! Started logfile: /image_prod/ug002_uva//J2031+1219_X_e_dfm.log on Thu Mar 5 04:50:18 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2031+1219_X_e_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2031+1219_X_e_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.759259 visibilities/baseline/integration-bin. ! Found source: J2031+1219 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7380 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2031+1219_X_e] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.263254Jy sigma=8.608705 ! Fit after self-cal, rms=0.329030Jy sigma=2.515409 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7589 mas, bmaj=1.893 mas, bpa=-6.467 degrees ! Estimated noise=1.66289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.534539 Jy ! Component: 100 - total flux cleaned = 0.717803 Jy ! Total flux subtracted in 100 components = 0.717803 Jy ! Clean residual min=-0.026417 max=0.076971 Jy/beam ! Clean residual mean=-0.000006 rms=0.005995 Jy/beam ! Combined flux in latest and established models = 0.717803 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.717803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165265Jy sigma=1.064989 ! Fit after self-cal, rms=0.164211Jy sigma=1.053194 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.08339 Jy ! Component: 100 - total flux cleaned = 0.122596 Jy ! Total flux subtracted in 100 components = 0.122596 Jy ! Clean residual min=-0.016804 max=0.029247 Jy/beam ! Clean residual mean=-0.000002 rms=0.003406 Jy/beam ! Combined flux in latest and established models = 0.840398 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.840398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102187Jy sigma=0.668378 ! Fit after self-cal, rms=0.101634Jy sigma=0.661359 ! Inverting map ! Added new window around map position (-0.6, -2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294798 Jy ! Component: 100 - total flux cleaned = 0.0485776 Jy ! Total flux subtracted in 100 components = 0.0485776 Jy ! Clean residual min=-0.015301 max=0.021296 Jy/beam ! Clean residual mean=0.000000 rms=0.002813 Jy/beam ! Combined flux in latest and established models = 0.888976 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 15 components and 0.888976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087748Jy sigma=0.577744 ! Fit after self-cal, rms=0.087445Jy sigma=0.574967 ! Inverting map ! Added new window around map position (2, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193121 Jy ! Component: 100 - total flux cleaned = 0.0317578 Jy ! Total flux subtracted in 100 components = 0.0317578 Jy ! Clean residual min=-0.013940 max=0.017713 Jy/beam ! Clean residual mean=0.000002 rms=0.002510 Jy/beam ! Combined flux in latest and established models = 0.920734 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.920734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080745Jy sigma=0.534584 ! Fit after self-cal, rms=0.080478Jy sigma=0.532570 ! Inverting map ! Added new window around map position (-1.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150685 Jy ! Component: 100 - total flux cleaned = 0.025139 Jy ! Total flux subtracted in 100 components = 0.025139 Jy ! Clean residual min=-0.013529 max=0.012851 Jy/beam ! Clean residual mean=0.000004 rms=0.002313 Jy/beam ! Combined flux in latest and established models = 0.945873 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.945873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076074Jy sigma=0.505330 ! Fit after self-cal, rms=0.075995Jy sigma=0.504746 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9324 mas, bmaj=2.184 mas, bpa=-6.371 degrees ! Estimated noise=1.21607 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116169 Jy ! Component: 100 - total flux cleaned = 0.0196476 Jy ! Component: 150 - total flux cleaned = 0.0254903 Jy ! Component: 200 - total flux cleaned = 0.0284654 Jy ! Total flux subtracted in 200 components = 0.0284654 Jy ! Clean residual min=-0.012119 max=0.013257 Jy/beam ! Clean residual mean=0.000012 rms=0.002694 Jy/beam ! Combined flux in latest and established models = 0.974338 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 59 components and 0.974338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073322Jy sigma=0.489946 ! Fit after self-cal, rms=0.073267Jy sigma=0.489464 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9324 x 2.184 at -6.371 degrees (North through East) ! Clean map min=-0.011478 max=0.69311 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 1.04 ! LA 1.02 MK 1.00 NL 1.05 OV 0.92 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.03 KP 1.05 ! LA 1.00 MK 1.00 NL 1.05 OV 0.93 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.01 KP 1.05 ! LA 1.02 MK 1.01 NL 1.05 OV 0.93 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.02 KP 1.04 ! LA 1.02 MK 1.01 NL 1.05 OV 0.94 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00 KP 1.05 ! LA 1.01 MK 0.99 NL 1.06 OV 0.94 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.01 KP 1.05 ! LA 1.03 MK 1.00 NL 1.06 OV 0.87 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.02 KP 1.03 ! LA 1.01 MK 0.99 NL 1.05 OV 0.94 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.01 KP 1.06 ! LA 1.02 MK 1.02 NL 1.04 OV 0.91 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.00 KP 1.04 ! LA 1.02 MK 1.02 NL 1.06 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 1.01 KP 1.03 ! LA 1.02 MK 1.00 NL 1.05 OV 0.93 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.01 KP 1.05 ! LA 1.01 MK 1.00 NL 1.04 OV 0.92 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.01 KP 1.06 ! LA 1.03 MK 0.95 NL 1.06 OV 0.93 ! PT 0.92 SC 1.02 ! ! ! Fit before self-cal, rms=0.073267Jy sigma=0.489464 ! Fit after self-cal, rms=0.056051Jy sigma=0.378682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.933 mas, bmaj=2.187 mas, bpa=-6.21 degrees ! Estimated noise=1.21783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00823622 Jy ! Component: 100 - total flux cleaned = -0.0110632 Jy ! Component: 150 - total flux cleaned = -0.0129089 Jy ! Component: 200 - total flux cleaned = -0.0141025 Jy ! Total flux subtracted in 200 components = -0.0141025 Jy ! Clean residual min=-0.007499 max=0.004980 Jy/beam ! Clean residual mean=0.000008 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.960236 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 0.960236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054533Jy sigma=0.368085 ! Fit after self-cal, rms=0.054506Jy sigma=0.367804 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054506Jy sigma=0.367804 ! Fit after self-cal, rms=0.052721Jy sigma=0.355006 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9312 mas, bmaj=2.183 mas, bpa=-6.316 degrees ! Estimated noise=1.21608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00536049 Jy ! Component: 100 - total flux cleaned = -0.00774025 Jy ! Component: 150 - total flux cleaned = -0.00949812 Jy ! Component: 200 - total flux cleaned = -0.0104596 Jy ! Total flux subtracted in 200 components = -0.0104596 Jy ! Clean residual min=-0.005032 max=0.004116 Jy/beam ! Clean residual mean=0.000003 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.949776 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.949776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051976Jy sigma=0.350078 ! Fit after self-cal, rms=0.051956Jy sigma=0.349917 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000576772 Jy ! Component: 100 - total flux cleaned = -0.000970195 Jy ! Component: 150 - total flux cleaned = -0.00132261 Jy ! Component: 200 - total flux cleaned = -0.00164466 Jy ! Total flux subtracted in 200 components = -0.00164466 Jy ! Clean residual min=-0.004782 max=0.003975 Jy/beam ! Clean residual mean=0.000003 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.948131 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 91 components and 0.948131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051754Jy sigma=0.348464 ! Fit after self-cal, rms=0.051738Jy sigma=0.348318 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051738Jy sigma=0.348318 ! Fit after self-cal, rms=0.051353Jy sigma=0.345619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9302 mas, bmaj=2.181 mas, bpa=-6.31 degrees ! Estimated noise=1.21582 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00400965 Jy ! Component: 100 - total flux cleaned = -0.00582102 Jy ! Component: 150 - total flux cleaned = -0.0069153 Jy ! Component: 200 - total flux cleaned = -0.00753646 Jy ! Total flux subtracted in 200 components = -0.00753646 Jy ! Clean residual min=-0.003910 max=0.003832 Jy/beam ! Clean residual mean=0.000003 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.940595 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 0.940595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050916Jy sigma=0.342692 ! Fit after self-cal, rms=0.050906Jy sigma=0.342607 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000447241 Jy ! Component: 100 - total flux cleaned = -0.000890917 Jy ! Component: 150 - total flux cleaned = -0.00111429 Jy ! Component: 200 - total flux cleaned = -0.00132463 Jy ! Total flux subtracted in 200 components = -0.00132463 Jy ! Clean residual min=-0.003669 max=0.003695 Jy/beam ! Clean residual mean=0.000003 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.93927 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 97 components and 0.93927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050774Jy sigma=0.341665 ! Fit after self-cal, rms=0.050764Jy sigma=0.341574 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050764Jy sigma=0.341574 ! Fit after self-cal, rms=0.050558Jy sigma=0.340394 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.025 mas, bmaj=3.041 mas, bpa=-8.291 degrees ! Estimated noise=1.58192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00348544 Jy ! Component: 100 - total flux cleaned = -0.00540241 Jy ! Component: 150 - total flux cleaned = -0.00612497 Jy ! Component: 200 - total flux cleaned = -0.0066076 Jy ! Total flux subtracted in 200 components = -0.0066076 Jy ! Clean residual min=-0.003823 max=0.004459 Jy/beam ! Clean residual mean=0.000005 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.932663 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 116 components and 0.932663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050430Jy sigma=0.339678 ! Fit after self-cal, rms=0.050409Jy sigma=0.339562 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000610067 Jy ! Component: 100 - total flux cleaned = 0.000729973 Jy ! Component: 150 - total flux cleaned = 0.00056743 Jy ! Component: 200 - total flux cleaned = 0.000301303 Jy ! Total flux subtracted in 200 components = 0.000301303 Jy ! Clean residual min=-0.002832 max=0.003212 Jy/beam ! Clean residual mean=0.000004 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.932964 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 152 components and 0.932964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050099Jy sigma=0.337743 ! Fit after self-cal, rms=0.050080Jy sigma=0.337614 ! Inverting map ! Added new window around map position (10, -13.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120069 Jy ! Component: 100 - total flux cleaned = 0.00113111 Jy ! Component: 150 - total flux cleaned = 0.000757626 Jy ! Component: 200 - total flux cleaned = 0.000360049 Jy ! Total flux subtracted in 200 components = 0.000360049 Jy ! Clean residual min=-0.002334 max=0.002147 Jy/beam ! Clean residual mean=0.000006 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.933324 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 182 components and 0.933324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049873Jy sigma=0.336179 ! Fit after self-cal, rms=0.049869Jy sigma=0.336103 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9295 mas, bmaj=2.179 mas, bpa=-6.284 degrees ! Estimated noise=1.21564 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9295 x 2.179 at -6.284 degrees (North through East) ! Clean map min=-0.0028295 max=0.69533 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049869Jy sigma=0.336103 ! Fit after self-cal, rms=0.046920Jy sigma=0.312448 ! Inverting map and beam ! Estimated beam: bmin=0.9293 mas, bmaj=2.179 mas, bpa=-6.279 degrees ! Estimated noise=1.2149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.67645e-05 Jy ! Component: 100 - total flux cleaned = -7.21771e-05 Jy ! Component: 150 - total flux cleaned = -0.000331564 Jy ! Component: 200 - total flux cleaned = -0.000573175 Jy ! Total flux subtracted in 200 components = -0.000573175 Jy ! Clean residual min=-0.002434 max=0.002421 Jy/beam ! Clean residual mean=0.000003 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.932751 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 206 components and 0.932751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.046606Jy sigma=0.309975 ! Fit after self-cal, rms=0.046600Jy sigma=0.309938 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000390945 Jy ! Component: 100 - total flux cleaned = -0.00060189 Jy ! Component: 150 - total flux cleaned = -0.000928644 Jy ! Component: 200 - total flux cleaned = -0.001174 Jy ! Total flux subtracted in 200 components = -0.001174 Jy ! Clean residual min=-0.002295 max=0.002198 Jy/beam ! Clean residual mean=0.000003 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.931577 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 222 components and 0.931577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.046436Jy sigma=0.308707 ! Fit after self-cal, rms=0.046435Jy sigma=0.308694 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.046435Jy sigma=0.308694 ! Fit after self-cal, rms=0.046391Jy sigma=0.308529 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.755 mas, bmaj=1.883 mas, bpa=-6.385 degrees ! Estimated noise=1.66262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.534884 Jy ! Component: 100 - total flux cleaned = 0.725808 Jy ! Component: 150 - total flux cleaned = 0.808078 Jy ! Component: 200 - total flux cleaned = 0.845798 Jy ! Total flux subtracted in 200 components = 0.845798 Jy ! Clean residual min=-0.007527 max=0.018412 Jy/beam ! Clean residual mean=-0.000004 rms=0.001840 Jy/beam ! Combined flux in latest and established models = 0.845798 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.845798 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9294 mas, bmaj=2.179 mas, bpa=-6.257 degrees ! Estimated noise=1.21456 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028192 Jy ! Component: 100 - total flux cleaned = 0.0444086 Jy ! Component: 150 - total flux cleaned = 0.0551419 Jy ! Component: 200 - total flux cleaned = 0.0627639 Jy ! Total flux subtracted in 200 components = 0.0627639 Jy ! Clean residual min=-0.003674 max=0.004357 Jy/beam ! Clean residual mean=-0.000002 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.908562 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.908562 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005402 Jy ! Component: 100 - total flux cleaned = 0.00902248 Jy ! Component: 150 - total flux cleaned = 0.0119229 Jy ! Component: 200 - total flux cleaned = 0.0134767 Jy ! Total flux subtracted in 200 components = 0.0134767 Jy ! Clean residual min=-0.003143 max=0.002596 Jy/beam ! Clean residual mean=0.000001 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.922038 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 52 components and 0.922039 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.027 mas, bmaj=3.042 mas, bpa=-8.253 degrees ! Estimated noise=1.58013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379206 Jy ! Component: 100 - total flux cleaned = 0.00488727 Jy ! Component: 150 - total flux cleaned = 0.00469376 Jy ! Component: 200 - total flux cleaned = 0.00469434 Jy ! Total flux subtracted in 200 components = 0.00469434 Jy ! Clean residual min=-0.002469 max=0.002626 Jy/beam ! Clean residual mean=0.000004 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.926733 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00023959 Jy ! Component: 100 - total flux cleaned = -0.000313026 Jy ! Component: 150 - total flux cleaned = -0.000512334 Jy ! Component: 200 - total flux cleaned = -0.000695211 Jy ! Total flux subtracted in 200 components = -0.000695211 Jy ! Clean residual min=-0.002305 max=0.002176 Jy/beam ! Clean residual mean=0.000004 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.926038 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 117 components and 0.926038 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9294 mas, bmaj=2.179 mas, bpa=-6.257 degrees ! Estimated noise=1.21456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000176097 Jy ! Component: 100 - total flux cleaned = 0.000181367 Jy ! Component: 150 - total flux cleaned = 0.000262035 Jy ! Component: 200 - total flux cleaned = 0.000334576 Jy ! Total flux subtracted in 200 components = 0.000334576 Jy ! Clean residual min=-0.002699 max=0.002327 Jy/beam ! Clean residual mean=0.000002 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.926372 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 146 components and 0.926372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.046560Jy sigma=0.309717 ! Fit after self-cal, rms=0.046513Jy sigma=0.309281 wmodel J2031+1219_X_e_map.mod ! Writing 146 model components to file: J2031+1219_X_e_map.mod wobs J2031+1219_X_e_uvs.fits ! Writing UV FITS file: J2031+1219_X_e_uvs.fits wwins J2031+1219_X_e_map.win ! wwins: Wrote 6 windows to J2031+1219_X_e_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119662 Jy ! Component: 100 - total flux cleaned = -0.00161935 Jy ! Component: 150 - total flux cleaned = -0.00177709 Jy ! Component: 200 - total flux cleaned = -0.00200426 Jy ! Component: 250 - total flux cleaned = -0.00225952 Jy ! Component: 300 - total flux cleaned = -0.00229482 Jy ! Component: 350 - total flux cleaned = -0.00239921 Jy ! Component: 400 - total flux cleaned = -0.00243322 Jy ! Component: 450 - total flux cleaned = -0.00243352 Jy ! Component: 500 - total flux cleaned = -0.00243333 Jy ! Component: 550 - total flux cleaned = -0.00246371 Jy ! Component: 600 - total flux cleaned = -0.00234049 Jy ! Component: 650 - total flux cleaned = -0.00219082 Jy ! Component: 700 - total flux cleaned = -0.00222078 Jy ! Component: 750 - total flux cleaned = -0.00201763 Jy ! Component: 800 - total flux cleaned = -0.00187539 Jy ! Component: 850 - total flux cleaned = -0.00179138 Jy ! Component: 900 - total flux cleaned = -0.00165304 Jy ! Component: 950 - total flux cleaned = -0.00154388 Jy ! Component: 1000 - total flux cleaned = -0.00138293 Jy ! Component: 1050 - total flux cleaned = -0.00138277 Jy ! Component: 1100 - total flux cleaned = -0.00122569 Jy ! Component: 1150 - total flux cleaned = -0.0011485 Jy ! Component: 1200 - total flux cleaned = -0.00104692 Jy ! Component: 1250 - total flux cleaned = -0.00104742 Jy ! Component: 1300 - total flux cleaned = -0.00107169 Jy ! Component: 1350 - total flux cleaned = -0.000899431 Jy ! Component: 1400 - total flux cleaned = -0.000899518 Jy ! Component: 1450 - total flux cleaned = -0.000875838 Jy ! Component: 1500 - total flux cleaned = -0.000828978 Jy ! Component: 1550 - total flux cleaned = -0.000805333 Jy ! Component: 1600 - total flux cleaned = -0.000689582 Jy ! Component: 1650 - total flux cleaned = -0.000712225 Jy ! Component: 1700 - total flux cleaned = -0.000599389 Jy ! Component: 1750 - total flux cleaned = -0.000532455 Jy ! Component: 1800 - total flux cleaned = -0.000598753 Jy ! Component: 1850 - total flux cleaned = -0.000489173 Jy ! Component: 1900 - total flux cleaned = -0.000488814 Jy ! Component: 1950 - total flux cleaned = -0.000553112 Jy ! Component: 2000 - total flux cleaned = -0.000510334 Jy ! Component: 2050 - total flux cleaned = -0.000467875 Jy ! Component: 2100 - total flux cleaned = -0.00036392 Jy ! Component: 2150 - total flux cleaned = -0.000509198 Jy ! Component: 2200 - total flux cleaned = -0.000509015 Jy ! Component: 2250 - total flux cleaned = -0.000529491 Jy ! Component: 2300 - total flux cleaned = -0.000509077 Jy ! Component: 2350 - total flux cleaned = -0.000409414 Jy ! Component: 2400 - total flux cleaned = -0.000409449 Jy ! Component: 2450 - total flux cleaned = -0.000389817 Jy ! Component: 2500 - total flux cleaned = -0.000311995 Jy ! Component: 2550 - total flux cleaned = -0.000331204 Jy ! Component: 2600 - total flux cleaned = -0.000197542 Jy ! Component: 2650 - total flux cleaned = -0.000159345 Jy ! Component: 2700 - total flux cleaned = -8.40499e-05 Jy ! Component: 2750 - total flux cleaned = -0.000102774 Jy ! Component: 2800 - total flux cleaned = -9.97883e-06 Jy ! Component: 2850 - total flux cleaned = -4.66485e-05 Jy ! Component: 2900 - total flux cleaned = -2.83145e-05 Jy ! Component: 2950 - total flux cleaned = -2.83284e-05 Jy ! Component: 3000 - total flux cleaned = -2.81664e-05 Jy ! Component: 3050 - total flux cleaned = -2.81153e-05 Jy ! Component: 3100 - total flux cleaned = 4.293e-05 Jy ! Component: 3150 - total flux cleaned = 6.04089e-05 Jy ! Component: 3200 - total flux cleaned = 6.02418e-05 Jy ! Component: 3250 - total flux cleaned = 0.00011234 Jy ! Component: 3300 - total flux cleaned = 0.000112189 Jy ! Component: 3350 - total flux cleaned = 0.000129572 Jy ! Component: 3400 - total flux cleaned = 0.00018044 Jy ! Component: 3450 - total flux cleaned = 0.000180399 Jy ! Component: 3500 - total flux cleaned = 0.000230477 Jy ! Component: 3550 - total flux cleaned = 0.000197317 Jy ! Component: 3600 - total flux cleaned = 0.000213954 Jy ! Component: 3650 - total flux cleaned = 0.000263229 Jy ! Component: 3700 - total flux cleaned = 0.000295696 Jy ! Component: 3750 - total flux cleaned = 0.000247265 Jy ! Component: 3800 - total flux cleaned = 0.000263381 Jy ! Component: 3850 - total flux cleaned = 0.000295486 Jy ! Component: 3900 - total flux cleaned = 0.000295472 Jy ! Component: 3950 - total flux cleaned = 0.000311281 Jy ! Component: 4000 - total flux cleaned = 0.000389627 Jy ! Component: 4050 - total flux cleaned = 0.000358377 Jy ! Total flux subtracted in 4096 components = 0.000373854 Jy ! Clean residual min=-0.000850 max=0.000902 Jy/beam ! Clean residual mean=0.000000 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.926746 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 441 components and 0.926746 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2031+1219_X_e_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9294 x 2.179 at -6.257 degrees (North through East) ! Clean map min=-0.0030086 max=0.69645 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2031+1219_X_e_map.fits wmodel /image_prod/ug002_uva//J2031+1219_X_e_map.mod ! Writing 441 model components to file: /image_prod/ug002_uva//J2031+1219_X_e_map.mod wobs /image_prod/ug002_uva//J2031+1219_X_e_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2031+1219_X_e_uvs.fits wwins /image_prod/ug002_uva//J2031+1219_X_e_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uva//J2031+1219_X_e_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.69645 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000269709 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.116179 0.116179 0.232358 0.464716 0.929431 1.85886 3.71772 7.43545 14.8709 29.7418 59.4836 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.696 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2582.22 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2031+1219_X_e_dfm.log closed on Thu Mar 5 04:50:22 2020