! Started logfile: /image_prod/ug002_uva//J2006+6424_X_dfm.log on Thu Mar 5 04:35:20 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2006+6424_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2006+6424_X_uva.fits ! AN table 1: 100 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.772 visibilities/baseline/integration-bin. ! Found source: J2006+6424 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 41688 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2006+6424_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.138252Jy sigma=8.404307 ! Fit after self-cal, rms=0.504996Jy sigma=3.726268 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7216 mas, bmaj=1.004 mas, bpa=-18.41 degrees ! Estimated noise=1.0346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.36413 Jy ! Component: 100 - total flux cleaned = 0.459658 Jy ! Total flux subtracted in 100 components = 0.459658 Jy ! Clean residual min=-0.018168 max=0.041472 Jy/beam ! Clean residual mean=-0.000012 rms=0.004100 Jy/beam ! Combined flux in latest and established models = 0.459658 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.459658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141795Jy sigma=1.006607 ! Fit after self-cal, rms=0.141718Jy sigma=1.006065 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.046491 Jy ! Component: 100 - total flux cleaned = 0.0749899 Jy ! Total flux subtracted in 100 components = 0.0749899 Jy ! Clean residual min=-0.015719 max=0.031089 Jy/beam ! Clean residual mean=-0.000007 rms=0.003306 Jy/beam ! Combined flux in latest and established models = 0.534648 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.534648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113966Jy sigma=0.795617 ! Fit after self-cal, rms=0.113912Jy sigma=0.795231 ! Inverting map ! Added new window around map position (1.4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028196 Jy ! Component: 100 - total flux cleaned = 0.0445555 Jy ! Total flux subtracted in 100 components = 0.0445555 Jy ! Clean residual min=-0.013340 max=0.027485 Jy/beam ! Clean residual mean=-0.000002 rms=0.002964 Jy/beam ! Combined flux in latest and established models = 0.579204 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.579204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104971Jy sigma=0.733121 ! Fit after self-cal, rms=0.103797Jy sigma=0.723845 ! Inverting map ! Added new window around map position (-4, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226767 Jy ! Component: 100 - total flux cleaned = 0.0369324 Jy ! Total flux subtracted in 100 components = 0.0369324 Jy ! Clean residual min=-0.012774 max=0.019870 Jy/beam ! Clean residual mean=0.000000 rms=0.002668 Jy/beam ! Combined flux in latest and established models = 0.616136 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.616136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098743Jy sigma=0.688310 ! Fit after self-cal, rms=0.098265Jy sigma=0.684274 ! Inverting map ! Added new window around map position (4, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163734 Jy ! Component: 100 - total flux cleaned = 0.0279075 Jy ! Total flux subtracted in 100 components = 0.0279075 Jy ! Clean residual min=-0.013583 max=0.017087 Jy/beam ! Clean residual mean=0.000002 rms=0.002499 Jy/beam ! Combined flux in latest and established models = 0.644044 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.644044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095278Jy sigma=0.664250 ! Fit after self-cal, rms=0.095184Jy sigma=0.663592 ! Inverting map ! Added new window around map position (-2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156957 Jy ! Component: 100 - total flux cleaned = 0.0236542 Jy ! Total flux subtracted in 100 components = 0.0236542 Jy ! Clean residual min=-0.011952 max=0.013636 Jy/beam ! Clean residual mean=0.000004 rms=0.002370 Jy/beam ! Combined flux in latest and established models = 0.667698 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 0.667698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092113Jy sigma=0.642466 ! Fit after self-cal, rms=0.091996Jy sigma=0.641439 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9639 mas, bmaj=1.273 mas, bpa=-16.99 degrees ! Estimated noise=0.476095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128754 Jy ! Component: 100 - total flux cleaned = 0.0171114 Jy ! Component: 150 - total flux cleaned = 0.0182824 Jy ! Component: 200 - total flux cleaned = 0.0188173 Jy ! Total flux subtracted in 200 components = 0.0188173 Jy ! Clean residual min=-0.013237 max=0.014280 Jy/beam ! Clean residual mean=0.000008 rms=0.002817 Jy/beam ! Combined flux in latest and established models = 0.686515 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.686515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089214Jy sigma=0.624299 ! Fit after self-cal, rms=0.089148Jy sigma=0.623780 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9639 x 1.273 at -16.99 degrees (North through East) ! Clean map min=-0.011918 max=0.48772 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.97 KP 1.04 ! LA 1.00 MK 1.00 NL 1.09 OV 0.94 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.96 KP 1.04 ! LA 1.03 MK 1.00 NL 1.12 OV 0.93 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.97 KP 1.05 ! LA 1.00 MK 1.02 NL 1.12 OV 0.94 ! PT 0.92 SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 0.95 KP 1.03 ! LA 1.01 MK 1.00 NL 1.11 OV 0.93 ! PT 0.93 SC 1.06 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 0.99 KP 1.03 ! LA 1.01 MK 1.00 NL 1.10 OV 0.93 ! PT 0.92 SC 1.07 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 0.97 KP 1.05 ! LA 1.03 MK 1.00 NL 1.10 OV 0.94 ! PT 0.92 SC 1.07 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.98 KP 1.03 ! LA 1.02 MK 1.00 NL 1.10 OV 0.92 ! PT 0.91 SC 1.06 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.97 KP 1.04 ! LA 1.00 MK 1.02 NL 1.10 OV 0.94 ! PT 0.92 SC 1.08 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 0.97 KP 1.02 ! LA 1.00 MK 1.00 NL 1.12 OV 0.93 ! PT 0.94 SC 1.10 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 0.97 KP 1.03 ! LA 1.01 MK 1.01 NL 1.09 OV 0.94 ! PT 0.92 SC 1.09 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.98 KP 1.03 ! LA 1.03 MK 0.98 NL 1.08 OV 0.94 ! PT 0.93 SC 1.09 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.00 KP 1.05 ! LA 1.03 MK 1.00 NL 1.10 OV 0.94 ! PT 0.92 SC 1.10 ! ! ! Fit before self-cal, rms=0.089148Jy sigma=0.623780 ! Fit after self-cal, rms=0.081619Jy sigma=0.553008 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9692 mas, bmaj=1.29 mas, bpa=-17.6 degrees ! Estimated noise=0.477383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0110658 Jy ! Component: 100 - total flux cleaned = -0.0190898 Jy ! Component: 150 - total flux cleaned = -0.0251769 Jy ! Component: 200 - total flux cleaned = -0.0283823 Jy ! Total flux subtracted in 200 components = -0.0283823 Jy ! Clean residual min=-0.011202 max=0.011543 Jy/beam ! Clean residual mean=0.000007 rms=0.001933 Jy/beam ! Combined flux in latest and established models = 0.658133 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.658133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079446Jy sigma=0.536503 ! Fit after self-cal, rms=0.079312Jy sigma=0.535477 ! Inverting map ! Added new window around map position (32.8, -14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107797 Jy ! Component: 100 - total flux cleaned = 0.0108735 Jy ! Component: 150 - total flux cleaned = 0.00936346 Jy ! Component: 200 - total flux cleaned = 0.00819748 Jy ! Total flux subtracted in 200 components = 0.00819748 Jy ! Clean residual min=-0.009773 max=0.009475 Jy/beam ! Clean residual mean=0.000004 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 0.66633 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 93 components and 0.66633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077061Jy sigma=0.522963 ! Fit after self-cal, rms=0.076956Jy sigma=0.522096 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076956Jy sigma=0.522096 ! Fit after self-cal, rms=0.070880Jy sigma=0.443456 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9671 mas, bmaj=1.303 mas, bpa=-14.28 degrees ! Estimated noise=0.480132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0064475 Jy ! Component: 100 - total flux cleaned = -0.00919609 Jy ! Component: 150 - total flux cleaned = -0.0115861 Jy ! Component: 200 - total flux cleaned = -0.0133214 Jy ! Total flux subtracted in 200 components = -0.0133214 Jy ! Clean residual min=-0.005624 max=0.004011 Jy/beam ! Clean residual mean=0.000004 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.653009 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 105 components and 0.653009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069630Jy sigma=0.434686 ! Fit after self-cal, rms=0.069482Jy sigma=0.433499 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00204761 Jy ! Component: 100 - total flux cleaned = -0.00343419 Jy ! Component: 150 - total flux cleaned = -0.00486001 Jy ! Component: 200 - total flux cleaned = -0.00556935 Jy ! Total flux subtracted in 200 components = -0.00556935 Jy ! Clean residual min=-0.005228 max=0.003645 Jy/beam ! Clean residual mean=0.000003 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.647439 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 114 components and 0.647439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069034Jy sigma=0.430157 ! Fit after self-cal, rms=0.068947Jy sigma=0.429775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068947Jy sigma=0.429775 ! Fit after self-cal, rms=0.069510Jy sigma=0.427454 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9659 mas, bmaj=1.302 mas, bpa=-14.08 degrees ! Estimated noise=0.479782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00405069 Jy ! Component: 100 - total flux cleaned = -0.00596384 Jy ! Component: 150 - total flux cleaned = -0.00735818 Jy ! Component: 200 - total flux cleaned = -0.00860397 Jy ! Total flux subtracted in 200 components = -0.00860397 Jy ! Clean residual min=-0.004545 max=0.003384 Jy/beam ! Clean residual mean=0.000002 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.638835 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 116 components and 0.638835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068946Jy sigma=0.423507 ! Fit after self-cal, rms=0.068852Jy sigma=0.423021 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013093 Jy ! Component: 100 - total flux cleaned = -0.00228074 Jy ! Component: 150 - total flux cleaned = -0.00272958 Jy ! Component: 200 - total flux cleaned = -0.00298623 Jy ! Total flux subtracted in 200 components = -0.00298623 Jy ! Clean residual min=-0.004279 max=0.003156 Jy/beam ! Clean residual mean=0.000002 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.635849 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 0.635849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068583Jy sigma=0.420997 ! Fit after self-cal, rms=0.068543Jy sigma=0.420849 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068543Jy sigma=0.420849 ! Fit after self-cal, rms=0.069078Jy sigma=0.419893 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.375 mas, bmaj=2.566 mas, bpa=15.08 degrees ! Estimated noise=0.632354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0038469 Jy ! Component: 100 - total flux cleaned = -0.00639316 Jy ! Component: 150 - total flux cleaned = -0.00826156 Jy ! Component: 200 - total flux cleaned = -0.00970498 Jy ! Total flux subtracted in 200 components = -0.00970498 Jy ! Clean residual min=-0.004097 max=0.004098 Jy/beam ! Clean residual mean=0.000004 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.626144 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 136 components and 0.626144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068934Jy sigma=0.418644 ! Fit after self-cal, rms=0.068888Jy sigma=0.418427 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000903588 Jy ! Component: 100 - total flux cleaned = -0.00169856 Jy ! Component: 150 - total flux cleaned = -0.00222711 Jy ! Component: 200 - total flux cleaned = -0.00251328 Jy ! Total flux subtracted in 200 components = -0.00251328 Jy ! Clean residual min=-0.003958 max=0.003954 Jy/beam ! Clean residual mean=0.000003 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.623631 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 138 components and 0.623631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068802Jy sigma=0.417653 ! Fit after self-cal, rms=0.068779Jy sigma=0.417553 ! Inverting map ! Added new window around map position (-11.6, -26.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360289 Jy ! Component: 100 - total flux cleaned = 0.00527592 Jy ! Component: 150 - total flux cleaned = 0.00535164 Jy ! Component: 200 - total flux cleaned = 0.00547808 Jy ! Total flux subtracted in 200 components = 0.00547808 Jy ! Clean residual min=-0.004081 max=0.002639 Jy/beam ! Clean residual mean=0.000001 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.629109 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 161 components and 0.629109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068627Jy sigma=0.416707 ! Fit after self-cal, rms=0.068620Jy sigma=0.416595 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.965 mas, bmaj=1.302 mas, bpa=-13.94 degrees ! Estimated noise=0.479343 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.965 x 1.302 at -13.94 degrees (North through East) ! Clean map min=-0.0043061 max=0.49443 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7213 mas, bmaj=1.027 mas, bpa=-14.64 degrees ! Estimated noise=1.05186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.370031 Jy ! Component: 100 - total flux cleaned = 0.468175 Jy ! Component: 150 - total flux cleaned = 0.513643 Jy ! Component: 200 - total flux cleaned = 0.53977 Jy ! Total flux subtracted in 200 components = 0.53977 Jy ! Clean residual min=-0.006918 max=0.013686 Jy/beam ! Clean residual mean=-0.000005 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.53977 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.53977 Jy ! Inverting map and beam ! Estimated beam: bmin=0.965 mas, bmaj=1.302 mas, bpa=-13.94 degrees ! Estimated noise=0.479343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250079 Jy ! Component: 100 - total flux cleaned = 0.0393247 Jy ! Component: 150 - total flux cleaned = 0.0491223 Jy ! Component: 200 - total flux cleaned = 0.0567063 Jy ! Total flux subtracted in 200 components = 0.0567063 Jy ! Clean residual min=-0.003599 max=0.006071 Jy/beam ! Clean residual mean=-0.000004 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.596477 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 0.596476 Jy ! Inverting map ! Added new window around map position (-1, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00671308 Jy ! Component: 100 - total flux cleaned = 0.0120588 Jy ! Component: 150 - total flux cleaned = 0.0166365 Jy ! Component: 200 - total flux cleaned = 0.0203131 Jy ! Total flux subtracted in 200 components = 0.0203131 Jy ! Clean residual min=-0.003490 max=0.003850 Jy/beam ! Clean residual mean=-0.000000 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.61679 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 63 components and 0.616789 Jy ! Inverting map ! Added new window around map position (-22.8, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367617 Jy ! Component: 100 - total flux cleaned = 0.00586154 Jy ! Component: 150 - total flux cleaned = 0.00739665 Jy ! Component: 200 - total flux cleaned = 0.00860965 Jy ! Total flux subtracted in 200 components = 0.00860965 Jy ! Clean residual min=-0.003494 max=0.003403 Jy/beam ! Clean residual mean=0.000001 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.625399 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 80 components and 0.625399 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.375 mas, bmaj=2.566 mas, bpa=15.08 degrees ! Estimated noise=0.632354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184798 Jy ! Component: 100 - total flux cleaned = 0.00286722 Jy ! Component: 150 - total flux cleaned = 0.00347487 Jy ! Component: 200 - total flux cleaned = 0.00386022 Jy ! Total flux subtracted in 200 components = 0.00386022 Jy ! Clean residual min=-0.003314 max=0.002900 Jy/beam ! Clean residual mean=0.000001 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.629259 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284324 Jy ! Component: 100 - total flux cleaned = 0.000551077 Jy ! Component: 150 - total flux cleaned = 0.000859391 Jy ! Component: 200 - total flux cleaned = 0.00103107 Jy ! Total flux subtracted in 200 components = 0.00103107 Jy ! Clean residual min=-0.003148 max=0.002721 Jy/beam ! Clean residual mean=0.000001 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.63029 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 126 components and 0.630291 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.965 mas, bmaj=1.302 mas, bpa=-13.94 degrees ! Estimated noise=0.479343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105781 Jy ! Component: 100 - total flux cleaned = 0.00182595 Jy ! Component: 150 - total flux cleaned = 0.00217859 Jy ! Component: 200 - total flux cleaned = 0.00258985 Jy ! Total flux subtracted in 200 components = 0.00258985 Jy ! Clean residual min=-0.003198 max=0.002905 Jy/beam ! Clean residual mean=0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.63288 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 133 components and 0.63288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069138Jy sigma=0.412763 ! Fit after self-cal, rms=0.068931Jy sigma=0.411327 wmodel J2006+6424_X_map.mod ! Writing 133 model components to file: J2006+6424_X_map.mod wobs J2006+6424_X_uvs.fits ! Writing UV FITS file: J2006+6424_X_uvs.fits wwins J2006+6424_X_map.win ! wwins: Wrote 9 windows to J2006+6424_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100526 Jy ! Component: 100 - total flux cleaned = -0.00100941 Jy ! Component: 150 - total flux cleaned = -0.000691076 Jy ! Component: 200 - total flux cleaned = -0.000472634 Jy ! Component: 250 - total flux cleaned = -0.000344504 Jy ! Component: 300 - total flux cleaned = -0.000219926 Jy ! Component: 350 - total flux cleaned = -9.81242e-05 Jy ! Component: 400 - total flux cleaned = -5.87478e-05 Jy ! Component: 450 - total flux cleaned = -5.86981e-05 Jy ! Component: 500 - total flux cleaned = 5.74438e-05 Jy ! Component: 550 - total flux cleaned = 9.49813e-05 Jy ! Component: 600 - total flux cleaned = -1.70437e-05 Jy ! Component: 650 - total flux cleaned = -1.70395e-05 Jy ! Component: 700 - total flux cleaned = -0.000125706 Jy ! Component: 750 - total flux cleaned = -0.000125629 Jy ! Component: 800 - total flux cleaned = -0.000267246 Jy ! Component: 850 - total flux cleaned = -0.000442108 Jy ! Component: 900 - total flux cleaned = -0.000580284 Jy ! Component: 950 - total flux cleaned = -0.000750935 Jy ! Component: 1000 - total flux cleaned = -0.000885616 Jy ! Component: 1050 - total flux cleaned = -0.00101915 Jy ! Component: 1100 - total flux cleaned = -0.00108522 Jy ! Component: 1150 - total flux cleaned = -0.00121627 Jy ! Component: 1200 - total flux cleaned = -0.00134528 Jy ! Component: 1250 - total flux cleaned = -0.00150485 Jy ! Component: 1300 - total flux cleaned = -0.00153637 Jy ! Component: 1350 - total flux cleaned = -0.00166135 Jy ! Component: 1400 - total flux cleaned = -0.00172292 Jy ! Component: 1450 - total flux cleaned = -0.00184575 Jy ! Component: 1500 - total flux cleaned = -0.00187616 Jy ! Component: 1550 - total flux cleaned = -0.00190599 Jy ! Component: 1600 - total flux cleaned = -0.00199582 Jy ! Component: 1650 - total flux cleaned = -0.00211428 Jy ! Component: 1700 - total flux cleaned = -0.00214376 Jy ! Component: 1750 - total flux cleaned = -0.00228896 Jy ! Component: 1800 - total flux cleaned = -0.00226003 Jy ! Component: 1850 - total flux cleaned = -0.0022602 Jy ! Component: 1900 - total flux cleaned = -0.00228861 Jy ! Component: 1950 - total flux cleaned = -0.00237237 Jy ! Component: 2000 - total flux cleaned = -0.00237241 Jy ! Component: 2050 - total flux cleaned = -0.0024827 Jy ! Component: 2100 - total flux cleaned = -0.00248251 Jy ! Component: 2150 - total flux cleaned = -0.00253633 Jy ! Component: 2200 - total flux cleaned = -0.00250949 Jy ! Component: 2250 - total flux cleaned = -0.00253598 Jy ! Component: 2300 - total flux cleaned = -0.002615 Jy ! Component: 2350 - total flux cleaned = -0.00258879 Jy ! Component: 2400 - total flux cleaned = -0.0025888 Jy ! Component: 2450 - total flux cleaned = -0.00266636 Jy ! Component: 2500 - total flux cleaned = -0.002692 Jy ! Component: 2550 - total flux cleaned = -0.00269181 Jy ! Component: 2600 - total flux cleaned = -0.00276748 Jy ! Component: 2650 - total flux cleaned = -0.00271728 Jy ! Component: 2700 - total flux cleaned = -0.00281644 Jy ! Component: 2750 - total flux cleaned = -0.00274238 Jy ! Component: 2800 - total flux cleaned = -0.00281577 Jy ! Component: 2850 - total flux cleaned = -0.0028401 Jy ! Component: 2900 - total flux cleaned = -0.00281584 Jy ! Component: 2950 - total flux cleaned = -0.00276797 Jy ! Component: 3000 - total flux cleaned = -0.00283938 Jy ! Component: 3050 - total flux cleaned = -0.00281555 Jy ! Component: 3100 - total flux cleaned = -0.00286215 Jy ! Component: 3150 - total flux cleaned = -0.00281558 Jy ! Component: 3200 - total flux cleaned = -0.00279253 Jy ! Component: 3250 - total flux cleaned = -0.00281544 Jy ! Component: 3300 - total flux cleaned = -0.00283823 Jy ! Component: 3350 - total flux cleaned = -0.00281553 Jy ! Component: 3400 - total flux cleaned = -0.00286043 Jy ! Component: 3450 - total flux cleaned = -0.00283803 Jy ! Component: 3500 - total flux cleaned = -0.00279361 Jy ! Component: 3550 - total flux cleaned = -0.00290365 Jy ! Component: 3600 - total flux cleaned = -0.00288187 Jy ! Component: 3650 - total flux cleaned = -0.00294694 Jy ! Component: 3700 - total flux cleaned = -0.00301165 Jy ! Component: 3750 - total flux cleaned = -0.00299034 Jy ! Component: 3800 - total flux cleaned = -0.00299041 Jy ! Component: 3850 - total flux cleaned = -0.00303281 Jy ! Component: 3900 - total flux cleaned = -0.00307497 Jy ! Component: 3950 - total flux cleaned = -0.00305418 Jy ! Component: 4000 - total flux cleaned = -0.00307498 Jy ! Component: 4050 - total flux cleaned = -0.00311605 Jy ! Total flux subtracted in 4096 components = -0.00311599 Jy ! Clean residual min=-0.001025 max=0.001026 Jy/beam ! Clean residual mean=0.000000 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.629764 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 396 components and 0.629764 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2006+6424_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.965 x 1.302 at -13.94 degrees (North through East) ! Clean map min=-0.0030906 max=0.49822 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2006+6424_X_map.fits wmodel /image_prod/ug002_uva//J2006+6424_X_map.mod ! Writing 396 model components to file: /image_prod/ug002_uva//J2006+6424_X_map.mod wobs /image_prod/ug002_uva//J2006+6424_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2006+6424_X_uvs.fits wwins /image_prod/ug002_uva//J2006+6424_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J2006+6424_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.498225 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000326323 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.196491 0.196491 0.392983 0.785965 1.57193 3.14386 6.28772 12.5754 25.1509 50.3018 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.498 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1526.79 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2006+6424_X_dfm.log closed on Thu Mar 5 04:35:26 2020