! Started logfile: /image_prod/ug002_uva//J2031+1219_S_j_dfm.log on Thu Mar  5 04:49:53 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2031+1219_S_j_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2031+1219_S_j_uva.fits
! AN table 1: 21 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.89418 visibilities/baseline/integration-bin.
! Found source: J2031+1219
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2535 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2031+1219_S_j]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.502098Jy  sigma=7.826305
! Fit after  self-cal, rms=0.260334Jy  sigma=1.229254
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.753 mas, bmaj=6.872 mas, bpa=-6.977 degrees
! Estimated noise=3.40249 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.822342 Jy
! Component: 100  -  total flux cleaned = 1.01998 Jy
! Total flux subtracted in 100 components = 1.01998 Jy
! Clean residual min=-0.044876 max=0.078093 Jy/beam
! Clean residual mean=-0.000042 rms=0.011659 Jy/beam
! Combined flux in latest and established models = 1.01998 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 1.01998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.251388Jy  sigma=1.174626
! Fit after  self-cal, rms=0.251371Jy  sigma=1.174544
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0826734 Jy
! Component: 100  -  total flux cleaned = 0.0965848 Jy
! Total flux subtracted in 100 components = 0.0965848 Jy
! Clean residual min=-0.040788 max=0.061829 Jy/beam
! Clean residual mean=0.000006 rms=0.009867 Jy/beam
! Combined flux in latest and established models = 1.11657 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 1.11657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.224003Jy  sigma=1.051450
! Fit after  self-cal, rms=0.223962Jy  sigma=1.051276
! Inverting map 
! Added new window around map position (-2.5, 9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0386644 Jy
! Component: 100  -  total flux cleaned = 0.0374559 Jy
! Total flux subtracted in 100 components = 0.0374559 Jy
! Clean residual min=-0.037225 max=0.050746 Jy/beam
! Clean residual mean=0.000018 rms=0.009025 Jy/beam
! Combined flux in latest and established models = 1.15402 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 23 components and 1.15402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.212326Jy  sigma=0.981065
! Fit after  self-cal, rms=0.211766Jy  sigma=0.976680
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.257 mas, bmaj=7.669 mas, bpa=-5.989 degrees
! Estimated noise=2.76581 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.5, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0361885 Jy
! Component: 100  -  total flux cleaned = 0.0433323 Jy
! Component: 150  -  total flux cleaned = 0.0416869 Jy
! Component: 200  -  total flux cleaned = 0.0380479 Jy
! Total flux subtracted in 200 components = 0.0380479 Jy
! Clean residual min=-0.028988 max=0.038115 Jy/beam
! Clean residual mean=0.000059 rms=0.006367 Jy/beam
! Combined flux in latest and established models = 1.19207 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 1.19207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.199976Jy  sigma=0.902999
! Fit after  self-cal, rms=0.199714Jy  sigma=0.901563
! Inverting map 
! Added new window around map position (-4.5, -13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175509 Jy
! Component: 100  -  total flux cleaned = 0.0107359 Jy
! Component: 150  -  total flux cleaned = 0.00828017 Jy
! Component: 200  -  total flux cleaned = 0.00613731 Jy
! Total flux subtracted in 200 components = 0.00613731 Jy
! Clean residual min=-0.024515 max=0.032758 Jy/beam
! Clean residual mean=0.000063 rms=0.005706 Jy/beam
! Combined flux in latest and established models = 1.19821 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 63 components and 1.19821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.192939Jy  sigma=0.858867
! Fit after  self-cal, rms=0.192407Jy  sigma=0.855570
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.257 x 7.669 at -5.989 degrees (North through East)
! Clean map  min=-0.022968  max=1.0443 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.99     HN        1.00     KP        0.99     
!   LA        1.01     MK        0.99     NL        0.93     OV        0.96     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.47     FD        0.99     HN        1.02     KP        0.96     
!   LA        1.00     MK        0.99     NL        1.09     OV        0.98     
!   PT        1.02     SC        0.87     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.00     HN        1.03     KP        0.95     
!   LA        1.00     MK        0.98     NL        1.02     OV        0.98     
!   PT        1.02     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.192407Jy  sigma=0.855570
! Fit after  self-cal, rms=0.143534Jy  sigma=0.655225
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.23 mas, bmaj=7.706 mas, bpa=-5.906 degrees
! Estimated noise=2.789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00398072 Jy
! Component: 100  -  total flux cleaned = -0.00345441 Jy
! Component: 150  -  total flux cleaned = -0.00292552 Jy
! Component: 200  -  total flux cleaned = -0.00197893 Jy
! Total flux subtracted in 200 components = -0.00197893 Jy
! Clean residual min=-0.019421 max=0.019906 Jy/beam
! Clean residual mean=0.000042 rms=0.004359 Jy/beam
! Combined flux in latest and established models = 1.19623 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 83 components and 1.19623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.139484Jy  sigma=0.633137
! Fit after  self-cal, rms=0.139422Jy  sigma=0.632710
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.139422Jy  sigma=0.632710
! Fit after  self-cal, rms=0.097883Jy  sigma=0.439959
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.236 mas, bmaj=7.806 mas, bpa=-5.237 degrees
! Estimated noise=2.80772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0133754 Jy
! Component: 100  -  total flux cleaned = -0.0171709 Jy
! Component: 150  -  total flux cleaned = -0.0178892 Jy
! Component: 200  -  total flux cleaned = -0.0176138 Jy
! Total flux subtracted in 200 components = -0.0176138 Jy
! Clean residual min=-0.011031 max=0.010650 Jy/beam
! Clean residual mean=0.000041 rms=0.002481 Jy/beam
! Combined flux in latest and established models = 1.17861 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 110 components and 1.17861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094378Jy  sigma=0.422225
! Fit after  self-cal, rms=0.094327Jy  sigma=0.422013
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (38, -68.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00579568 Jy
! Component: 100  -  total flux cleaned = 0.00553704 Jy
! Component: 150  -  total flux cleaned = 0.00526853 Jy
! Component: 200  -  total flux cleaned = 0.00480044 Jy
! Total flux subtracted in 200 components = 0.00480044 Jy
! Clean residual min=-0.010217 max=0.008387 Jy/beam
! Clean residual mean=0.000037 rms=0.002328 Jy/beam
! Combined flux in latest and established models = 1.18341 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 133 components and 1.18341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092539Jy  sigma=0.412889
! Fit after  self-cal, rms=0.092464Jy  sigma=0.412520
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092464Jy  sigma=0.412520
! Fit after  self-cal, rms=0.086813Jy  sigma=0.393035
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.232 mas, bmaj=7.833 mas, bpa=-5.115 degrees
! Estimated noise=2.80653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0101747 Jy
! Component: 100  -  total flux cleaned = -0.011429 Jy
! Component: 150  -  total flux cleaned = -0.0111693 Jy
! Component: 200  -  total flux cleaned = -0.0104606 Jy
! Total flux subtracted in 200 components = -0.0104606 Jy
! Clean residual min=-0.008497 max=0.007079 Jy/beam
! Clean residual mean=0.000037 rms=0.001932 Jy/beam
! Combined flux in latest and established models = 1.17295 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 145 components and 1.17295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084756Jy  sigma=0.382422
! Fit after  self-cal, rms=0.084717Jy  sigma=0.382289
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000640764 Jy
! Component: 100  -  total flux cleaned = 0.00124763 Jy
! Component: 150  -  total flux cleaned = 0.00217459 Jy
! Component: 200  -  total flux cleaned = 0.00285519 Jy
! Total flux subtracted in 200 components = 0.00285519 Jy
! Clean residual min=-0.008074 max=0.006734 Jy/beam
! Clean residual mean=0.000038 rms=0.001857 Jy/beam
! Combined flux in latest and established models = 1.17581 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 156 components and 1.17581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083866Jy  sigma=0.378232
! Fit after  self-cal, rms=0.083842Jy  sigma=0.378171
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083842Jy  sigma=0.378171
! Fit after  self-cal, rms=0.083626Jy  sigma=0.375009
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.445 mas, bmaj=11.07 mas, bpa=-3.139 degrees
! Estimated noise=3.52625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00328958 Jy
! Component: 100  -  total flux cleaned = -0.0036059 Jy
! Component: 150  -  total flux cleaned = -0.00361478 Jy
! Component: 200  -  total flux cleaned = -0.00316914 Jy
! Total flux subtracted in 200 components = -0.00316914 Jy
! Clean residual min=-0.006658 max=0.006230 Jy/beam
! Clean residual mean=0.000080 rms=0.001748 Jy/beam
! Combined flux in latest and established models = 1.17264 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 174 components and 1.17264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082997Jy  sigma=0.371628
! Fit after  self-cal, rms=0.082967Jy  sigma=0.371542
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.40489e-05 Jy
! Component: 100  -  total flux cleaned = 0.000488559 Jy
! Component: 150  -  total flux cleaned = 0.000994466 Jy
! Component: 200  -  total flux cleaned = 0.00130238 Jy
! Total flux subtracted in 200 components = 0.00130238 Jy
! Clean residual min=-0.006529 max=0.005921 Jy/beam
! Clean residual mean=0.000079 rms=0.001716 Jy/beam
! Combined flux in latest and established models = 1.17394 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 190 components and 1.17394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082777Jy  sigma=0.370496
! Fit after  self-cal, rms=0.082760Jy  sigma=0.370453
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.228 mas, bmaj=7.85 mas, bpa=-5.068 degrees
! Estimated noise=2.80503 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.228 x 7.85 at -5.068 degrees (North through East)
! Clean map  min=-0.010032  max=1.0579 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082760Jy  sigma=0.370453
! Fit after  self-cal, rms=0.078422Jy  sigma=0.342126
! Inverting map and beam 
! Estimated beam: bmin=3.225 mas, bmaj=7.855 mas, bpa=-5.068 degrees
! Estimated noise=2.80344 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00684494 Jy
! Component: 100  -  total flux cleaned = -0.0070648 Jy
! Component: 150  -  total flux cleaned = -0.0067299 Jy
! Component: 200  -  total flux cleaned = -0.00641438 Jy
! Total flux subtracted in 200 components = -0.00641438 Jy
! Clean residual min=-0.007127 max=0.006159 Jy/beam
! Clean residual mean=0.000027 rms=0.001547 Jy/beam
! Combined flux in latest and established models = 1.16753 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 201 components and 1.16753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077347Jy  sigma=0.337141
! Fit after  self-cal, rms=0.077331Jy  sigma=0.337112
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000430376 Jy
! Component: 100  -  total flux cleaned = 0.000709217 Jy
! Component: 150  -  total flux cleaned = 0.00098039 Jy
! Component: 200  -  total flux cleaned = 0.00148652 Jy
! Total flux subtracted in 200 components = 0.00148652 Jy
! Clean residual min=-0.006858 max=0.005961 Jy/beam
! Clean residual mean=0.000029 rms=0.001505 Jy/beam
! Combined flux in latest and established models = 1.16901 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 211 components and 1.16901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076843Jy  sigma=0.334939
! Fit after  self-cal, rms=0.076825Jy  sigma=0.334913
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076825Jy  sigma=0.334913
! Fit after  self-cal, rms=0.076834Jy  sigma=0.333312
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.724 mas, bmaj=7.065 mas, bpa=-5.896 degrees
! Estimated noise=3.46212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.836674 Jy
! Component: 100  -  total flux cleaned = 1.0244 Jy
! Component: 150  -  total flux cleaned = 1.09135 Jy
! Component: 200  -  total flux cleaned = 1.12742 Jy
! Total flux subtracted in 200 components = 1.12742 Jy
! Clean residual min=-0.016574 max=0.019472 Jy/beam
! Clean residual mean=0.000005 rms=0.003379 Jy/beam
! Combined flux in latest and established models = 1.12742 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 1.12742 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.222 mas, bmaj=7.864 mas, bpa=-5.037 degrees
! Estimated noise=2.80192 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0227619 Jy
! Component: 100  -  total flux cleaned = 0.0339215 Jy
! Component: 150  -  total flux cleaned = 0.0378506 Jy
! Component: 200  -  total flux cleaned = 0.0390864 Jy
! Total flux subtracted in 200 components = 0.0390864 Jy
! Clean residual min=-0.008813 max=0.008660 Jy/beam
! Clean residual mean=0.000032 rms=0.001929 Jy/beam
! Combined flux in latest and established models = 1.1665 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 32 components and 1.1665 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.439 mas, bmaj=11.1 mas, bpa=-3.287 degrees
! Estimated noise=3.52609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00112529 Jy
! Component: 100  -  total flux cleaned = -0.000940758 Jy
! Component: 150  -  total flux cleaned = -0.000799687 Jy
! Component: 200  -  total flux cleaned = -0.00030139 Jy
! Total flux subtracted in 200 components = -0.00030139 Jy
! Clean residual min=-0.005907 max=0.005260 Jy/beam
! Clean residual mean=0.000054 rms=0.001485 Jy/beam
! Combined flux in latest and established models = 1.1662 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000330793 Jy
! Component: 100  -  total flux cleaned = 0.000427837 Jy
! Component: 150  -  total flux cleaned = 0.000249597 Jy
! Component: 200  -  total flux cleaned = 0.000336433 Jy
! Total flux subtracted in 200 components = 0.000336433 Jy
! Clean residual min=-0.005745 max=0.005065 Jy/beam
! Clean residual mean=0.000052 rms=0.001451 Jy/beam
! Combined flux in latest and established models = 1.16654 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 58 components and 1.16654 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.222 mas, bmaj=7.864 mas, bpa=-5.037 degrees
! Estimated noise=2.80192 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000322179 Jy
! Component: 100  -  total flux cleaned = 0.00155223 Jy
! Component: 150  -  total flux cleaned = 0.00181072 Jy
! Component: 200  -  total flux cleaned = 0.00181783 Jy
! Total flux subtracted in 200 components = 0.00181783 Jy
! Clean residual min=-0.007040 max=0.006974 Jy/beam
! Clean residual mean=0.000024 rms=0.001624 Jy/beam
! Combined flux in latest and established models = 1.16836 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 67 components and 1.16836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078669Jy  sigma=0.341829
! Fit after  self-cal, rms=0.078491Jy  sigma=0.341168
wmodel J2031+1219_S_j_map.mod
! Writing 67 model components to file: J2031+1219_S_j_map.mod
wobs   J2031+1219_S_j_uvs.fits
! Writing UV FITS file: J2031+1219_S_j_uvs.fits
wwins  J2031+1219_S_j_map.win
! wwins: Wrote 5 windows to J2031+1219_S_j_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000681003 Jy
! Component: 100  -  total flux cleaned = 0.000678358 Jy
! Component: 150  -  total flux cleaned = 0.000453964 Jy
! Component: 200  -  total flux cleaned = 0.000343931 Jy
! Component: 250  -  total flux cleaned = 0.00044467 Jy
! Component: 300  -  total flux cleaned = 0.000240051 Jy
! Component: 350  -  total flux cleaned = 4.1977e-05 Jy
! Component: 400  -  total flux cleaned = -0.00034022 Jy
! Component: 450  -  total flux cleaned = -0.00033822 Jy
! Component: 500  -  total flux cleaned = -0.000337932 Jy
! Component: 550  -  total flux cleaned = -0.000247729 Jy
! Component: 600  -  total flux cleaned = 1.76467e-05 Jy
! Component: 650  -  total flux cleaned = 0.000190056 Jy
! Component: 700  -  total flux cleaned = 0.000616458 Jy
! Component: 750  -  total flux cleaned = 0.000781808 Jy
! Component: 800  -  total flux cleaned = 0.000944234 Jy
! Component: 850  -  total flux cleaned = 0.00118417 Jy
! Component: 900  -  total flux cleaned = 0.00134185 Jy
! Component: 950  -  total flux cleaned = 0.00149602 Jy
! Component: 1000  -  total flux cleaned = 0.0014199 Jy
! Component: 1050  -  total flux cleaned = 0.00164705 Jy
! Component: 1100  -  total flux cleaned = 0.00179734 Jy
! Component: 1150  -  total flux cleaned = 0.00194325 Jy
! Component: 1200  -  total flux cleaned = 0.00208749 Jy
! Component: 1250  -  total flux cleaned = 0.00179944 Jy
! Component: 1300  -  total flux cleaned = 0.00186901 Jy
! Component: 1350  -  total flux cleaned = 0.00151962 Jy
! Component: 1400  -  total flux cleaned = 0.00151936 Jy
! Component: 1450  -  total flux cleaned = 0.00138316 Jy
! Component: 1500  -  total flux cleaned = 0.00151672 Jy
! Component: 1550  -  total flux cleaned = 0.0013169 Jy
! Component: 1600  -  total flux cleaned = 0.00125111 Jy
! Component: 1650  -  total flux cleaned = 0.0012517 Jy
! Component: 1700  -  total flux cleaned = 0.00138004 Jy
! Component: 1750  -  total flux cleaned = 0.00138036 Jy
! Component: 1800  -  total flux cleaned = 0.00163191 Jy
! Component: 1850  -  total flux cleaned = 0.00150682 Jy
! Component: 1900  -  total flux cleaned = 0.00138378 Jy
! Component: 1950  -  total flux cleaned = 0.0015662 Jy
! Component: 2000  -  total flux cleaned = 0.00138467 Jy
! Component: 2050  -  total flux cleaned = 0.00138494 Jy
! Component: 2100  -  total flux cleaned = 0.00144417 Jy
! Component: 2150  -  total flux cleaned = 0.00126895 Jy
! Component: 2200  -  total flux cleaned = 0.00126788 Jy
! Component: 2250  -  total flux cleaned = 0.00115403 Jy
! Component: 2300  -  total flux cleaned = 0.00115392 Jy
! Component: 2350  -  total flux cleaned = 0.00126582 Jy
! Component: 2400  -  total flux cleaned = 0.000988991 Jy
! Component: 2450  -  total flux cleaned = 0.00109887 Jy
! Component: 2500  -  total flux cleaned = 0.000935348 Jy
! Component: 2550  -  total flux cleaned = 0.000881889 Jy
! Component: 2600  -  total flux cleaned = 0.000881667 Jy
! Component: 2650  -  total flux cleaned = 0.000934195 Jy
! Component: 2700  -  total flux cleaned = 0.000881557 Jy
! Component: 2750  -  total flux cleaned = 0.000830783 Jy
! Component: 2800  -  total flux cleaned = 0.0009328 Jy
! Component: 2850  -  total flux cleaned = 0.00108546 Jy
! Component: 2900  -  total flux cleaned = 0.000883909 Jy
! Component: 2950  -  total flux cleaned = 0.000884529 Jy
! Component: 3000  -  total flux cleaned = 0.0009335 Jy
! Component: 3050  -  total flux cleaned = 0.000982508 Jy
! Component: 3100  -  total flux cleaned = 0.000982437 Jy
! Component: 3150  -  total flux cleaned = 0.000934366 Jy
! Component: 3200  -  total flux cleaned = 0.000981824 Jy
! Component: 3250  -  total flux cleaned = 0.00102864 Jy
! Component: 3300  -  total flux cleaned = 0.000934521 Jy
! Component: 3350  -  total flux cleaned = 0.000840973 Jy
! Component: 3400  -  total flux cleaned = 0.000979871 Jy
! Component: 3450  -  total flux cleaned = 0.000842653 Jy
! Component: 3500  -  total flux cleaned = 0.000888626 Jy
! Component: 3550  -  total flux cleaned = 0.000843876 Jy
! Component: 3600  -  total flux cleaned = 0.000933477 Jy
! Component: 3650  -  total flux cleaned = 0.000933304 Jy
! Component: 3700  -  total flux cleaned = 0.00097752 Jy
! Component: 3750  -  total flux cleaned = 0.00106446 Jy
! Component: 3800  -  total flux cleaned = 0.000979181 Jy
! Component: 3850  -  total flux cleaned = 0.00110813 Jy
! Component: 3900  -  total flux cleaned = 0.00110818 Jy
! Component: 3950  -  total flux cleaned = 0.00119255 Jy
! Component: 4000  -  total flux cleaned = 0.00123369 Jy
! Component: 4050  -  total flux cleaned = 0.00102642 Jy
! Total flux subtracted in 4096 components = 0.00110861 Jy
! Clean residual min=-0.002046 max=0.002445 Jy/beam
! Clean residual mean=0.000010 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 1.16947 Jy
keep
! Adding 285 model components to the UV plane model.
! The established model now contains 351 components and 1.16947 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2031+1219_S_j_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.222 x 7.864 at -5.037 degrees (North through East)
! Clean map  min=-0.0053059  max=1.0662 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2031+1219_S_j_map.fits
wmodel /image_prod/ug002_uva//J2031+1219_S_j_map.mod
! Writing 351 model components to file: /image_prod/ug002_uva//J2031+1219_S_j_map.mod
wobs   /image_prod/ug002_uva//J2031+1219_S_j_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2031+1219_S_j_uvs.fits
wwins  /image_prod/ug002_uva//J2031+1219_S_j_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J2031+1219_S_j_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.06617 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000752613 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.21177 0.21177 0.423541 0.847082 1.69416 3.38833 6.77665 13.5533 27.1066 54.2132
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.066 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1416.63 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2031+1219_S_j_dfm.log closed on Thu Mar  5 04:49:57 2020