! Started logfile: /image_prod/ug002_uva//J2015-1703_S_a_dfm.log on Thu Mar  5 04:41:50 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2015-1703_S_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2015-1703_S_a_uva.fits
! AN table 1: 50 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.982222 visibilities/baseline/integration-bin.
! Found source: J2015-1703
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5304 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2015-1703_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006889Jy  sigma=7.274077
! Fit after  self-cal, rms=0.900926Jy  sigma=6.420381
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.427 mas, bmaj=6.663 mas, bpa=-3.402 degrees
! Estimated noise=2.08824 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0814653 Jy
! Component: 100  -  total flux cleaned = 0.107023 Jy
! Total flux subtracted in 100 components = 0.107023 Jy
! Clean residual min=-0.006553 max=0.010257 Jy/beam
! Clean residual mean=-0.000006 rms=0.001932 Jy/beam
! Combined flux in latest and established models = 0.107023 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.107023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076080Jy  sigma=0.494501
! Fit after  self-cal, rms=0.075926Jy  sigma=0.493591
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.993 mas, bmaj=7.655 mas, bpa=-2.137 degrees
! Estimated noise=1.40008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121472 Jy
! Component: 100  -  total flux cleaned = 0.0175001 Jy
! Component: 150  -  total flux cleaned = 0.0201843 Jy
! Component: 200  -  total flux cleaned = 0.0216322 Jy
! Total flux subtracted in 200 components = 0.0216322 Jy
! Clean residual min=-0.006293 max=0.006015 Jy/beam
! Clean residual mean=-0.000026 rms=0.001528 Jy/beam
! Combined flux in latest and established models = 0.128655 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 35 components and 0.128655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074682Jy  sigma=0.476683
! Fit after  self-cal, rms=0.074701Jy  sigma=0.476561
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.993 x 7.655 at -2.137 degrees (North through East)
! Clean map  min=-0.0062003  max=0.10134 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.34     HN        1.09     KP        0.97     
!   LA        0.95     MK        1.01     NL        0.96     OV        0.77     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.47     FD        0.97     HN        1.11     KP        1.02     
!   LA        1.01     MK        1.04     NL        0.91     OV        0.82     
!   SC        0.85     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.38     FD        0.99     HN        1.17     KP        1.02     
!   LA        0.98     MK        0.97     NL        0.95     OV        0.87     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.074701Jy  sigma=0.476561
! Fit after  self-cal, rms=0.077002Jy  sigma=0.456542
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.972 mas, bmaj=7.595 mas, bpa=-1.173 degrees
! Estimated noise=1.38211 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000373536 Jy
! Component: 100  -  total flux cleaned = -0.000472647 Jy
! Component: 150  -  total flux cleaned = -0.00056373 Jy
! Component: 200  -  total flux cleaned = -0.000646503 Jy
! Total flux subtracted in 200 components = -0.000646503 Jy
! Clean residual min=-0.002784 max=0.003087 Jy/beam
! Clean residual mean=0.000000 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.128009 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 41 components and 0.128009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076979Jy  sigma=0.456323
! Fit after  self-cal, rms=0.077214Jy  sigma=0.455935
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077214Jy  sigma=0.455935
! Fit after  self-cal, rms=0.086131Jy  sigma=0.451751
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.966 mas, bmaj=7.643 mas, bpa=-1.535 degrees
! Estimated noise=1.38835 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.47804e-05 Jy
! Component: 100  -  total flux cleaned = 3.30392e-05 Jy
! Component: 150  -  total flux cleaned = 3.34674e-05 Jy
! Component: 200  -  total flux cleaned = 9.05487e-06 Jy
! Total flux subtracted in 200 components = 9.05487e-06 Jy
! Clean residual min=-0.002535 max=0.002487 Jy/beam
! Clean residual mean=0.000001 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.128018 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 46 components and 0.128018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086113Jy  sigma=0.451592
! Fit after  self-cal, rms=0.086204Jy  sigma=0.451523
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.79329e-05 Jy
! Component: 100  -  total flux cleaned = -9.04099e-05 Jy
! Component: 150  -  total flux cleaned = -0.000129027 Jy
! Component: 200  -  total flux cleaned = -0.000147288 Jy
! Total flux subtracted in 200 components = -0.000147288 Jy
! Clean residual min=-0.002435 max=0.002429 Jy/beam
! Clean residual mean=0.000001 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.12787 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 48 components and 0.12787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086196Jy  sigma=0.451432
! Fit after  self-cal, rms=0.086195Jy  sigma=0.451421
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086195Jy  sigma=0.451421
! Fit after  self-cal, rms=0.087289Jy  sigma=0.451384
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.96 mas, bmaj=7.634 mas, bpa=-1.612 degrees
! Estimated noise=1.3882 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.54338e-06 Jy
! Component: 100  -  total flux cleaned = 2.58362e-05 Jy
! Component: 150  -  total flux cleaned = 2.52265e-05 Jy
! Component: 200  -  total flux cleaned = 2.45843e-05 Jy
! Total flux subtracted in 200 components = 2.45843e-05 Jy
! Clean residual min=-0.002391 max=0.002396 Jy/beam
! Clean residual mean=0.000001 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.127895 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 48 components and 0.127895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087279Jy  sigma=0.451302
! Fit after  self-cal, rms=0.087284Jy  sigma=0.451292
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.28868e-05 Jy
! Component: 100  -  total flux cleaned = -7.57766e-05 Jy
! Component: 150  -  total flux cleaned = -8.92168e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101747 Jy
! Total flux subtracted in 200 components = -0.000101747 Jy
! Clean residual min=-0.002342 max=0.002370 Jy/beam
! Clean residual mean=0.000001 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.127793 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 51 components and 0.127793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087279Jy  sigma=0.451247
! Fit after  self-cal, rms=0.087278Jy  sigma=0.451238
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087278Jy  sigma=0.451238
! Fit after  self-cal, rms=0.087549Jy  sigma=0.451221
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.156 mas, bmaj=15.16 mas, bpa=2.825 degrees
! Estimated noise=1.77399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.16641e-05 Jy
! Component: 100  -  total flux cleaned = 7.26969e-05 Jy
! Component: 150  -  total flux cleaned = 7.25124e-05 Jy
! Component: 200  -  total flux cleaned = 5.95397e-05 Jy
! Total flux subtracted in 200 components = 5.95397e-05 Jy
! Clean residual min=-0.002100 max=0.002462 Jy/beam
! Clean residual mean=0.000001 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.127853 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 57 components and 0.127853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087543Jy  sigma=0.451248
! Fit after  self-cal, rms=0.087540Jy  sigma=0.451240
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.63853e-05 Jy
! Component: 100  -  total flux cleaned = -4.21774e-05 Jy
! Component: 150  -  total flux cleaned = -2.18886e-05 Jy
! Component: 200  -  total flux cleaned = -3.12264e-05 Jy
! Total flux subtracted in 200 components = -3.12264e-05 Jy
! Clean residual min=-0.002081 max=0.002474 Jy/beam
! Clean residual mean=0.000001 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.127822 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 60 components and 0.127822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087541Jy  sigma=0.451299
! Fit after  self-cal, rms=0.087537Jy  sigma=0.451292
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.956 mas, bmaj=7.624 mas, bpa=-1.663 degrees
! Estimated noise=1.38841 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.956 x 7.624 at -1.663 degrees (North through East)
! Clean map  min=-0.0022003  max=0.10241 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.39 mas, bmaj=6.605 mas, bpa=-2.965 degrees
! Estimated noise=2.07406 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0813643 Jy
! Component: 100  -  total flux cleaned = 0.107695 Jy
! Component: 150  -  total flux cleaned = 0.117575 Jy
! Component: 200  -  total flux cleaned = 0.121661 Jy
! Total flux subtracted in 200 components = 0.121661 Jy
! Clean residual min=-0.004257 max=0.003624 Jy/beam
! Clean residual mean=0.000004 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.121661 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.121661 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.956 mas, bmaj=7.624 mas, bpa=-1.663 degrees
! Estimated noise=1.38841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00305602 Jy
! Component: 100  -  total flux cleaned = 0.00443944 Jy
! Component: 150  -  total flux cleaned = 0.00520411 Jy
! Component: 200  -  total flux cleaned = 0.00555271 Jy
! Total flux subtracted in 200 components = 0.00555271 Jy
! Clean residual min=-0.002411 max=0.002319 Jy/beam
! Clean residual mean=0.000001 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.127214 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 0.127214 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.156 mas, bmaj=15.16 mas, bpa=2.825 degrees
! Estimated noise=1.77399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000190118 Jy
! Component: 100  -  total flux cleaned = 0.000187247 Jy
! Component: 150  -  total flux cleaned = 0.000205863 Jy
! Component: 200  -  total flux cleaned = 0.000221203 Jy
! Total flux subtracted in 200 components = 0.000221203 Jy
! Clean residual min=-0.002089 max=0.002467 Jy/beam
! Clean residual mean=0.000001 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.127435 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.38593e-05 Jy
! Component: 100  -  total flux cleaned = 2.66735e-05 Jy
! Component: 150  -  total flux cleaned = 3.80364e-05 Jy
! Component: 200  -  total flux cleaned = 4.86194e-05 Jy
! Total flux subtracted in 200 components = 4.86194e-05 Jy
! Clean residual min=-0.002062 max=0.002482 Jy/beam
! Clean residual mean=0.000001 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.127484 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 43 components and 0.127484 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.956 mas, bmaj=7.624 mas, bpa=-1.663 degrees
! Estimated noise=1.38841 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128513 Jy
! Component: 100  -  total flux cleaned = 2.18961e-05 Jy
! Component: 150  -  total flux cleaned = -2.90919e-05 Jy
! Component: 200  -  total flux cleaned = -2.87538e-05 Jy
! Total flux subtracted in 200 components = -2.87538e-05 Jy
! Clean residual min=-0.002387 max=0.002353 Jy/beam
! Clean residual mean=0.000001 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.127455 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 49 components and 0.127455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087547Jy  sigma=0.451223
! Fit after  self-cal, rms=0.087544Jy  sigma=0.451184
wmodel J2015-1703_S_a_map.mod
! Writing 49 model components to file: J2015-1703_S_a_map.mod
wobs   J2015-1703_S_a_uvs.fits
! Writing UV FITS file: J2015-1703_S_a_uvs.fits
wwins  J2015-1703_S_a_map.win
! wwins: Wrote 1 windows to J2015-1703_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000138289 Jy
! Component: 100  -  total flux cleaned = 0.000298895 Jy
! Component: 150  -  total flux cleaned = 0.000528711 Jy
! Component: 200  -  total flux cleaned = 0.000786576 Jy
! Component: 250  -  total flux cleaned = 0.000823049 Jy
! Component: 300  -  total flux cleaned = 0.000823997 Jy
! Component: 350  -  total flux cleaned = 0.000758022 Jy
! Component: 400  -  total flux cleaned = 0.000727037 Jy
! Component: 450  -  total flux cleaned = 0.000727148 Jy
! Component: 500  -  total flux cleaned = 0.000604767 Jy
! Component: 550  -  total flux cleaned = 0.000664323 Jy
! Component: 600  -  total flux cleaned = 0.000634917 Jy
! Component: 650  -  total flux cleaned = 0.000576853 Jy
! Component: 700  -  total flux cleaned = 0.000604333 Jy
! Component: 750  -  total flux cleaned = 0.000631854 Jy
! Component: 800  -  total flux cleaned = 0.000740258 Jy
! Component: 850  -  total flux cleaned = 0.00084611 Jy
! Component: 900  -  total flux cleaned = 0.000950385 Jy
! Component: 950  -  total flux cleaned = 0.00102763 Jy
! Component: 1000  -  total flux cleaned = 0.00112826 Jy
! Component: 1050  -  total flux cleaned = 0.00117741 Jy
! Component: 1100  -  total flux cleaned = 0.00125014 Jy
! Component: 1150  -  total flux cleaned = 0.00134621 Jy
! Component: 1200  -  total flux cleaned = 0.00148745 Jy
! Component: 1250  -  total flux cleaned = 0.00155681 Jy
! Component: 1300  -  total flux cleaned = 0.00162574 Jy
! Component: 1350  -  total flux cleaned = 0.00178439 Jy
! Component: 1400  -  total flux cleaned = 0.00191791 Jy
! Component: 1450  -  total flux cleaned = 0.00207126 Jy
! Component: 1500  -  total flux cleaned = 0.00217936 Jy
! Component: 1550  -  total flux cleaned = 0.00228628 Jy
! Component: 1600  -  total flux cleaned = 0.00237066 Jy
! Component: 1650  -  total flux cleaned = 0.00245436 Jy
! Component: 1700  -  total flux cleaned = 0.00259865 Jy
! Component: 1750  -  total flux cleaned = 0.00270023 Jy
! Component: 1800  -  total flux cleaned = 0.00276056 Jy
! Component: 1850  -  total flux cleaned = 0.00284013 Jy
! Component: 1900  -  total flux cleaned = 0.00289884 Jy
! Component: 1950  -  total flux cleaned = 0.00295668 Jy
! Component: 2000  -  total flux cleaned = 0.00297573 Jy
! Component: 2050  -  total flux cleaned = 0.00297604 Jy
! Component: 2100  -  total flux cleaned = 0.00312709 Jy
! Component: 2150  -  total flux cleaned = 0.00316495 Jy
! Component: 2200  -  total flux cleaned = 0.00327623 Jy
! Component: 2250  -  total flux cleaned = 0.0033862 Jy
! Component: 2300  -  total flux cleaned = 0.0034407 Jy
! Component: 2350  -  total flux cleaned = 0.00347624 Jy
! Component: 2400  -  total flux cleaned = 0.00347638 Jy
! Component: 2450  -  total flux cleaned = 0.00356493 Jy
! Component: 2500  -  total flux cleaned = 0.00365275 Jy
! Component: 2550  -  total flux cleaned = 0.00370481 Jy
! Component: 2600  -  total flux cleaned = 0.00373896 Jy
! Component: 2650  -  total flux cleaned = 0.00379022 Jy
! Component: 2700  -  total flux cleaned = 0.0038748 Jy
! Component: 2750  -  total flux cleaned = 0.00389159 Jy
! Component: 2800  -  total flux cleaned = 0.00397483 Jy
! Component: 2850  -  total flux cleaned = 0.00399127 Jy
! Component: 2900  -  total flux cleaned = 0.00404042 Jy
! Component: 2950  -  total flux cleaned = 0.00410527 Jy
! Component: 3000  -  total flux cleaned = 0.00408919 Jy
! Component: 3050  -  total flux cleaned = 0.00416903 Jy
! Component: 3100  -  total flux cleaned = 0.00416899 Jy
! Component: 3150  -  total flux cleaned = 0.00415334 Jy
! Component: 3200  -  total flux cleaned = 0.0042469 Jy
! Component: 3250  -  total flux cleaned = 0.00426226 Jy
! Component: 3300  -  total flux cleaned = 0.00423151 Jy
! Component: 3350  -  total flux cleaned = 0.00424673 Jy
! Component: 3400  -  total flux cleaned = 0.00429226 Jy
! Component: 3450  -  total flux cleaned = 0.0043224 Jy
! Component: 3500  -  total flux cleaned = 0.00436722 Jy
! Component: 3550  -  total flux cleaned = 0.0043821 Jy
! Component: 3600  -  total flux cleaned = 0.00439691 Jy
! Component: 3650  -  total flux cleaned = 0.00439685 Jy
! Component: 3700  -  total flux cleaned = 0.00444077 Jy
! Component: 3750  -  total flux cleaned = 0.00442632 Jy
! Component: 3800  -  total flux cleaned = 0.00442636 Jy
! Component: 3850  -  total flux cleaned = 0.00442629 Jy
! Component: 3900  -  total flux cleaned = 0.00444056 Jy
! Component: 3950  -  total flux cleaned = 0.00444065 Jy
! Component: 4000  -  total flux cleaned = 0.00451106 Jy
! Component: 4050  -  total flux cleaned = 0.00453905 Jy
! Total flux subtracted in 4096 components = 0.00453902 Jy
! Clean residual min=-0.000763 max=0.000844 Jy/beam
! Clean residual mean=0.000000 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.131994 Jy
keep
! Adding 252 model components to the UV plane model.
! The established model now contains 301 components and 0.131994 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2015-1703_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.956 x 7.624 at -1.663 degrees (North through East)
! Clean map  min=-0.0016761  max=0.10278 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2015-1703_S_a_map.fits
wmodel /image_prod/ug002_uva//J2015-1703_S_a_map.mod
! Writing 301 model components to file: /image_prod/ug002_uva//J2015-1703_S_a_map.mod
wobs   /image_prod/ug002_uva//J2015-1703_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2015-1703_S_a_uvs.fits
wwins  /image_prod/ug002_uva//J2015-1703_S_a_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J2015-1703_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.10278 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000235914 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.688597 0.688597 1.37719 2.75439 5.50878 11.0176 22.0351 44.0702 88.1404
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.102 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  435.668 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2015-1703_S_a_dfm.log closed on Thu Mar  5 04:41:54 2020