! Started logfile: /image_prod/ug002_uva//J2015+6554_X_dfm.log on Thu Mar 5 04:41:34 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2015+6554_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2015+6554_X_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.857407 visibilities/baseline/integration-bin. ! Found source: J2015+6554 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 22224 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2015+6554_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.075295Jy sigma=8.629652 ! Fit after self-cal, rms=0.665412Jy sigma=5.356911 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7196 mas, bmaj=0.8561 mas, bpa=-27.36 degrees ! Estimated noise=1.17577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.237164 Jy ! Component: 100 - total flux cleaned = 0.316311 Jy ! Total flux subtracted in 100 components = 0.316311 Jy ! Clean residual min=-0.017936 max=0.046321 Jy/beam ! Clean residual mean=-0.000006 rms=0.004010 Jy/beam ! Combined flux in latest and established models = 0.316311 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.316311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.142541Jy sigma=1.128266 ! Fit after self-cal, rms=0.141456Jy sigma=1.121319 ! Inverting map ! Added new window around map position (-0.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539597 Jy ! Component: 100 - total flux cleaned = 0.0878344 Jy ! Total flux subtracted in 100 components = 0.0878344 Jy ! Clean residual min=-0.013626 max=0.020629 Jy/beam ! Clean residual mean=-0.000002 rms=0.002688 Jy/beam ! Combined flux in latest and established models = 0.404146 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.404146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102781Jy sigma=0.807125 ! Fit after self-cal, rms=0.101209Jy sigma=0.796221 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269093 Jy ! Component: 100 - total flux cleaned = 0.0454298 Jy ! Total flux subtracted in 100 components = 0.0454298 Jy ! Clean residual min=-0.010534 max=0.013073 Jy/beam ! Clean residual mean=-0.000001 rms=0.002128 Jy/beam ! Combined flux in latest and established models = 0.449575 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.449575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087350Jy sigma=0.682017 ! Fit after self-cal, rms=0.086707Jy sigma=0.677382 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153203 Jy ! Component: 100 - total flux cleaned = 0.025918 Jy ! Total flux subtracted in 100 components = 0.025918 Jy ! Clean residual min=-0.009050 max=0.010447 Jy/beam ! Clean residual mean=0.000000 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 0.475493 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.475493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081275Jy sigma=0.631768 ! Fit after self-cal, rms=0.081040Jy sigma=0.630063 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9163 mas, bmaj=1.081 mas, bpa=-24.19 degrees ! Estimated noise=0.601305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174661 Jy ! Component: 100 - total flux cleaned = 0.0285446 Jy ! Component: 150 - total flux cleaned = 0.0360529 Jy ! Component: 200 - total flux cleaned = 0.0412911 Jy ! Total flux subtracted in 200 components = 0.0412911 Jy ! Clean residual min=-0.009905 max=0.012496 Jy/beam ! Clean residual mean=0.000002 rms=0.002396 Jy/beam ! Combined flux in latest and established models = 0.516784 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.516784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076831Jy sigma=0.593257 ! Fit after self-cal, rms=0.076577Jy sigma=0.591134 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9163 x 1.081 at -24.19 degrees (North through East) ! Clean map min=-0.0095838 max=0.32171 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.99 KP 1.04 ! LA 0.91 MK 1.02 NL 1.18 OV 0.90 ! SC 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.01 KP 1.04 ! LA 0.91 MK 1.02 NL 1.18 OV 0.90 ! SC 1.05 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.98 KP 1.05 ! LA 0.92 MK 1.02 NL 1.18 OV 0.89 ! SC 1.06 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.99 KP 1.05 ! LA 0.92 MK 1.01 NL 1.18 OV 0.90 ! SC 1.05 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 1.05 ! LA 0.92 MK 1.00 NL 1.19 OV 0.89 ! SC 1.05 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.99 KP 1.05 ! LA 0.92 MK 1.00 NL 1.18 OV 0.88 ! SC 1.04 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.98 KP 1.05 ! LA 0.92 MK 1.01 NL 1.18 OV 0.90 ! SC 1.06 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.98 KP 1.04 ! LA 0.92 MK 1.00 NL 1.20 OV 0.90 ! SC 1.05 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.99 KP 1.05 ! LA 0.92 MK 1.01 NL 1.19 OV 0.90 ! SC 1.05 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 1.06 ! LA 0.91 MK 1.02 NL 1.18 OV 0.90 ! SC 1.04 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.99 KP 1.05 ! LA 0.93 MK 1.01 NL 1.19 OV 0.90 ! SC 1.04 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.98 KP 1.05 ! LA 0.92 MK 1.00 NL 1.19 OV 0.90 ! SC 1.06 ! ! ! Fit before self-cal, rms=0.076577Jy sigma=0.591134 ! Fit after self-cal, rms=0.065046Jy sigma=0.488079 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9271 mas, bmaj=1.092 mas, bpa=-23.92 degrees ! Estimated noise=0.599112 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.8, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267527 Jy ! Component: 100 - total flux cleaned = 0.00223086 Jy ! Component: 150 - total flux cleaned = 0.00160844 Jy ! Component: 200 - total flux cleaned = 0.00128944 Jy ! Total flux subtracted in 200 components = 0.00128944 Jy ! Clean residual min=-0.004952 max=0.005389 Jy/beam ! Clean residual mean=0.000002 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.518074 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.518074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064282Jy sigma=0.483121 ! Fit after self-cal, rms=0.064293Jy sigma=0.482510 ! Inverting map ! Added new window around map position (8.4, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208356 Jy ! Component: 100 - total flux cleaned = 0.00235082 Jy ! Component: 150 - total flux cleaned = 0.00257954 Jy ! Component: 200 - total flux cleaned = 0.00277681 Jy ! Total flux subtracted in 200 components = 0.00277681 Jy ! Clean residual min=-0.004174 max=0.004835 Jy/beam ! Clean residual mean=0.000002 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.520851 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 72 components and 0.520851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063685Jy sigma=0.478736 ! Fit after self-cal, rms=0.063658Jy sigma=0.478503 ! Inverting map ! Added new window around map position (3.6, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146708 Jy ! Component: 100 - total flux cleaned = 0.000995588 Jy ! Component: 150 - total flux cleaned = 0.000991386 Jy ! Component: 200 - total flux cleaned = 0.00127538 Jy ! Total flux subtracted in 200 components = 0.00127538 Jy ! Clean residual min=-0.003959 max=0.004480 Jy/beam ! Clean residual mean=0.000002 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.522126 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 86 components and 0.522126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063133Jy sigma=0.475229 ! Fit after self-cal, rms=0.063119Jy sigma=0.475052 ! Inverting map ! Added new window around map position (8.2, 12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324937 Jy ! Component: 100 - total flux cleaned = 0.00277841 Jy ! Component: 150 - total flux cleaned = 0.00236874 Jy ! Component: 200 - total flux cleaned = 0.00264647 Jy ! Total flux subtracted in 200 components = 0.00264647 Jy ! Clean residual min=-0.004076 max=0.004017 Jy/beam ! Clean residual mean=0.000002 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.524773 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 0.524773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062588Jy sigma=0.471831 ! Fit after self-cal, rms=0.062557Jy sigma=0.471527 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062557Jy sigma=0.471527 ! Fit after self-cal, rms=0.060669Jy sigma=0.452348 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9242 mas, bmaj=1.091 mas, bpa=-22.16 degrees ! Estimated noise=0.599121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00081632 Jy ! Component: 100 - total flux cleaned = 0.000536746 Jy ! Component: 150 - total flux cleaned = -5.10524e-06 Jy ! Component: 200 - total flux cleaned = -0.000271804 Jy ! Total flux subtracted in 200 components = -0.000271804 Jy ! Clean residual min=-0.002349 max=0.002507 Jy/beam ! Clean residual mean=0.000000 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.524501 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 114 components and 0.524501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060519Jy sigma=0.450974 ! Fit after self-cal, rms=0.060531Jy sigma=0.450863 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245008 Jy ! Component: 100 - total flux cleaned = 0.00257715 Jy ! Component: 150 - total flux cleaned = 0.00262774 Jy ! Component: 200 - total flux cleaned = 0.00258368 Jy ! Total flux subtracted in 200 components = 0.00258368 Jy ! Clean residual min=-0.002161 max=0.002228 Jy/beam ! Clean residual mean=0.000000 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.527084 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 133 components and 0.527084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060399Jy sigma=0.449801 ! Fit after self-cal, rms=0.060385Jy sigma=0.449731 ! Inverting map ! Added new window around map position (-3, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187988 Jy ! Component: 100 - total flux cleaned = 0.00241481 Jy ! Component: 150 - total flux cleaned = 0.00268784 Jy ! Component: 200 - total flux cleaned = 0.00276799 Jy ! Total flux subtracted in 200 components = 0.00276799 Jy ! Clean residual min=-0.002016 max=0.001933 Jy/beam ! Clean residual mean=0.000000 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.529852 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 144 components and 0.529852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060284Jy sigma=0.448956 ! Fit after self-cal, rms=0.060277Jy sigma=0.448906 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060277Jy sigma=0.448906 ! Fit after self-cal, rms=0.060436Jy sigma=0.448213 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9221 mas, bmaj=1.09 mas, bpa=-21.56 degrees ! Estimated noise=0.598396 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000692618 Jy ! Component: 100 - total flux cleaned = 0.000546424 Jy ! Component: 150 - total flux cleaned = 0.000503417 Jy ! Component: 200 - total flux cleaned = 0.000629084 Jy ! Total flux subtracted in 200 components = 0.000629084 Jy ! Clean residual min=-0.001786 max=0.001586 Jy/beam ! Clean residual mean=0.000000 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.530481 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 154 components and 0.530481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060362Jy sigma=0.447594 ! Fit after self-cal, rms=0.060358Jy sigma=0.447562 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011701 Jy ! Component: 100 - total flux cleaned = 0.000117985 Jy ! Component: 150 - total flux cleaned = 0.00022555 Jy ! Component: 200 - total flux cleaned = 0.00029406 Jy ! Total flux subtracted in 200 components = 0.00029406 Jy ! Clean residual min=-0.001734 max=0.001477 Jy/beam ! Clean residual mean=0.000000 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.530776 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 159 components and 0.530775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060316Jy sigma=0.447228 ! Fit after self-cal, rms=0.060312Jy sigma=0.447215 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060312Jy sigma=0.447215 ! Fit after self-cal, rms=0.060400Jy sigma=0.447138 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.126 mas, bmaj=2.22 mas, bpa=-75.55 degrees ! Estimated noise=0.837829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000575984 Jy ! Component: 100 - total flux cleaned = 0.000714198 Jy ! Component: 150 - total flux cleaned = 0.000776372 Jy ! Component: 200 - total flux cleaned = 0.000887301 Jy ! Total flux subtracted in 200 components = 0.000887301 Jy ! Clean residual min=-0.001961 max=0.001768 Jy/beam ! Clean residual mean=0.000000 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.531663 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 183 components and 0.531663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060385Jy sigma=0.447077 ! Fit after self-cal, rms=0.060383Jy sigma=0.447061 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.4668e-05 Jy ! Component: 100 - total flux cleaned = 9.47989e-05 Jy ! Component: 150 - total flux cleaned = 0.00011851 Jy ! Component: 200 - total flux cleaned = 0.000185564 Jy ! Total flux subtracted in 200 components = 0.000185564 Jy ! Clean residual min=-0.001909 max=0.001751 Jy/beam ! Clean residual mean=0.000001 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.531848 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 191 components and 0.531848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060377Jy sigma=0.447034 ! Fit after self-cal, rms=0.060374Jy sigma=0.447025 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9213 mas, bmaj=1.09 mas, bpa=-21.29 degrees ! Estimated noise=0.598382 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9213 x 1.09 at -21.29 degrees (North through East) ! Clean map min=-0.0028323 max=0.31747 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7233 mas, bmaj=0.8593 mas, bpa=-23.99 degrees ! Estimated noise=1.1813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.239449 Jy ! Component: 100 - total flux cleaned = 0.329425 Jy ! Component: 150 - total flux cleaned = 0.380734 Jy ! Component: 200 - total flux cleaned = 0.415089 Jy ! Total flux subtracted in 200 components = 0.415089 Jy ! Clean residual min=-0.006841 max=0.019070 Jy/beam ! Clean residual mean=-0.000003 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 0.415089 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.415089 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9213 mas, bmaj=1.09 mas, bpa=-21.29 degrees ! Estimated noise=0.598382 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0384957 Jy ! Component: 100 - total flux cleaned = 0.0607505 Jy ! Component: 150 - total flux cleaned = 0.0748844 Jy ! Component: 200 - total flux cleaned = 0.084359 Jy ! Total flux subtracted in 200 components = 0.084359 Jy ! Clean residual min=-0.002944 max=0.005766 Jy/beam ! Clean residual mean=-0.000001 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.499448 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 48 components and 0.499448 Jy ! Inverting map ! Added new window around map position (-1, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669159 Jy ! Component: 100 - total flux cleaned = 0.011368 Jy ! Component: 150 - total flux cleaned = 0.0149313 Jy ! Component: 200 - total flux cleaned = 0.0172172 Jy ! Total flux subtracted in 200 components = 0.0172172 Jy ! Clean residual min=-0.002076 max=0.002669 Jy/beam ! Clean residual mean=0.000000 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.516665 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 72 components and 0.516665 Jy ! Inverting map ! Added new window around map position (-6.6, 12.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242519 Jy ! Component: 100 - total flux cleaned = 0.00406052 Jy ! Component: 150 - total flux cleaned = 0.005446 Jy ! Component: 200 - total flux cleaned = 0.00677832 Jy ! Total flux subtracted in 200 components = 0.00677832 Jy ! Clean residual min=-0.001835 max=0.001861 Jy/beam ! Clean residual mean=0.000000 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.523443 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 94 components and 0.523444 Jy ! Inverting map ! Added new window around map position (41, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137603 Jy ! Component: 100 - total flux cleaned = 0.00212641 Jy ! Component: 150 - total flux cleaned = 0.00270316 Jy ! Component: 200 - total flux cleaned = 0.00330919 Jy ! Total flux subtracted in 200 components = 0.00330919 Jy ! Clean residual min=-0.001688 max=0.001644 Jy/beam ! Clean residual mean=0.000000 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.526753 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 111 components and 0.526753 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.126 mas, bmaj=2.22 mas, bpa=-75.55 degrees ! Estimated noise=0.837829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019868 Jy ! Component: 100 - total flux cleaned = 0.00357292 Jy ! Component: 150 - total flux cleaned = 0.0046858 Jy ! Component: 200 - total flux cleaned = 0.0054125 Jy ! Total flux subtracted in 200 components = 0.0054125 Jy ! Clean residual min=-0.001576 max=0.001866 Jy/beam ! Clean residual mean=0.000001 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.532165 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000324849 Jy ! Component: 100 - total flux cleaned = 0.000621312 Jy ! Component: 150 - total flux cleaned = 0.000891913 Jy ! Component: 200 - total flux cleaned = 0.00110942 Jy ! Total flux subtracted in 200 components = 0.00110942 Jy ! Clean residual min=-0.001527 max=0.001801 Jy/beam ! Clean residual mean=0.000001 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.533275 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 158 components and 0.533275 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9213 mas, bmaj=1.09 mas, bpa=-21.29 degrees ! Estimated noise=0.598382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000661867 Jy ! Component: 100 - total flux cleaned = -0.000515331 Jy ! Component: 150 - total flux cleaned = -0.000425276 Jy ! Component: 200 - total flux cleaned = -0.000296776 Jy ! Total flux subtracted in 200 components = -0.000296776 Jy ! Clean residual min=-0.001419 max=0.001416 Jy/beam ! Clean residual mean=0.000000 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.532978 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 171 components and 0.532978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060414Jy sigma=0.447027 ! Fit after self-cal, rms=0.060362Jy sigma=0.446705 wmodel J2015+6554_X_map.mod ! Writing 171 model components to file: J2015+6554_X_map.mod wobs J2015+6554_X_uvs.fits ! Writing UV FITS file: J2015+6554_X_uvs.fits wwins J2015+6554_X_map.win ! wwins: Wrote 11 windows to J2015+6554_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000477159 Jy ! Component: 100 - total flux cleaned = -0.000477303 Jy ! Component: 150 - total flux cleaned = -0.00043002 Jy ! Component: 200 - total flux cleaned = -0.000361401 Jy ! Component: 250 - total flux cleaned = -0.000294844 Jy ! Component: 300 - total flux cleaned = -0.000185884 Jy ! Component: 350 - total flux cleaned = -9.96689e-05 Jy ! Component: 400 - total flux cleaned = 2.73802e-05 Jy ! Component: 450 - total flux cleaned = 0.000193544 Jy ! Component: 500 - total flux cleaned = 0.000336561 Jy ! Component: 550 - total flux cleaned = 0.000496942 Jy ! Component: 600 - total flux cleaned = 0.000654637 Jy ! Component: 650 - total flux cleaned = 0.000771328 Jy ! Component: 700 - total flux cleaned = 0.000905473 Jy ! Component: 750 - total flux cleaned = 0.00105698 Jy ! Component: 800 - total flux cleaned = 0.00122484 Jy ! Component: 850 - total flux cleaned = 0.00137194 Jy ! Component: 900 - total flux cleaned = 0.00149865 Jy ! Component: 950 - total flux cleaned = 0.00158869 Jy ! Component: 1000 - total flux cleaned = 0.00173035 Jy ! Component: 1050 - total flux cleaned = 0.00178281 Jy ! Component: 1100 - total flux cleaned = 0.00193843 Jy ! Component: 1150 - total flux cleaned = 0.00197268 Jy ! Component: 1200 - total flux cleaned = 0.00205737 Jy ! Component: 1250 - total flux cleaned = 0.0021073 Jy ! Component: 1300 - total flux cleaned = 0.00215695 Jy ! Component: 1350 - total flux cleaned = 0.00218946 Jy ! Component: 1400 - total flux cleaned = 0.00223816 Jy ! Component: 1450 - total flux cleaned = 0.00222226 Jy ! Component: 1500 - total flux cleaned = 0.00228596 Jy ! Component: 1550 - total flux cleaned = 0.00236476 Jy ! Component: 1600 - total flux cleaned = 0.00239566 Jy ! Component: 1650 - total flux cleaned = 0.0024266 Jy ! Component: 1700 - total flux cleaned = 0.00247234 Jy ! Component: 1750 - total flux cleaned = 0.00253284 Jy ! Component: 1800 - total flux cleaned = 0.00250285 Jy ! Component: 1850 - total flux cleaned = 0.00259178 Jy ! Component: 1900 - total flux cleaned = 0.0025327 Jy ! Component: 1950 - total flux cleaned = 0.00257684 Jy ! Component: 2000 - total flux cleaned = 0.00259117 Jy ! Component: 2050 - total flux cleaned = 0.00257681 Jy ! Component: 2100 - total flux cleaned = 0.00254832 Jy ! Component: 2150 - total flux cleaned = 0.00267561 Jy ! Component: 2200 - total flux cleaned = 0.00259127 Jy ! Component: 2250 - total flux cleaned = 0.00263309 Jy ! Component: 2300 - total flux cleaned = 0.00260544 Jy ! Component: 2350 - total flux cleaned = 0.00259165 Jy ! Component: 2400 - total flux cleaned = 0.00257814 Jy ! Component: 2450 - total flux cleaned = 0.00267291 Jy ! Component: 2500 - total flux cleaned = 0.00269984 Jy ! Component: 2550 - total flux cleaned = 0.00265969 Jy ! Component: 2600 - total flux cleaned = 0.00279204 Jy ! Component: 2650 - total flux cleaned = 0.00283152 Jy ! Component: 2700 - total flux cleaned = 0.00279237 Jy ! Component: 2750 - total flux cleaned = 0.00292221 Jy ! Component: 2800 - total flux cleaned = 0.0029738 Jy ! Component: 2850 - total flux cleaned = 0.00298657 Jy ! Component: 2900 - total flux cleaned = 0.00301208 Jy ! Component: 2950 - total flux cleaned = 0.0030753 Jy ! Component: 3000 - total flux cleaned = 0.0031005 Jy ! Component: 3050 - total flux cleaned = 0.00310065 Jy ! Component: 3100 - total flux cleaned = 0.00315037 Jy ! Component: 3150 - total flux cleaned = 0.00317497 Jy ! Component: 3200 - total flux cleaned = 0.00317503 Jy ! Component: 3250 - total flux cleaned = 0.00319968 Jy ! Component: 3300 - total flux cleaned = 0.00327249 Jy ! Component: 3350 - total flux cleaned = 0.00332069 Jy ! Component: 3400 - total flux cleaned = 0.00338069 Jy ! Component: 3450 - total flux cleaned = 0.0033329 Jy ! Component: 3500 - total flux cleaned = 0.00342781 Jy ! Component: 3550 - total flux cleaned = 0.00342794 Jy ! Component: 3600 - total flux cleaned = 0.0034632 Jy ! Component: 3650 - total flux cleaned = 0.00347488 Jy ! Component: 3700 - total flux cleaned = 0.00353284 Jy ! Component: 3750 - total flux cleaned = 0.0035329 Jy ! Component: 3800 - total flux cleaned = 0.00363612 Jy ! Component: 3850 - total flux cleaned = 0.00360193 Jy ! Component: 3900 - total flux cleaned = 0.00365856 Jy ! Component: 3950 - total flux cleaned = 0.00369235 Jy ! Component: 4000 - total flux cleaned = 0.00371473 Jy ! Component: 4050 - total flux cleaned = 0.00378157 Jy ! Total flux subtracted in 4096 components = 0.00378155 Jy ! Clean residual min=-0.000665 max=0.000694 Jy/beam ! Clean residual mean=0.000000 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.53676 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 479 components and 0.53676 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2015+6554_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9213 x 1.09 at -21.29 degrees (North through East) ! Clean map min=-0.0018683 max=0.31743 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2015+6554_X_map.fits wmodel /image_prod/ug002_uva//J2015+6554_X_map.mod ! Writing 479 model components to file: /image_prod/ug002_uva//J2015+6554_X_map.mod wobs /image_prod/ug002_uva//J2015+6554_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2015+6554_X_uvs.fits wwins /image_prod/ug002_uva//J2015+6554_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J2015+6554_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.317426 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184436 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.174311 0.174311 0.348623 0.697245 1.39449 2.78898 5.57796 11.1559 22.3118 44.6237 89.2474 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.317 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1721.06 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2015+6554_X_dfm.log closed on Thu Mar 5 04:41:39 2020