! Started logfile: /image_prod/ug002_uva//J2023-0123_S_dfm.log on Thu Mar  5 04:46:17 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2023-0123_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2023-0123_S_uva.fits
! AN table 1: 60 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.990476 visibilities/baseline/integration-bin.
! Found source: J2023-0123
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4992 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2023-0123_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.008783Jy  sigma=7.710759
! Fit after  self-cal, rms=0.910792Jy  sigma=6.973862
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.795 mas, bmaj=14.03 mas, bpa=-18.15 degrees
! Estimated noise=1.71735 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0676839 Jy
! Component: 100  -  total flux cleaned = 0.0836184 Jy
! Total flux subtracted in 100 components = 0.0836184 Jy
! Clean residual min=-0.004940 max=0.006680 Jy/beam
! Clean residual mean=0.000001 rms=0.001323 Jy/beam
! Combined flux in latest and established models = 0.0836184 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0836184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080564Jy  sigma=0.470475
! Fit after  self-cal, rms=0.080280Jy  sigma=0.467604
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.251 mas, bmaj=14.57 mas, bpa=-17.6 degrees
! Estimated noise=1.37958 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00814576 Jy
! Component: 100  -  total flux cleaned = 0.00890993 Jy
! Component: 150  -  total flux cleaned = 0.00867608 Jy
! Component: 200  -  total flux cleaned = 0.00837842 Jy
! Total flux subtracted in 200 components = 0.00837842 Jy
! Clean residual min=-0.003900 max=0.003957 Jy/beam
! Clean residual mean=-0.000005 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.0919968 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 28 components and 0.0919969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078965Jy  sigma=0.460780
! Fit after  self-cal, rms=0.078922Jy  sigma=0.460699
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.251 x 14.57 at -17.6 degrees (North through East)
! Clean map  min=-0.0038269  max=0.089481 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.85     HN        0.98     KP        0.92     
!   LA        1.09     MK        1.14     NL        1.07     OV        1.11     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        0.89     HN        0.95     KP        0.99     
!   LA        1.10     MK        1.04     NL        1.10     OV        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.90     HN        0.96     KP        0.99     
!   LA        1.07     MK        0.96     NL        1.05     OV        1.10     
! 
! 
! Fit before self-cal, rms=0.078922Jy  sigma=0.460699
! Fit after  self-cal, rms=0.076499Jy  sigma=0.454259
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.287 mas, bmaj=14.28 mas, bpa=-17.35 degrees
! Estimated noise=1.37307 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000270126 Jy
! Component: 100  -  total flux cleaned = -0.000100123 Jy
! Component: 150  -  total flux cleaned = 1.55255e-06 Jy
! Component: 200  -  total flux cleaned = -2.84125e-05 Jy
! Total flux subtracted in 200 components = -2.84125e-05 Jy
! Clean residual min=-0.002941 max=0.002699 Jy/beam
! Clean residual mean=-0.000004 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.0919684 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 45 components and 0.0919684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076414Jy  sigma=0.454022
! Fit after  self-cal, rms=0.076507Jy  sigma=0.453786
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076507Jy  sigma=0.453786
! Fit after  self-cal, rms=0.074260Jy  sigma=0.450009
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.279 mas, bmaj=14.35 mas, bpa=-17.31 degrees
! Estimated noise=1.38047 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.23462e-05 Jy
! Component: 100  -  total flux cleaned = -0.000157612 Jy
! Component: 150  -  total flux cleaned = -0.000324719 Jy
! Component: 200  -  total flux cleaned = -0.000377626 Jy
! Total flux subtracted in 200 components = -0.000377626 Jy
! Clean residual min=-0.001950 max=0.002164 Jy/beam
! Clean residual mean=0.000001 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.0915908 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.0915908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074227Jy  sigma=0.449940
! Fit after  self-cal, rms=0.074224Jy  sigma=0.449886
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.47902e-06 Jy
! Component: 100  -  total flux cleaned = -2.28623e-05 Jy
! Component: 150  -  total flux cleaned = -3.50197e-05 Jy
! Component: 200  -  total flux cleaned = -4.63382e-05 Jy
! Total flux subtracted in 200 components = -4.63382e-05 Jy
! Clean residual min=-0.001889 max=0.002148 Jy/beam
! Clean residual mean=0.000001 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.0915445 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 0.0915445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074216Jy  sigma=0.449859
! Fit after  self-cal, rms=0.074215Jy  sigma=0.449855
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074215Jy  sigma=0.449855
! Fit after  self-cal, rms=0.073253Jy  sigma=0.449206
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.282 mas, bmaj=14.29 mas, bpa=-17.29 degrees
! Estimated noise=1.38071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000363033 Jy
! Component: 100  -  total flux cleaned = 0.000476815 Jy
! Component: 150  -  total flux cleaned = 0.000584934 Jy
! Component: 200  -  total flux cleaned = 0.000664213 Jy
! Total flux subtracted in 200 components = 0.000664213 Jy
! Clean residual min=-0.001798 max=0.002009 Jy/beam
! Clean residual mean=0.000002 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.0922087 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 81 components and 0.0922087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073249Jy  sigma=0.449136
! Fit after  self-cal, rms=0.073248Jy  sigma=0.449121
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.50575e-05 Jy
! Component: 100  -  total flux cleaned = 9.34502e-05 Jy
! Component: 150  -  total flux cleaned = 9.34785e-05 Jy
! Component: 200  -  total flux cleaned = 8.49027e-05 Jy
! Total flux subtracted in 200 components = 8.49027e-05 Jy
! Clean residual min=-0.001757 max=0.001984 Jy/beam
! Clean residual mean=0.000002 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.0922936 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 92 components and 0.0922936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073246Jy  sigma=0.449100
! Fit after  self-cal, rms=0.073245Jy  sigma=0.449098
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073245Jy  sigma=0.449098
! Fit after  self-cal, rms=0.073051Jy  sigma=0.449083
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.18 mas, bmaj=14.37 mas, bpa=-11.13 degrees
! Estimated noise=1.66555 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000357772 Jy
! Component: 100  -  total flux cleaned = 0.000473685 Jy
! Component: 150  -  total flux cleaned = 0.000529363 Jy
! Component: 200  -  total flux cleaned = 0.000565394 Jy
! Total flux subtracted in 200 components = 0.000565394 Jy
! Clean residual min=-0.002080 max=0.002162 Jy/beam
! Clean residual mean=0.000003 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.092859 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 105 components and 0.092859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073052Jy  sigma=0.449071
! Fit after  self-cal, rms=0.073052Jy  sigma=0.449069
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.58716e-05 Jy
! Component: 100  -  total flux cleaned = 5.60765e-05 Jy
! Component: 150  -  total flux cleaned = 8.15414e-05 Jy
! Component: 200  -  total flux cleaned = 0.000104923 Jy
! Total flux subtracted in 200 components = 0.000104923 Jy
! Clean residual min=-0.002068 max=0.002169 Jy/beam
! Clean residual mean=0.000003 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.0929639 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 115 components and 0.0929639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073053Jy  sigma=0.449075
! Fit after  self-cal, rms=0.073054Jy  sigma=0.449074
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.284 mas, bmaj=14.25 mas, bpa=-17.29 degrees
! Estimated noise=1.38162 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.284 x 14.25 at -17.29 degrees (North through East)
! Clean map  min=-0.0019505  max=0.089477 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.818 mas, bmaj=13.8 mas, bpa=-17.78 degrees
! Estimated noise=1.74504 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0689385 Jy
! Component: 100  -  total flux cleaned = 0.0846737 Jy
! Component: 150  -  total flux cleaned = 0.0904598 Jy
! Component: 200  -  total flux cleaned = 0.0911897 Jy
! Total flux subtracted in 200 components = 0.0911897 Jy
! Clean residual min=-0.002846 max=0.003066 Jy/beam
! Clean residual mean=0.000002 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.0911897 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0911897 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.284 mas, bmaj=14.25 mas, bpa=-17.29 degrees
! Estimated noise=1.38162 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6, 61).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169341 Jy
! Component: 100  -  total flux cleaned = 0.00200248 Jy
! Component: 150  -  total flux cleaned = 0.00188084 Jy
! Component: 200  -  total flux cleaned = 0.00192999 Jy
! Total flux subtracted in 200 components = 0.00192999 Jy
! Clean residual min=-0.001752 max=0.001846 Jy/beam
! Clean residual mean=0.000002 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.0931197 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 44 components and 0.0931197 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.18 mas, bmaj=14.37 mas, bpa=-11.13 degrees
! Estimated noise=1.66555 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000294471 Jy
! Component: 100  -  total flux cleaned = 0.000711642 Jy
! Component: 150  -  total flux cleaned = 0.000711573 Jy
! Component: 200  -  total flux cleaned = 0.00068216 Jy
! Total flux subtracted in 200 components = 0.00068216 Jy
! Clean residual min=-0.001981 max=0.002023 Jy/beam
! Clean residual mean=0.000004 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.0938019 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.51919e-05 Jy
! Component: 100  -  total flux cleaned = -4.78352e-05 Jy
! Component: 150  -  total flux cleaned = -4.72995e-05 Jy
! Component: 200  -  total flux cleaned = -8.81982e-05 Jy
! Total flux subtracted in 200 components = -8.81982e-05 Jy
! Clean residual min=-0.001962 max=0.001969 Jy/beam
! Clean residual mean=0.000004 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.0937137 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 95 components and 0.0937137 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.284 mas, bmaj=14.25 mas, bpa=-17.29 degrees
! Estimated noise=1.38162 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.53156e-05 Jy
! Component: 100  -  total flux cleaned = 5.20374e-05 Jy
! Component: 150  -  total flux cleaned = -7.65845e-06 Jy
! Component: 200  -  total flux cleaned = -6.10587e-05 Jy
! Total flux subtracted in 200 components = -6.10587e-05 Jy
! Clean residual min=-0.001703 max=0.001721 Jy/beam
! Clean residual mean=0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.0936526 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 114 components and 0.0936526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072999Jy  sigma=0.448614
! Fit after  self-cal, rms=0.073003Jy  sigma=0.448549
wmodel J2023-0123_S_map.mod
! Writing 114 model components to file: J2023-0123_S_map.mod
wobs   J2023-0123_S_uvs.fits
! Writing UV FITS file: J2023-0123_S_uvs.fits
wwins  J2023-0123_S_map.win
! wwins: Wrote 2 windows to J2023-0123_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000287559 Jy
! Component: 100  -  total flux cleaned = 0.000378 Jy
! Component: 150  -  total flux cleaned = 0.000462935 Jy
! Component: 200  -  total flux cleaned = 0.000489101 Jy
! Component: 250  -  total flux cleaned = 0.000356857 Jy
! Component: 300  -  total flux cleaned = 0.000279944 Jy
! Component: 350  -  total flux cleaned = 0.000180468 Jy
! Component: 400  -  total flux cleaned = 0.000155975 Jy
! Component: 450  -  total flux cleaned = 0.000132382 Jy
! Component: 500  -  total flux cleaned = 8.71118e-05 Jy
! Component: 550  -  total flux cleaned = 6.51539e-05 Jy
! Component: 600  -  total flux cleaned = 6.53942e-05 Jy
! Component: 650  -  total flux cleaned = -6.38266e-05 Jy
! Component: 700  -  total flux cleaned = -8.47758e-05 Jy
! Component: 750  -  total flux cleaned = -0.000105452 Jy
! Component: 800  -  total flux cleaned = -0.000207955 Jy
! Component: 850  -  total flux cleaned = -0.000248693 Jy
! Component: 900  -  total flux cleaned = -0.000368018 Jy
! Component: 950  -  total flux cleaned = -0.000328456 Jy
! Component: 1000  -  total flux cleaned = -0.000387135 Jy
! Component: 1050  -  total flux cleaned = -0.000425221 Jy
! Component: 1100  -  total flux cleaned = -0.000349806 Jy
! Component: 1150  -  total flux cleaned = -0.000461711 Jy
! Component: 1200  -  total flux cleaned = -0.000388157 Jy
! Component: 1250  -  total flux cleaned = -0.000479357 Jy
! Component: 1300  -  total flux cleaned = -0.000496986 Jy
! Component: 1350  -  total flux cleaned = -0.000461323 Jy
! Component: 1400  -  total flux cleaned = -0.000461499 Jy
! Component: 1450  -  total flux cleaned = -0.000496249 Jy
! Component: 1500  -  total flux cleaned = -0.000478916 Jy
! Component: 1550  -  total flux cleaned = -0.000393935 Jy
! Component: 1600  -  total flux cleaned = -0.000444458 Jy
! Component: 1650  -  total flux cleaned = -0.000444575 Jy
! Component: 1700  -  total flux cleaned = -0.000444735 Jy
! Component: 1750  -  total flux cleaned = -0.000444623 Jy
! Component: 1800  -  total flux cleaned = -0.000428341 Jy
! Component: 1850  -  total flux cleaned = -0.000380269 Jy
! Component: 1900  -  total flux cleaned = -0.000427832 Jy
! Component: 1950  -  total flux cleaned = -0.00036497 Jy
! Component: 2000  -  total flux cleaned = -0.000333697 Jy
! Component: 2050  -  total flux cleaned = -0.000256512 Jy
! Component: 2100  -  total flux cleaned = -0.000256695 Jy
! Component: 2150  -  total flux cleaned = -0.000195901 Jy
! Component: 2200  -  total flux cleaned = -0.000180899 Jy
! Component: 2250  -  total flux cleaned = -0.00015096 Jy
! Component: 2300  -  total flux cleaned = -0.000136224 Jy
! Component: 2350  -  total flux cleaned = -4.80753e-05 Jy
! Component: 2400  -  total flux cleaned = -3.36739e-05 Jy
! Component: 2450  -  total flux cleaned = -4.87088e-06 Jy
! Component: 2500  -  total flux cleaned = 8.12286e-05 Jy
! Component: 2550  -  total flux cleaned = 0.000109716 Jy
! Component: 2600  -  total flux cleaned = 0.000180466 Jy
! Component: 2650  -  total flux cleaned = 0.000292877 Jy
! Component: 2700  -  total flux cleaned = 0.000334711 Jy
! Component: 2750  -  total flux cleaned = 0.000320908 Jy
! Component: 2800  -  total flux cleaned = 0.000417269 Jy
! Component: 2850  -  total flux cleaned = 0.000444373 Jy
! Component: 2900  -  total flux cleaned = 0.000444392 Jy
! Component: 2950  -  total flux cleaned = 0.000525072 Jy
! Component: 3000  -  total flux cleaned = 0.000511654 Jy
! Component: 3050  -  total flux cleaned = 0.000524973 Jy
! Component: 3100  -  total flux cleaned = 0.000604151 Jy
! Component: 3150  -  total flux cleaned = 0.000682786 Jy
! Component: 3200  -  total flux cleaned = 0.000695942 Jy
! Component: 3250  -  total flux cleaned = 0.000786292 Jy
! Component: 3300  -  total flux cleaned = 0.000837573 Jy
! Component: 3350  -  total flux cleaned = 0.000863165 Jy
! Component: 3400  -  total flux cleaned = 0.000951694 Jy
! Component: 3450  -  total flux cleaned = 0.000951694 Jy
! Component: 3500  -  total flux cleaned = 0.00100165 Jy
! Component: 3550  -  total flux cleaned = 0.0010513 Jy
! Component: 3600  -  total flux cleaned = 0.00113788 Jy
! Component: 3650  -  total flux cleaned = 0.0012361 Jy
! Component: 3700  -  total flux cleaned = 0.00127283 Jy
! Component: 3750  -  total flux cleaned = 0.00133344 Jy
! Component: 3800  -  total flux cleaned = 0.00140579 Jy
! Component: 3850  -  total flux cleaned = 0.00146569 Jy
! Component: 3900  -  total flux cleaned = 0.00153728 Jy
! Component: 3950  -  total flux cleaned = 0.00158468 Jy
! Component: 4000  -  total flux cleaned = 0.0016438 Jy
! Component: 4050  -  total flux cleaned = 0.00170239 Jy
! Total flux subtracted in 4096 components = 0.00178413 Jy
! Clean residual min=-0.000646 max=0.000791 Jy/beam
! Clean residual mean=0.000001 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0954367 Jy
keep
! Adding 275 model components to the UV plane model.
! The established model now contains 389 components and 0.0954368 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2023-0123_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.284 x 14.25 at -17.29 degrees (North through East)
! Clean map  min=-0.0019302  max=0.089362 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2023-0123_S_map.fits
wmodel /image_prod/ug002_uva//J2023-0123_S_map.mod
! Writing 389 model components to file: /image_prod/ug002_uva//J2023-0123_S_map.mod
wobs   /image_prod/ug002_uva//J2023-0123_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2023-0123_S_uvs.fits
wwins  /image_prod/ug002_uva//J2023-0123_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J2023-0123_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0893615 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000218729 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.734307 0.734307 1.46861 2.93723 5.87445 11.7489 23.4978 46.9956 93.9913
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.089 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  408.548 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2023-0123_S_dfm.log closed on Thu Mar  5 04:46:20 2020