! Started logfile: /image_prod/ug002_uva//J2006-1222_S_dfm.log on Thu Mar  5 04:35:27 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2006-1222_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2006-1222_S_uva.fits
! AN table 1: 50 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.976111 visibilities/baseline/integration-bin.
! Found source: J2006-1222
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5271 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2006-1222_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021184Jy  sigma=7.627122
! Fit after  self-cal, rms=0.834134Jy  sigma=6.190639
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.462 mas, bmaj=6.998 mas, bpa=-4.161 degrees
! Estimated noise=2.0483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12658 Jy
! Component: 100  -  total flux cleaned = 0.158573 Jy
! Total flux subtracted in 100 components = 0.158573 Jy
! Clean residual min=-0.007890 max=0.013088 Jy/beam
! Clean residual mean=-0.000005 rms=0.002271 Jy/beam
! Combined flux in latest and established models = 0.158573 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.158573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074005Jy  sigma=0.514970
! Fit after  self-cal, rms=0.073991Jy  sigma=0.514900
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.985 mas, bmaj=7.672 mas, bpa=-2.768 degrees
! Estimated noise=1.35235 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162472 Jy
! Component: 100  -  total flux cleaned = 0.0224053 Jy
! Component: 150  -  total flux cleaned = 0.0245813 Jy
! Component: 200  -  total flux cleaned = 0.0248056 Jy
! Total flux subtracted in 200 components = 0.0248056 Jy
! Clean residual min=-0.007624 max=0.007693 Jy/beam
! Clean residual mean=-0.000024 rms=0.001808 Jy/beam
! Combined flux in latest and established models = 0.183379 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 22 components and 0.183379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071166Jy  sigma=0.488706
! Fit after  self-cal, rms=0.071152Jy  sigma=0.488641
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.985 x 7.672 at -2.768 degrees (North through East)
! Clean map  min=-0.0074726  max=0.1675 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.18     HN        1.09     KP        0.97     
!   LA        0.95     MK        0.98     NL        1.07     OV        0.81     
!   SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.10     KP        1.06     
!   LA        1.02     MK        0.99     NL        0.99     OV        0.85     
!   SC        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        1.10     KP        1.03     
!   LA        0.98     MK        0.96     NL        1.04     OV        0.88     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.071152Jy  sigma=0.488641
! Fit after  self-cal, rms=0.070932Jy  sigma=0.467673
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.98 mas, bmaj=7.667 mas, bpa=-2.601 degrees
! Estimated noise=1.34777 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (18, 87.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00578981 Jy
! Component: 100  -  total flux cleaned = 0.00591304 Jy
! Component: 150  -  total flux cleaned = 0.00608011 Jy
! Component: 200  -  total flux cleaned = 0.00650176 Jy
! Total flux subtracted in 200 components = 0.00650176 Jy
! Clean residual min=-0.003970 max=0.004086 Jy/beam
! Clean residual mean=-0.000005 rms=0.001061 Jy/beam
! Combined flux in latest and established models = 0.18988 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 43 components and 0.18988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070418Jy  sigma=0.463829
! Fit after  self-cal, rms=0.070522Jy  sigma=0.463406
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070522Jy  sigma=0.463406
! Fit after  self-cal, rms=0.068617Jy  sigma=0.454630
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.979 mas, bmaj=7.674 mas, bpa=-2.727 degrees
! Estimated noise=1.34536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.3584e-05 Jy
! Component: 100  -  total flux cleaned = -3.31997e-05 Jy
! Component: 150  -  total flux cleaned = 1.13044e-05 Jy
! Component: 200  -  total flux cleaned = 1.12194e-05 Jy
! Total flux subtracted in 200 components = 1.12194e-05 Jy
! Clean residual min=-0.003210 max=0.003560 Jy/beam
! Clean residual mean=-0.000003 rms=0.000759 Jy/beam
! Combined flux in latest and established models = 0.189892 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 57 components and 0.189892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068558Jy  sigma=0.454188
! Fit after  self-cal, rms=0.068557Jy  sigma=0.454127
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.5, 16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349304 Jy
! Component: 100  -  total flux cleaned = 0.00423451 Jy
! Component: 150  -  total flux cleaned = 0.00416737 Jy
! Component: 200  -  total flux cleaned = 0.00405403 Jy
! Total flux subtracted in 200 components = 0.00405403 Jy
! Clean residual min=-0.002781 max=0.002800 Jy/beam
! Clean residual mean=-0.000002 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.193946 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 0.193946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068331Jy  sigma=0.452528
! Fit after  self-cal, rms=0.068319Jy  sigma=0.452404
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068319Jy  sigma=0.452404
! Fit after  self-cal, rms=0.068142Jy  sigma=0.452230
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.971 mas, bmaj=7.665 mas, bpa=-2.811 degrees
! Estimated noise=1.34468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107132 Jy
! Component: 100  -  total flux cleaned = 0.00118255 Jy
! Component: 150  -  total flux cleaned = 0.00113884 Jy
! Component: 200  -  total flux cleaned = 0.00101069 Jy
! Total flux subtracted in 200 components = 0.00101069 Jy
! Clean residual min=-0.002564 max=0.002483 Jy/beam
! Clean residual mean=-0.000001 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.194956 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 95 components and 0.194956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068058Jy  sigma=0.451676
! Fit after  self-cal, rms=0.068047Jy  sigma=0.451632
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000216147 Jy
! Component: 100  -  total flux cleaned = 6.41749e-05 Jy
! Component: 150  -  total flux cleaned = -0.000113934 Jy
! Component: 200  -  total flux cleaned = -0.000313846 Jy
! Total flux subtracted in 200 components = -0.000313846 Jy
! Clean residual min=-0.002574 max=0.002458 Jy/beam
! Clean residual mean=-0.000001 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.194642 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 107 components and 0.194642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068005Jy  sigma=0.451368
! Fit after  self-cal, rms=0.068004Jy  sigma=0.451357
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068004Jy  sigma=0.451357
! Fit after  self-cal, rms=0.068003Jy  sigma=0.451286
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.039 mas, bmaj=14.02 mas, bpa=2.475 degrees
! Estimated noise=1.72357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.53058e-05 Jy
! Component: 100  -  total flux cleaned = -0.000139111 Jy
! Component: 150  -  total flux cleaned = -0.000301667 Jy
! Component: 200  -  total flux cleaned = -0.000464321 Jy
! Total flux subtracted in 200 components = -0.000464321 Jy
! Clean residual min=-0.003105 max=0.002961 Jy/beam
! Clean residual mean=-0.000002 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.194178 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 131 components and 0.194178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067979Jy  sigma=0.451161
! Fit after  self-cal, rms=0.067978Jy  sigma=0.451143
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116367 Jy
! Component: 100  -  total flux cleaned = -5.18742e-05 Jy
! Component: 150  -  total flux cleaned = -0.000179863 Jy
! Component: 200  -  total flux cleaned = -0.000237665 Jy
! Total flux subtracted in 200 components = -0.000237665 Jy
! Clean residual min=-0.002981 max=0.002950 Jy/beam
! Clean residual mean=-0.000001 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.19394 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 139 components and 0.19394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067967Jy  sigma=0.451104
! Fit after  self-cal, rms=0.067969Jy  sigma=0.451096
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.968 mas, bmaj=7.658 mas, bpa=-2.83 degrees
! Estimated noise=1.34655 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.968 x 7.658 at -2.83 degrees (North through East)
! Clean map  min=-0.0025203  max=0.1664 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.446 mas, bmaj=6.974 mas, bpa=-4.214 degrees
! Estimated noise=2.04808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126425 Jy
! Component: 100  -  total flux cleaned = 0.159372 Jy
! Component: 150  -  total flux cleaned = 0.173657 Jy
! Component: 200  -  total flux cleaned = 0.181612 Jy
! Total flux subtracted in 200 components = 0.181612 Jy
! Clean residual min=-0.004951 max=0.004823 Jy/beam
! Clean residual mean=0.000001 rms=0.001282 Jy/beam
! Combined flux in latest and established models = 0.181612 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.181612 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.968 mas, bmaj=7.658 mas, bpa=-2.83 degrees
! Estimated noise=1.34655 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00636274 Jy
! Component: 100  -  total flux cleaned = 0.0101751 Jy
! Component: 150  -  total flux cleaned = 0.0118557 Jy
! Component: 200  -  total flux cleaned = 0.0125738 Jy
! Total flux subtracted in 200 components = 0.0125738 Jy
! Clean residual min=-0.002824 max=0.002470 Jy/beam
! Clean residual mean=0.000000 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.194185 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 41 components and 0.194185 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.039 mas, bmaj=14.02 mas, bpa=2.475 degrees
! Estimated noise=1.72357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126046 Jy
! Component: 100  -  total flux cleaned = 0.00141425 Jy
! Component: 150  -  total flux cleaned = 0.00137838 Jy
! Component: 200  -  total flux cleaned = 0.00134733 Jy
! Total flux subtracted in 200 components = 0.00134733 Jy
! Clean residual min=-0.003166 max=0.003063 Jy/beam
! Clean residual mean=0.000000 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.195533 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.42752e-05 Jy
! Component: 100  -  total flux cleaned = -0.000136774 Jy
! Component: 150  -  total flux cleaned = -0.000188136 Jy
! Component: 200  -  total flux cleaned = -0.000261529 Jy
! Total flux subtracted in 200 components = -0.000261529 Jy
! Clean residual min=-0.003073 max=0.003033 Jy/beam
! Clean residual mean=-0.000000 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 0.195271 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 69 components and 0.195271 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.968 mas, bmaj=7.658 mas, bpa=-2.83 degrees
! Estimated noise=1.34655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000644634 Jy
! Component: 100  -  total flux cleaned = -0.000701942 Jy
! Component: 150  -  total flux cleaned = -0.000702572 Jy
! Component: 200  -  total flux cleaned = -0.000704583 Jy
! Total flux subtracted in 200 components = -0.000704583 Jy
! Clean residual min=-0.002563 max=0.002236 Jy/beam
! Clean residual mean=0.000000 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.194567 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 93 components and 0.194567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068047Jy  sigma=0.451525
! Fit after  self-cal, rms=0.068028Jy  sigma=0.451431
wmodel J2006-1222_S_map.mod
! Writing 93 model components to file: J2006-1222_S_map.mod
wobs   J2006-1222_S_uvs.fits
! Writing UV FITS file: J2006-1222_S_uvs.fits
wwins  J2006-1222_S_map.win
! wwins: Wrote 3 windows to J2006-1222_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000821226 Jy
! Component: 100  -  total flux cleaned = -0.00117932 Jy
! Component: 150  -  total flux cleaned = -0.00140269 Jy
! Component: 200  -  total flux cleaned = -0.0014741 Jy
! Component: 250  -  total flux cleaned = -0.00140828 Jy
! Component: 300  -  total flux cleaned = -0.00140849 Jy
! Component: 350  -  total flux cleaned = -0.00128337 Jy
! Component: 400  -  total flux cleaned = -0.00122311 Jy
! Component: 450  -  total flux cleaned = -0.00119363 Jy
! Component: 500  -  total flux cleaned = -0.00113515 Jy
! Component: 550  -  total flux cleaned = -0.00105097 Jy
! Component: 600  -  total flux cleaned = -0.00107814 Jy
! Component: 650  -  total flux cleaned = -0.00107737 Jy
! Component: 700  -  total flux cleaned = -0.0010244 Jy
! Component: 750  -  total flux cleaned = -0.000972989 Jy
! Component: 800  -  total flux cleaned = -0.000897442 Jy
! Component: 850  -  total flux cleaned = -0.000872487 Jy
! Component: 900  -  total flux cleaned = -0.000872021 Jy
! Component: 950  -  total flux cleaned = -0.000753726 Jy
! Component: 1000  -  total flux cleaned = -0.00073083 Jy
! Component: 1050  -  total flux cleaned = -0.000685053 Jy
! Component: 1100  -  total flux cleaned = -0.000640037 Jy
! Component: 1150  -  total flux cleaned = -0.00061813 Jy
! Component: 1200  -  total flux cleaned = -0.000639386 Jy
! Component: 1250  -  total flux cleaned = -0.000596556 Jy
! Component: 1300  -  total flux cleaned = -0.000575273 Jy
! Component: 1350  -  total flux cleaned = -0.000513753 Jy
! Component: 1400  -  total flux cleaned = -0.000493535 Jy
! Component: 1450  -  total flux cleaned = -0.000433769 Jy
! Component: 1500  -  total flux cleaned = -0.000394646 Jy
! Component: 1550  -  total flux cleaned = -0.000452968 Jy
! Component: 1600  -  total flux cleaned = -0.000414999 Jy
! Component: 1650  -  total flux cleaned = -0.00039601 Jy
! Component: 1700  -  total flux cleaned = -0.000377594 Jy
! Component: 1750  -  total flux cleaned = -0.000305172 Jy
! Component: 1800  -  total flux cleaned = -0.000359044 Jy
! Component: 1850  -  total flux cleaned = -0.000323566 Jy
! Component: 1900  -  total flux cleaned = -0.000306018 Jy
! Component: 1950  -  total flux cleaned = -0.000306235 Jy
! Component: 2000  -  total flux cleaned = -0.000306233 Jy
! Component: 2050  -  total flux cleaned = -0.000289445 Jy
! Component: 2100  -  total flux cleaned = -0.000305852 Jy
! Component: 2150  -  total flux cleaned = -0.000354605 Jy
! Component: 2200  -  total flux cleaned = -0.000306097 Jy
! Component: 2250  -  total flux cleaned = -0.000306325 Jy
! Component: 2300  -  total flux cleaned = -0.0003222 Jy
! Component: 2350  -  total flux cleaned = -0.000368594 Jy
! Component: 2400  -  total flux cleaned = -0.00039919 Jy
! Component: 2450  -  total flux cleaned = -0.000398983 Jy
! Component: 2500  -  total flux cleaned = -0.000443502 Jy
! Component: 2550  -  total flux cleaned = -0.000487605 Jy
! Component: 2600  -  total flux cleaned = -0.000458368 Jy
! Component: 2650  -  total flux cleaned = -0.000501669 Jy
! Component: 2700  -  total flux cleaned = -0.000473375 Jy
! Component: 2750  -  total flux cleaned = -0.000543672 Jy
! Component: 2800  -  total flux cleaned = -0.000543526 Jy
! Component: 2850  -  total flux cleaned = -0.000502026 Jy
! Component: 2900  -  total flux cleaned = -0.00048841 Jy
! Component: 2950  -  total flux cleaned = -0.000488257 Jy
! Component: 3000  -  total flux cleaned = -0.000501681 Jy
! Component: 3050  -  total flux cleaned = -0.000461994 Jy
! Component: 3100  -  total flux cleaned = -0.000448914 Jy
! Component: 3150  -  total flux cleaned = -0.000474969 Jy
! Component: 3200  -  total flux cleaned = -0.000474832 Jy
! Component: 3250  -  total flux cleaned = -0.00044926 Jy
! Component: 3300  -  total flux cleaned = -0.000424058 Jy
! Component: 3350  -  total flux cleaned = -0.000386455 Jy
! Component: 3400  -  total flux cleaned = -0.00043647 Jy
! Component: 3450  -  total flux cleaned = -0.000436423 Jy
! Component: 3500  -  total flux cleaned = -0.00046087 Jy
! Component: 3550  -  total flux cleaned = -0.00043658 Jy
! Component: 3600  -  total flux cleaned = -0.000424476 Jy
! Component: 3650  -  total flux cleaned = -0.000448456 Jy
! Component: 3700  -  total flux cleaned = -0.000400961 Jy
! Component: 3750  -  total flux cleaned = -0.000459797 Jy
! Component: 3800  -  total flux cleaned = -0.000436384 Jy
! Component: 3850  -  total flux cleaned = -0.000436345 Jy
! Component: 3900  -  total flux cleaned = -0.000447801 Jy
! Component: 3950  -  total flux cleaned = -0.00041344 Jy
! Component: 4000  -  total flux cleaned = -0.000436136 Jy
! Component: 4050  -  total flux cleaned = -0.000436165 Jy
! Total flux subtracted in 4096 components = -0.000413616 Jy
! Clean residual min=-0.000676 max=0.000769 Jy/beam
! Clean residual mean=0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.194153 Jy
keep
! Adding 269 model components to the UV plane model.
! The established model now contains 362 components and 0.194153 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2006-1222_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.968 x 7.658 at -2.83 degrees (North through East)
! Clean map  min=-0.0017516  max=0.16536 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2006-1222_S_map.fits
wmodel /image_prod/ug002_uva//J2006-1222_S_map.mod
! Writing 362 model components to file: /image_prod/ug002_uva//J2006-1222_S_map.mod
wobs   /image_prod/ug002_uva//J2006-1222_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2006-1222_S_uvs.fits
wwins  /image_prod/ug002_uva//J2006-1222_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2006-1222_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.165356 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000188795 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.342526 0.342526 0.685052 1.3701 2.74021 5.48042 10.9608 21.9217 43.8433 87.6867
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.165 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  875.845 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2006-1222_S_dfm.log closed on Thu Mar  5 04:35:31 2020