ! Component: 200 - total flux cleaned = 0.0507568 Jy ! Total flux subtracted in 200 components = 0.0507568 Jy ! Clean residual min=-0.016821 max=0.020538 Jy/beam ! Clean residual mean=-0.000004 rms=0.003696 Jy/beam ! Combined flux in latest and established models = 0.867374 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.867374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090172Jy sigma=0.588792 ! Fit after self-cal, rms=0.090005Jy sigma=0.587513 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7235 x 1.709 at -4.648 degrees (North through East) ! Clean map min=-0.015663 max=0.5729 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.91 LA 1.05 MK 1.03 ! NL 1.11 OV 0.91 PT 0.92 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.92 LA 1.03 MK 1.06 ! NL 1.10 OV 0.92 PT 0.94 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.92 LA 1.05 MK 1.02 ! NL 1.12 OV 0.93 PT 0.95 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.91 LA 1.06 MK 1.06 ! NL 1.12 OV 0.94 PT 0.93 SC 1.01 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.94 LA 1.05 MK 1.05 ! NL 1.10 OV 0.92 PT 0.95 SC 1.02 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.92 LA 1.05 MK 1.09 ! NL 1.11 OV 0.93 PT 0.96 SC 1.02 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.96 LA 1.04 MK 1.10 ! NL 1.12 OV 0.95 PT 0.93 SC 1.02 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.94 LA 1.04 MK 1.09 ! NL 1.13 OV 0.92 PT 0.96 SC 1.07 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.95 LA 1.04 MK 1.10 ! NL 1.13 OV 0.91 PT 0.97 SC 1.03 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.91 LA 1.05 MK 1.10 ! NL 1.14 OV 0.95 PT 0.97 SC 1.06 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.97 LA 1.05 MK 1.09 ! NL 1.14 OV 0.93 PT 0.96 SC 1.06 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.94 LA 1.06 MK 1.14 ! NL 1.14 OV 0.91 PT 0.96 SC 1.08 ! ! ! Fit before self-cal, rms=0.090005Jy sigma=0.587513 ! Fit after self-cal, rms=0.068906Jy sigma=0.449555 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.739 mas, bmaj=1.719 mas, bpa=-4.238 degrees ! Estimated noise=1.4768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.009356 Jy ! Component: 100 - total flux cleaned = -0.0127385 Jy ! Component: 150 - total flux cleaned = -0.014048 Jy ! Component: 200 - total flux cleaned = -0.0148091 Jy ! Total flux subtracted in 200 components = -0.0148091 Jy ! Clean residual min=-0.007591 max=0.010461 Jy/beam ! Clean residual mean=-0.000010 rms=0.001703 Jy/beam ! Combined flux in latest and established models = 0.852565 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.852565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066404Jy sigma=0.432209 ! Fit after self-cal, rms=0.066237Jy sigma=0.431112 ! Inverting map ! Added new window around map position (-0.6, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116109 Jy ! Component: 100 - total flux cleaned = 0.0179431 Jy ! Component: 150 - total flux cleaned = 0.0189345 Jy ! Component: 200 - total flux cleaned = 0.0196011 Jy ! Total flux subtracted in 200 components = 0.0196011 Jy ! Clean residual min=-0.007216 max=0.008113 Jy/beam ! Clean residual mean=-0.000007 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.872166 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.872166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063849Jy sigma=0.415802 ! Fit after self-cal, rms=0.063670Jy sigma=0.414371 ! Inverting map ! Added new window around map position (-0.6, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455018 Jy ! Component: 100 - total flux cleaned = 0.0051533 Jy ! Component: 150 - total flux cleaned = 0.00531006 Jy ! Component: 200 - total flux cleaned = 0.00546218 Jy ! Total flux subtracted in 200 components = 0.00546218 Jy ! Clean residual min=-0.006893 max=0.007203 Jy/beam ! Clean residual mean=-0.000007 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.877628 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 89 components and 0.877628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062478Jy sigma=0.406715 ! Fit after self-cal, rms=0.062409Jy sigma=0.406082 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062409Jy sigma=0.406082 ! Fit after self-cal, rms=0.059505Jy sigma=0.390512 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7343 mas, bmaj=1.716 mas, bpa=-4.545 degrees ! Estimated noise=1.46797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000382103 Jy ! Component: 100 - total flux cleaned = -0.00065443 Jy ! Component: 150 - total flux cleaned = -0.00125865 Jy ! Component: 200 - total flux cleaned = -0.00158225 Jy ! Total flux subtracted in 200 components = -0.00158225 Jy ! Clean residual min=-0.004411 max=0.004273 Jy/beam ! Clean residual mean=0.000000 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.876046 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 0.876046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058811Jy sigma=0.386280 ! Fit after self-cal, rms=0.058756Jy sigma=0.385946 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000932936 Jy ! Component: 100 - total flux cleaned = 0.000732993 Jy ! Component: 150 - total flux cleaned = 0.000733152 Jy ! Component: 200 - total flux cleaned = 0.000731052 Jy ! Total flux subtracted in 200 components = 0.000731052 Jy ! Clean residual min=-0.004035 max=0.004020 Jy/beam ! Clean residual mean=0.000000 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.876777 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 0.876777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058474Jy sigma=0.384236 ! Fit after self-cal, rms=0.058458Jy sigma=0.384129 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058458Jy sigma=0.384129 ! Fit after self-cal, rms=0.058142Jy sigma=0.382977 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7329 mas, bmaj=1.715 mas, bpa=-4.592 degrees ! Estimated noise=1.46659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047769 Jy ! Component: 100 - total flux cleaned = -0.00145107 Jy ! Component: 150 - total flux cleaned = -0.00187256 Jy ! Component: 200 - total flux cleaned = -0.00218054 Jy ! Total flux subtracted in 200 components = -0.00218054 Jy ! Clean residual min=-0.003471 max=0.003457 Jy/beam ! Clean residual mean=0.000002 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.874597 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 118 components and 0.874596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057826Jy sigma=0.380996 ! Fit after self-cal, rms=0.057803Jy sigma=0.380848 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00059189 Jy ! Component: 100 - total flux cleaned = 0.000515468 Jy ! Component: 150 - total flux cleaned = 0.000378537 Jy ! Component: 200 - total flux cleaned = 0.000314182 Jy ! Total flux subtracted in 200 components = 0.000314182 Jy ! Clean residual min=-0.003338 max=0.003236 Jy/beam ! Clean residual mean=0.000002 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.874911 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 124 components and 0.874911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057647Jy sigma=0.379883 ! Fit after self-cal, rms=0.057640Jy sigma=0.379834 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057640Jy sigma=0.379834 ! Fit after self-cal, rms=0.057509Jy sigma=0.379394 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.72 mas, bmaj=2.768 mas, bpa=-3.907 degrees ! Estimated noise=2.22779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000527831 Jy ! Component: 100 - total flux cleaned = -0.00138521 Jy ! Component: 150 - total flux cleaned = -0.00173821 Jy ! Component: 200 - total flux cleaned = -0.00201916 Jy ! Total flux subtracted in 200 components = -0.00201916 Jy ! Clean residual min=-0.003569 max=0.003099 Jy/beam ! Clean residual mean=0.000005 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.872892 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 133 components and 0.872892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057391Jy sigma=0.378895 ! Fit after self-cal, rms=0.057372Jy sigma=0.378688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.89618e-05 Jy ! Component: 100 - total flux cleaned = -5.47738e-05 Jy ! Component: 150 - total flux cleaned = -0.000294072 Jy ! Component: 200 - total flux cleaned = -0.000507422 Jy ! Total flux subtracted in 200 components = -0.000507422 Jy ! Clean residual min=-0.003554 max=0.002978 Jy/beam ! Clean residual mean=0.000005 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.872384 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 140 components and 0.872384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057346Jy sigma=0.378680 ! Fit after self-cal, rms=0.057330Jy sigma=0.378511 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7323 mas, bmaj=1.715 mas, bpa=-4.611 degrees ! Estimated noise=1.46631 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7323 x 1.715 at -4.611 degrees (North through East) ! Clean map min=-0.0028879 max=0.57426 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057330Jy sigma=0.378511 ! Fit after self-cal, rms=0.053247Jy sigma=0.346861 ! Inverting map and beam ! Estimated beam: bmin=0.7322 mas, bmaj=1.717 mas, bpa=-4.521 degrees ! Estimated noise=1.46843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.09355e-05 Jy ! Component: 100 - total flux cleaned = -9.76426e-05 Jy ! Component: 150 - total flux cleaned = -0.000221689 Jy ! Component: 200 - total flux cleaned = -0.000568638 Jy ! Total flux subtracted in 200 components = -0.000568638 Jy ! Clean residual min=-0.002646 max=0.002678 Jy/beam ! Clean residual mean=0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.871816 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 148 components and 0.871816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053070Jy sigma=0.345696 ! Fit after self-cal, rms=0.053053Jy sigma=0.345639 ! Inverting map ! Added new window around map position (-8.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000240877 Jy ! Component: 100 - total flux cleaned = -0.000607691 Jy ! Component: 150 - total flux cleaned = -0.000910493 Jy ! Component: 200 - total flux cleaned = -0.00107307 Jy ! Total flux subtracted in 200 components = -0.00107307 Jy ! Clean residual min=-0.002511 max=0.002633 Jy/beam ! Clean residual mean=0.000001 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.870743 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 166 components and 0.870743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052840Jy sigma=0.344370 ! Fit after self-cal, rms=0.052825Jy sigma=0.344294 ! Inverting map ! Added new window around map position (14.4, 14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221703 Jy ! Component: 100 - total flux cleaned = 0.0027637 Jy ! Component: 150 - total flux cleaned = 0.00303523 Jy ! Component: 200 - total flux cleaned = 0.00318791 Jy ! Total flux subtracted in 200 components = 0.00318791 Jy ! Clean residual min=-0.002376 max=0.002514 Jy/beam ! Clean residual mean=0.000001 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.873931 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 180 components and 0.873931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052676Jy sigma=0.343277 ! Fit after self-cal, rms=0.052667Jy sigma=0.343245 ! Inverting map ! Added new window around map position (17.8, -20.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149317 Jy ! Component: 100 - total flux cleaned = 0.00196872 Jy ! Component: 150 - total flux cleaned = 0.00197255 Jy ! Component: 200 - total flux cleaned = 0.00197362 Jy ! Total flux subtracted in 200 components = 0.00197362 Jy ! Clean residual min=-0.002288 max=0.002466 Jy/beam ! Clean residual mean=0.000000 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.875904 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 197 components and 0.875904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052538Jy sigma=0.342467 ! Fit after self-cal, rms=0.052530Jy sigma=0.342431 ! Inverting map ! Added new window around map position (-6.6, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00047728 Jy ! Component: 100 - total flux cleaned = 0.00071532 Jy ! Component: 150 - total flux cleaned = 0.000667834 Jy ! Component: 200 - total flux cleaned = 0.000761904 Jy ! Total flux subtracted in 200 components = 0.000761904 Jy ! Clean residual min=-0.002043 max=0.002061 Jy/beam ! Clean residual mean=0.000000 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.876666 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 220 components and 0.876666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052388Jy sigma=0.341505 ! Fit after self-cal, rms=0.052377Jy sigma=0.341466 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052377Jy sigma=0.341466 ! Fit after self-cal, rms=0.052317Jy sigma=0.341194 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5998 mas, bmaj=1.522 mas, bpa=-4.113 degrees ! Estimated noise=1.97912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.437654 Jy ! Component: 100 - total flux cleaned = 0.618195 Jy ! Component: 150 - total flux cleaned = 0.703803 Jy ! Component: 200 - total flux cleaned = 0.745834 Jy ! Total flux subtracted in 200 components = 0.745834 Jy ! Clean residual min=-0.012496 max=0.020704 Jy/beam ! Clean residual mean=-0.000006 rms=0.002367 Jy/beam ! Combined flux in latest and established models = 0.745833 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.745833 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7317 mas, bmaj=1.717 mas, bpa=-4.534 degrees ! Estimated noise=1.46837 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0373372 Jy ! Component: 100 - total flux cleaned = 0.059933 Jy ! Component: 150 - total flux cleaned = 0.0747711 Jy ! Component: 200 - total flux cleaned = 0.0854084 Jy ! Total flux subtracted in 200 components = 0.0854084 Jy ! Clean residual min=-0.004435 max=0.006124 Jy/beam ! Clean residual mean=-0.000005 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.831242 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 34 components and 0.831242 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00801442 Jy ! Component: 100 - total flux cleaned = 0.0143184 Jy ! Component: 150 - total flux cleaned = 0.0194588 Jy ! Component: 200 - total flux cleaned = 0.0234129 Jy ! Total flux subtracted in 200 components = 0.0234129 Jy ! Clean residual min=-0.003808 max=0.004312 Jy/beam ! Clean residual mean=-0.000001 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.854655 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 54 components and 0.854655 Jy ! Inverting map ! Added new window around map position (8.4, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396765 Jy ! Component: 100 - total flux cleaned = 0.00653409 Jy ! Component: 150 - total flux cleaned = 0.00873123 Jy ! Component: 200 - total flux cleaned = 0.0106245 Jy ! Total flux subtracted in 200 components = 0.0106245 Jy ! Clean residual min=-0.003305 max=0.003236 Jy/beam ! Clean residual mean=0.000000 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.865279 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 73 components and 0.865279 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.72 mas, bmaj=2.767 mas, bpa=-3.913 degrees ! Estimated noise=2.23246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367798 Jy ! Component: 100 - total flux cleaned = 0.00615657 Jy ! Component: 150 - total flux cleaned = 0.0079593 Jy ! Component: 200 - total flux cleaned = 0.0093669 Jy ! Total flux subtracted in 200 components = 0.0093669 Jy ! Clean residual min=-0.003293 max=0.002891 Jy/beam ! Clean residual mean=0.000002 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.874646 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107491 Jy ! Component: 100 - total flux cleaned = 0.00183024 Jy ! Component: 150 - total flux cleaned = 0.00248665 Jy ! Component: 200 - total flux cleaned = 0.00305612 Jy ! Total flux subtracted in 200 components = 0.00305612 Jy ! Clean residual min=-0.003127 max=0.002452 Jy/beam ! Clean residual mean=0.000002 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.877702 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 137 components and 0.877702 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7317 mas, bmaj=1.717 mas, bpa=-4.534 degrees ! Estimated noise=1.46837 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.70985e-05 Jy ! Component: 100 - total flux cleaned = 0.000380614 Jy ! Component: 150 - total flux cleaned = 0.00104321 Jy ! Component: 200 - total flux cleaned = 0.001423 Jy ! Total flux subtracted in 200 components = 0.001423 Jy ! Clean residual min=-0.002744 max=0.002606 Jy/beam ! Clean residual mean=0.000001 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.879125 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 157 components and 0.879125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052776Jy sigma=0.344291 ! Fit after self-cal, rms=0.052703Jy sigma=0.343795 wmodel J2031+1219_X_h_map.mod ! Writing 157 model components to file: J2031+1219_X_h_map.mod wobs J2031+1219_X_h_uvs.fits ! Writing UV FITS file: J2031+1219_X_h_uvs.fits wwins J2031+1219_X_h_map.win ! wwins: Wrote 10 windows to J2031+1219_X_h_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102094 Jy ! Component: 100 - total flux cleaned = -0.00189512 Jy ! Component: 150 - total flux cleaned = -0.00255921 Jy ! Component: 200 - total flux cleaned = -0.003036 Jy ! Component: 250 - total flux cleaned = -0.00338071 Jy ! Component: 300 - total flux cleaned = -0.00356714 Jy ! Component: 350 - total flux cleaned = -0.00371283 Jy ! Component: 400 - total flux cleaned = -0.00392554 Jy ! Component: 450 - total flux cleaned = -0.00406425 Jy ! Component: 500 - total flux cleaned = -0.00416728 Jy ! Component: 550 - total flux cleaned = -0.00440163 Jy ! Component: 600 - total flux cleaned = -0.00456475 Jy ! Component: 650 - total flux cleaned = -0.00462823 Jy ! Component: 700 - total flux cleaned = -0.00469181 Jy ! Component: 750 - total flux cleaned = -0.00484858 Jy ! Component: 800 - total flux cleaned = -0.00500229 Jy ! Component: 850 - total flux cleaned = -0.00515367 Jy ! Component: 900 - total flux cleaned = -0.0052733 Jy ! Component: 950 - total flux cleaned = -0.00545032 Jy ! Component: 1000 - total flux cleaned = -0.00559566 Jy ! Component: 1050 - total flux cleaned = -0.00568197 Jy ! Component: 1100 - total flux cleaned = -0.00579536 Jy ! Component: 1150 - total flux cleaned = -0.00587967 Jy ! Component: 1200 - total flux cleaned = -0.00599046 Jy ! Component: 1250 - total flux cleaned = -0.00618208 Jy ! Component: 1300 - total flux cleaned = -0.00615511 Jy ! Component: 1350 - total flux cleaned = -0.0063156 Jy ! Component: 1400 - total flux cleaned = -0.00642124 Jy ! Component: 1450 - total flux cleaned = -0.00644725 Jy ! Component: 1500 - total flux cleaned = -0.00657662 Jy ! Component: 1550 - total flux cleaned = -0.00662745 Jy ! Component: 1600 - total flux cleaned = -0.00662704 Jy ! Component: 1650 - total flux cleaned = -0.00665169 Jy ! Component: 1700 - total flux cleaned = -0.00665159 Jy ! Component: 1750 - total flux cleaned = -0.00675026 Jy ! Component: 1800 - total flux cleaned = -0.00696955 Jy ! Component: 1850 - total flux cleaned = -0.00699401 Jy ! Component: 1900 - total flux cleaned = -0.00718601 Jy ! Component: 1950 - total flux cleaned = -0.00730445 Jy ! Component: 2000 - total flux cleaned = -0.00737496 Jy ! Component: 2050 - total flux cleaned = -0.00746777 Jy ! Component: 2100 - total flux cleaned = -0.00758365 Jy ! Component: 2150 - total flux cleaned = -0.00781237 Jy ! Component: 2200 - total flux cleaned = -0.00781257 Jy ! Component: 2250 - total flux cleaned = -0.00792483 Jy ! Component: 2300 - total flux cleaned = -0.00796939 Jy ! Component: 2350 - total flux cleaned = -0.00803575 Jy ! Component: 2400 - total flux cleaned = -0.00814531 Jy ! Component: 2450 - total flux cleaned = -0.00808008 Jy ! Component: 2500 - total flux cleaned = -0.00820952 Jy ! Component: 2550 - total flux cleaned = -0.00820952 Jy ! Component: 2600 - total flux cleaned = -0.0083371 Jy ! Component: 2650 - total flux cleaned = -0.00829485 Jy ! Component: 2700 - total flux cleaned = -0.00837884 Jy ! Component: 2750 - total flux cleaned = -0.00837866 Jy ! Component: 2800 - total flux cleaned = -0.00835825 Jy ! Component: 2850 - total flux cleaned = -0.00841991 Jy ! Component: 2900 - total flux cleaned = -0.00850098 Jy ! Component: 2950 - total flux cleaned = -0.00850092 Jy ! Component: 3000 - total flux cleaned = -0.00852122 Jy ! Component: 3050 - total flux cleaned = -0.00852111 Jy ! Component: 3100 - total flux cleaned = -0.00861949 Jy ! Component: 3150 - total flux cleaned = -0.00852149 Jy ! Component: 3200 - total flux cleaned = -0.00857993 Jy ! Component: 3250 - total flux cleaned = -0.00852194 Jy ! Component: 3300 - total flux cleaned = -0.00859862 Jy ! Component: 3350 - total flux cleaned = -0.00863679 Jy ! Component: 3400 - total flux cleaned = -0.00861796 Jy ! Component: 3450 - total flux cleaned = -0.0086556 Jy ! Component: 3500 - total flux cleaned = -0.00869305 Jy ! Component: 3550 - total flux cleaned = -0.00871139 Jy ! Component: 3600 - total flux cleaned = -0.00872984 Jy ! Component: 3650 - total flux cleaned = -0.00874816 Jy ! Component: 3700 - total flux cleaned = -0.00882055 Jy ! Component: 3750 - total flux cleaned = -0.00874838 Jy ! Component: 3800 - total flux cleaned = -0.00878422 Jy ! Component: 3850 - total flux cleaned = -0.00881984 Jy ! Component: 3900 - total flux cleaned = -0.00881972 Jy ! Component: 3950 - total flux cleaned = -0.00885465 Jy ! Component: 4000 - total flux cleaned = -0.00888962 Jy ! Component: 4050 - total flux cleaned = -0.00890701 Jy ! Total flux subtracted in 4096 components = -0.00901064 Jy ! Clean residual min=-0.001278 max=0.001015 Jy/beam ! Clean residual mean=0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.870115 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 483 components and 0.870115 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2031+1219_X_h_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7317 x 1.717 at -4.534 degrees (North through East) ! Clean map min=-0.001547 max=0.57485 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2031+1219_X_h_map.fits wmodel /image_prod/ug002_uva//J2031+1219_X_h_map.mod ! Writing 483 model components to file: /image_prod/ug002_uva//J2031+1219_X_h_map.mod wobs /image_prod/ug002_uva//J2031+1219_X_h_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2031+1219_X_h_uvs.fits wwins /image_prod/ug002_uva//J2031+1219_X_h_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J2031+1219_X_h_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.574847 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00029536 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.154142 0.154142 0.308284 0.616568 1.23314 2.46627 4.93254 9.86508 19.7302 39.4603 78.9207 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.574 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1946.26 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2031+1219_X_h_dfm.log closed on Thu Mar 5 04:50:37 2020