! Started logfile: /image_prod/ug002_uva//J2011-1546_X_d_dfm.log on Thu Mar 5 04:39:07 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2011-1546_X_d_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2011-1546_X_d_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.907407 visibilities/baseline/integration-bin. ! Found source: J2011-1546 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 11760 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2011-1546_X_d] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.059388Jy sigma=7.693747 ! Fit after self-cal, rms=0.852865Jy sigma=3.123330 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6155 mas, bmaj=1.531 mas, bpa=0.3239 degrees ! Estimated noise=2.67609 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.33457 Jy ! Component: 100 - total flux cleaned = 1.67609 Jy ! Total flux subtracted in 100 components = 1.67609 Jy ! Clean residual min=-0.055388 max=0.137251 Jy/beam ! Clean residual mean=-0.000007 rms=0.011101 Jy/beam ! Combined flux in latest and established models = 1.67609 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.67609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.300220Jy sigma=1.091948 ! Fit after self-cal, rms=0.300144Jy sigma=1.091736 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140611 Jy ! Component: 100 - total flux cleaned = 0.201816 Jy ! Total flux subtracted in 100 components = 0.201816 Jy ! Clean residual min=-0.037963 max=0.070203 Jy/beam ! Clean residual mean=-0.000001 rms=0.007812 Jy/beam ! Combined flux in latest and established models = 1.87791 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 7 components and 1.87791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.215344Jy sigma=0.797963 ! Fit after self-cal, rms=0.215253Jy sigma=0.797742 ! Inverting map ! Added new window around map position (1.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.052876 Jy ! Component: 100 - total flux cleaned = 0.0647304 Jy ! Total flux subtracted in 100 components = 0.0647304 Jy ! Clean residual min=-0.038743 max=0.060365 Jy/beam ! Clean residual mean=-0.000000 rms=0.006987 Jy/beam ! Combined flux in latest and established models = 1.94264 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 1.94264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.197372Jy sigma=0.729771 ! Fit after self-cal, rms=0.195917Jy sigma=0.723819 ! Inverting map ! Added new window around map position (-2.4, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0464253 Jy ! Component: 100 - total flux cleaned = 0.0671469 Jy ! Total flux subtracted in 100 components = 0.0671469 Jy ! Clean residual min=-0.037715 max=0.039244 Jy/beam ! Clean residual mean=0.000000 rms=0.006337 Jy/beam ! Combined flux in latest and established models = 2.00978 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 2.00978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.181822Jy sigma=0.672479 ! Fit after self-cal, rms=0.180782Jy sigma=0.668755 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.777 mas, bmaj=1.87 mas, bpa=0.4374 degrees ! Estimated noise=1.7891 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.2, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425713 Jy ! Component: 100 - total flux cleaned = 0.0674603 Jy ! Component: 150 - total flux cleaned = 0.078863 Jy ! Component: 200 - total flux cleaned = 0.0870633 Jy ! Total flux subtracted in 200 components = 0.0870633 Jy ! Clean residual min=-0.033046 max=0.032483 Jy/beam ! Clean residual mean=0.000015 rms=0.006555 Jy/beam ! Combined flux in latest and established models = 2.09685 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 42 components and 2.09685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168650Jy sigma=0.623637 ! Fit after self-cal, rms=0.168181Jy sigma=0.621605 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.777 x 1.87 at 0.4374 degrees (North through East) ! Clean map min=-0.030813 max=1.7344 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.02 KP 1.06 ! LA 0.98 MK 1.01 NL 1.08 OV 1.00 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.04 KP 1.06 ! LA 0.98 MK 1.01 NL 1.06 OV 0.99 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.05 KP 1.06 ! LA 0.99 MK 0.96 NL 1.08 OV 1.00 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.99 KP 1.06 ! LA 0.99 MK 1.00 NL 1.07 OV 1.00 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.03 KP 1.06 ! LA 0.99 MK 1.01 NL 1.07 OV 1.00 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.04 KP 1.07 ! LA 1.00 MK 1.01 NL 1.06 OV 0.98 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.05 KP 1.06 ! LA 0.99 MK 1.02 NL 1.06 OV 0.99 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.04 KP 1.05 ! LA 1.00 MK 1.01 NL 1.07 OV 0.99 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.06 KP 1.07 ! LA 0.98 MK 1.00 NL 1.07 OV 0.99 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.06 KP 1.05 ! LA 1.00 MK 1.01 NL 1.08 OV 1.00 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.05 KP 1.08 ! LA 1.01 MK 1.03 NL 1.07 OV 1.00 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.07 KP 1.05 ! LA 0.98 MK 1.04 NL 1.07 OV 1.03 ! PT 0.90 SC 1.02 ! ! ! Fit before self-cal, rms=0.168181Jy sigma=0.621605 ! Fit after self-cal, rms=0.125335Jy sigma=0.461174 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7797 mas, bmaj=1.87 mas, bpa=0.7709 degrees ! Estimated noise=1.79792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0237723 Jy ! Component: 100 - total flux cleaned = -0.0323685 Jy ! Component: 150 - total flux cleaned = -0.038177 Jy ! Component: 200 - total flux cleaned = -0.0429266 Jy ! Total flux subtracted in 200 components = -0.0429266 Jy ! Clean residual min=-0.020353 max=0.017529 Jy/beam ! Clean residual mean=-0.000014 rms=0.004132 Jy/beam ! Combined flux in latest and established models = 2.05392 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 2.05392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119152Jy sigma=0.438038 ! Fit after self-cal, rms=0.118701Jy sigma=0.436813 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.118701Jy sigma=0.436813 ! Fit after self-cal, rms=0.106073Jy sigma=0.379850 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7783 mas, bmaj=1.874 mas, bpa=0.6475 degrees ! Estimated noise=1.79971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0186408 Jy ! Component: 100 - total flux cleaned = -0.0234089 Jy ! Component: 150 - total flux cleaned = -0.0259929 Jy ! Component: 200 - total flux cleaned = -0.0283476 Jy ! Total flux subtracted in 200 components = -0.0283476 Jy ! Clean residual min=-0.014852 max=0.014944 Jy/beam ! Clean residual mean=-0.000024 rms=0.003100 Jy/beam ! Combined flux in latest and established models = 2.02557 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 2.02557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102162Jy sigma=0.365464 ! Fit after self-cal, rms=0.101829Jy sigma=0.364402 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00887017 Jy ! Component: 100 - total flux cleaned = 0.00745966 Jy ! Component: 150 - total flux cleaned = 0.00485579 Jy ! Component: 200 - total flux cleaned = 0.00287451 Jy ! Total flux subtracted in 200 components = 0.00287451 Jy ! Clean residual min=-0.013295 max=0.013455 Jy/beam ! Clean residual mean=-0.000025 rms=0.002970 Jy/beam ! Combined flux in latest and established models = 2.02845 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 2.02845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099543Jy sigma=0.355081 ! Fit after self-cal, rms=0.099417Jy sigma=0.354500 ! Inverting map ! Added new window around map position (6.8, -11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00676778 Jy ! Component: 100 - total flux cleaned = 0.00809708 Jy ! Component: 150 - total flux cleaned = 0.00755189 Jy ! Component: 200 - total flux cleaned = 0.00653857 Jy ! Total flux subtracted in 200 components = 0.00653857 Jy ! Clean residual min=-0.012723 max=0.011762 Jy/beam ! Clean residual mean=-0.000025 rms=0.002832 Jy/beam ! Combined flux in latest and established models = 2.03499 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 2.03499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096936Jy sigma=0.345922 ! Fit after self-cal, rms=0.096841Jy sigma=0.345656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096841Jy sigma=0.345656 ! Fit after self-cal, rms=0.078421Jy sigma=0.284127 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7778 mas, bmaj=1.875 mas, bpa=0.6437 degrees ! Estimated noise=1.7996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0127309 Jy ! Component: 100 - total flux cleaned = -0.0208171 Jy ! Component: 150 - total flux cleaned = -0.0240583 Jy ! Component: 200 - total flux cleaned = -0.0259569 Jy ! Total flux subtracted in 200 components = -0.0259569 Jy ! Clean residual min=-0.007543 max=0.007333 Jy/beam ! Clean residual mean=-0.000012 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 2.00903 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 123 components and 2.00903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075764Jy sigma=0.274578 ! Fit after self-cal, rms=0.075643Jy sigma=0.274233 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0023409 Jy ! Component: 100 - total flux cleaned = -0.00322122 Jy ! Component: 150 - total flux cleaned = -0.00432766 Jy ! Component: 200 - total flux cleaned = -0.00474973 Jy ! Total flux subtracted in 200 components = -0.00474973 Jy ! Clean residual min=-0.006892 max=0.007041 Jy/beam ! Clean residual mean=-0.000011 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 2.00428 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 135 components and 2.00428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074974Jy sigma=0.271825 ! Fit after self-cal, rms=0.074939Jy sigma=0.271747 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074939Jy sigma=0.271747 ! Fit after self-cal, rms=0.073702Jy sigma=0.268319 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.055 mas, bmaj=4.154 mas, bpa=9.211 degrees ! Estimated noise=2.57029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00962794 Jy ! Component: 100 - total flux cleaned = -0.0147871 Jy ! Component: 150 - total flux cleaned = -0.0168333 Jy ! Component: 200 - total flux cleaned = -0.0183914 Jy ! Total flux subtracted in 200 components = -0.0183914 Jy ! Clean residual min=-0.007422 max=0.007296 Jy/beam ! Clean residual mean=-0.000015 rms=0.002105 Jy/beam ! Combined flux in latest and established models = 1.98589 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 147 components and 1.98589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072940Jy sigma=0.266162 ! Fit after self-cal, rms=0.072901Jy sigma=0.265818 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00191543 Jy ! Component: 100 - total flux cleaned = -0.00278691 Jy ! Component: 150 - total flux cleaned = -0.00330006 Jy ! Component: 200 - total flux cleaned = -0.00376111 Jy ! Total flux subtracted in 200 components = -0.00376111 Jy ! Clean residual min=-0.007389 max=0.007351 Jy/beam ! Clean residual mean=-0.000013 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 1.98213 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 155 components and 1.98213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072769Jy sigma=0.265508 ! Fit after self-cal, rms=0.072785Jy sigma=0.265460 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7776 mas, bmaj=1.875 mas, bpa=0.6738 degrees ! Estimated noise=1.79845 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7776 x 1.875 at 0.6738 degrees (North through East) ! Clean map min=-0.014532 max=1.7518 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072785Jy sigma=0.265460 ! Fit after self-cal, rms=0.068938Jy sigma=0.244515 ! Inverting map and beam ! Estimated beam: bmin=0.7777 mas, bmaj=1.875 mas, bpa=0.7011 degrees ! Estimated noise=1.79828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00706349 Jy ! Component: 100 - total flux cleaned = -0.00918672 Jy ! Component: 150 - total flux cleaned = -0.00989085 Jy ! Component: 200 - total flux cleaned = -0.0103802 Jy ! Total flux subtracted in 200 components = -0.0103802 Jy ! Clean residual min=-0.005279 max=0.005869 Jy/beam ! Clean residual mean=-0.000007 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 1.97175 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 166 components and 1.97175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068058Jy sigma=0.240868 ! Fit after self-cal, rms=0.067980Jy sigma=0.240699 ! Inverting map ! Added new window around map position (2.6, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387491 Jy ! Component: 100 - total flux cleaned = 0.00350492 Jy ! Component: 150 - total flux cleaned = 0.00361151 Jy ! Component: 200 - total flux cleaned = 0.00361258 Jy ! Total flux subtracted in 200 components = 0.00361258 Jy ! Clean residual min=-0.005059 max=0.004621 Jy/beam ! Clean residual mean=-0.000008 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 1.97536 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 183 components and 1.97536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067476Jy sigma=0.238704 ! Fit after self-cal, rms=0.067453Jy sigma=0.238641 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067453Jy sigma=0.238641 ! Fit after self-cal, rms=0.066979Jy sigma=0.237477 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6158 mas, bmaj=1.532 mas, bpa=0.6849 degrees ! Estimated noise=2.69325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.34304 Jy ! Component: 100 - total flux cleaned = 1.68054 Jy ! Component: 150 - total flux cleaned = 1.81747 Jy ! Component: 200 - total flux cleaned = 1.87711 Jy ! Total flux subtracted in 200 components = 1.87711 Jy ! Clean residual min=-0.015802 max=0.026209 Jy/beam ! Clean residual mean=-0.000006 rms=0.002913 Jy/beam ! Combined flux in latest and established models = 1.87711 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.87711 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7775 mas, bmaj=1.875 mas, bpa=0.7216 degrees ! Estimated noise=1.79723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365965 Jy ! Component: 100 - total flux cleaned = 0.0589859 Jy ! Component: 150 - total flux cleaned = 0.0741995 Jy ! Component: 200 - total flux cleaned = 0.083211 Jy ! Total flux subtracted in 200 components = 0.083211 Jy ! Clean residual min=-0.008582 max=0.008802 Jy/beam ! Clean residual mean=-0.000006 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 1.96032 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 1.96032 Jy ! Inverting map ! Added new window around map position (-0.8, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00492491 Jy ! Component: 100 - total flux cleaned = 0.00747156 Jy ! Component: 150 - total flux cleaned = 0.00995704 Jy ! Component: 200 - total flux cleaned = 0.0116774 Jy ! Total flux subtracted in 200 components = 0.0116774 Jy ! Clean residual min=-0.007289 max=0.006174 Jy/beam ! Clean residual mean=-0.000007 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 1.972 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 47 components and 1.972 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.057 mas, bmaj=4.156 mas, bpa=9.293 degrees ! Estimated noise=2.56775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168667 Jy ! Component: 100 - total flux cleaned = 0.00187462 Jy ! Component: 150 - total flux cleaned = 0.00202979 Jy ! Component: 200 - total flux cleaned = 0.00203166 Jy ! Total flux subtracted in 200 components = 0.00203166 Jy ! Clean residual min=-0.007138 max=0.006917 Jy/beam ! Clean residual mean=-0.000014 rms=0.001759 Jy/beam ! Combined flux in latest and established models = 1.97403 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144314 Jy ! Component: 100 - total flux cleaned = 0.000272454 Jy ! Component: 150 - total flux cleaned = 0.00027159 Jy ! Component: 200 - total flux cleaned = 0.00027421 Jy ! Total flux subtracted in 200 components = 0.00027421 Jy ! Clean residual min=-0.006805 max=0.006768 Jy/beam ! Clean residual mean=-0.000014 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 1.9743 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 78 components and 1.9743 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7775 mas, bmaj=1.875 mas, bpa=0.7216 degrees ! Estimated noise=1.79723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201184 Jy ! Component: 100 - total flux cleaned = 0.0026005 Jy ! Component: 150 - total flux cleaned = 0.00259729 Jy ! Component: 200 - total flux cleaned = 0.00293683 Jy ! Total flux subtracted in 200 components = 0.00293683 Jy ! Clean residual min=-0.005669 max=0.004868 Jy/beam ! Clean residual mean=-0.000008 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 1.97724 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 1.97724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067753Jy sigma=0.242991 ! Fit after self-cal, rms=0.067453Jy sigma=0.241154 wmodel J2011-1546_X_d_map.mod ! Writing 93 model components to file: J2011-1546_X_d_map.mod wobs J2011-1546_X_d_uvs.fits ! Writing UV FITS file: J2011-1546_X_d_uvs.fits wwins J2011-1546_X_d_map.win ! wwins: Wrote 8 windows to J2011-1546_X_d_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100729 Jy ! Component: 100 - total flux cleaned = -0.000918515 Jy ! Component: 150 - total flux cleaned = -0.000577491 Jy ! Component: 200 - total flux cleaned = -0.000165217 Jy ! Component: 250 - total flux cleaned = 0.000155198 Jy ! Component: 300 - total flux cleaned = 0.000466019 Jy ! Component: 350 - total flux cleaned = 0.000768736 Jy ! Component: 400 - total flux cleaned = 0.00113992 Jy ! Component: 450 - total flux cleaned = 0.00157562 Jy ! Component: 500 - total flux cleaned = 0.00185829 Jy ! Component: 550 - total flux cleaned = 0.00213818 Jy ! Component: 600 - total flux cleaned = 0.00268524 Jy ! Component: 650 - total flux cleaned = 0.0030883 Jy ! Component: 700 - total flux cleaned = 0.00341786 Jy ! Component: 750 - total flux cleaned = 0.00367807 Jy ! Component: 800 - total flux cleaned = 0.00393455 Jy ! Component: 850 - total flux cleaned = 0.00425158 Jy ! Component: 900 - total flux cleaned = 0.00444082 Jy ! Component: 950 - total flux cleaned = 0.00480987 Jy ! Component: 1000 - total flux cleaned = 0.00517262 Jy ! Component: 1050 - total flux cleaned = 0.00523145 Jy ! Component: 1100 - total flux cleaned = 0.00552699 Jy ! Component: 1150 - total flux cleaned = 0.0056431 Jy ! Component: 1200 - total flux cleaned = 0.00581572 Jy ! Component: 1250 - total flux cleaned = 0.00592892 Jy ! Component: 1300 - total flux cleaned = 0.00587225 Jy ! Component: 1350 - total flux cleaned = 0.00598383 Jy ! Component: 1400 - total flux cleaned = 0.00631273 Jy ! Component: 1450 - total flux cleaned = 0.00631232 Jy ! Component: 1500 - total flux cleaned = 0.00636542 Jy ! Component: 1550 - total flux cleaned = 0.00631298 Jy ! Component: 1600 - total flux cleaned = 0.00662717 Jy ! Component: 1650 - total flux cleaned = 0.00662627 Jy ! Component: 1700 - total flux cleaned = 0.00652364 Jy ! Component: 1750 - total flux cleaned = 0.00672693 Jy ! Component: 1800 - total flux cleaned = 0.00672782 Jy ! Component: 1850 - total flux cleaned = 0.00687686 Jy ! Component: 1900 - total flux cleaned = 0.00697474 Jy ! Component: 1950 - total flux cleaned = 0.00697458 Jy ! Component: 2000 - total flux cleaned = 0.00702266 Jy ! Component: 2050 - total flux cleaned = 0.0070692 Jy ! Component: 2100 - total flux cleaned = 0.0070231 Jy ! Component: 2150 - total flux cleaned = 0.00720751 Jy ! Component: 2200 - total flux cleaned = 0.00716157 Jy ! Component: 2250 - total flux cleaned = 0.00707055 Jy ! Component: 2300 - total flux cleaned = 0.00729613 Jy ! Component: 2350 - total flux cleaned = 0.00720707 Jy ! Component: 2400 - total flux cleaned = 0.00751704 Jy ! Component: 2450 - total flux cleaned = 0.00742929 Jy ! Component: 2500 - total flux cleaned = 0.007603 Jy ! Component: 2550 - total flux cleaned = 0.00764636 Jy ! Component: 2600 - total flux cleaned = 0.00768876 Jy ! Component: 2650 - total flux cleaned = 0.00764591 Jy ! Component: 2700 - total flux cleaned = 0.007688 Jy ! Component: 2750 - total flux cleaned = 0.00772945 Jy ! Component: 2800 - total flux cleaned = 0.00777057 Jy ! Component: 2850 - total flux cleaned = 0.00793347 Jy ! Component: 2900 - total flux cleaned = 0.00797394 Jy ! Component: 2950 - total flux cleaned = 0.00805404 Jy ! Component: 3000 - total flux cleaned = 0.00813328 Jy ! Component: 3050 - total flux cleaned = 0.00809436 Jy ! Component: 3100 - total flux cleaned = 0.00813387 Jy ! Component: 3150 - total flux cleaned = 0.0082885 Jy ! Component: 3200 - total flux cleaned = 0.00840354 Jy ! Component: 3250 - total flux cleaned = 0.00847912 Jy ! Component: 3300 - total flux cleaned = 0.00847897 Jy ! Component: 3350 - total flux cleaned = 0.00862895 Jy ! Component: 3400 - total flux cleaned = 0.00874033 Jy ! Component: 3450 - total flux cleaned = 0.00881376 Jy ! Component: 3500 - total flux cleaned = 0.00906925 Jy ! Component: 3550 - total flux cleaned = 0.00896035 Jy ! Component: 3600 - total flux cleaned = 0.00924804 Jy ! Component: 3650 - total flux cleaned = 0.00917682 Jy ! Component: 3700 - total flux cleaned = 0.0092125 Jy ! Component: 3750 - total flux cleaned = 0.00931812 Jy ! Component: 3800 - total flux cleaned = 0.00949222 Jy ! Component: 3850 - total flux cleaned = 0.00935385 Jy ! Component: 3900 - total flux cleaned = 0.00962877 Jy ! Component: 3950 - total flux cleaned = 0.00976545 Jy ! Component: 4000 - total flux cleaned = 0.00986676 Jy ! Component: 4050 - total flux cleaned = 0.0100009 Jy ! Total flux subtracted in 4096 components = 0.010034 Jy ! Clean residual min=-0.001736 max=0.001919 Jy/beam ! Clean residual mean=-0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 1.98727 Jy keep ! Adding 329 model components to the UV plane model. ! The established model now contains 419 components and 1.98727 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2011-1546_X_d_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7775 x 1.875 at 0.7216 degrees (North through East) ! Clean map min=-0.0048952 max=1.76 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2011-1546_X_d_map.fits wmodel /image_prod/ug002_uva//J2011-1546_X_d_map.mod ! Writing 419 model components to file: /image_prod/ug002_uva//J2011-1546_X_d_map.mod wobs /image_prod/ug002_uva//J2011-1546_X_d_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2011-1546_X_d_uvs.fits wwins /image_prod/ug002_uva//J2011-1546_X_d_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J2011-1546_X_d_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.76003 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000574758 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0979684 0.0979684 0.195937 0.391873 0.783747 1.56749 3.13499 6.26997 12.5399 25.0799 50.1598 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.76 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3062.21 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2011-1546_X_d_dfm.log closed on Thu Mar 5 04:39:12 2020