! Started logfile: /image_prod/ug002_uva//J2018-1109_S_dfm.log on Thu Mar 5 04:43:38 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2018-1109_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2018-1109_S_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.875556 visibilities/baseline/integration-bin. ! Found source: J2018-1109 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4728 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2018-1109_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.046719Jy sigma=8.136523 ! Fit after self-cal, rms=0.720379Jy sigma=5.620398 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=7.777 mas, bpa=-9.62 degrees ! Estimated noise=1.70561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224704 Jy ! Component: 100 - total flux cleaned = 0.273983 Jy ! Total flux subtracted in 100 components = 0.273983 Jy ! Clean residual min=-0.016209 max=0.014999 Jy/beam ! Clean residual mean=0.000026 rms=0.004137 Jy/beam ! Combined flux in latest and established models = 0.273983 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.273983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088281Jy sigma=0.620971 ! Fit after self-cal, rms=0.088281Jy sigma=0.620950 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=9.163 mas, bpa=-9.139 degrees ! Estimated noise=1.36448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107662 Jy ! Component: 100 - total flux cleaned = 0.0155489 Jy ! Component: 150 - total flux cleaned = 0.0173045 Jy ! Component: 200 - total flux cleaned = 0.0173073 Jy ! Total flux subtracted in 200 components = 0.0173073 Jy ! Clean residual min=-0.014703 max=0.009734 Jy/beam ! Clean residual mean=-0.000006 rms=0.003183 Jy/beam ! Combined flux in latest and established models = 0.29129 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.29129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086941Jy sigma=0.612185 ! Fit after self-cal, rms=0.086948Jy sigma=0.612171 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.497 x 9.163 at -9.139 degrees (North through East) ! Clean map min=-0.01455 max=0.28363 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.07 HN 1.07 KP 1.06 ! LA 1.06 MK 1.03 NL 1.08 OV 0.67 ! PT 1.08 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 1.03 KP 1.03 ! LA 1.05 MK 0.96 NL 1.05 OV 0.97 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.06 HN 1.05 KP 1.03 ! LA 1.07 MK 1.02 NL 0.94 OV 0.64 ! PT 1.04 SC 1.05 ! ! ! Fit before self-cal, rms=0.086948Jy sigma=0.612171 ! Fit after self-cal, rms=0.066368Jy sigma=0.466919 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=9.157 mas, bpa=-8.967 degrees ! Estimated noise=1.35858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00242828 Jy ! Component: 100 - total flux cleaned = -0.00286237 Jy ! Component: 150 - total flux cleaned = -0.00302219 Jy ! Component: 200 - total flux cleaned = -0.00312396 Jy ! Total flux subtracted in 200 components = -0.00312396 Jy ! Clean residual min=-0.004496 max=0.004871 Jy/beam ! Clean residual mean=0.000008 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.288166 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.288166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066262Jy sigma=0.466121 ! Fit after self-cal, rms=0.066377Jy sigma=0.465491 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066377Jy sigma=0.465491 ! Fit after self-cal, rms=0.065713Jy sigma=0.453830 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=9.15 mas, bpa=-9.037 degrees ! Estimated noise=1.35847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000204542 Jy ! Component: 100 - total flux cleaned = -0.000235256 Jy ! Component: 150 - total flux cleaned = -0.000264375 Jy ! Component: 200 - total flux cleaned = -0.000316458 Jy ! Total flux subtracted in 200 components = -0.000316458 Jy ! Clean residual min=-0.002318 max=0.002232 Jy/beam ! Clean residual mean=0.000003 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.28785 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.28785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065681Jy sigma=0.453657 ! Fit after self-cal, rms=0.065692Jy sigma=0.453633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.95506e-07 Jy ! Component: 100 - total flux cleaned = -2.40914e-05 Jy ! Component: 150 - total flux cleaned = -4.71733e-05 Jy ! Component: 200 - total flux cleaned = -8.88567e-05 Jy ! Total flux subtracted in 200 components = -8.88567e-05 Jy ! Clean residual min=-0.002273 max=0.002227 Jy/beam ! Clean residual mean=0.000003 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.287761 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.287761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065673Jy sigma=0.453532 ! Fit after self-cal, rms=0.065673Jy sigma=0.453527 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065673Jy sigma=0.453527 ! Fit after self-cal, rms=0.065763Jy sigma=0.453510 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=9.159 mas, bpa=-9.066 degrees ! Estimated noise=1.35901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.84175e-05 Jy ! Component: 100 - total flux cleaned = -5.03586e-05 Jy ! Component: 150 - total flux cleaned = -9.26364e-05 Jy ! Component: 200 - total flux cleaned = -0.000112835 Jy ! Total flux subtracted in 200 components = -0.000112835 Jy ! Clean residual min=-0.002245 max=0.002227 Jy/beam ! Clean residual mean=0.000003 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.287648 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.287648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065745Jy sigma=0.453425 ! Fit after self-cal, rms=0.065747Jy sigma=0.453421 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.90121e-05 Jy ! Component: 100 - total flux cleaned = -1.85628e-05 Jy ! Component: 150 - total flux cleaned = -5.299e-05 Jy ! Component: 200 - total flux cleaned = -6.93968e-05 Jy ! Total flux subtracted in 200 components = -6.93968e-05 Jy ! Clean residual min=-0.002249 max=0.002225 Jy/beam ! Clean residual mean=0.000003 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.287579 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.287578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065735Jy sigma=0.453371 ! Fit after self-cal, rms=0.065736Jy sigma=0.453367 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065736Jy sigma=0.453367 ! Fit after self-cal, rms=0.065813Jy sigma=0.453357 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.938 mas, bmaj=15.9 mas, bpa=-0.4976 degrees ! Estimated noise=1.60523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253195 Jy ! Component: 100 - total flux cleaned = 0.00028636 Jy ! Component: 150 - total flux cleaned = 0.000305299 Jy ! Component: 200 - total flux cleaned = 0.000328696 Jy ! Total flux subtracted in 200 components = 0.000328696 Jy ! Clean residual min=-0.001956 max=0.002254 Jy/beam ! Clean residual mean=0.000004 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.287907 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.287907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065809Jy sigma=0.453326 ! Fit after self-cal, rms=0.065811Jy sigma=0.453321 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.22514e-06 Jy ! Component: 100 - total flux cleaned = 2.94724e-05 Jy ! Component: 150 - total flux cleaned = 4.13105e-05 Jy ! Component: 200 - total flux cleaned = 4.72238e-05 Jy ! Total flux subtracted in 200 components = 4.72238e-05 Jy ! Clean residual min=-0.001945 max=0.002254 Jy/beam ! Clean residual mean=0.000004 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.287954 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 45 components and 0.287954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065809Jy sigma=0.453311 ! Fit after self-cal, rms=0.065810Jy sigma=0.453307 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=9.164 mas, bpa=-9.086 degrees ! Estimated noise=1.35978 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 9.164 at -9.086 degrees (North through East) ! Clean map min=-0.0021378 max=0.28423 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=7.826 mas, bpa=-9.625 degrees ! Estimated noise=1.6735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22046 Jy ! Component: 100 - total flux cleaned = 0.26858 Jy ! Component: 150 - total flux cleaned = 0.280815 Jy ! Component: 200 - total flux cleaned = 0.285836 Jy ! Total flux subtracted in 200 components = 0.285836 Jy ! Clean residual min=-0.003287 max=0.003003 Jy/beam ! Clean residual mean=0.000006 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.285836 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.285836 Jy ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=9.164 mas, bpa=-9.086 degrees ! Estimated noise=1.35978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219906 Jy ! Component: 100 - total flux cleaned = 0.00232154 Jy ! Component: 150 - total flux cleaned = 0.00232257 Jy ! Component: 200 - total flux cleaned = 0.00228707 Jy ! Total flux subtracted in 200 components = 0.00228707 Jy ! Clean residual min=-0.002301 max=0.002193 Jy/beam ! Clean residual mean=0.000003 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.288123 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.288123 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.938 mas, bmaj=15.9 mas, bpa=-0.4976 degrees ! Estimated noise=1.60523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379591 Jy ! Component: 100 - total flux cleaned = 0.000380307 Jy ! Component: 150 - total flux cleaned = 0.000356608 Jy ! Component: 200 - total flux cleaned = 0.000335517 Jy ! Total flux subtracted in 200 components = 0.000335517 Jy ! Clean residual min=-0.001980 max=0.002284 Jy/beam ! Clean residual mean=0.000004 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.288458 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.87142e-05 Jy ! Component: 100 - total flux cleaned = -3.65384e-05 Jy ! Component: 150 - total flux cleaned = -6.15454e-05 Jy ! Component: 200 - total flux cleaned = -7.78216e-05 Jy ! Total flux subtracted in 200 components = -7.78216e-05 Jy ! Clean residual min=-0.001969 max=0.002284 Jy/beam ! Clean residual mean=0.000004 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.28838 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.28838 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=9.164 mas, bpa=-9.086 degrees ! Estimated noise=1.35978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.6871e-05 Jy ! Component: 100 - total flux cleaned = -0.000147936 Jy ! Component: 150 - total flux cleaned = -0.000217786 Jy ! Component: 200 - total flux cleaned = -0.0002846 Jy ! Total flux subtracted in 200 components = -0.0002846 Jy ! Clean residual min=-0.002266 max=0.002186 Jy/beam ! Clean residual mean=0.000003 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.288096 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.288096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065835Jy sigma=0.453504 ! Fit after self-cal, rms=0.065836Jy sigma=0.453482 wmodel J2018-1109_S_map.mod ! Writing 46 model components to file: J2018-1109_S_map.mod wobs J2018-1109_S_uvs.fits ! Writing UV FITS file: J2018-1109_S_uvs.fits wwins J2018-1109_S_map.win ! wwins: Wrote 1 windows to J2018-1109_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000333072 Jy ! Component: 100 - total flux cleaned = -0.000484894 Jy ! Component: 150 - total flux cleaned = -0.000523017 Jy ! Component: 200 - total flux cleaned = -0.000250343 Jy ! Component: 250 - total flux cleaned = -1.76924e-05 Jy ! Component: 300 - total flux cleaned = 0.000240416 Jy ! Component: 350 - total flux cleaned = 0.000428917 Jy ! Component: 400 - total flux cleaned = 0.000612882 Jy ! Component: 450 - total flux cleaned = 0.000702014 Jy ! Component: 500 - total flux cleaned = 0.000790237 Jy ! Component: 550 - total flux cleaned = 0.00087638 Jy ! Component: 600 - total flux cleaned = 0.000932357 Jy ! Component: 650 - total flux cleaned = 0.00104221 Jy ! Component: 700 - total flux cleaned = 0.00106801 Jy ! Component: 750 - total flux cleaned = 0.00112086 Jy ! Component: 800 - total flux cleaned = 0.00122415 Jy ! Component: 850 - total flux cleaned = 0.0013004 Jy ! Component: 900 - total flux cleaned = 0.00140042 Jy ! Component: 950 - total flux cleaned = 0.00157186 Jy ! Component: 1000 - total flux cleaned = 0.00164408 Jy ! Component: 1050 - total flux cleaned = 0.00178649 Jy ! Component: 1100 - total flux cleaned = 0.00187988 Jy ! Component: 1150 - total flux cleaned = 0.00197158 Jy ! Component: 1200 - total flux cleaned = 0.00203967 Jy ! Component: 1250 - total flux cleaned = 0.00215113 Jy ! Component: 1300 - total flux cleaned = 0.00226048 Jy ! Component: 1350 - total flux cleaned = 0.00228188 Jy ! Component: 1400 - total flux cleaned = 0.00223954 Jy ! Component: 1450 - total flux cleaned = 0.00240769 Jy ! Component: 1500 - total flux cleaned = 0.00244889 Jy ! Component: 1550 - total flux cleaned = 0.00248951 Jy ! Component: 1600 - total flux cleaned = 0.00257029 Jy ! Component: 1650 - total flux cleaned = 0.00259003 Jy ! Component: 1700 - total flux cleaned = 0.00266903 Jy ! Component: 1750 - total flux cleaned = 0.00274704 Jy ! Component: 1800 - total flux cleaned = 0.0028046 Jy ! Component: 1850 - total flux cleaned = 0.00280433 Jy ! Component: 1900 - total flux cleaned = 0.00282302 Jy ! Component: 1950 - total flux cleaned = 0.00291639 Jy ! Component: 2000 - total flux cleaned = 0.00291624 Jy ! Component: 2050 - total flux cleaned = 0.00295237 Jy ! Component: 2100 - total flux cleaned = 0.00293421 Jy ! Component: 2150 - total flux cleaned = 0.00296988 Jy ! Component: 2200 - total flux cleaned = 0.00296988 Jy ! Component: 2250 - total flux cleaned = 0.0030051 Jy ! Component: 2300 - total flux cleaned = 0.00307385 Jy ! Component: 2350 - total flux cleaned = 0.00317576 Jy ! Component: 2400 - total flux cleaned = 0.00317546 Jy ! Component: 2450 - total flux cleaned = 0.00320887 Jy ! Component: 2500 - total flux cleaned = 0.00319236 Jy ! Component: 2550 - total flux cleaned = 0.00324168 Jy ! Component: 2600 - total flux cleaned = 0.00330674 Jy ! Component: 2650 - total flux cleaned = 0.00333887 Jy ! Component: 2700 - total flux cleaned = 0.0034025 Jy ! Component: 2750 - total flux cleaned = 0.00340272 Jy ! Component: 2800 - total flux cleaned = 0.00343402 Jy ! Component: 2850 - total flux cleaned = 0.00340307 Jy ! Component: 2900 - total flux cleaned = 0.0034494 Jy ! Component: 2950 - total flux cleaned = 0.00344942 Jy ! Component: 3000 - total flux cleaned = 0.00346461 Jy ! Component: 3050 - total flux cleaned = 0.00346479 Jy ! Component: 3100 - total flux cleaned = 0.00345016 Jy ! Component: 3150 - total flux cleaned = 0.00347946 Jy ! Component: 3200 - total flux cleaned = 0.00342114 Jy ! Component: 3250 - total flux cleaned = 0.0034646 Jy ! Component: 3300 - total flux cleaned = 0.00347886 Jy ! Component: 3350 - total flux cleaned = 0.00337945 Jy ! Component: 3400 - total flux cleaned = 0.00339375 Jy ! Component: 3450 - total flux cleaned = 0.00337995 Jy ! Component: 3500 - total flux cleaned = 0.00342163 Jy ! Component: 3550 - total flux cleaned = 0.00342177 Jy ! Component: 3600 - total flux cleaned = 0.00343535 Jy ! Component: 3650 - total flux cleaned = 0.0034355 Jy ! Component: 3700 - total flux cleaned = 0.00344885 Jy ! Component: 3750 - total flux cleaned = 0.00343535 Jy ! Component: 3800 - total flux cleaned = 0.00347506 Jy ! Component: 3850 - total flux cleaned = 0.00348817 Jy ! Component: 3900 - total flux cleaned = 0.00351434 Jy ! Component: 3950 - total flux cleaned = 0.00354026 Jy ! Component: 4000 - total flux cleaned = 0.00348869 Jy ! Component: 4050 - total flux cleaned = 0.00348889 Jy ! Total flux subtracted in 4096 components = 0.00350163 Jy ! Clean residual min=-0.000702 max=0.000945 Jy/beam ! Clean residual mean=-0.000000 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.291598 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 305 components and 0.291598 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2018-1109_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 9.164 at -9.086 degrees (North through East) ! Clean map min=-0.0018678 max=0.28384 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2018-1109_S_map.fits wmodel /image_prod/ug002_uva//J2018-1109_S_map.mod ! Writing 305 model components to file: /image_prod/ug002_uva//J2018-1109_S_map.mod wobs /image_prod/ug002_uva//J2018-1109_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2018-1109_S_uvs.fits wwins /image_prod/ug002_uva//J2018-1109_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J2018-1109_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.283836 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226517 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.239417 0.239417 0.478834 0.957668 1.91534 3.83067 7.66135 15.3227 30.6454 61.2908 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.283 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1253.04 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2018-1109_S_dfm.log closed on Thu Mar 5 04:43:42 2020