! Started logfile: /image_prod/ug002_uva//J2009+7229_X_dfm.log on Thu Mar 5 04:37:14 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2009+7229_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2009+7229_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.955926 visibilities/baseline/integration-bin. ! Found source: J2009+7229 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 30972 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2009+7229_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.221756Jy sigma=8.226663 ! Fit after self-cal, rms=0.403036Jy sigma=2.648953 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7781 mas, bmaj=0.9359 mas, bpa=84.3 degrees ! Estimated noise=1.14602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.463461 Jy ! Component: 100 - total flux cleaned = 0.596899 Jy ! Total flux subtracted in 100 components = 0.596899 Jy ! Clean residual min=-0.026165 max=0.061914 Jy/beam ! Clean residual mean=0.000029 rms=0.006704 Jy/beam ! Combined flux in latest and established models = 0.596899 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.596899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.216999Jy sigma=1.377730 ! Fit after self-cal, rms=0.216944Jy sigma=1.377473 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0736923 Jy ! Component: 100 - total flux cleaned = 0.120698 Jy ! Total flux subtracted in 100 components = 0.120698 Jy ! Clean residual min=-0.023935 max=0.041621 Jy/beam ! Clean residual mean=0.000017 rms=0.005766 Jy/beam ! Combined flux in latest and established models = 0.717597 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.717597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.173947Jy sigma=1.110888 ! Fit after self-cal, rms=0.173738Jy sigma=1.109551 ! Inverting map ! Added new window around map position (-1.2, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0426078 Jy ! Component: 100 - total flux cleaned = 0.0663284 Jy ! Total flux subtracted in 100 components = 0.0663284 Jy ! Clean residual min=-0.023344 max=0.037208 Jy/beam ! Clean residual mean=0.000011 rms=0.005374 Jy/beam ! Combined flux in latest and established models = 0.783925 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.783925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.159407Jy sigma=1.025119 ! Fit after self-cal, rms=0.158648Jy sigma=1.019343 ! Inverting map ! Added new window around map position (-8.8, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266957 Jy ! Component: 100 - total flux cleaned = 0.0354158 Jy ! Total flux subtracted in 100 components = 0.0354158 Jy ! Clean residual min=-0.023226 max=0.033552 Jy/beam ! Clean residual mean=0.000008 rms=0.005078 Jy/beam ! Combined flux in latest and established models = 0.819341 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 33 components and 0.819341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.151585Jy sigma=0.976731 ! Fit after self-cal, rms=0.151269Jy sigma=0.974413 ! Inverting map ! Added new window around map position (-9.8, 10.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152946 Jy ! Component: 100 - total flux cleaned = 0.0186804 Jy ! Total flux subtracted in 100 components = 0.0186804 Jy ! Clean residual min=-0.022274 max=0.032535 Jy/beam ! Clean residual mean=0.000008 rms=0.004839 Jy/beam ! Combined flux in latest and established models = 0.838022 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.838022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.146025Jy sigma=0.947973 ! Fit after self-cal, rms=0.145755Jy sigma=0.945973 ! Inverting map ! Added new window around map position (8.6, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282652 Jy ! Component: 100 - total flux cleaned = 0.0313635 Jy ! Total flux subtracted in 100 components = 0.0313635 Jy ! Clean residual min=-0.022152 max=0.026918 Jy/beam ! Clean residual mean=0.000006 rms=0.004612 Jy/beam ! Combined flux in latest and established models = 0.869385 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.869385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.140348Jy sigma=0.913135 ! Fit after self-cal, rms=0.140088Jy sigma=0.911345 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.984 mas, bmaj=1.21 mas, bpa=84.33 degrees ! Estimated noise=0.611181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00704831 Jy ! Component: 100 - total flux cleaned = 0.0167801 Jy ! Component: 150 - total flux cleaned = 0.0219333 Jy ! Component: 200 - total flux cleaned = 0.0244174 Jy ! Total flux subtracted in 200 components = 0.0244174 Jy ! Clean residual min=-0.018730 max=0.024082 Jy/beam ! Clean residual mean=0.000014 rms=0.004752 Jy/beam ! Combined flux in latest and established models = 0.893803 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 0.893803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135948Jy sigma=0.886126 ! Fit after self-cal, rms=0.135824Jy sigma=0.885140 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.984 x 1.21 at 84.33 degrees (North through East) ! Clean map min=-0.020819 max=0.63323 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.87 KP 1.01 ! LA 1.02 MK 1.16 NL 1.23 OV 0.94 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.87 KP 1.00 ! LA 1.02 MK 1.16 NL 1.22 OV 0.94 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.87 KP 1.00 ! LA 1.02 MK 1.14 NL 1.21 OV 0.94 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.88 KP 0.99 ! LA 1.03 MK 1.15 NL 1.21 OV 0.94 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.88 KP 1.00 ! LA 1.03 MK 1.14 NL 1.20 OV 0.94 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.88 KP 1.01 ! LA 1.02 MK 1.14 NL 1.21 OV 0.94 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.88 KP 1.00 ! LA 1.02 MK 1.14 NL 1.20 OV 0.94 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.88 KP 0.99 ! LA 1.03 MK 1.14 NL 1.21 OV 0.94 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.88 KP 0.99 ! LA 1.03 MK 1.16 NL 1.20 OV 0.94 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.89 KP 1.01 ! LA 1.02 MK 1.17 NL 1.19 OV 0.94 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.89 KP 1.00 ! LA 1.02 MK 1.15 NL 1.20 OV 0.93 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.89 KP 0.99 ! LA 1.02 MK 1.14 NL 1.21 OV 0.95 ! PT 0.93 SC 0.97 ! ! ! Fit before self-cal, rms=0.135824Jy sigma=0.885140 ! Fit after self-cal, rms=0.117098Jy sigma=0.711385 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9953 mas, bmaj=1.226 mas, bpa=82.71 degrees ! Estimated noise=0.612784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0174467 Jy ! Component: 100 - total flux cleaned = -0.0261568 Jy ! Component: 150 - total flux cleaned = -0.0311447 Jy ! Component: 200 - total flux cleaned = -0.0357576 Jy ! Total flux subtracted in 200 components = -0.0357576 Jy ! Clean residual min=-0.017475 max=0.016280 Jy/beam ! Clean residual mean=0.000010 rms=0.003420 Jy/beam ! Combined flux in latest and established models = 0.858045 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 81 components and 0.858045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113392Jy sigma=0.682480 ! Fit after self-cal, rms=0.113309Jy sigma=0.681806 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113309Jy sigma=0.681806 ! Fit after self-cal, rms=0.090055Jy sigma=0.451957 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9979 mas, bmaj=1.278 mas, bpa=78.28 degrees ! Estimated noise=0.621745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0133617 Jy ! Component: 100 - total flux cleaned = -0.018701 Jy ! Component: 150 - total flux cleaned = -0.0214563 Jy ! Component: 200 - total flux cleaned = -0.0227043 Jy ! Total flux subtracted in 200 components = -0.0227043 Jy ! Clean residual min=-0.005788 max=0.006588 Jy/beam ! Clean residual mean=0.000004 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.835341 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 87 components and 0.835341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086968Jy sigma=0.429009 ! Fit after self-cal, rms=0.086870Jy sigma=0.427911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.6, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137437 Jy ! Component: 100 - total flux cleaned = 0.000765099 Jy ! Component: 150 - total flux cleaned = 0.000208016 Jy ! Component: 200 - total flux cleaned = -0.000468372 Jy ! Total flux subtracted in 200 components = -0.000468372 Jy ! Clean residual min=-0.005335 max=0.006083 Jy/beam ! Clean residual mean=0.000004 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.834873 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 94 components and 0.834873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085888Jy sigma=0.420481 ! Fit after self-cal, rms=0.085833Jy sigma=0.420257 ! Inverting map ! Added new window around map position (-4.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353721 Jy ! Component: 100 - total flux cleaned = 0.00405791 Jy ! Component: 150 - total flux cleaned = 0.00405555 Jy ! Component: 200 - total flux cleaned = 0.00390535 Jy ! Total flux subtracted in 200 components = 0.00390535 Jy ! Clean residual min=-0.005289 max=0.005393 Jy/beam ! Clean residual mean=0.000003 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.838778 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.838778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085170Jy sigma=0.414274 ! Fit after self-cal, rms=0.085131Jy sigma=0.414083 ! Inverting map ! Added new window around map position (16, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024611 Jy ! Component: 100 - total flux cleaned = 0.00245257 Jy ! Component: 150 - total flux cleaned = 0.00273018 Jy ! Component: 200 - total flux cleaned = 0.00272504 Jy ! Total flux subtracted in 200 components = 0.00272504 Jy ! Clean residual min=-0.004916 max=0.004410 Jy/beam ! Clean residual mean=0.000004 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.841503 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 113 components and 0.841503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084615Jy sigma=0.409693 ! Fit after self-cal, rms=0.084599Jy sigma=0.409539 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084599Jy sigma=0.409539 ! Fit after self-cal, rms=0.086014Jy sigma=0.403883 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9962 mas, bmaj=1.278 mas, bpa=77.53 degrees ! Estimated noise=0.620883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0060312 Jy ! Component: 100 - total flux cleaned = -0.00748744 Jy ! Component: 150 - total flux cleaned = -0.00839936 Jy ! Component: 200 - total flux cleaned = -0.00867391 Jy ! Total flux subtracted in 200 components = -0.00867391 Jy ! Clean residual min=-0.004340 max=0.004026 Jy/beam ! Clean residual mean=0.000005 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.832829 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 115 components and 0.832829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085164Jy sigma=0.397926 ! Fit after self-cal, rms=0.085136Jy sigma=0.397777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238207 Jy ! Component: 100 - total flux cleaned = -0.000611932 Jy ! Component: 150 - total flux cleaned = -0.000965035 Jy ! Component: 200 - total flux cleaned = -0.00119059 Jy ! Total flux subtracted in 200 components = -0.00119059 Jy ! Clean residual min=-0.004220 max=0.003877 Jy/beam ! Clean residual mean=0.000005 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.831639 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 121 components and 0.831639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084787Jy sigma=0.395076 ! Fit after self-cal, rms=0.084766Jy sigma=0.394983 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084766Jy sigma=0.394983 ! Fit after self-cal, rms=0.085589Jy sigma=0.393743 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=2.598 mas, bpa=82.3 degrees ! Estimated noise=0.829508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123588 Jy ! Component: 100 - total flux cleaned = -0.00198276 Jy ! Component: 150 - total flux cleaned = -0.00237445 Jy ! Component: 200 - total flux cleaned = -0.00237488 Jy ! Total flux subtracted in 200 components = -0.00237488 Jy ! Clean residual min=-0.003750 max=0.003726 Jy/beam ! Clean residual mean=0.000012 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.829264 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 135 components and 0.829264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085472Jy sigma=0.392026 ! Fit after self-cal, rms=0.085460Jy sigma=0.391932 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.68913e-05 Jy ! Component: 100 - total flux cleaned = -6.48543e-06 Jy ! Component: 150 - total flux cleaned = -6.49704e-05 Jy ! Component: 200 - total flux cleaned = -6.89343e-05 Jy ! Total flux subtracted in 200 components = -6.89343e-05 Jy ! Clean residual min=-0.003803 max=0.003619 Jy/beam ! Clean residual mean=0.000012 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.829195 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 140 components and 0.829195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085398Jy sigma=0.391234 ! Fit after self-cal, rms=0.085387Jy sigma=0.391190 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9957 mas, bmaj=1.278 mas, bpa=77.17 degrees ! Estimated noise=0.620298 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9957 x 1.278 at 77.17 degrees (North through East) ! Clean map min=-0.0085541 max=0.64133 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085387Jy sigma=0.391190 ! Fit after self-cal, rms=0.082770Jy sigma=0.361411 ! Inverting map and beam ! Estimated beam: bmin=0.9962 mas, bmaj=1.278 mas, bpa=77.14 degrees ! Estimated noise=0.619689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149647 Jy ! Component: 100 - total flux cleaned = -0.00248535 Jy ! Component: 150 - total flux cleaned = -0.00346978 Jy ! Component: 200 - total flux cleaned = -0.00408507 Jy ! Total flux subtracted in 200 components = -0.00408507 Jy ! Clean residual min=-0.003940 max=0.003894 Jy/beam ! Clean residual mean=0.000006 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.82511 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 145 components and 0.82511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082379Jy sigma=0.358731 ! Fit after self-cal, rms=0.082356Jy sigma=0.358631 ! Inverting map ! Added new window around map position (-3, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254337 Jy ! Component: 100 - total flux cleaned = 0.00223551 Jy ! Component: 150 - total flux cleaned = 0.00233418 Jy ! Component: 200 - total flux cleaned = 0.00214563 Jy ! Total flux subtracted in 200 components = 0.00214563 Jy ! Clean residual min=-0.003713 max=0.003537 Jy/beam ! Clean residual mean=0.000005 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.827255 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 155 components and 0.827255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082054Jy sigma=0.356060 ! Fit after self-cal, rms=0.082035Jy sigma=0.355940 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082035Jy sigma=0.355940 ! Fit after self-cal, rms=0.082657Jy sigma=0.355566 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.782 mas, bmaj=1.009 mas, bpa=74.48 degrees ! Estimated noise=1.1857 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.478882 Jy ! Component: 100 - total flux cleaned = 0.610142 Jy ! Component: 150 - total flux cleaned = 0.673917 Jy ! Component: 200 - total flux cleaned = 0.714003 Jy ! Total flux subtracted in 200 components = 0.714003 Jy ! Clean residual min=-0.009441 max=0.021683 Jy/beam ! Clean residual mean=0.000012 rms=0.001930 Jy/beam ! Combined flux in latest and established models = 0.714002 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.714002 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9962 mas, bmaj=1.278 mas, bpa=76.91 degrees ! Estimated noise=0.619408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0396547 Jy ! Component: 100 - total flux cleaned = 0.0619556 Jy ! Component: 150 - total flux cleaned = 0.0758938 Jy ! Component: 200 - total flux cleaned = 0.0849453 Jy ! Total flux subtracted in 200 components = 0.0849453 Jy ! Clean residual min=-0.003547 max=0.006265 Jy/beam ! Clean residual mean=0.000009 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.798948 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 0.798948 Jy ! Inverting map ! Added new window around map position (1.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00684015 Jy ! Component: 100 - total flux cleaned = 0.0124302 Jy ! Component: 150 - total flux cleaned = 0.016882 Jy ! Component: 200 - total flux cleaned = 0.0200007 Jy ! Total flux subtracted in 200 components = 0.0200007 Jy ! Clean residual min=-0.003132 max=0.003700 Jy/beam ! Clean residual mean=0.000005 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.818948 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 59 components and 0.818948 Jy ! Inverting map ! Added new window around map position (-3.4, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324749 Jy ! Component: 100 - total flux cleaned = 0.00475205 Jy ! Component: 150 - total flux cleaned = 0.00588969 Jy ! Component: 200 - total flux cleaned = 0.00710203 Jy ! Total flux subtracted in 200 components = 0.00710203 Jy ! Clean residual min=-0.003009 max=0.003219 Jy/beam ! Clean residual mean=0.000004 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.82605 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 77 components and 0.82605 Jy ! Inverting map ! Added new window around map position (0, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220354 Jy ! Component: 100 - total flux cleaned = 0.00282917 Jy ! Component: 150 - total flux cleaned = 0.00377878 Jy ! Component: 200 - total flux cleaned = 0.00423086 Jy ! Total flux subtracted in 200 components = 0.00423086 Jy ! Clean residual min=-0.002866 max=0.002825 Jy/beam ! Clean residual mean=0.000004 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.830281 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 92 components and 0.830281 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=2.595 mas, bpa=82.28 degrees ! Estimated noise=0.828547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267903 Jy ! Component: 100 - total flux cleaned = 0.00362316 Jy ! Component: 150 - total flux cleaned = 0.00401664 Jy ! Component: 200 - total flux cleaned = 0.00441952 Jy ! Total flux subtracted in 200 components = 0.00441952 Jy ! Clean residual min=-0.002935 max=0.003060 Jy/beam ! Clean residual mean=0.000007 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.834701 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210398 Jy ! Component: 100 - total flux cleaned = 0.000406692 Jy ! Component: 150 - total flux cleaned = 0.000591511 Jy ! Component: 200 - total flux cleaned = 0.000633339 Jy ! Total flux subtracted in 200 components = 0.000633339 Jy ! Clean residual min=-0.002873 max=0.002965 Jy/beam ! Clean residual mean=0.000007 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.835334 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 132 components and 0.835334 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9962 mas, bmaj=1.278 mas, bpa=76.91 degrees ! Estimated noise=0.619408 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104838 Jy ! Component: 100 - total flux cleaned = 0.00010408 Jy ! Component: 150 - total flux cleaned = 0.000393654 Jy ! Component: 200 - total flux cleaned = 0.000393414 Jy ! Total flux subtracted in 200 components = 0.000393414 Jy ! Clean residual min=-0.002721 max=0.002593 Jy/beam ! Clean residual mean=0.000003 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.835728 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 144 components and 0.835728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083883Jy sigma=0.349101 ! Fit after self-cal, rms=0.083660Jy sigma=0.347908 wmodel J2009+7229_X_map.mod ! Writing 144 model components to file: J2009+7229_X_map.mod wobs J2009+7229_X_uvs.fits ! Writing UV FITS file: J2009+7229_X_uvs.fits wwins J2009+7229_X_map.win ! wwins: Wrote 12 windows to J2009+7229_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532151 Jy ! Component: 100 - total flux cleaned = 0.000671867 Jy ! Component: 150 - total flux cleaned = 0.000670252 Jy ! Component: 200 - total flux cleaned = 0.00075473 Jy ! Component: 250 - total flux cleaned = 0.000921868 Jy ! Component: 300 - total flux cleaned = 0.00120872 Jy ! Component: 350 - total flux cleaned = 0.00136954 Jy ! Component: 400 - total flux cleaned = 0.00160645 Jy ! Component: 450 - total flux cleaned = 0.00168433 Jy ! Component: 500 - total flux cleaned = 0.0017983 Jy ! Component: 550 - total flux cleaned = 0.00191144 Jy ! Component: 600 - total flux cleaned = 0.00206002 Jy ! Component: 650 - total flux cleaned = 0.00217018 Jy ! Component: 700 - total flux cleaned = 0.00238775 Jy ! Component: 750 - total flux cleaned = 0.00256662 Jy ! Component: 800 - total flux cleaned = 0.00274357 Jy ! Component: 850 - total flux cleaned = 0.00295323 Jy ! Component: 900 - total flux cleaned = 0.00305733 Jy ! Component: 950 - total flux cleaned = 0.00329707 Jy ! Component: 1000 - total flux cleaned = 0.00346668 Jy ! Component: 1050 - total flux cleaned = 0.003635 Jy ! Component: 1100 - total flux cleaned = 0.0038014 Jy ! Component: 1150 - total flux cleaned = 0.00396639 Jy ! Component: 1200 - total flux cleaned = 0.00409717 Jy ! Component: 1250 - total flux cleaned = 0.00429202 Jy ! Component: 1300 - total flux cleaned = 0.00435661 Jy ! Component: 1350 - total flux cleaned = 0.00438855 Jy ! Component: 1400 - total flux cleaned = 0.00461073 Jy ! Component: 1450 - total flux cleaned = 0.00457929 Jy ! Component: 1500 - total flux cleaned = 0.00461038 Jy ! Component: 1550 - total flux cleaned = 0.00473438 Jy ! Component: 1600 - total flux cleaned = 0.00482716 Jy ! Component: 1650 - total flux cleaned = 0.00491875 Jy ! Component: 1700 - total flux cleaned = 0.00507063 Jy ! Component: 1750 - total flux cleaned = 0.00528189 Jy ! Component: 1800 - total flux cleaned = 0.00525203 Jy ! Component: 1850 - total flux cleaned = 0.00543129 Jy ! Component: 1900 - total flux cleaned = 0.0056092 Jy ! Component: 1950 - total flux cleaned = 0.00584482 Jy ! Component: 2000 - total flux cleaned = 0.00584485 Jy ! Component: 2050 - total flux cleaned = 0.00590312 Jy ! Component: 2100 - total flux cleaned = 0.00610623 Jy ! Component: 2150 - total flux cleaned = 0.00622144 Jy ! Component: 2200 - total flux cleaned = 0.00636469 Jy ! Component: 2250 - total flux cleaned = 0.00642166 Jy ! Component: 2300 - total flux cleaned = 0.00661987 Jy ! Component: 2350 - total flux cleaned = 0.00670416 Jy ! Component: 2400 - total flux cleaned = 0.00667609 Jy ! Component: 2450 - total flux cleaned = 0.00689926 Jy ! Component: 2500 - total flux cleaned = 0.00689925 Jy ! Component: 2550 - total flux cleaned = 0.00709215 Jy ! Component: 2600 - total flux cleaned = 0.00722927 Jy ! Component: 2650 - total flux cleaned = 0.00736585 Jy ! Component: 2700 - total flux cleaned = 0.00733855 Jy ! Component: 2750 - total flux cleaned = 0.00750044 Jy ! Component: 2800 - total flux cleaned = 0.00763471 Jy ! Component: 2850 - total flux cleaned = 0.00771491 Jy ! Component: 2900 - total flux cleaned = 0.00774149 Jy ! Component: 2950 - total flux cleaned = 0.00782096 Jy ! Component: 3000 - total flux cleaned = 0.00792631 Jy ! Component: 3050 - total flux cleaned = 0.00808355 Jy ! Component: 3100 - total flux cleaned = 0.00816181 Jy ! Component: 3150 - total flux cleaned = 0.00823965 Jy ! Component: 3200 - total flux cleaned = 0.00829134 Jy ! Component: 3250 - total flux cleaned = 0.00831731 Jy ! Component: 3300 - total flux cleaned = 0.00847061 Jy ! Component: 3350 - total flux cleaned = 0.00854709 Jy ! Component: 3400 - total flux cleaned = 0.0087243 Jy ! Component: 3450 - total flux cleaned = 0.00879999 Jy ! Component: 3500 - total flux cleaned = 0.00887525 Jy ! Component: 3550 - total flux cleaned = 0.00900013 Jy ! Component: 3600 - total flux cleaned = 0.00897548 Jy ! Component: 3650 - total flux cleaned = 0.00907453 Jy ! Component: 3700 - total flux cleaned = 0.00922236 Jy ! Component: 3750 - total flux cleaned = 0.00924675 Jy ! Component: 3800 - total flux cleaned = 0.00941761 Jy ! Component: 3850 - total flux cleaned = 0.00951482 Jy ! Component: 3900 - total flux cleaned = 0.00961164 Jy ! Component: 3950 - total flux cleaned = 0.0096599 Jy ! Component: 4000 - total flux cleaned = 0.00973193 Jy ! Component: 4050 - total flux cleaned = 0.0098036 Jy ! Total flux subtracted in 4096 components = 0.00987498 Jy ! Clean residual min=-0.001188 max=0.001325 Jy/beam ! Clean residual mean=0.000001 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.845603 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 424 components and 0.845603 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2009+7229_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9962 x 1.278 at 76.91 degrees (North through East) ! Clean map min=-0.0022425 max=0.64642 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2009+7229_X_map.fits wmodel /image_prod/ug002_uva//J2009+7229_X_map.mod ! Writing 424 model components to file: /image_prod/ug002_uva//J2009+7229_X_map.mod wobs /image_prod/ug002_uva//J2009+7229_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2009+7229_X_uvs.fits wwins /image_prod/ug002_uva//J2009+7229_X_map.win ! wwins: Wrote 13 windows to /image_prod/ug002_uva//J2009+7229_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.646419 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000371898 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.172596 0.172596 0.345192 0.690384 1.38077 2.76153 5.52307 11.0461 22.0923 44.1845 88.3691 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.646 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1738.16 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2009+7229_X_dfm.log closed on Thu Mar 5 04:37:20 2020