! Started logfile: /image_prod/ug002_uva//J2022-2007_S_dfm.log on Thu Mar 5 04:45:03 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2022-2007_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2022-2007_S_uva.fits ! AN table 1: 50 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.997143 visibilities/baseline/integration-bin. ! Found source: J2022-2007 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4188 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2022-2007_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.050513Jy sigma=6.714587 ! Fit after self-cal, rms=0.749717Jy sigma=4.667195 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=14.45 mas, bpa=-17.73 degrees ! Estimated noise=2.56225 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202392 Jy ! Component: 100 - total flux cleaned = 0.29431 Jy ! Total flux subtracted in 100 components = 0.29431 Jy ! Clean residual min=-0.026262 max=0.046472 Jy/beam ! Clean residual mean=0.000134 rms=0.009176 Jy/beam ! Combined flux in latest and established models = 0.29431 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.29431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.155075Jy sigma=0.984925 ! Fit after self-cal, rms=0.154760Jy sigma=0.983095 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=14.93 mas, bpa=-17.61 degrees ! Estimated noise=1.79256 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0785603 Jy ! Component: 100 - total flux cleaned = 0.129237 Jy ! Component: 150 - total flux cleaned = 0.16639 Jy ! Component: 200 - total flux cleaned = 0.19457 Jy ! Total flux subtracted in 200 components = 0.19457 Jy ! Clean residual min=-0.013908 max=0.022864 Jy/beam ! Clean residual mean=0.000078 rms=0.004858 Jy/beam ! Combined flux in latest and established models = 0.488881 Jy ! Performing phase self-cal ! Adding 102 model components to the UV plane model. ! The established model now contains 132 components and 0.488881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103915Jy sigma=0.564325 ! Fit after self-cal, rms=0.103174Jy sigma=0.561888 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.112 x 14.93 at -17.61 degrees (North through East) ! Clean map min=-0.013489 max=0.25832 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.90 HN 1.10 KP 0.91 ! LA 0.96 MK 1.13 NL 1.06 OV 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.90 HN 1.09 KP 0.93 ! LA 0.97 MK 1.05 NL 1.11 OV 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 0.93 HN 1.07 KP 0.92 ! LA 0.99 MK 1.11 NL 1.05 OV 1.00 ! ! ! Fit before self-cal, rms=0.103174Jy sigma=0.561888 ! Fit after self-cal, rms=0.109560Jy sigma=0.483993 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=15.54 mas, bpa=-17.47 degrees ! Estimated noise=1.80646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010258 Jy ! Component: 100 - total flux cleaned = 0.00961127 Jy ! Component: 150 - total flux cleaned = 0.00867837 Jy ! Component: 200 - total flux cleaned = 0.00868958 Jy ! Total flux subtracted in 200 components = 0.00868958 Jy ! Clean residual min=-0.007534 max=0.011087 Jy/beam ! Clean residual mean=0.000010 rms=0.002258 Jy/beam ! Combined flux in latest and established models = 0.49757 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 162 components and 0.49757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105841Jy sigma=0.467251 ! Fit after self-cal, rms=0.105696Jy sigma=0.465939 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105696Jy sigma=0.465939 ! Fit after self-cal, rms=0.102181Jy sigma=0.461599 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=15.43 mas, bpa=-17.51 degrees ! Estimated noise=1.80378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668838 Jy ! Component: 100 - total flux cleaned = 0.00857675 Jy ! Component: 150 - total flux cleaned = 0.00919653 Jy ! Component: 200 - total flux cleaned = 0.00937473 Jy ! Total flux subtracted in 200 components = 0.00937473 Jy ! Clean residual min=-0.005788 max=0.009565 Jy/beam ! Clean residual mean=0.000006 rms=0.001784 Jy/beam ! Combined flux in latest and established models = 0.506945 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 194 components and 0.506945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100542Jy sigma=0.455771 ! Fit after self-cal, rms=0.100347Jy sigma=0.455407 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, -48.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570196 Jy ! Component: 100 - total flux cleaned = 0.00466924 Jy ! Component: 150 - total flux cleaned = 0.00355658 Jy ! Component: 200 - total flux cleaned = 0.00321736 Jy ! Total flux subtracted in 200 components = 0.00321736 Jy ! Clean residual min=-0.005158 max=0.005689 Jy/beam ! Clean residual mean=0.000004 rms=0.001480 Jy/beam ! Combined flux in latest and established models = 0.510162 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 220 components and 0.510162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098590Jy sigma=0.450043 ! Fit after self-cal, rms=0.098513Jy sigma=0.449861 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098513Jy sigma=0.449861 ! Fit after self-cal, rms=0.096176Jy sigma=0.448645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.249 mas, bmaj=15.34 mas, bpa=-17.44 degrees ! Estimated noise=1.80216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181783 Jy ! Component: 100 - total flux cleaned = 0.00228417 Jy ! Component: 150 - total flux cleaned = 0.00269442 Jy ! Component: 200 - total flux cleaned = 0.00269058 Jy ! Total flux subtracted in 200 components = 0.00269058 Jy ! Clean residual min=-0.004889 max=0.004905 Jy/beam ! Clean residual mean=0.000004 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.512853 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 238 components and 0.512853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095472Jy sigma=0.446441 ! Fit after self-cal, rms=0.095414Jy sigma=0.446339 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153711 Jy ! Component: 100 - total flux cleaned = 4.02053e-05 Jy ! Component: 150 - total flux cleaned = -7.11679e-05 Jy ! Component: 200 - total flux cleaned = -0.000364522 Jy ! Total flux subtracted in 200 components = -0.000364522 Jy ! Clean residual min=-0.004683 max=0.004581 Jy/beam ! Clean residual mean=0.000005 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.512489 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 258 components and 0.512489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094994Jy sigma=0.445291 ! Fit after self-cal, rms=0.094967Jy sigma=0.445239 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094967Jy sigma=0.445239 ! Fit after self-cal, rms=0.093396Jy sigma=0.444872 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.293 mas, bmaj=20.03 mas, bpa=-5.841 degrees ! Estimated noise=2.15605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180709 Jy ! Component: 100 - total flux cleaned = 0.00233798 Jy ! Component: 150 - total flux cleaned = 0.00233684 Jy ! Component: 200 - total flux cleaned = 0.0022062 Jy ! Total flux subtracted in 200 components = 0.0022062 Jy ! Clean residual min=-0.004954 max=0.005073 Jy/beam ! Clean residual mean=0.000007 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.514695 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 289 components and 0.514695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093188Jy sigma=0.444378 ! Fit after self-cal, rms=0.093151Jy sigma=0.444305 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436834 Jy ! Component: 100 - total flux cleaned = 0.000312037 Jy ! Component: 150 - total flux cleaned = 8.15831e-05 Jy ! Component: 200 - total flux cleaned = -8.4738e-05 Jy ! Total flux subtracted in 200 components = -8.4738e-05 Jy ! Clean residual min=-0.004965 max=0.004838 Jy/beam ! Clean residual mean=0.000007 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.51461 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 306 components and 0.51461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093014Jy sigma=0.444088 ! Fit after self-cal, rms=0.092993Jy sigma=0.444054 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=15.27 mas, bpa=-17.43 degrees ! Estimated noise=1.79901 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 15.27 at -17.43 degrees (North through East) ! Clean map min=-0.0062009 max=0.25703 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.716 mas, bmaj=14.65 mas, bpa=-17.65 degrees ! Estimated noise=2.63283 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203731 Jy ! Component: 100 - total flux cleaned = 0.292652 Jy ! Component: 150 - total flux cleaned = 0.346476 Jy ! Component: 200 - total flux cleaned = 0.385724 Jy ! Total flux subtracted in 200 components = 0.385724 Jy ! Clean residual min=-0.015980 max=0.022762 Jy/beam ! Clean residual mean=0.000067 rms=0.005198 Jy/beam ! Combined flux in latest and established models = 0.385724 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 78 model components to the UV plane model. ! The established model now contains 78 components and 0.385724 Jy ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=15.27 mas, bpa=-17.43 degrees ! Estimated noise=1.79901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0400456 Jy ! Component: 100 - total flux cleaned = 0.0682817 Jy ! Component: 150 - total flux cleaned = 0.0892769 Jy ! Component: 200 - total flux cleaned = 0.10515 Jy ! Total flux subtracted in 200 components = 0.10515 Jy ! Clean residual min=-0.007815 max=0.009232 Jy/beam ! Clean residual mean=0.000021 rms=0.002420 Jy/beam ! Combined flux in latest and established models = 0.490874 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 154 components and 0.490874 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.293 mas, bmaj=20.03 mas, bpa=-5.841 degrees ! Estimated noise=2.15605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168284 Jy ! Component: 100 - total flux cleaned = 0.0243776 Jy ! Component: 150 - total flux cleaned = 0.02725 Jy ! Component: 200 - total flux cleaned = 0.0282766 Jy ! Total flux subtracted in 200 components = 0.0282766 Jy ! Clean residual min=-0.005665 max=0.005786 Jy/beam ! Clean residual mean=0.000002 rms=0.001669 Jy/beam ! Combined flux in latest and established models = 0.519151 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000466678 Jy ! Component: 100 - total flux cleaned = -0.000845416 Jy ! Component: 150 - total flux cleaned = -0.00116769 Jy ! Component: 200 - total flux cleaned = -0.00131235 Jy ! Total flux subtracted in 200 components = -0.00131235 Jy ! Clean residual min=-0.004765 max=0.005314 Jy/beam ! Clean residual mean=0.000004 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.517838 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 219 components and 0.517838 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=15.27 mas, bpa=-17.43 degrees ! Estimated noise=1.79901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106256 Jy ! Component: 100 - total flux cleaned = 0.00160594 Jy ! Component: 150 - total flux cleaned = 0.00160693 Jy ! Component: 200 - total flux cleaned = 0.00176598 Jy ! Total flux subtracted in 200 components = 0.00176598 Jy ! Clean residual min=-0.004406 max=0.004820 Jy/beam ! Clean residual mean=0.000002 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.519604 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 252 components and 0.519604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094147Jy sigma=0.446394 ! Fit after self-cal, rms=0.094080Jy sigma=0.446074 wmodel J2022-2007_S_map.mod ! Writing 252 model components to file: J2022-2007_S_map.mod wobs J2022-2007_S_uvs.fits ! Writing UV FITS file: J2022-2007_S_uvs.fits wwins J2022-2007_S_map.win ! wwins: Wrote 3 windows to J2022-2007_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202811 Jy ! Component: 100 - total flux cleaned = 0.00370492 Jy ! Component: 150 - total flux cleaned = 0.00511583 Jy ! Component: 200 - total flux cleaned = 0.00637701 Jy ! Component: 250 - total flux cleaned = 0.00751249 Jy ! Component: 300 - total flux cleaned = 0.00847206 Jy ! Component: 350 - total flux cleaned = 0.00915154 Jy ! Component: 400 - total flux cleaned = 0.00980537 Jy ! Component: 450 - total flux cleaned = 0.010322 Jy ! Component: 500 - total flux cleaned = 0.0107105 Jy ! Component: 550 - total flux cleaned = 0.0109803 Jy ! Component: 600 - total flux cleaned = 0.0113454 Jy ! Component: 650 - total flux cleaned = 0.0117001 Jy ! Component: 700 - total flux cleaned = 0.0119963 Jy ! Component: 750 - total flux cleaned = 0.0123337 Jy ! Component: 800 - total flux cleaned = 0.0126628 Jy ! Component: 850 - total flux cleaned = 0.012847 Jy ! Component: 900 - total flux cleaned = 0.0131618 Jy ! Component: 950 - total flux cleaned = 0.0134708 Jy ! Component: 1000 - total flux cleaned = 0.01386 Jy ! Component: 1050 - total flux cleaned = 0.0140727 Jy ! Component: 1100 - total flux cleaned = 0.0144897 Jy ! Component: 1150 - total flux cleaned = 0.0147754 Jy ! Component: 1200 - total flux cleaned = 0.0151351 Jy ! Component: 1250 - total flux cleaned = 0.0153313 Jy ! Component: 1300 - total flux cleaned = 0.0155237 Jy ! Component: 1350 - total flux cleaned = 0.0158279 Jy ! Component: 1400 - total flux cleaned = 0.0160515 Jy ! Component: 1450 - total flux cleaned = 0.0162346 Jy ! Component: 1500 - total flux cleaned = 0.0162708 Jy ! Component: 1550 - total flux cleaned = 0.0165197 Jy ! Component: 1600 - total flux cleaned = 0.0167286 Jy ! Component: 1650 - total flux cleaned = 0.0168658 Jy ! Component: 1700 - total flux cleaned = 0.016933 Jy ! Component: 1750 - total flux cleaned = 0.0170002 Jy ! Component: 1800 - total flux cleaned = 0.0171977 Jy ! Component: 1850 - total flux cleaned = 0.0172621 Jy ! Component: 1900 - total flux cleaned = 0.0173261 Jy ! Component: 1950 - total flux cleaned = 0.0173892 Jy ! Component: 2000 - total flux cleaned = 0.0173894 Jy ! Component: 2050 - total flux cleaned = 0.0175427 Jy ! Component: 2100 - total flux cleaned = 0.0175429 Jy ! Component: 2150 - total flux cleaned = 0.0176029 Jy ! Component: 2200 - total flux cleaned = 0.0176616 Jy ! Component: 2250 - total flux cleaned = 0.0176622 Jy ! Component: 2300 - total flux cleaned = 0.017691 Jy ! Component: 2350 - total flux cleaned = 0.0176909 Jy ! Component: 2400 - total flux cleaned = 0.0177748 Jy ! Component: 2450 - total flux cleaned = 0.0177748 Jy ! Component: 2500 - total flux cleaned = 0.0178289 Jy ! Component: 2550 - total flux cleaned = 0.0178552 Jy ! Component: 2600 - total flux cleaned = 0.0178022 Jy ! Component: 2650 - total flux cleaned = 0.0178285 Jy ! Component: 2700 - total flux cleaned = 0.0178537 Jy ! Component: 2750 - total flux cleaned = 0.0177257 Jy ! Component: 2800 - total flux cleaned = 0.0177005 Jy ! Component: 2850 - total flux cleaned = 0.0176008 Jy ! Component: 2900 - total flux cleaned = 0.0175763 Jy ! Component: 2950 - total flux cleaned = 0.017601 Jy ! Component: 3000 - total flux cleaned = 0.0176011 Jy ! Component: 3050 - total flux cleaned = 0.017529 Jy ! Component: 3100 - total flux cleaned = 0.0174108 Jy ! Component: 3150 - total flux cleaned = 0.0174104 Jy ! Component: 3200 - total flux cleaned = 0.0173174 Jy ! Component: 3250 - total flux cleaned = 0.0172259 Jy ! Component: 3300 - total flux cleaned = 0.0172034 Jy ! Component: 3350 - total flux cleaned = 0.0171588 Jy ! Component: 3400 - total flux cleaned = 0.017159 Jy ! Component: 3450 - total flux cleaned = 0.017115 Jy ! Component: 3500 - total flux cleaned = 0.0170712 Jy ! Component: 3550 - total flux cleaned = 0.016985 Jy ! Component: 3600 - total flux cleaned = 0.0170062 Jy ! Component: 3650 - total flux cleaned = 0.0170057 Jy ! Component: 3700 - total flux cleaned = 0.0169005 Jy ! Component: 3750 - total flux cleaned = 0.0167966 Jy ! Component: 3800 - total flux cleaned = 0.0168175 Jy ! Component: 3850 - total flux cleaned = 0.016756 Jy ! Component: 3900 - total flux cleaned = 0.0166952 Jy ! Component: 3950 - total flux cleaned = 0.0166951 Jy ! Component: 4000 - total flux cleaned = 0.0165751 Jy ! Component: 4050 - total flux cleaned = 0.0165157 Jy ! Total flux subtracted in 4096 components = 0.0164567 Jy ! Clean residual min=-0.000999 max=0.001045 Jy/beam ! Clean residual mean=0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.536061 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 506 components and 0.536062 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2022-2007_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 15.27 at -17.43 degrees (North through East) ! Clean map min=-0.0047188 max=0.25851 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2022-2007_S_map.fits wmodel /image_prod/ug002_uva//J2022-2007_S_map.mod ! Writing 506 model components to file: /image_prod/ug002_uva//J2022-2007_S_map.mod wobs /image_prod/ug002_uva//J2022-2007_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2022-2007_S_uvs.fits wwins /image_prod/ug002_uva//J2022-2007_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2022-2007_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.258509 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000368306 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.42742 0.42742 0.85484 1.70968 3.41936 6.83872 13.6774 27.3549 54.7098 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.258 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 701.885 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2022-2007_S_dfm.log closed on Thu Mar 5 04:45:07 2020