! Started logfile: /image_prod/ug002_uva//J2001+3323_X_dfm.log on Thu Mar 5 04:31:18 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2001+3323_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2001+3323_X_uva.fits ! AN table 1: 111 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.917417 visibilities/baseline/integration-bin. ! Found source: J2001+3323 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 43992 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2001+3323_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.037212Jy sigma=9.663467 ! Fit after self-cal, rms=0.812244Jy sigma=7.739030 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6866 mas, bmaj=2.054 mas, bpa=-17.53 degrees ! Estimated noise=0.844258 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12091 Jy ! Component: 100 - total flux cleaned = 0.191134 Jy ! Total flux subtracted in 100 components = 0.191134 Jy ! Clean residual min=-0.015761 max=0.038740 Jy/beam ! Clean residual mean=-0.000018 rms=0.005023 Jy/beam ! Combined flux in latest and established models = 0.191134 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.191134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.159663Jy sigma=1.354256 ! Fit after self-cal, rms=0.159075Jy sigma=1.348164 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516055 Jy ! Component: 100 - total flux cleaned = 0.0905689 Jy ! Total flux subtracted in 100 components = 0.0905689 Jy ! Clean residual min=-0.010229 max=0.024820 Jy/beam ! Clean residual mean=-0.000012 rms=0.003313 Jy/beam ! Combined flux in latest and established models = 0.281703 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 56 components and 0.281703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115515Jy sigma=0.978753 ! Fit after self-cal, rms=0.115337Jy sigma=0.977182 ! Inverting map ! Added new window around map position (1, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311368 Jy ! Component: 100 - total flux cleaned = 0.0557629 Jy ! Total flux subtracted in 100 components = 0.0557629 Jy ! Clean residual min=-0.007337 max=0.019038 Jy/beam ! Clean residual mean=-0.000009 rms=0.002404 Jy/beam ! Combined flux in latest and established models = 0.337465 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 73 components and 0.337465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092169Jy sigma=0.787921 ! Fit after self-cal, rms=0.092040Jy sigma=0.786785 ! Inverting map ! Added new window around map position (-1.2, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214434 Jy ! Component: 100 - total flux cleaned = 0.0387656 Jy ! Total flux subtracted in 100 components = 0.0387656 Jy ! Clean residual min=-0.005731 max=0.010609 Jy/beam ! Clean residual mean=-0.000007 rms=0.001828 Jy/beam ! Combined flux in latest and established models = 0.376231 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 104 components and 0.376231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078168Jy sigma=0.677074 ! Fit after self-cal, rms=0.078091Jy sigma=0.676479 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015053 Jy ! Component: 100 - total flux cleaned = 0.0277836 Jy ! Total flux subtracted in 100 components = 0.0277836 Jy ! Clean residual min=-0.004871 max=0.007920 Jy/beam ! Clean residual mean=-0.000006 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 0.404015 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 118 components and 0.404015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069604Jy sigma=0.611174 ! Fit after self-cal, rms=0.069561Jy sigma=0.610910 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.917 mas, bmaj=2.241 mas, bpa=-16.08 degrees ! Estimated noise=0.366534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228568 Jy ! Component: 100 - total flux cleaned = 0.0401986 Jy ! Component: 150 - total flux cleaned = 0.0538059 Jy ! Component: 200 - total flux cleaned = 0.0646486 Jy ! Total flux subtracted in 200 components = 0.0646486 Jy ! Clean residual min=-0.003827 max=0.007578 Jy/beam ! Clean residual mean=-0.000008 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.468663 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 164 components and 0.468663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055802Jy sigma=0.510293 ! Fit after self-cal, rms=0.055710Jy sigma=0.509848 ! Inverting map ! Added new window around map position (-0.4, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00901189 Jy ! Component: 100 - total flux cleaned = 0.016217 Jy ! Component: 150 - total flux cleaned = 0.0220823 Jy ! Component: 200 - total flux cleaned = 0.0268828 Jy ! Total flux subtracted in 200 components = 0.0268828 Jy ! Clean residual min=-0.002882 max=0.005131 Jy/beam ! Clean residual mean=-0.000005 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.495546 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 189 components and 0.495546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052970Jy sigma=0.491261 ! Fit after self-cal, rms=0.052932Jy sigma=0.490905 ! Inverting map ! Added new window around map position (0.6, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500812 Jy ! Component: 100 - total flux cleaned = 0.00881403 Jy ! Component: 150 - total flux cleaned = 0.0119813 Jy ! Component: 200 - total flux cleaned = 0.0146442 Jy ! Total flux subtracted in 200 components = 0.0146442 Jy ! Clean residual min=-0.002203 max=0.002288 Jy/beam ! Clean residual mean=-0.000004 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.51019 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 225 components and 0.51019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052100Jy sigma=0.485049 ! Fit after self-cal, rms=0.052085Jy sigma=0.484888 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.917 x 2.241 at -16.08 degrees (North through East) ! Clean map min=-0.0021923 max=0.16461 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 KP 0.99 LA 1.00 ! MK 1.22 NL 1.05 OV 1.03 PT 0.95 ! SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 KP 1.01 LA 1.00 ! MK 1.12 NL 1.04 OV 1.02 PT 0.95 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 KP 1.01 LA 1.01 ! MK 1.03 NL 1.06 OV 1.02 PT 0.94 ! SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 KP 0.99 LA 1.01 ! MK 1.11 NL 1.00 OV 1.02 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 KP 1.00 LA 1.02 ! MK 1.06 NL 1.00 OV 1.02 PT 0.95 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 KP 1.02 LA 1.00 ! MK 0.99 NL 1.00 OV 1.03 PT 0.97 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 KP 1.00 LA 1.02 ! MK 0.99 NL 1.02 OV 1.01 PT 0.96 ! SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 KP 0.99 LA 0.99 ! MK 0.96 NL 1.02 OV 0.97 PT 0.97 ! SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 KP 1.00 LA 0.99 ! MK 0.90 NL 1.01 OV 0.99 PT 0.99 ! SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 KP 0.99 LA 1.01 ! MK 0.93 NL 0.96 OV 1.02 PT 0.96 ! SC 0.90 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 KP 0.98 LA 0.99 ! MK 0.80 NL 1.02 OV 0.99 PT 0.96 ! SC 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 KP 1.00 LA 1.01 ! MK 0.78 NL 0.98 OV 1.01 PT 0.94 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.052085Jy sigma=0.484888 ! Fit after self-cal, rms=0.050371Jy sigma=0.477789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9117 mas, bmaj=2.237 mas, bpa=-16.12 degrees ! Estimated noise=0.363013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000878489 Jy ! Component: 100 - total flux cleaned = 0.00132508 Jy ! Component: 150 - total flux cleaned = 0.00165177 Jy ! Component: 200 - total flux cleaned = 0.00184527 Jy ! Total flux subtracted in 200 components = 0.00184527 Jy ! Clean residual min=-0.001121 max=0.001415 Jy/beam ! Clean residual mean=0.000000 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.512036 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 241 components and 0.512036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050338Jy sigma=0.477481 ! Fit after self-cal, rms=0.050327Jy sigma=0.477449 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050327Jy sigma=0.477449 ! Fit after self-cal, rms=0.050208Jy sigma=0.476211 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9128 mas, bmaj=2.238 mas, bpa=-15.9 degrees ! Estimated noise=0.36305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552265 Jy ! Component: 100 - total flux cleaned = 0.00091693 Jy ! Component: 150 - total flux cleaned = 0.00115587 Jy ! Component: 200 - total flux cleaned = 0.00129645 Jy ! Total flux subtracted in 200 components = 0.00129645 Jy ! Clean residual min=-0.000907 max=0.001127 Jy/beam ! Clean residual mean=-0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.513332 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 252 components and 0.513332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050188Jy sigma=0.476033 ! Fit after self-cal, rms=0.050190Jy sigma=0.476021 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (31.6, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848786 Jy ! Component: 100 - total flux cleaned = 0.000869185 Jy ! Component: 150 - total flux cleaned = 0.000888625 Jy ! Component: 200 - total flux cleaned = 0.0009442 Jy ! Total flux subtracted in 200 components = 0.0009442 Jy ! Clean residual min=-0.000896 max=0.001127 Jy/beam ! Clean residual mean=-0.000000 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.514276 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 265 components and 0.514276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050167Jy sigma=0.475809 ! Fit after self-cal, rms=0.050167Jy sigma=0.475794 ! Inverting map ! Added new window around map position (16.2, -33.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360417 Jy ! Component: 100 - total flux cleaned = 0.000279008 Jy ! Component: 150 - total flux cleaned = 0.00027719 Jy ! Component: 200 - total flux cleaned = 0.000356437 Jy ! Total flux subtracted in 200 components = 0.000356437 Jy ! Clean residual min=-0.000880 max=0.000939 Jy/beam ! Clean residual mean=-0.000000 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.514633 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 282 components and 0.514633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050140Jy sigma=0.475536 ! Fit after self-cal, rms=0.050139Jy sigma=0.475514 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050139Jy sigma=0.475514 ! Fit after self-cal, rms=0.049875Jy sigma=0.475347 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9071 mas, bmaj=2.233 mas, bpa=-15.75 degrees ! Estimated noise=0.360756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402885 Jy ! Component: 100 - total flux cleaned = 0.000636108 Jy ! Component: 150 - total flux cleaned = 0.000732268 Jy ! Component: 200 - total flux cleaned = 0.000750492 Jy ! Total flux subtracted in 200 components = 0.000750492 Jy ! Clean residual min=-0.000849 max=0.000868 Jy/beam ! Clean residual mean=0.000000 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.515383 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 297 components and 0.515383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049861Jy sigma=0.475204 ! Fit after self-cal, rms=0.049862Jy sigma=0.475196 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.95503e-05 Jy ! Component: 100 - total flux cleaned = 9.49939e-05 Jy ! Component: 150 - total flux cleaned = 0.000111448 Jy ! Component: 200 - total flux cleaned = 0.000160866 Jy ! Total flux subtracted in 200 components = 0.000160866 Jy ! Clean residual min=-0.000856 max=0.000845 Jy/beam ! Clean residual mean=0.000000 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.515544 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 304 components and 0.515544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049853Jy sigma=0.475090 ! Fit after self-cal, rms=0.049853Jy sigma=0.475085 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049853Jy sigma=0.475085 ! Fit after self-cal, rms=0.049723Jy sigma=0.475073 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=2.79 mas, bpa=-1.961 degrees ! Estimated noise=0.469211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578497 Jy ! Component: 100 - total flux cleaned = 0.000834481 Jy ! Component: 150 - total flux cleaned = 0.000966475 Jy ! Component: 200 - total flux cleaned = 0.00105837 Jy ! Total flux subtracted in 200 components = 0.00105837 Jy ! Clean residual min=-0.000886 max=0.000963 Jy/beam ! Clean residual mean=0.000001 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.516603 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 328 components and 0.516603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049719Jy sigma=0.475049 ! Fit after self-cal, rms=0.049719Jy sigma=0.475047 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010723 Jy ! Component: 100 - total flux cleaned = 0.000141541 Jy ! Component: 150 - total flux cleaned = 0.000141168 Jy ! Component: 200 - total flux cleaned = 0.000131103 Jy ! Total flux subtracted in 200 components = 0.000131103 Jy ! Clean residual min=-0.000909 max=0.000960 Jy/beam ! Clean residual mean=0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.516734 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 333 components and 0.516734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049718Jy sigma=0.475032 ! Fit after self-cal, rms=0.049718Jy sigma=0.475031 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9051 mas, bmaj=2.231 mas, bpa=-15.73 degrees ! Estimated noise=0.359879 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9051 x 2.231 at -15.73 degrees (North through East) ! Clean map min=-0.0010388 max=0.16078 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6793 mas, bmaj=2.045 mas, bpa=-17.18 degrees ! Estimated noise=0.822968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118794 Jy ! Component: 100 - total flux cleaned = 0.190757 Jy ! Component: 150 - total flux cleaned = 0.241799 Jy ! Component: 200 - total flux cleaned = 0.280839 Jy ! Total flux subtracted in 200 components = 0.280839 Jy ! Clean residual min=-0.010405 max=0.023032 Jy/beam ! Clean residual mean=-0.000012 rms=0.003229 Jy/beam ! Combined flux in latest and established models = 0.280839 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.280839 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9051 mas, bmaj=2.231 mas, bpa=-15.73 degrees ! Estimated noise=0.359879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0566253 Jy ! Component: 100 - total flux cleaned = 0.095255 Jy ! Component: 150 - total flux cleaned = 0.123336 Jy ! Component: 200 - total flux cleaned = 0.144606 Jy ! Total flux subtracted in 200 components = 0.144606 Jy ! Clean residual min=-0.006234 max=0.012372 Jy/beam ! Clean residual mean=-0.000010 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.425445 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 121 components and 0.425445 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165081 Jy ! Component: 100 - total flux cleaned = 0.0295576 Jy ! Component: 150 - total flux cleaned = 0.040038 Jy ! Component: 200 - total flux cleaned = 0.0485225 Jy ! Total flux subtracted in 200 components = 0.0485225 Jy ! Clean residual min=-0.002877 max=0.005090 Jy/beam ! Clean residual mean=-0.000004 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.473968 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 164 components and 0.473968 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00691202 Jy ! Component: 100 - total flux cleaned = 0.0125684 Jy ! Component: 150 - total flux cleaned = 0.0172151 Jy ! Component: 200 - total flux cleaned = 0.0210618 Jy ! Total flux subtracted in 200 components = 0.0210618 Jy ! Clean residual min=-0.001656 max=0.002350 Jy/beam ! Clean residual mean=-0.000002 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.495029 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 187 components and 0.495029 Jy ! Inverting map ! Added new window around map position (2.2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320605 Jy ! Component: 100 - total flux cleaned = 0.0058856 Jy ! Component: 150 - total flux cleaned = 0.00813315 Jy ! Component: 200 - total flux cleaned = 0.0100355 Jy ! Total flux subtracted in 200 components = 0.0100355 Jy ! Clean residual min=-0.001181 max=0.001233 Jy/beam ! Clean residual mean=-0.000001 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.505065 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 207 components and 0.505065 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=2.79 mas, bpa=-1.961 degrees ! Estimated noise=0.469211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266576 Jy ! Component: 100 - total flux cleaned = 0.00457716 Jy ! Component: 150 - total flux cleaned = 0.00608526 Jy ! Component: 200 - total flux cleaned = 0.0072878 Jy ! Total flux subtracted in 200 components = 0.0072878 Jy ! Clean residual min=-0.001079 max=0.001041 Jy/beam ! Clean residual mean=-0.000001 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.512353 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100739 Jy ! Component: 100 - total flux cleaned = 0.00184011 Jy ! Component: 150 - total flux cleaned = 0.00250059 Jy ! Component: 200 - total flux cleaned = 0.00307325 Jy ! Total flux subtracted in 200 components = 0.00307325 Jy ! Clean residual min=-0.000870 max=0.000946 Jy/beam ! Clean residual mean=0.000000 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.515426 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 266 components and 0.515426 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9051 mas, bmaj=2.231 mas, bpa=-15.73 degrees ! Estimated noise=0.359879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476837 Jy ! Component: 100 - total flux cleaned = 0.000609494 Jy ! Component: 150 - total flux cleaned = 0.000814996 Jy ! Component: 200 - total flux cleaned = 0.00103053 Jy ! Total flux subtracted in 200 components = 0.00103053 Jy ! Clean residual min=-0.000900 max=0.000964 Jy/beam ! Clean residual mean=0.000000 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.516456 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 291 components and 0.516456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049745Jy sigma=0.475241 ! Fit after self-cal, rms=0.049735Jy sigma=0.475102 wmodel J2001+3323_X_map.mod ! Writing 291 model components to file: J2001+3323_X_map.mod wobs J2001+3323_X_uvs.fits ! Writing UV FITS file: J2001+3323_X_uvs.fits wwins J2001+3323_X_map.win ! wwins: Wrote 8 windows to J2001+3323_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.49892e-05 Jy ! Component: 100 - total flux cleaned = 0.00014289 Jy ! Component: 150 - total flux cleaned = 0.000276087 Jy ! Component: 200 - total flux cleaned = 0.000389428 Jy ! Component: 250 - total flux cleaned = 0.000471373 Jy ! Component: 300 - total flux cleaned = 0.000524674 Jy ! Component: 350 - total flux cleaned = 0.000576653 Jy ! Component: 400 - total flux cleaned = 0.000576363 Jy ! Component: 450 - total flux cleaned = 0.000625896 Jy ! Component: 500 - total flux cleaned = 0.000674427 Jy ! Component: 550 - total flux cleaned = 0.000686283 Jy ! Component: 600 - total flux cleaned = 0.000745098 Jy ! Component: 650 - total flux cleaned = 0.00076797 Jy ! Component: 700 - total flux cleaned = 0.000790753 Jy ! Component: 750 - total flux cleaned = 0.000813033 Jy ! Component: 800 - total flux cleaned = 0.000835075 Jy ! Component: 850 - total flux cleaned = 0.000835223 Jy ! Component: 900 - total flux cleaned = 0.000824604 Jy ! Component: 950 - total flux cleaned = 0.000824887 Jy ! Component: 1000 - total flux cleaned = 0.000845607 Jy ! Component: 1050 - total flux cleaned = 0.000815065 Jy ! Component: 1100 - total flux cleaned = 0.000835304 Jy ! Component: 1150 - total flux cleaned = 0.000795459 Jy ! Component: 1200 - total flux cleaned = 0.000805668 Jy ! Component: 1250 - total flux cleaned = 0.000824975 Jy ! Component: 1300 - total flux cleaned = 0.000766936 Jy ! Component: 1350 - total flux cleaned = 0.000786004 Jy ! Component: 1400 - total flux cleaned = 0.000776568 Jy ! Component: 1450 - total flux cleaned = 0.0007394 Jy ! Component: 1500 - total flux cleaned = 0.000785401 Jy ! Component: 1550 - total flux cleaned = 0.000785446 Jy ! Component: 1600 - total flux cleaned = 0.000794575 Jy ! Component: 1650 - total flux cleaned = 0.000803545 Jy ! Component: 1700 - total flux cleaned = 0.000776898 Jy ! Component: 1750 - total flux cleaned = 0.000776913 Jy ! Component: 1800 - total flux cleaned = 0.000742395 Jy ! Component: 1850 - total flux cleaned = 0.000733859 Jy ! Component: 1900 - total flux cleaned = 0.000733945 Jy ! Component: 1950 - total flux cleaned = 0.000717064 Jy ! Component: 2000 - total flux cleaned = 0.000725402 Jy ! Component: 2050 - total flux cleaned = 0.00070056 Jy ! Component: 2100 - total flux cleaned = 0.000676023 Jy ! Component: 2150 - total flux cleaned = 0.000684115 Jy ! Component: 2200 - total flux cleaned = 0.000676006 Jy ! Component: 2250 - total flux cleaned = 0.000628134 Jy ! Component: 2300 - total flux cleaned = 0.000612381 Jy ! Component: 2350 - total flux cleaned = 0.000604475 Jy ! Component: 2400 - total flux cleaned = 0.000619892 Jy ! Component: 2450 - total flux cleaned = 0.000581298 Jy ! Component: 2500 - total flux cleaned = 0.000588903 Jy ! Component: 2550 - total flux cleaned = 0.000596433 Jy ! Component: 2600 - total flux cleaned = 0.000566206 Jy ! Component: 2650 - total flux cleaned = 0.000566091 Jy ! Component: 2700 - total flux cleaned = 0.000529065 Jy ! Component: 2750 - total flux cleaned = 0.000529095 Jy ! Component: 2800 - total flux cleaned = 0.000529105 Jy ! Component: 2850 - total flux cleaned = 0.000514602 Jy ! Component: 2900 - total flux cleaned = 0.000507424 Jy ! Component: 2950 - total flux cleaned = 0.000493093 Jy ! Component: 3000 - total flux cleaned = 0.000478971 Jy ! Component: 3050 - total flux cleaned = 0.000457986 Jy ! Component: 3100 - total flux cleaned = 0.000457949 Jy ! Component: 3150 - total flux cleaned = 0.000471732 Jy ! Component: 3200 - total flux cleaned = 0.000437407 Jy ! Component: 3250 - total flux cleaned = 0.000437427 Jy ! Component: 3300 - total flux cleaned = 0.000417023 Jy ! Component: 3350 - total flux cleaned = 0.000383375 Jy ! Component: 3400 - total flux cleaned = 0.000376607 Jy ! Component: 3450 - total flux cleaned = 0.000383309 Jy ! Component: 3500 - total flux cleaned = 0.000383267 Jy ! Component: 3550 - total flux cleaned = 0.000356844 Jy ! Component: 3600 - total flux cleaned = 0.000343734 Jy ! Component: 3650 - total flux cleaned = 0.000330828 Jy ! Component: 3700 - total flux cleaned = 0.000350162 Jy ! Component: 3750 - total flux cleaned = 0.000324413 Jy ! Component: 3800 - total flux cleaned = 0.000311602 Jy ! Component: 3850 - total flux cleaned = 0.000279907 Jy ! Component: 3900 - total flux cleaned = 0.000279903 Jy ! Component: 3950 - total flux cleaned = 0.000273615 Jy ! Component: 4000 - total flux cleaned = 0.000279824 Jy ! Component: 4050 - total flux cleaned = 0.000248825 Jy ! Total flux subtracted in 4096 components = 0.000261145 Jy ! Clean residual min=-0.000346 max=0.000323 Jy/beam ! Clean residual mean=0.000000 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.516717 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 606 components and 0.516717 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2001+3323_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9051 x 2.231 at -15.73 degrees (North through East) ! Clean map min=-0.00055816 max=0.16024 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2001+3323_X_map.fits wmodel /image_prod/ug002_uva//J2001+3323_X_map.mod ! Writing 606 model components to file: /image_prod/ug002_uva//J2001+3323_X_map.mod wobs /image_prod/ug002_uva//J2001+3323_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2001+3323_X_uvs.fits wwins /image_prod/ug002_uva//J2001+3323_X_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J2001+3323_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.16024 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000109084 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.204226 0.204226 0.408452 0.816905 1.63381 3.26762 6.53524 13.0705 26.141 52.2819 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.16 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1468.96 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2001+3323_X_dfm.log closed on Thu Mar 5 04:31:26 2020