! Started logfile: /image_prod/ug002_uva//J2029+4926_X_dfm.log on Thu Mar 5 04:48:12 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2029+4926_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2029+4926_X_uva.fits ! AN table 1: 155 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.931326 visibilities/baseline/integration-bin. ! Found source: J2029+4926 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 77952 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2029+4926_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005059Jy sigma=9.802056 ! Fit after self-cal, rms=0.939685Jy sigma=9.124250 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7003 mas, bmaj=1.089 mas, bpa=-15.71 degrees ! Estimated noise=0.737568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0369278 Jy ! Component: 100 - total flux cleaned = 0.0541941 Jy ! Total flux subtracted in 100 components = 0.0541941 Jy ! Clean residual min=-0.003102 max=0.008946 Jy/beam ! Clean residual mean=0.000010 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.0541941 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0541941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058819Jy sigma=0.560301 ! Fit after self-cal, rms=0.058085Jy sigma=0.553628 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117292 Jy ! Component: 100 - total flux cleaned = 0.0198578 Jy ! Total flux subtracted in 100 components = 0.0198578 Jy ! Clean residual min=-0.002409 max=0.004806 Jy/beam ! Clean residual mean=0.000008 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0740518 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.0740518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053112Jy sigma=0.496262 ! Fit after self-cal, rms=0.053093Jy sigma=0.496030 ! Inverting map ! Added new window around map position (1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631967 Jy ! Component: 100 - total flux cleaned = 0.0110496 Jy ! Total flux subtracted in 100 components = 0.0110496 Jy ! Clean residual min=-0.001989 max=0.002966 Jy/beam ! Clean residual mean=0.000006 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0851015 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 48 components and 0.0851015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051477Jy sigma=0.476768 ! Fit after self-cal, rms=0.051467Jy sigma=0.476650 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.977 mas, bmaj=1.451 mas, bpa=-15.58 degrees ! Estimated noise=0.263251 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00746449 Jy ! Component: 100 - total flux cleaned = 0.011993 Jy ! Component: 150 - total flux cleaned = 0.0149436 Jy ! Component: 200 - total flux cleaned = 0.0169247 Jy ! Total flux subtracted in 200 components = 0.0169247 Jy ! Clean residual min=-0.001767 max=0.002445 Jy/beam ! Clean residual mean=0.000008 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.102026 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 76 components and 0.102026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050390Jy sigma=0.463596 ! Fit after self-cal, rms=0.050370Jy sigma=0.463289 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.977 x 1.451 at -15.58 degrees (North through East) ! Clean map min=-0.0016551 max=0.057016 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 1.01 KP 1.02 ! LA 0.97 MK 1.13 NL 1.10 OV 0.99 ! PT 0.96 SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.94 KP 1.00 ! LA 0.95 MK 1.17 NL 1.09 OV 0.99 ! PT 0.96 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.95 KP 1.00 ! LA 0.96 MK 1.18 NL 1.08 OV 0.99 ! PT 0.98 SC 1.13 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.93 KP 1.00 ! LA 0.97 MK 1.18 NL 1.06 OV 1.01 ! PT 0.99 SC 1.09 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.91 KP 1.00 ! LA 0.97 MK 1.08 NL 1.06 OV 0.99 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.93 KP 0.99 ! LA 0.95 MK 1.09 NL 1.08 OV 1.00 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.92 KP 0.99 ! LA 0.97 MK 1.10 NL 1.02 OV 0.96 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 0.86 KP 0.99 ! LA 0.96 MK 1.06 NL 1.04 OV 0.98 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.87 KP 1.00 ! LA 0.94 MK 1.07 NL 1.04 OV 0.97 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.87 KP 0.99 ! LA 0.95 MK 1.07 NL 1.13 OV 0.98 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.85 KP 1.00 ! LA 0.94 MK 1.06 NL 1.02 OV 0.97 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 HN 0.87 KP 0.98 ! LA 0.96 MK 0.89 NL 1.02 OV 0.96 ! PT 0.96 SC 0.92 ! ! ! Fit before self-cal, rms=0.050370Jy sigma=0.463289 ! Fit after self-cal, rms=0.050236Jy sigma=0.460956 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9947 mas, bmaj=1.464 mas, bpa=-16.11 degrees ! Estimated noise=0.263734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000502052 Jy ! Component: 100 - total flux cleaned = 0.00069883 Jy ! Component: 150 - total flux cleaned = 0.000887196 Jy ! Component: 200 - total flux cleaned = 0.000990804 Jy ! Total flux subtracted in 200 components = 0.000990804 Jy ! Clean residual min=-0.001673 max=0.001740 Jy/beam ! Clean residual mean=0.000009 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.103017 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.103017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050209Jy sigma=0.460690 ! Fit after self-cal, rms=0.050225Jy sigma=0.460609 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050225Jy sigma=0.460609 ! Fit after self-cal, rms=0.050677Jy sigma=0.456031 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9731 mas, bmaj=1.443 mas, bpa=-15.72 degrees ! Estimated noise=0.260168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500167 Jy ! Component: 100 - total flux cleaned = 0.000622193 Jy ! Component: 150 - total flux cleaned = 0.00070312 Jy ! Component: 200 - total flux cleaned = 0.000755652 Jy ! Total flux subtracted in 200 components = 0.000755652 Jy ! Clean residual min=-0.000645 max=0.000891 Jy/beam ! Clean residual mean=0.000000 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.103773 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.103773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050656Jy sigma=0.455820 ! Fit after self-cal, rms=0.050720Jy sigma=0.455689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621616 Jy ! Component: 100 - total flux cleaned = 0.00067202 Jy ! Component: 150 - total flux cleaned = 0.000636851 Jy ! Component: 200 - total flux cleaned = 0.000636453 Jy ! Total flux subtracted in 200 components = 0.000636453 Jy ! Clean residual min=-0.000605 max=0.000726 Jy/beam ! Clean residual mean=0.000000 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.104409 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.104409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050701Jy sigma=0.455499 ! Fit after self-cal, rms=0.050699Jy sigma=0.455475 ! Inverting map ! Added new window around map position (3, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000687488 Jy ! Component: 100 - total flux cleaned = 0.000822953 Jy ! Component: 150 - total flux cleaned = 0.000837058 Jy ! Component: 200 - total flux cleaned = 0.000874887 Jy ! Total flux subtracted in 200 components = 0.000874887 Jy ! Clean residual min=-0.000598 max=0.000711 Jy/beam ! Clean residual mean=0.000000 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.105284 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 108 components and 0.105284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050686Jy sigma=0.455357 ! Fit after self-cal, rms=0.050683Jy sigma=0.455346 ! Inverting map ! Added new window around map position (22.6, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482105 Jy ! Component: 100 - total flux cleaned = 0.00067658 Jy ! Component: 150 - total flux cleaned = 0.00074037 Jy ! Component: 200 - total flux cleaned = 0.000797553 Jy ! Total flux subtracted in 200 components = 0.000797553 Jy ! Clean residual min=-0.000584 max=0.000680 Jy/beam ! Clean residual mean=0.000000 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.106081 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 127 components and 0.106081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050672Jy sigma=0.455248 ! Fit after self-cal, rms=0.050670Jy sigma=0.455239 ! Inverting map ! Added new window around map position (3.8, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298651 Jy ! Component: 100 - total flux cleaned = 0.00025306 Jy ! Component: 150 - total flux cleaned = 0.000240494 Jy ! Component: 200 - total flux cleaned = 0.000228888 Jy ! Total flux subtracted in 200 components = 0.000228888 Jy ! Clean residual min=-0.000611 max=0.000648 Jy/beam ! Clean residual mean=0.000000 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.10631 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 142 components and 0.10631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050660Jy sigma=0.455144 ! Fit after self-cal, rms=0.050658Jy sigma=0.455135 ! Inverting map ! Added new window around map position (-22.4, -45.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000422858 Jy ! Component: 100 - total flux cleaned = 0.000517499 Jy ! Component: 150 - total flux cleaned = 0.000530806 Jy ! Component: 200 - total flux cleaned = 0.000542094 Jy ! Total flux subtracted in 200 components = 0.000542094 Jy ! Clean residual min=-0.000575 max=0.000592 Jy/beam ! Clean residual mean=-0.000000 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.106852 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 157 components and 0.106852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050648Jy sigma=0.455043 ! Fit after self-cal, rms=0.050646Jy sigma=0.455035 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050646Jy sigma=0.455035 ! Fit after self-cal, rms=0.050298Jy sigma=0.454931 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9642 mas, bmaj=1.433 mas, bpa=-16.06 degrees ! Estimated noise=0.257883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393488 Jy ! Component: 100 - total flux cleaned = 0.000486866 Jy ! Component: 150 - total flux cleaned = 0.000511005 Jy ! Component: 200 - total flux cleaned = 0.000511387 Jy ! Total flux subtracted in 200 components = 0.000511387 Jy ! Clean residual min=-0.000545 max=0.000594 Jy/beam ! Clean residual mean=-0.000000 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.107364 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 167 components and 0.107364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050291Jy sigma=0.454857 ! Fit after self-cal, rms=0.050291Jy sigma=0.454848 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22.6, -8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000352691 Jy ! Component: 100 - total flux cleaned = 0.000422599 Jy ! Component: 150 - total flux cleaned = 0.00047132 Jy ! Component: 200 - total flux cleaned = 0.000493398 Jy ! Total flux subtracted in 200 components = 0.000493398 Jy ! Clean residual min=-0.000528 max=0.000543 Jy/beam ! Clean residual mean=-0.000001 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.107857 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 187 components and 0.107857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050282Jy sigma=0.454769 ! Fit after self-cal, rms=0.050281Jy sigma=0.454764 ! Inverting map ! Added new window around map position (-38.2, 34.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00046092 Jy ! Component: 100 - total flux cleaned = 0.000612714 Jy ! Component: 150 - total flux cleaned = 0.000675661 Jy ! Component: 200 - total flux cleaned = 0.00068561 Jy ! Total flux subtracted in 200 components = 0.00068561 Jy ! Clean residual min=-0.000492 max=0.000498 Jy/beam ! Clean residual mean=-0.000001 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.108543 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 198 components and 0.108543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050275Jy sigma=0.454703 ! Fit after self-cal, rms=0.050273Jy sigma=0.454698 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050273Jy sigma=0.454698 ! Fit after self-cal, rms=0.050033Jy sigma=0.454672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.325 mas, bmaj=2.546 mas, bpa=-41.03 degrees ! Estimated noise=0.322951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178497 Jy ! Component: 100 - total flux cleaned = 0.000191 Jy ! Component: 150 - total flux cleaned = 0.000201327 Jy ! Component: 200 - total flux cleaned = 0.000209821 Jy ! Total flux subtracted in 200 components = 0.000209821 Jy ! Clean residual min=-0.000475 max=0.000417 Jy/beam ! Clean residual mean=-0.000001 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.108753 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 223 components and 0.108753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050031Jy sigma=0.454642 ! Fit after self-cal, rms=0.050030Jy sigma=0.454640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.66987e-05 Jy ! Component: 100 - total flux cleaned = -4.87952e-05 Jy ! Component: 150 - total flux cleaned = -5.60536e-05 Jy ! Component: 200 - total flux cleaned = -6.32335e-05 Jy ! Total flux subtracted in 200 components = -6.32335e-05 Jy ! Clean residual min=-0.000474 max=0.000409 Jy/beam ! Clean residual mean=-0.000000 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.108689 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 234 components and 0.108689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050029Jy sigma=0.454628 ! Fit after self-cal, rms=0.050029Jy sigma=0.454626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9594 mas, bmaj=1.426 mas, bpa=-16.1 degrees ! Estimated noise=0.256669 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9594 x 1.426 at -16.1 degrees (North through East) ! Clean map min=-0.00054034 max=0.054924 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6896 mas, bmaj=1.069 mas, bpa=-16.15 degrees ! Estimated noise=0.706991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0361564 Jy ! Component: 100 - total flux cleaned = 0.0540557 Jy ! Component: 150 - total flux cleaned = 0.0655064 Jy ! Component: 200 - total flux cleaned = 0.0738173 Jy ! Total flux subtracted in 200 components = 0.0738173 Jy ! Clean residual min=-0.002268 max=0.004807 Jy/beam ! Clean residual mean=0.000006 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.0738173 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.0738173 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9594 mas, bmaj=1.426 mas, bpa=-16.1 degrees ! Estimated noise=0.256669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119559 Jy ! Component: 100 - total flux cleaned = 0.0188552 Jy ! Component: 150 - total flux cleaned = 0.0231287 Jy ! Component: 200 - total flux cleaned = 0.0258941 Jy ! Total flux subtracted in 200 components = 0.0258941 Jy ! Clean residual min=-0.000828 max=0.001859 Jy/beam ! Clean residual mean=0.000001 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.0997114 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 79 components and 0.0997114 Jy ! Inverting map ! Added new window around map position (0.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019982 Jy ! Component: 100 - total flux cleaned = 0.00341509 Jy ! Component: 150 - total flux cleaned = 0.00452927 Jy ! Component: 200 - total flux cleaned = 0.00547073 Jy ! Total flux subtracted in 200 components = 0.00547073 Jy ! Clean residual min=-0.000619 max=0.000703 Jy/beam ! Clean residual mean=0.000000 rms=0.000153 Jy/beam ! Combined flux in latest and established models = 0.105182 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 108 components and 0.105182 Jy ! Inverting map ! Added new window around map position (2.8, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000838864 Jy ! Component: 100 - total flux cleaned = 0.00156106 Jy ! Component: 150 - total flux cleaned = 0.00207662 Jy ! Component: 200 - total flux cleaned = 0.00247442 Jy ! Total flux subtracted in 200 components = 0.00247442 Jy ! Clean residual min=-0.000556 max=0.000571 Jy/beam ! Clean residual mean=-0.000000 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.107657 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 133 components and 0.107657 Jy ! Inverting map ! Added new window around map position (26.6, -21.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504904 Jy ! Component: 100 - total flux cleaned = 0.000787403 Jy ! Component: 150 - total flux cleaned = 0.000994818 Jy ! Component: 200 - total flux cleaned = 0.00122421 Jy ! Total flux subtracted in 200 components = 0.00122421 Jy ! Clean residual min=-0.000506 max=0.000489 Jy/beam ! Clean residual mean=-0.000000 rms=0.000124 Jy/beam ! Combined flux in latest and established models = 0.108881 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 146 components and 0.108881 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.325 mas, bmaj=2.546 mas, bpa=-41.03 degrees ! Estimated noise=0.322951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.86505e-05 Jy ! Component: 100 - total flux cleaned = 3.37169e-05 Jy ! Component: 150 - total flux cleaned = 0.000135582 Jy ! Component: 200 - total flux cleaned = 0.000222313 Jy ! Total flux subtracted in 200 components = 0.000222313 Jy ! Clean residual min=-0.000453 max=0.000437 Jy/beam ! Clean residual mean=-0.000000 rms=0.000125 Jy/beam ! Combined flux in latest and established models = 0.109103 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.75902e-05 Jy ! Component: 100 - total flux cleaned = 0.000176472 Jy ! Component: 150 - total flux cleaned = 0.000239945 Jy ! Component: 200 - total flux cleaned = 0.000273379 Jy ! Total flux subtracted in 200 components = 0.000273379 Jy ! Clean residual min=-0.000433 max=0.000427 Jy/beam ! Clean residual mean=-0.000000 rms=0.000119 Jy/beam ! Combined flux in latest and established models = 0.109376 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 190 components and 0.109376 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9594 mas, bmaj=1.426 mas, bpa=-16.1 degrees ! Estimated noise=0.256669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.95161e-05 Jy ! Component: 100 - total flux cleaned = 0.000110847 Jy ! Component: 150 - total flux cleaned = 0.000208099 Jy ! Component: 200 - total flux cleaned = 0.00028846 Jy ! Total flux subtracted in 200 components = 0.00028846 Jy ! Clean residual min=-0.000450 max=0.000476 Jy/beam ! Clean residual mean=-0.000000 rms=0.000112 Jy/beam ! Combined flux in latest and established models = 0.109665 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 208 components and 0.109665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050030Jy sigma=0.454639 ! Fit after self-cal, rms=0.050028Jy sigma=0.454611 wmodel J2029+4926_X_map.mod ! Writing 208 model components to file: J2029+4926_X_map.mod wobs J2029+4926_X_uvs.fits ! Writing UV FITS file: J2029+4926_X_uvs.fits wwins J2029+4926_X_map.win ! wwins: Wrote 12 windows to J2029+4926_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.1473e-05 Jy ! Component: 100 - total flux cleaned = 8.54224e-05 Jy ! Component: 150 - total flux cleaned = 0.00010097 Jy ! Component: 200 - total flux cleaned = 0.000131143 Jy ! Component: 250 - total flux cleaned = 0.000145865 Jy ! Component: 300 - total flux cleaned = 0.000153067 Jy ! Component: 350 - total flux cleaned = 0.000153021 Jy ! Component: 400 - total flux cleaned = 0.000167035 Jy ! Component: 450 - total flux cleaned = 0.000139166 Jy ! Component: 500 - total flux cleaned = 0.00012549 Jy ! Component: 550 - total flux cleaned = 0.000118772 Jy ! Component: 600 - total flux cleaned = 0.000132083 Jy ! Component: 650 - total flux cleaned = 0.000118849 Jy ! Component: 700 - total flux cleaned = 0.000132029 Jy ! Component: 750 - total flux cleaned = 0.000125644 Jy ! Component: 800 - total flux cleaned = 0.000144903 Jy ! Component: 850 - total flux cleaned = 0.000138526 Jy ! Component: 900 - total flux cleaned = 0.000157411 Jy ! Component: 950 - total flux cleaned = 0.000151119 Jy ! Component: 1000 - total flux cleaned = 0.000163461 Jy ! Component: 1050 - total flux cleaned = 0.000151203 Jy ! Component: 1100 - total flux cleaned = 0.000157305 Jy ! Component: 1150 - total flux cleaned = 0.00017536 Jy ! Component: 1200 - total flux cleaned = 0.000175272 Jy ! Component: 1250 - total flux cleaned = 0.000169324 Jy ! Component: 1300 - total flux cleaned = 0.000169379 Jy ! Component: 1350 - total flux cleaned = 0.000198476 Jy ! Component: 1400 - total flux cleaned = 0.000215861 Jy ! Component: 1450 - total flux cleaned = 0.000244561 Jy ! Component: 1500 - total flux cleaned = 0.000238841 Jy ! Component: 1550 - total flux cleaned = 0.000261472 Jy ! Component: 1600 - total flux cleaned = 0.000272704 Jy ! Component: 1650 - total flux cleaned = 0.00028386 Jy ! Component: 1700 - total flux cleaned = 0.000289427 Jy ! Component: 1750 - total flux cleaned = 0.000316911 Jy ! Component: 1800 - total flux cleaned = 0.000316897 Jy ! Component: 1850 - total flux cleaned = 0.000322368 Jy ! Component: 1900 - total flux cleaned = 0.000338657 Jy ! Component: 1950 - total flux cleaned = 0.000333351 Jy ! Component: 2000 - total flux cleaned = 0.00034405 Jy ! Component: 2050 - total flux cleaned = 0.000370706 Jy ! Component: 2100 - total flux cleaned = 0.000391826 Jy ! Component: 2150 - total flux cleaned = 0.000376077 Jy ! Component: 2200 - total flux cleaned = 0.00039174 Jy ! Component: 2250 - total flux cleaned = 0.000412485 Jy ! Component: 2300 - total flux cleaned = 0.000422813 Jy ! Component: 2350 - total flux cleaned = 0.000422781 Jy ! Component: 2400 - total flux cleaned = 0.000438098 Jy ! Component: 2450 - total flux cleaned = 0.00043303 Jy ! Component: 2500 - total flux cleaned = 0.000458326 Jy ! Component: 2550 - total flux cleaned = 0.000458336 Jy ! Component: 2600 - total flux cleaned = 0.000478397 Jy ! Component: 2650 - total flux cleaned = 0.000478374 Jy ! Component: 2700 - total flux cleaned = 0.000498204 Jy ! Component: 2750 - total flux cleaned = 0.000508019 Jy ! Component: 2800 - total flux cleaned = 0.000522703 Jy ! Component: 2850 - total flux cleaned = 0.000527618 Jy ! Component: 2900 - total flux cleaned = 0.000522779 Jy ! Component: 2950 - total flux cleaned = 0.000522784 Jy ! Component: 3000 - total flux cleaned = 0.000546845 Jy ! Component: 3050 - total flux cleaned = 0.000542047 Jy ! Component: 3100 - total flux cleaned = 0.000546832 Jy ! Component: 3150 - total flux cleaned = 0.00056579 Jy ! Component: 3200 - total flux cleaned = 0.000575215 Jy ! Component: 3250 - total flux cleaned = 0.000575236 Jy ! Component: 3300 - total flux cleaned = 0.000579903 Jy ! Component: 3350 - total flux cleaned = 0.000593919 Jy ! Component: 3400 - total flux cleaned = 0.000607825 Jy ! Component: 3450 - total flux cleaned = 0.000607812 Jy ! Component: 3500 - total flux cleaned = 0.000607809 Jy ! Component: 3550 - total flux cleaned = 0.000616923 Jy ! Component: 3600 - total flux cleaned = 0.000616955 Jy ! Component: 3650 - total flux cleaned = 0.00059881 Jy ! Component: 3700 - total flux cleaned = 0.000607828 Jy ! Component: 3750 - total flux cleaned = 0.000621301 Jy ! Component: 3800 - total flux cleaned = 0.000621305 Jy ! Component: 3850 - total flux cleaned = 0.000630219 Jy ! Component: 3900 - total flux cleaned = 0.000607973 Jy ! Component: 3950 - total flux cleaned = 0.000616852 Jy ! Component: 4000 - total flux cleaned = 0.000621262 Jy ! Component: 4050 - total flux cleaned = 0.00061245 Jy ! Total flux subtracted in 4096 components = 0.000586145 Jy ! Clean residual min=-0.000285 max=0.000249 Jy/beam ! Clean residual mean=0.000000 rms=0.000075 Jy/beam ! Combined flux in latest and established models = 0.110251 Jy keep ! Adding 338 model components to the UV plane model. ! The established model now contains 546 components and 0.110251 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2029+4926_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9594 x 1.426 at -16.1 degrees (North through East) ! Clean map min=-0.00047059 max=0.055012 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2029+4926_X_map.fits wmodel /image_prod/ug002_uva//J2029+4926_X_map.mod ! Writing 546 model components to file: /image_prod/ug002_uva//J2029+4926_X_map.mod wobs /image_prod/ug002_uva//J2029+4926_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2029+4926_X_uvs.fits wwins /image_prod/ug002_uva//J2029+4926_X_map.win ! wwins: Wrote 13 windows to /image_prod/ug002_uva//J2029+4926_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0550122 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 7.53751e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.411046 0.411046 0.822091 1.64418 3.28837 6.57673 13.1535 26.3069 52.6138 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 729.845 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2029+4926_X_dfm.log closed on Thu Mar 5 04:48:20 2020